Synthesis/Reaction Equipment
Filter
Showing 31–60 of 242 results
| Brand | Syrris |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Atlas SonoLab |
| Pricing | Available Upon Request |
| Brand | Syrris |
|---|---|
| Origin | United Kingdom |
| Model | Atlas |
| Calorimetry Modes | Heat Flow Calorimetry (HFC) & Power Compensation Calorimetry (PCC) |
| Reactor Type | Triple-walled vacuum-jacketed vessel |
| Volume Range | 250 mL – 2 L |
| Temperature Range | −40 °C to +200 °C |
| Temperature Accuracy | ±0.1 °C (dependent on external circulator performance) |
| Max. PCC Power Compensation | 50 W |
| Max. HFC Energy Density | 100 W/L |
| Calorimetric Accuracy | 1–5% (subject to experimental conditions and integration time) |
| Sensitivity | <0.1 W/kg |
| Mechanical Stirring | 0–800 rpm |
| Magnetic Stirring | 0–1200 rpm |
| Gas Handling | Inert gas purging, vacuum & pressure operation capable |
| Optional Modules | Gravimetric & volumetric dosing systems (balances, syringe pumps, peristaltic pumps), in-line FTIR, turbidity/ particle size analyzers for crystallization studies, pH probes with automated pH control |
| Brand | AULTT |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Zhongjiao Jinyuan |
| Model | AULTT-TSP50 (Standard Integrated Temperature-Controlled) |
| Vessel Capacity | 50 mL |
| Usable Reaction Volume | 20–30 mL |
| Construction Material | Borosilicate Glass (3.3) |
| Operating Pressure | Low-pressure (atmospheric to slight positive/negative bias) |
| Sealing Interface | Standard 28/30 Ground-Glass Joint with Viton O-ring |
| Cooling/Heating Port | Dual-layer water-jacket with 10 mm BSP inlet/outlet ports |
| Vacuum Capability | Not rated for vacuum operation |
| Compliance | Designed for laboratory-scale photocatalytic screening under ambient pressure |
| Brand | Avantium |
|---|---|
| Origin | Netherlands |
| Model | Flowrence® |
| Maximum Operating Pressure | 200 bar |
| Maximum Operating Temperature | 850 °C |
| Catalyst Bed Volume | 25–1000 µL |
| Number of Parallel Reactors | 16 (4 modules × 4 reactors) |
| Reactor Inner Diameter | 2.0–2.6 mm |
| Isothermal Zone Length | 5–15 cm (standard), up to 50 cm (custom) |
| Feed Configuration | Up to 5 gases + 2 liquids |
| Catalyst Form | Extrudates (intact or crushed) |
| Downstream Phase Separation | Capillary-free gas–liquid separation |
| Automated Liquid Sampling | Integrated |
| Temperature Control | Independent per module (4 zones) |
| Brand | AWL |
|---|---|
| Origin | United Kingdom |
| Model | CFC15 |
| Temperature Range | Ambient to 80 °C (standard configuration) |
| Temperature Control Accuracy | < 0.5 °C |
| Filtration Throughput Options | 2.5 L/h, 6.5 L/h, 25 L/h |
| Filter Media Pore Size | 2–40 µm |
| Filter Disc Material | 316L Stainless Steel or Hastelloy® |
| Operating Vacuum | < 40 mbar (absolute) |
| Compressed Air Requirement | 4–6 bar, 1.0 L/min |
| Wetted Materials | Fully customizable per application |
| Compliance | ISO 9001 certified design and manufacturing |
| Regulatory Alignment | Supports GLP/GMP workflows with audit-ready operation logs |
| Brand | Altamira Instruments (USA) |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Jingwei Gaobo Instrument Co., Ltd. |
| Reactor Type | Fixed-Bed Microreactor |
| Configuration | 8 Parallel Stations |
| Pressure Rating | High-Pressure (up to 100 bar typical for catalytic evaluation) |
| Volume Class | Small-Scale (individual reactor volume: 0.1–5 mL) |
| Application Focus | Catalytic Activity Screening, Kinetic Studies, Stability Testing, and Process Development |
| Brand | Altamira Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BenchCAT Custom Microreactor |
| Instrument Category | Catalytic Reaction System |
| Reactor Volume | Small-scale (typically 0.1–10 mL) |
| Operating Pressure | Up to 100 bar (customizable to 200 bar) |
| Design Standard | ASME BPVC Section VIII Div. 1 compliant |
| Materials | 316L stainless steel, Hastelloy C-276, or quartz-lined options available |
| Temperature Range | Ambient to 500 °C |
| Flow Configuration | Continuous-flow, plug-flow, or recirculating modes |
| Gas/Liquid Handling | Dual-phase (gas–liquid–solid) catalytic operation supported |
| Brand | Biotage |
|---|---|
| Origin | Sweden |
| Model | Initiator+ Alstra |
| Temperature Range | 0–100 °C |
| Temperature Accuracy | ±1 °C |
| Reaction Vessel Count | 1 |
| Reaction Volume | 30 mL |
| Synthesis Scale | 5 μmol – 2 mmol |
| Control Interface | 10-inch Touchscreen |
| Reagent Delivery | Digital Metering Pumps |
| Mixing Method | Orbital Shaking |
| Vessel Type | Disposable Cartridges |
| Atmosphere Control | Inert Gas (N₂/Ar) Compatible |
| UV Monitoring | Integrated |
| Supported Chemistries | Fmoc & Boc Solid-Phase Peptide Synthesis (SPPS) |
| Brand | Brilliance |
|---|---|
| Model | Bri-CF- |
| Reactor Type | Continuous Flow Tubular Microreactor |
| Construction Material | 316L Stainless Steel / Hastelloy C-276 (optional) |
| Pump Configuration | Dual Plunger Pumps (100 mL/min each, external) |
| Max Flow Rate | ≤200 mL/min |
| Inlet/Outlet Port | 1/8″ NPT |
| Max Operating Pressure | ≤10 MPa |
| Hold-up Volume | 10–60 mL (standard: 30 mL |
| Mixing Zone Volume | 0.12 mL |
| Temperature Range | –20 °C to +200 °C (integrated high-low temperature circulator) |
| Reactor Configurations | 8 interchangeable coil-based reactor modules |
| Compatible Online Analyzers | UV-Vis and Mid-IR flow cells |
| Footprint | 650 × 450 × 600 mm (L×W×H) |
| Exclusion | Suspensions containing particles >50 µm |
| Brand | Brilliance |
|---|---|
| Model | Bri-CF-D |
| Type | Dynamic Tubular Reactor |
| Construction Material | 316L Stainless Steel / Hastelloy C-276 / Titanium Alloy / Nickel Alloy |
| Sealing | Mechanical Seal or Magnetic Coupling |
| Hold-up Volume | 100–2000 mL |
| Max Operating Pressure | ≤ 4 MPa |
| Temp. Range | −20 to 240 °C |
| Heat Exchange | External Jacket (external chiller/heater not included) |
| Agitation | Internally Mounted Stirring Shaft |
| Motor Power | 0.75–2.2 kW |
| Max Solid Content | 10–20 wt% |
| Max Particle Size | 0.2–0.5 mm |
| Temperature Sensors | 3–5 pts |
| Pressure Sensors | 1 pt |
| Control System | PLC with Touchscreen HMI |
| Compliance | Designed for GLP-compliant continuous reaction workflows |
| Application Scope | Gas–Liquid–Solid (G-L-S) multiphase reactions, high-viscosity systems, high-solid-loading suspensions, and kinetically demanding homogeneous/heterogeneous syntheses |
| Brand | Brilliance |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Bri-CF-PD |
| Instrument Category | Microchannel Reactor |
| Construction Material | Borosilicate Glass or Fused Quartz |
| Maximum Operating Pressure | 2.4 MPa |
| Minimum Channel Width | 10 µm |
| Maximum Hold-up Volume | 500 mL (borosilicate), 100 mL (quartz) |
| Operating Temperature Range | −70 °C to 220 °C |
| Heat Exchange Configuration | Integrated single- or double-layer heat exchange structure (bonded-free, monolithic) |
| Channel Architecture | 3D立体 microfluidic network (monolithically fabricated via femtosecond laser internal engraving) |
| Compliance | Designed for GLP-compliant synthesis workflows and scalable process intensification |
| Brand | Brilliance |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | Bri-CMF |
| Price Range | USD 15,500 – 63,000 (FOB) |
| Max Operating Pressure | ≤10 MPa |
| Max Operating Temperature | 220 °C |
| Catalyst Bed Volume per Channel | 5 mL |
| Reactor Material | 316L SS / Hastelloy C-276 |
| Channel Configurations | 1, 2, 4, or 8 independent reaction zones |
| Liquid Feed Rate | 0.01–8 mL/min |
| Liquid Flow Accuracy | ±1% FS |
| H₂ Feed Range | 5–100 sccm |
| N₂ Feed Range | 5–100 sccm |
| Preheater Temp Range | RT–220 °C |
| Dimensions (4-channel) | 570 × 695 × 720 mm |
| Brand | Brilliance |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Bri-PC-F-D |
| Instrument Category | Photochemical Reactor |
| Vessel Material Options | Stainless Steel / Borosilicate Glass / Enamel-Lined Steel |
| Spectral Range | 250–975 nm |
| Light Source | High-Power Tunable LED Array (1–300 kW equivalent photon flux) |
| Working Volume | 1–3000 L |
| Temperature Control | Integrated Electric Heating Furnace with PID Precision Regulation (±0.5 °C) |
| Pressure Rating | Up to 10 MPa (customizable) |
| Optical Window | Sapphire or Fused Silica (AR-coated, UV–NIR transparent) |
| Compliance | Designed per ISO 14001 and ASME BPVC Section VIII Div. 1 for pressure vessel safety |
| Brand | Brilliance |
|---|---|
| Model | Bri-PC-T |
| Type | Continuous-flow Photochemical Tubular Reactor |
| Construction Material | FEP (Fluorinated Ethylene Propylene) Coiled Tube |
| Light Source Range | 254–950 nm (standard 365–950 nm |
| Maximum Irradiance | ≤700 mW/cm² |
| Optical Stability | <5% intensity decay per year |
| Active Reaction Volume | 60 mL (equivalent to 20 m of 1/8″ OD FEP tubing |
| Flow Control | Optional dual syringe pumps (100 mL/min each, not included by default) |
| Temperature Control | Ambient only |
| Cooling | Integrated fan + optional jacketed cooling |
| Heating | Not integrated |
| Power Input | 100–240 VAC, 50/60 Hz |
| Control Interface | PLC-based touchscreen HMI with real-time component status visualization and actuation |
| Data Handling | Automated logging, timestamped storage, exportable CSV reports |
| Compliance Support | Designed for GLP-aligned operation |
| Brand | Brilliance |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Bri-PC-T-D |
| Instrument Type | Tubular Reactor |
| Reactor Configuration | Coiled-tube (FEP material) |
| Fluidic Interface | 2-inlet / 1-outlet |
| Hold-up Volume | 200 mL to 10 L (customizable via tube ID/length) |
| Pump Type | Precision Plunger Pump (configurable) |
| Wavelength Range | 254–950 nm (custom wavelengths available) |
| Light Source Power | 100–1000 W (customizable) |
| Irradiance Control | Continuously Adjustable |
| Cooling Method | Integrated Water-Cooled Light Housing |
| Temperature Control | Integrated Dual-Range Thermostatic System (−20 °C to +120 °C typical) |
| Electrical Supply | 100–240 VAC, 50/60 Hz |
| Optional Configurations | Multi-pump manifolds, Multi-wavelength lamp modules, Real-time UV-Vis inline monitoring ports |
| Brand | CEAULIGHT |
|---|---|
| Model | CEL-GPPCM |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Reaction Pressure Range | ±0.01 MPa |
| Maximum Operating Temperature | ≤800 °C |
| Catalyst Loading Capacity | 0.1 mg–100 mg |
| Gas Inlet Channels | 3 (expandable to 4) |
| Liquid Injection Port | 1 dedicated interface |
| Flow Control Accuracy | ±1% FS |
| Pressure Display Resolution | ±0.01 MPa |
| Temperature Control Accuracy | ±1 °C |
| Temperature Display Resolution | ±0.1 °C |
| Reactor Material | Fused Quartz |
| Reactor Dimensions | Compatible with standard quartz tube configurations (ID/OD specified per configuration) |
| System Footprint | 400 mm (W) × 700 mm (H) × 700 mm (D) |
| Safety Features | Dual-stage temperature & pressure alarm with automatic interlock shutdown |
| Data Logging | Real-time acquisition, timestamped storage, CSV export capability |
| Compliance Framework | Designed for GLP-aligned operation |
| Brand | CEA-Light (CEL) |
|---|---|
| Model | HT5 |
| Type | Dual-Compartment Photoelectrochemical Reactor |
| Capacity | 100 mL (total, 50 mL per chamber) |
| Operating Pressure | Low-pressure / Ambient Pressure |
| Vacuum Capability | Atmospheric (no active vacuum system) |
| Window Material | Standard Quartz (25 mm diameter, ≥185 nm UV transmission) |
| Optional Windows | CaF₂ (down to 125 nm), KBr (IR-transmissive) |
| Electrode Compatibility | External electrodes with 6 mm outer diameter |
| Membrane Integration | Compatible with ion-exchange membranes (e.g., Nafion™) |
| Connection | DIN 25/35 ISO-K flange interface |
| Construction Material | Borosilicate glass body with PTFE-sealed stainless steel flanges |
| Application Domain | In situ photoelectrochemical (PEC) characterization, dual-compartment redox coupling, controlled potential electrolysis under illumination |
| Brand | CEM |
|---|---|
| Origin | USA |
| Instrument Type | Single-Mode Microwave Reactor |
| Temperature Range | –80 °C to 300 °C |
| Pressure Range | 0–35 bar |
| Microwave Power Output | 0–600 W |
| Magnetron Frequency | 2450 MHz |
| Stirring Modes | Electromagnetic + Mechanical Stirring |
| Reaction Vessel Capacity | 300 mL |
| Brand | CEM |
|---|---|
| Origin | USA |
| Model | DISCOVER 2.0 |
| Temperature Range | Up to 200 °C |
| Pressure Range | Up to 200 psi (13.8 bar) |
| Microwave Power | 900 W |
| Magnetron Frequency | 2450 MHz |
| Stirring Method | Electromagnetic Stirring |
| Reaction Vessel Capacity | 10 mL |
| Gas Compatibility | H₂, O₂, CO₂, CO, N₂, Ar (non-corrosive only) |
| Temperature Monitoring | Fiber-Optic Probe |
| Pressure Monitoring & Control | Real-time digital pressure sensor with vacuum purge and vent capability |
| Gas Dosing | Programmable mass-flow-controlled gas introduction |
| System Integration | Fully compatible with CEM DISCOVER modular platform |
| Brand | CEM |
|---|---|
| Origin | USA |
| Model | Discover 2.0 (Single-Mode) |
| Temperature Range | 0–300 °C |
| Pressure Range | 0–35 bar (500 psi) |
| Microwave Power Output | 0–900 W |
| Magnetron Frequency | 2450 MHz |
| Stirring Modes | Electromagnetic + Optional Mechanical Stirring |
| Reaction Volume Capacity | 300 mL |
| Cavity Type | Ring-Focused Single-Mode |
| Cooling Technology | PowerMAX Synchronized Active Cooling |
| Control Interface | 10.1" Touchscreen with TimeWave Embedded OS |
| Camera Integration | 5 MP Real-Time Imaging Module |
| Compliance | ISO 9001, CE, ETL, FDA 21 CFR Part 11 Ready (via Synergy PC Software) |
| Brand | CEM |
|---|---|
| Origin | USA |
| Model | Explorer (Single-Mode) |
| Temperature Range | 0–350 °C |
| Pressure Range | 0–500 psi |
| Microwave Power | 900 W |
| Magnetron Frequency | 2450 MHz |
| Stirring Method | Electromagnetic |
| Reaction Vessel Volume | 300 mL |
| Cavity Type | Circular Single-Mode |
| Real-Time Pressure Monitoring | 0–35 bar |
| Low-Temperature Capability | Down to –80 °C |
| Automation | XYZ Robotic Arm with 12/24/48-Position Auto-Sampler |
| Brand | CEM |
|---|---|
| Origin | USA |
| Model | Voyager (Single-Mode) |
| Temperature Range | −80 °C to 300 °C |
| Pressure Range | 0–500 psi with intelligent pressure-triggered microwave cutoff |
| Microwave Power | 900 W |
| Reaction Volume | 300 mL |
| Flow Cell Capacity | 80 mL glass vessel |
| Pump Type | Peristaltic pump |
| Temperature Sensing | Fiber-optic or IR-based real-time monitoring |
| Pressure Sensing | Direct inline transducer |
| Valve Configuration | Dual valves (4-position and 6-position options) |
| Reagent Sensors | Two integrated reagent presence detectors |
| Operating Limits | Up to 220 °C or 200 psi continuous operation |
| Compliance | Designed for GLP/GMP-aligned process development environments |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | CFRD-L2G2-500 |
| Max Operating Pressure | 10 MPa(a) |
| Max Operating Temperature | 500 °C |
| Catalyst Bed Volume per Channel | 1–5 mL |
| Heating Zone Length | 240 mm |
| ±2 °C Isothermal Zone Length | 50 mm |
| Footprint | 0.6 m² |
| Remote Control | Yes (Web-based HMI via Ethernet/WiFi) |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | CFRF-L1G3-600 |
| Design Temperature | 600 °C |
| Design Pressure | 6 MPa (60 bar) |
| Catalyst Bed Volume | 1–5 mL |
| Heating Zone Configuration | Triple-Zone Furnace (80 mm isothermal length per zone) |
| Reactor Tube Material | Hastelloy C-276 |
| Gas Inlets | 3 independent mass-flow-controlled channels |
| Liquid Inlet | 1 precision syringe pump or HPLC-grade liquid delivery channel |
| Safety Systems | Integrated pressure relief valve, dual-stage overtemperature/overpressure alarms, combustible gas detector with audible/visual alert |
| Power Supply | 220 V, 50 Hz |
| Dimensions (W×D×H) | 1000 mm × 500 mm × 1830 mm |
| Data Interface | Local HMI touchscreen + Ethernet-enabled remote PC control (Modbus TCP / OPC UA compatible) |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CFRF-L1G3-600-100 |
| Reaction Pressure | 10 MPa |
| Maximum Reaction Temperature | 800 °C |
| Catalyst Loading Capacity | 0.5–5 mL |
| Heating Configuration | Triple-Zone Electric Furnace (for floor-standing unit) / Oil-Jacketed Bath (for benchtop unit, max 300 °C) |
| Display | 10.1" TFT Touchscreen HMI |
| Remote Control | Yes, via PC-based SCADA software |
| Safety Features | Dual-stage over-temperature/over-pressure interlock, combustible gas monitoring, automatic shutdown |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | HTG / HTS |
| Volume Options | 10, 25, 50, 100, 150, 200, 300, 500, 1000 mL |
| Max Operating Temperature | 220 °C (domestic PTFE) / 260 °C (imported PTFE) |
| Max Working Pressure | 3 MPa |
| Vacuum Rating | 30 bar |
| Heating Compatibility | Oven, Oil Bath, Electric Heater |
| Liner Material | High-Purity Polytetrafluoroethylene (PTFE) |
| Vessel Body Material | Stainless Steel (AISI 304 or 316 optional) |
| Pressure Class | Low-Pressure Reactor (ASME B16.5 compliant for flanged variants) |
| Brand | Chemn |
|---|---|
| Model | KMCFRF-G3-900 |
| Origin | Anhui, China |
| Reactor Type | Benchtop Fixed-Bed Catalytic Reactor |
| Maximum Operating Pressure | 10 MPa |
| Maximum Operating Temperature | 1000 °C |
| Catalyst Bed Volume | 0.5–5 mL |
| Heating Configuration | Triple-Zone Electric Furnace |
| Safety Features | Dual-Stage Pressure/Temperature Alarm & Interlock Protection |
| Remote Control | PC-based Software Interface with Real-Time Monitoring & Actuation |
| Gas Boosting Capability | Integrated Air-Driven Gas Booster (Up to 19 MPa) with 4–10 L Storage Tank |
| Construction | Powder-Coated Steel Frame |
| Reaction Tube Material | Hastelloy C-276 Outer Tube + Internally Nested Constricted Quartz Liner |
| Flow Control | High-Pressure Mass Flow Controllers (MFCs) with Back-Pressure Regulation |
| Modular Design | Customizable Reactor Tube Length & Inner Diameter |
| Compliance | Designed for GLP-compliant catalyst screening under ISO 17025-aligned laboratory practices |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KMCFRF-L2G3-300 |
| Pressure Rating | 10 MPa |
| Maximum Reaction Temperature | 300 °C |
| Catalyst Bed Volume | 1–5 mL |
| Heating Configuration | Triple-Zone Electric Furnace (for main reactor) / Oil-Jacketed Bath (for desktop variant) |
| Control Interface | 10.1″ TFT Touchscreen + PC-Based Remote Software |
| Safety Compliance | Dual-Stage Over-Temperature/Over-Pressure Interlock, Real-Time H₂ & Combustible Gas Monitoring |
| Modularity | Fully Modular Reactor Tube, Customizable Length & ID |
| Online Sampling | Integrated Liquid Phase Online Sampling Valve System |
| Remote Operation | Yes, via Ethernet-connected SCADA-grade control software |
| Brand | CHEMn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | KMPMS-10L-310-A |
| Price Range | USD 1,150 – 2,150 |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KMRA-8-NS100-C276-3G |
| Reactor Volume | 100 mL |
| Maximum Operating Pressure | 10 MPa |
| Design Temperature | 260 °C |
| Vessel Material | Hastelloy C-276 |
| Stirring | Magnetic Stirring or Magnetically Coupled Mechanical Stirring |
| Heating Method | Electric Heating or Integrated Jacket (High-Low Temperature) |
| Vacuum Level | ≤10 MPa (gauge, system-rated) |
| Gas Channels | 3 Process Gases + 1 Vacuum Line (expandable to 8) |
| Parallel Stations | 8 (configurable 1–12) |
| Overall Dimensions (8-station) | 2200 × 1850 × 2180 mm (L×W×H) |
| Weight (8-station) | ~1200 kg |
| Compliance | Designed per ASME BPVC Section VIII Div. 1 & ISO 4777 for high-pressure reactor systems |
| Software Control | Integrated PLC + HMI with audit trail and user-level access control |