Reactor
Filter
Showing 121–150 of 447 results
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Producer |
| Model | GR-100 |
| Capacity | 100 L (Working Volume) |
| Jacket Volume | 30 L |
| Jacket Heat Transfer Area | 1.09 m² |
| Condenser Heat Transfer Area | 0.5 m² |
| Material | ASTM E438 Type I, Class A Borosilicate 3.3 Glass |
| Support Frame & Fittings | AISI 304 Stainless Steel |
| Operating Temperature Range | −80 °C to +200 °C |
| Pressure Rating | Ambient or Vacuum (Max. Vacuum: −0.098 MPa gauge / ≤ 2 kPa abs) |
| Agitator Motor | 370 W, Variable-Frequency Drive (VFD) |
| Stirring Speed | 50–500 rpm |
| Sealing System | PTFE-lined magnetic coupling with corrosion-resistant ceramic bearing |
| Discharge Valve | Side-mounted, zero-dead-volume PTFE-sealed valve |
| Power Supply | 220 V AC, 50/60 Hz |
| Overall Dimensions (L×W×H) | 1200 × 790 × 2480 mm |
| Temperature Sensor | Fluoropolymer-coated 304 SS probe |
| Stirrer Type | Propeller-type, shaft and blade fully clad in PTFE |
| Port Configuration | 7 standardized openings (including 60 mm agitator flange, dual 34# standard taper joints, 40# constant-pressure funnel port, 50# spherical joint for condenser, 95# solid-feed flange, DN15 circulation ports) |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-100 |
| Instrument Category | Glass Reactor / Solvent Recovery Unit |
| Working Volume | 100 L |
| Construction Material | Borosilicate Glass (3.3) + Stainless Steel Frame (304/316) |
| Operating Pressure | Low-pressure, Vacuum-Driven |
| Maximum Vacuum Level | 0.098 MPa (≈ 735 mmHg) |
| Explosion Protection Rating | Ex dⅡBT4 |
| Condenser Type | Horizontal Shell-and-Tube Glass Condenser |
| Secondary Condenser | Integrated |
| Collection Configuration | Dual Collection Vessels with Independent Valve Control |
| Connection Method | Flanged Glass Joints (ISO-KF or DIN 28, depending on configuration) |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Category | Domestic |
| Model | GR-2 |
| Reactor Type | Benchtop Glass Reactor |
| Vessel Capacity | 2 L |
| Vessel Material | Borosilicate Glass 3.3 |
| Operating Pressure Range | –0.1 MPa to 0 MPa (vacuum to ambient) |
| Temperature Range | –80 °C to +200 °C |
| Jacket Volume | 1.7 L |
| Jacket Pressure Rating | ≤ 0.03 MPa |
| Stirring Speed Range | 40–500 rpm |
| Speed Accuracy | ±1 rpm |
| Motor Type | Brushless DC |
| Motor Power | 50 W |
| Stirrer Shaft Material | 06Cr19Ni10 (AISI 304) with PTFE cladding |
| Impeller Material | PTFE-coated 06Cr19Ni10 |
| Sealing | Vacuum-rated mechanical seal |
| Stirrer Configuration | Single-layer four-blade inclined turbine |
| Temperature Sensor | PT100, ±0.1 °C accuracy |
| Display | Digital LED for speed and temperature |
| Power Supply | Stirrer: 100–240 V AC, 50/60 Hz |
| Control Box | 220–240 V AC, 50/60 Hz |
| Dimensions (W×D×H) | ~480 × 420 × 1100 mm |
| Weight | ~20 kg |
| Compliance | Designed for GLP-compliant laboratory environments |
| Accessories | Standard condenser (326 mm length, 0.025 m² cooling area), 200 mL constant-pressure dropping funnel (24/29 joint), 24/40 and 19/26 standard taper ports, φ20 discharge valve, Rc 3/4 & Rc 1/2 jacket inlet/outlet threads |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-2 |
| Price Range | USD 2,800–7,000 (FOB) |
| Usable Volume | 2 L |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Operating Pressure Range | −0.1 MPa to 0 MPa (gauge) |
| Maximum Vacuum Level | 0.098 MPa (absolute) |
| Temperature Range | −80 °C to +200 °C |
| Sealing Components | PTFE/FKM stopcocks and discharge valves |
| O-rings | FEP-coated FKM elastomers |
| Integrated Gauges | Analog vacuum gauge + digital temperature display |
| Available Volumes | 1 L, 2 L, 3 L, 5 L |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GR-20 |
| Capacity | 20 L |
| Vessel Material | 3.3 borosilicate glass |
| Operating Pressure Range | –0.1 MPa to atmospheric pressure |
| Temperature Range | –80 °C to +200 °C |
| Vacuum Performance | ≤ –0.095 MPa (absolute) |
| Sealing Components | PTFE stopcocks and discharge valve |
| Jacket Configuration | Dual-layer (inner heating/cooling jacket + outer vacuum-insulated jacket optional) |
| Application Class | Synthesis, distillation, concentration, reflux |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-20 |
| Capacity | 20 L |
| Vessel Material | GG17 Borosilicate Glass (3.3) |
| Operating Pressure | Low-pressure (up to 0.1 MPa gauge) |
| Vacuum Level | –0.098 MPa (absolute) |
| Jacket Configuration | Triple-layer (inner reaction vessel + dual insulating/temperature-control jackets) |
| Stirring Motor | AC Gearmotor with Frequency Control |
| Sealing System | PTFE-faced mechanical seal + ground-glass joints |
| Temperature Sensor | Pt100 RTD probe |
| Discharge Valve | PTFE-lined adjustable bottom valve |
| Frame | Stainless steel mobile column-type support structure |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-20Ex |
| Capacity | 20 L |
| Working Pressure Range | –0.1 MPa to 0 MPa (vacuum to atmospheric) |
| Jacket Pressure Rating | ≤ 0.03 MPa |
| Vacuum Level | 0.095 MPa (abs) |
| Operating Temperature Range | –80 °C to +200 °C |
| Vessel Material | ASTM E438 Type I, Class A borosilicate 3.3 glass |
| Stirring Speed Range | 50–500 rpm |
| Speed Accuracy | ±1 rpm |
| Motor Type | Ex db IIB T4 Gb certified explosion-proof three-phase asynchronous motor |
| Power | 180 W |
| Stirrer Shaft Material | 06Cr19Ni10 stainless steel with PTFE cladding |
| Impeller Material | PTFE-coated 06Cr19Ni10 |
| Sealing System | Vacuum-rated mechanical seal with PTFE bearing |
| Condenser Surface Area | 0.341 m² |
| Electrical Supply | 220–240 V~, 50/60 Hz |
| Ambient Operating Conditions | 5–35 °C, ≤70% RH |
| Dimensions (W×D×H) | ~825 × 720 × 1960 mm |
| Net Weight | ~80 kg |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-20L (Adjustable Height & Rotatable) |
| Price Range | USD 2,800 – 7,000 |
| Usable Volume | 20 L |
| Vessel Material | Borosilicate Glass 3.3 |
| Operating Pressure | Atmospheric or Vacuum (Max. Vacuum: 0.098 MPa) |
| Jacket Volume | 6 L |
| Jacket Heat Transfer Area | 0.32 m² |
| Condenser Heat Transfer Area | 0.3 m² |
| Temperature Range | −80 °C to +200 °C |
| Thermal Shock Resistance | ΔT ≤ 90 °C |
| Motor Power | 90 W |
| Speed Range | 50–500 rpm |
| Speed Control | Frequency Inverter |
| Stirring Seal | Dual Mechanical Seal (PTFE-coated Stainless Steel Shaft & Bearings) |
| Bottom Discharge Valve | PTFE-lined, Zero-Dead-Volume Design |
| Base Construction | Parallel Steel Frame with Locking Casters |
| Overall Dimensions (L×W×H) | 660 × 535 × 1950 mm |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-20L (Elevating & Rotatable) |
| Capacity | 20 L |
| Jacket Volume | 6 L |
| Jacket Heat Transfer Area | 0.32 m² |
| Condenser Heat Transfer Area | 0.3 m² |
| Material | Borosilicate Glass 3.3 |
| Operating Temperature Range | −80 °C to +200 °C |
| Thermal Shock Resistance | 90 °C |
| Operating Pressure | Vacuum or Atmospheric |
| Maximum Vacuum | 0.098 MPa (absolute) |
| Stirring Speed Range | 50–500 rpm |
| Motor Power | 90 W |
| Drive Type | Frequency-Controlled Variable-Speed Drive |
| Stirring Seal | Dual Mechanical Seal (PTFE-coated stainless steel shaft & bearing) |
| Bottom Discharge Valve | PTFE-lined DN15 flanged valve with ≥300 mm ground clearance |
| Dimensions (L×W×H) | 660 × 535 × 1950 mm |
| Power Supply | 220 V, 50 Hz |
| Port Configuration | Six standard openings (50 mm stirrer port, two 24/40 standard taper joints, one 50 mm ball joint, one 34 mm taper joint, one 40 mm taper joint, one 80 mm flange for solid feed) |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-20TEx |
| Usable Volume | 20 L |
| Vessel Material | Borosilicate Glass 3.3 |
| Operating Pressure Range | −0.1 to 0.0 MPa (gauge) |
| Jacket Volume | ~6.0 L |
| Condenser Heat Transfer Area | ~0.249 m² |
| Constant-Pressure Funnel Capacity | 2000 mL |
| Temperature Range | −80 °C to +200 °C |
| Max. ΔT Between Vessel Interior and Exterior | ≤80 °C |
| Jacket Pressure Limit | ≤0.03 MPa |
| Stirring Motor | 180 W, 3-phase asynchronous, frequency-controlled, 50–500 rpm |
| Stirrer Type | Paddle-type with PTFE blades |
| Shaft Material | SUS304 stainless steel sheathed in PTFE |
| Sealing | High-performance mechanical seal with low-wear bearing |
| Temperature Sensor | Pt100 (±0.1 °C display accuracy), PTFE-sheathed |
| Frame Material | SUS304 stainless steel |
| Explosion Protection | Ex d IIB T4 Gb per GB/T 3836.1–2021 & IEC 60079-0:2017 |
| Certified Components | All explosion-proof components carry valid third-party certification from CNEX or equivalent accredited body |
| Power Supply | 220–240 V~, 50 Hz |
| Ambient Operating Conditions | 5–35 °C, RH ≤70 % |
| Mobility | Equipped with locking casters |
| Bottom Discharge Valve Height | ~320 mm above floor level |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-2L |
| Capacity | 2 L |
| Material | Borosilicate Glass 3.3 |
| Operating Pressure Range | −0.1 to 0 MPa |
| Vacuum Level | ≤ −0.098 MPa (≤ 2 kPa absolute) |
| Temperature Range | −80 °C to +200 °C |
| Stirring Speed | 50–500 rpm |
| Stirring Power | 70 W |
| Torque | 70 N·cm |
| Temperature Sensor | Pt100 (±0.1 °C accuracy) |
| Condenser Area | ~0.025 m² |
| Constant-Pressure Funnel Volume | 200 mL |
| Jacket Volume | ~0.6 L |
| Sealing Material | PTFE + FKM O-rings with PTFE coating |
| Electrical Supply | 220–240 V~, 50/60 Hz or 110 V~, 60 Hz |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-30TEx |
| Usable Volume | 30 L |
| Vessel Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Working Pressure Range | −0.1 to 0.0 MPa (vacuum only) |
| Maximum Vacuum | 0.098 MPa |
| Jacket Volume | ~10 L |
| Condenser Heat Transfer Area | 0.341 m² |
| Temperature Range | −80 °C to +200 °C |
| Stirring Speed Range | 50–500 rpm |
| Motor Power | 180 W |
| Explosion Protection | Exd II BT4 (certified components) |
| Temperature Sensor | Pt100 (±0.1 °C accuracy) |
| Frame Material | SUS304 Stainless Steel |
| Dimensions (W×D×H) | 1200 × 750 × 2750 mm |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GR-3L |
| Instrument Classification | Jacketed Glass Reactor |
| Usable Volume | 3 L |
| Vessel Material | Borosilicate Glass 3.3 |
| Operating Pressure Range | –0.1 to 0.0 MPa (gauge) |
| Vacuum Level | ≤ –0.098 MPa (absolute) |
| Jacket Pressure Rating | ≤ +0.03 MPa |
| Temperature Range | –80 °C to +200 °C |
| Stirring Speed | 50–500 rpm |
| Stirring Power | 70 W |
| Torque | 70 N·cm |
| Temperature Sensor | Pt100 (±0.1 °C accuracy) |
| Condenser Surface Area | ~0.025 m² |
| Constant-Pressure Funnel Capacity | 200 mL |
| Frame Material | SUS304 Stainless Steel |
| Sealing Material | PTFE |
| Electrical Supply | 110 V / 60 Hz or 220–240 V / 50–60 Hz |
| Dimensions (W×D×H) | ~480 × 420 × 1200 mm |
| Weight | Approx. 45 kg |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GR-5 |
| Capacity | 5 L |
| Working Pressure Range | –0.1 MPa to atmospheric pressure |
| Vacuum Level | 0.095 MPa (absolute) |
| Jacket Volume | 3 L |
| Temperature Range | –80 °C to +200 °C |
| Glass Material | ASTM E438 Type I, Class A borosilicate 3.3 glass |
| Stirring Speed Range | 50–500 rpm |
| Stirring Motor Power | 90 W |
| Sealing Material | PTFE |
| Temperature Sensor | PT100 (±0.1 °C accuracy) |
| Stirring Seal Type | Vacuum-rated mechanical seal |
| Condenser Surface Area | ~0.045 m² |
| Electrical Supply | 220–240 V~, 50/60 Hz |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | GR-5~100 |
| Capacity | 5–100 L |
| Vessel Material | Borosilicate Glass 3.3 |
| Working Pressure Range | −0.1 MPa to 0 MPa (gauge) |
| Vacuum Level | 0.095 MPa (absolute) |
| Temperature Range | −80 °C to +200 °C |
| Jacket Configuration | Double-jacketed (vacuum-insulated outer jacket option available) |
| Drive Motor Options | Three-phase induction motor or brushless DC motor |
| Explosion Protection Rating | Ex db IIB T4 Gb |
| Stirring Shaft Material | 06Cr19Ni10 stainless steel with PTFE cladding |
| Impeller Material | PTFE |
| Sealing System | Proprietary mechanical seal assembly |
| Frame Material | 06Cr19Ni10 stainless steel + aluminum alloy with epoxy powder coating |
| Mobility | Casters with locking brakes |
| Drain Valve | Zero-holdup PTFE-lined discharge valve |
| Jacket Fluid Inlet/Outlet | Stainless steel insulated flexible hoses |
| Brand | Haage |
|---|---|
| Origin | Germany |
| Model | Lab-to-Industrial Series |
| Working Pressure | 50–1,000 bar |
| Temperature Range | Up to 700 °C |
| Volume Capacity | 0.25–20.0 L |
| Vessel Agitation | Rocking-type motion |
| Construction Material | Alloy 718 / Inconel 625 (standard) |
| Vacuum Capability | ≤10⁻³ mbar (base vacuum, prior to pressurization) |
| Compliance | PED 2014/68/EU, ASME BPVC Section VIII Div. 3 (upon request) |
| Brand | Haage |
|---|---|
| Origin | Germany |
| Type | Laboratory-to-Industrial Reactor |
| Volume Range | 0.15–100 L |
| Operating Pressure | 50–3000 bar |
| Maximum Temperature | 700 °C |
| Construction | Forged High-Heat-Resistant Steel (Standard) |
| Vacuum Capability | Yes (down to <1 mbar, compatible with high-pressure operation) |
| Standard Safety Components | Certified Rupture Disc Assembly (with spare), Dual Thermocouple Monitoring (bulk & wall), Pressure Gauge, Gas Inlet/Outlet Valve, Sample Port, Magnetic Stirring Interface (optional), ATEX-Compliant Configuration Available |
| Optional Materials | Hastelloy®, Inconel®, Monel®, Nickel, Tantalum, Non-Metallic Linings (e.g., PTFE, SiC, Al₂O₃) |
| Optional Features | Digital Pressure Display, Integrated Condenser (top/bottom), Immersion Sampling Tube, Temperature-Limited Safety Interlock, Inert Gas Purge Valve, Bottom Drain Valve |
| Brand | Haage |
|---|---|
| Origin | Germany |
| Type | Laboratory High-Pressure Reactor |
| Volume Range | 0.15 – 100 L |
| Operating Pressure | 50 – 1000 bar |
| Temperature Range | up to 700 °C |
| Construction Material | Stainless Steel (standard) |
| Vacuum Capability | Yes (compatible with vacuum operation per design specification) |
| Standard Configuration | Dual high-temp inlet/outlet valves, gas inlet/outlet valve, pressure gauge, sampling blind port, dual thermocouple ports (internal & wall-mounted), certified rupture disc with spare, central stirrer mounting port, auxiliary electrode ports |
| Optional Features | Magnetic drive stirrer (60–4000 N·cm torque), digital speed control & display, inert gas purge valve, integrated safety interlocks (temperature limiters), pressure transducer with digital readout, internal condenser, bottom drain valve, ATEX-certified configuration, massive non-metallic lining |
| Brand | Hanking |
|---|---|
| Origin | Shanghai, China |
| Model | CX Series |
| Capacity | 10–250 mL per reactor |
| Configuration Options | 6-, 7-, 12-, or 15-position modular blocks |
| Reactor Type | Modular parallel synthesis station with integrated thermal control, magnetic stirring, and optional inert gas/vacuum handling |
| Brand | Hanking |
|---|---|
| Origin | Shanghai, China |
| Model | MAPS-6400 |
| Maximum Vessel Capacity | 500 mL (standard reaction vessel) |
| Temperature Control Range | −40 °C to +180 °C |
| Cooling Rate | ≥25 °C/min (emergency mode) |
| Stirring Modes | Magnetic (50–1600 rpm) and Mechanical (100–1100 rpm), switchable via touchscreen |
| Temperature Program | Up to 10-segment per channel, non-linear ramping (max. 20 °C/min) |
| Safety | Dual-mode thermal feedback-triggered emergency cooling, flow-limiting valve auto-closure, Peltier-based rapid cooldown |
| Software | OTA-upgradable control platform, LAN and wireless industrial tablet interface (≥15 m range) |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | Hanking |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Model | MTS-6610 |
| Capacity | 1 mL to 1000 mL (interchangeable reactor vessels) |
| Temperature Range | −40 °C to 250 °C |
| Control Modes | 6 programmable heating profiles (2 rapid, 2 precise, 2 ramp-hold sequences) |
| Stirring | Dual-mode — high-energy magnetic stirring + modular mechanical stirring with penetrable shaft design |
| Optional Module | External cryogenic coolant circulation unit (compatible with −40 °C isothermal control and automated ramp/soak protocols) |
| Brand | Hanking |
|---|---|
| Model | PX Series |
| Type | Parallel Synthesis Reactor |
| Temperature Range | -40 °C to 250 °C |
| Reaction Volumes | 0.5 mL – 1000 mL (1000 mL on custom request) |
| Independent Channels | 4 or 5 |
| Control Modes | 6 programmable temperature profiles (isothermal, constant-temperature, and ramp/hold with dual variants) |
| Temperature Programming | Up to 10 gradient segments per channel |
| Stirring | Dual-mode (high-energy magnetic stirring + optional through-shaft mechanical stirring) |
| Safety Features | Dual over-temperature cutoff, real-time exotherm-triggered emergency cryo-cooling, current overload protection, post-run high-temp alert, self-diagnostic alarm system |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | CREAFLOW |
|---|---|
| Origin | Belgium |
| Model | HX-15 |
| Reactor Volume | 15 mL |
| Operating Pressure | 0–10 bar |
| Temperature Range | –20 to +80 °C |
| Window Material | Borosilicate glass (transmission >325 nm) or Quartz (transmission >200 nm) |
| Wetted Materials | 316L stainless steel, Hastelloy C-276 (customizable) |
| Heat Exchange | External thermal fluid circuit |
| Flow Channel Dimensions | 2 mm × 2 mm |
| Mixing Mechanism | Static baffled elements + synchronized pulsation |
| Residence Time Distribution | Narrow (Péclet number >100) |
| PAT Integration | In-line UV-Vis spectroscopy compatible |
| Cleanability | Fully disassemblable for cGMP-compliant cleaning |
| Brand | CREAFLOW |
|---|---|
| Origin | Belgium |
| Model | HX-150 |
| Reactor Volume | 150 mL |
| Operating Pressure | 0–10 bar |
| Temperature Range | −20 to 80 °C |
| Window Material | Borosilicate glass (transmission >325 nm) / Quartz (transmission >200 nm) |
| Construction Materials | 316L stainless steel, Hastelloy C-276 (customizable) |
| Heat Exchange | External thermal fluid circuit |
| Flow Regime | Laminar-to-turbulent transition via static mixing and pulsed flow |
| Residence Time Distribution | Narrow (Péclet number >100) |
| Optical Path Geometry | Integrated transparent irradiation windows with uniform photon flux delivery |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HN-20L |
| Price Range | USD 2,800 – 7,000 |
| Usable Volume | 20 L (Medium-Scale) |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Operating Pressure Range | Up to 0.1 MPa (gauge) / Vacuum Down to −0.098 MPa (absolute) |
| Thermal Jacket Interface | Dual-port DN25 FKM-sealed ports |
| Stirring System | AC Gear Motor with Torque Output 300 N·cm |
| Speed Control | 50–600 rpm, Stepless Electronic Regulation |
| Temperature Sensor | Pt100 Class A (IEC 60751), ±0.15 °C accuracy |
| Sealing | Alloy Steel Mechanical Seal with PTFE Bellows & Rotating Face |
| Frame | Stainless Steel 304 Mobile Column Structure |
| Lid Configuration | Five-Neck Standard Ground-Glass Joint (NS29/32, NS24/29) |
| Bottom Discharge | DN25 Flanged Outlet with PTFE Plug Valve |
| Optional | Explosion-Proof Motor (ATEX II 2G Ex d IIB T4 Gb / IECEx Certified) |
| Compliance | Designed per GB/T 25913–2010 (Laboratory Glass Reactors), Compatible with GLP/GMP Lab Infrastructure |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HN-5L |
| Price | USD 2,780 (FOB Shanghai) |
| Usable Volume | 5 L |
| Vessel Material | High-Borosilicate Glass (3.3) |
| Operating Pressure Range | Atmospheric to -0.098 MPa (gauge) |
| Jacket Inlet/Outlet | Standard 1/2" NPT |
| Temperature Range (Jacket) | -80 °C to +200 °C (with compatible heat transfer fluid) |
| Stirring Motor | AC Gear Motor, 180 W, 50–600 rpm, 300 N·cm max torque |
| Temperature Sensor | Pt100 RTD, ±0.3 °C accuracy |
| Sealing | Mechanical Seal with PTFE Stator/Rotor, DIN/ISO-compliant face seal design |
| Frame | Stainless Steel (304), Mobile Column-Type Support with Locking Casters |
| Lid Configuration | 5-Port Standard Ground-Glass Joint (NS29/32 & NS24/29) |
| Bottom Discharge | PTFE Plug Valve with ISO-KF Flange Interface |
| Vacuum Compatibility | Validated for continuous operation at ≤ –0.098 MPa (≤ 2 mbar abs) |
| Optional | ATEX-certified Explosion-Proof Motor (IECEx / CNEx certified) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model Range | HN-1L, HN-2L, HN-3L, HN-5L |
| Vessel Capacity | 1–5 L |
| Construction Material | GG17 borosilicate glass (ISO 3585 compliant) |
| Jacket Configuration | Double-wall vacuum-insulated |
| Operating Pressure | Ambient to –0.1 MPa (vacuum capable) |
| Stirring Motor | AC induction, brushless, variable-frequency drive |
| Speed Range | 50–800 rpm |
| Motor Power | 40 W (HN-1L), 90 W (HN-2L to HN-5L) |
| Max Torque | 2400 g·cm (HN-1L), 5000 g·cm (HN-2L–HN-5L) |
| Inner/Outer Diameter | 150×180 mm (1L/2L), 200×230 mm (3L/5L) |
| Lid Port Configuration | Central 50# standard taper, left 29#, right 24#, front 14# or 19#, rear optional (24# on HN-3L/HN-5L) |
| Bottom Discharge | PTFE-coated stainless steel valve with ISO-KF or DIN 2817 flange interface |
| Cooling/Heating Interface | Dual 1/2" NPT jacket inlets with thermal fluid compatibility up to 200 °C (heat transfer oil) and down to –80 °C (ethanol/dry ice or chiller) |
| Brand | Hanuo |
|---|---|
| Capacity | 10–50 L |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Operating Pressure | Low-pressure, Vacuum-Compatible |
| Maximum Vacuum | −0.096 MPa (≈ 96 kPa absolute) |
| Stirring Speed Range | 50–600 rpm |
| Motor Type | Brushless AC Induction Motor |
| Power Input | 120–180 W (model-dependent) |
| Torque Output | 162–300 N·cm |
| Voltage | 220 V AC, 50 Hz |
| Jacket Inlet/Outlet | Standard G1/2″ or G3/4″ BSP |
| Lid Diameter | 265 mm |
| Port Configuration | 5 standard NS29/32 ground-glass joints |
| Bottom Discharge | PTFE-lined stainless steel valve with ISO-KF or DN25 flange interface |
| Cooling/Heating Medium Compatibility | Water, glycol/water mixtures, silicone oil, thermal oils (−80 °C to +200 °C) |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HN1L-5L |
| Price | USD 890 (FOB Shanghai) |
| Usable Volume | 1–5 L (Small-scale) |
| Construction Material | Borosilicate Glass 3.3 (DIN ISO 3585) |
| Operating Pressure | Low-pressure, up to 0.1 MPa (gauge) |
| Vacuum Capability | ≤ –0.098 MPa (i.e., ≤ 20 mbar abs) |
| Jacket Inlet/Outlet | Standard 1/2″ FTF ports |
| Stirring Motor | AC gearmotor (40–90 W, adjustable 50–800 rpm) |
| Max Torque | 2400–5000 g·cm |
| Temperature Sensor | Pt100 (IEC 60751 Class B, ±0.3 °C accuracy) |
| Sealing System | Dual-face mechanical seal with PTFE bellows and alloy steel housing |
| Frame | Mobile stainless steel (AISI 304) column stand with leveling feet |
| Lid Configuration | Five-neck standard ground-glass joints (NS 50/NS 29/NS 24/NS 24/NS 19 for HN-5L |
| Bottom Discharge | PTFE plug valve with flanged connection |
| Optional | ATEX-certified explosion-proof motor (IECEx/ATEX Zone 1) |
| Brand | Hanuo |
|---|---|
| Origin | Zhejiang, China |
| Model | HNGYF-150D |
| Working Volume | 150 mL |
| Vessel Material | Stainless Steel (316L typical) |
| Operating Pressure Range | 0.1–12.5 MPa |
| Temperature Range | −10 °C to +100 °C |
| Ultrasonic Power Output | 10–500 W (continuously adjustable) |
| Vacuum Capability | 0.1–12.5 kPa (absolute) |
| Configuration | Jacketed dual-layer vessel with integrated ultrasonic transducer and titanium alloy sonotrode |