Catalyst Evaluation Equipment
Filter
Showing 1–30 of 50 results
| Brand | Ahkemi |
|---|---|
| Origin | Anhui, China |
| Model | CFRF-FT-L0G3 |
| Maximum Operating Pressure | 10 MPa |
| Maximum Operating Temperature | 600 °C |
| Catalyst Bed Volume | 0.5–5 mL |
| Heating Zone Length | 240 mm |
| ±2 °C Isothermal Zone Length | 50 mm |
| Brand | Altamira Instruments (USA) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BenchCAT Custom Catalyst Evaluation System |
| Reaction Pressure | 300 bar |
| Reaction Temperature | 1200 °C |
| Catalyst Loading Capacity | mL- to L-scale configurable |
| Brand | Avantium |
|---|---|
| Origin | Netherlands |
| Model | Flowrence® |
| Maximum Operating Pressure | 200 bar |
| Maximum Operating Temperature | 850 °C |
| Catalyst Bed Volume | 25–1000 µL |
| Number of Parallel Reactors | 16 (4 modules × 4 reactors) |
| Reactor Inner Diameter | 2.0–2.6 mm |
| Isothermal Zone Length | 5–15 cm (standard), up to 50 cm (custom) |
| Feed Configuration | Up to 5 gases + 2 liquids |
| Catalyst Form | Extrudates (intact or crushed) |
| Downstream Phase Separation | Capillary-free gas–liquid separation |
| Automated Liquid Sampling | Integrated |
| Temperature Control | Independent per module (4 zones) |
| Brand | Brilliance |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | Bri-CMF |
| Price Range | USD 15,500 – 63,000 (FOB) |
| Max Operating Pressure | ≤10 MPa |
| Max Operating Temperature | 220 °C |
| Catalyst Bed Volume per Channel | 5 mL |
| Reactor Material | 316L SS / Hastelloy C-276 |
| Channel Configurations | 1, 2, 4, or 8 independent reaction zones |
| Liquid Feed Rate | 0.01–8 mL/min |
| Liquid Flow Accuracy | ±1% FS |
| H₂ Feed Range | 5–100 sccm |
| N₂ Feed Range | 5–100 sccm |
| Preheater Temp Range | RT–220 °C |
| Dimensions (4-channel) | 570 × 695 × 720 mm |
| Brand | CEAULIGHT |
|---|---|
| Model | CEL-GPPCM |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Reaction Pressure Range | ±0.01 MPa |
| Maximum Operating Temperature | ≤800 °C |
| Catalyst Loading Capacity | 0.1 mg–100 mg |
| Gas Inlet Channels | 3 (expandable to 4) |
| Liquid Injection Port | 1 dedicated interface |
| Flow Control Accuracy | ±1% FS |
| Pressure Display Resolution | ±0.01 MPa |
| Temperature Control Accuracy | ±1 °C |
| Temperature Display Resolution | ±0.1 °C |
| Reactor Material | Fused Quartz |
| Reactor Dimensions | Compatible with standard quartz tube configurations (ID/OD specified per configuration) |
| System Footprint | 400 mm (W) × 700 mm (H) × 700 mm (D) |
| Safety Features | Dual-stage temperature & pressure alarm with automatic interlock shutdown |
| Data Logging | Real-time acquisition, timestamped storage, CSV export capability |
| Compliance Framework | Designed for GLP-aligned operation |
| Brand | CEL |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Model | CEL-OPTH-I |
| Price Range | USD 1,400 – 7,200 |
| Operating Pressure | Ambient (0 MPa gauge) |
| Max. Reaction Temperature | 1000 °C (programmable, 1 °C resolution) |
| Catalyst Loading Capacity | Up to 2 g (standard quartz sample boat) |
| Heating Power | 1.2 kW (220 V, 50 Hz) |
| Heating/Cooling Rate | 30 °C/min (heat), 60 °C/min (cool) |
| Standard Light Source | CEL-PF300-T8 Xenon Lamp System with Optical Filters |
| Reactor Material | High-Purity Fused Silica (UV-Vis-NIR Transparent, ≤1000 °C) |
| Cooling Method | Forced-Air Insulation Jacket |
| Temperature Control Accuracy | ±1 °C |
| Atmosphere Control | Vacuum-compatible (<10⁻³ mbar), inert gas purging (N₂, Ar), optional PECVD-capable gas manifold with mass flow controllers (MFCs) |
| Brand | CEAULIGHT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region | Domestic (China) |
| Model | CEL-OPTH-V |
| Price Range | USD 14,000 – 28,000 |
| Reaction Pressure | Ambient (Atmospheric) |
| Reaction Temperature | Up to 800 °C |
| Catalyst Loading Capacity | 1–10 g |
| Heating Power | 1.0 kW (Three-Zone Control, 220 V/50 Hz) |
| Temperature Uniformity | ±1 °C over 30 mm Work Zone |
| Quartz Tube Diameter | 30 mm |
| Light Source | 300 W PerkinElmer Xenon Lamp |
| Effective Irradiance | 500–2000 mW/cm² (Adjustable via M62 Filter Mount) |
| Light Delivery | Fiber-Coupled Quartz Light Guide |
| Gas Interface | 3 mm Swagelok Fitting |
| Optional Modules | High-Vacuum System (10⁻³ Pa), Mass Flow Controller (CEL-GPPCN), GC/HPLC/IC Analysis Integration |
| Brand | CEAULIGHT |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | CEL-OPTH-VI |
| Price Range | USD 14,000 – 28,000 |
| Reaction Pressure | Ambient (Atmospheric) |
| Maximum Reaction Temperature | < 800 °C |
| Catalyst Loading Capacity | 1–10 g |
| Heating Power | 1000 W (220 V, 50 Hz) |
| Temperature Control Range | Room Temp. to 800 °C (±0.1 °C accuracy) |
| Programmable Ramp | 64-segment PID control |
| Uniformity Zone | >30 mm axial length, ΔT ≤ ±1 °C |
| Quartz Tube ID | 30 mm, UV-grade fused silica |
| Illumination Port Diameter | 30 mm |
| Catalyst Bed Dimensions | 28 mm × 22 mm |
| Gas Flow Interface | 3 mm stainless steel tubing with Swagelok compression fittings & KF16 quadruple flange |
| Vacuum Capability (Optional) | High vacuum module down to 10⁻³ Pa (turbo-molecular pump) or low vacuum (<10 Pa) with oil-sealed rotary vane pump |
| Control Interface | 7-inch industrial touchscreen HMI (MCGS software), integrated thermocouple inputs (3×), external heating zone interfaces (2×), optical coupling port (1×) |
| Brand | CEAULIGHT (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | CEL-PAEM-D6 |
| Reaction Pressure | < 0.1 MPa |
| Reaction Temperature | 25 °C (ambient-controlled) |
| Catalyst Loading Capacity | < 1 g |
| Vacuum Level | –0.1 MPa (72 h dynamic stability) |
| Gas Circulation Rate | 1.8 L/min |
| Reactor Volumes | 50 mL / 100 mL / 250 mL (optional photochemical, gas–solid, or membrane reactors) |
| Detection Limits | H₂/O₂ ≥ 0.001 mL |
| Sampling Modes | Manual & Fully Automatic (patented dual-4-port / proprietary 6-port / automated dual-6-port valve configurations) |
| Control Interval | 0–9999 min |
| Injection Cycles | 0–9999 |
| Vacuum Pump | 2 L/s, with anti-backflow solenoid valve and 12 mm stainless-steel bellows (1.6 m) |
| Frame | Dual-layer aluminum alloy structure (560 × 450 × 880 mm) |
| Light Source Mounting | Rear-positioned with precision gear-rack vertical adjustment stage |
| Optional GC | GC-7920 (CEAULIGHT), Shimadzu GC-2014 |
| Optional Lamps | CEL-PF300-T8, CEL-PE300-3A, HXF300 (Xe) |
| Optional Filters | Quartz metal-coated, 254–940 nm (dozens available) |
| Auxiliary Equipment | H₂ generator, air generator, dedicated pressure regulator |
| Brand | CEL (Zhongjiao Jinyuan) |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Zhongjiao Jinyuan Co., Ltd. |
| Type | Domestic |
| Model | CEL-PAEM-D8 |
| Operating Pressure | −0.1 MPa (vacuum) |
| Max Reaction Temperature | 200 °C |
| Catalyst Loading Capacity | 250 mL |
| Reactor Volumes | 25 / 50 / 100 / 250 mL |
| Gas Circulation Flow Rate | 1.8 L/s (corrosion-resistant blower) |
| Vacuum Pump Speed | 2 L/s with anti-backflow solenoid valve |
| Detection Limits | H₂/O₂ ≥ 0.001 mL |
| Sampling Modes | Manual or Software-Controlled Automatic (8-position, temperature-controlled valves <200 °C) |
| Control Interface | USB & RJ45 |
| Measurement Resolution | 0.01 mL & 0.01 min |
| Enclosure Dimensions | 560 mm (W) × 470 mm (D) × 860 mm (H) |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | CFRD-L2G2-500 |
| Max Operating Pressure | 10 MPa(a) |
| Max Operating Temperature | 500 °C |
| Catalyst Bed Volume per Channel | 1–5 mL |
| Heating Zone Length | 240 mm |
| ±2 °C Isothermal Zone Length | 50 mm |
| Footprint | 0.6 m² |
| Remote Control | Yes (Web-based HMI via Ethernet/WiFi) |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | CFRF-L1G3-600 |
| Design Temperature | 600 °C |
| Design Pressure | 6 MPa (60 bar) |
| Catalyst Bed Volume | 1–5 mL |
| Heating Zone Configuration | Triple-Zone Furnace (80 mm isothermal length per zone) |
| Reactor Tube Material | Hastelloy C-276 |
| Gas Inlets | 3 independent mass-flow-controlled channels |
| Liquid Inlet | 1 precision syringe pump or HPLC-grade liquid delivery channel |
| Safety Systems | Integrated pressure relief valve, dual-stage overtemperature/overpressure alarms, combustible gas detector with audible/visual alert |
| Power Supply | 220 V, 50 Hz |
| Dimensions (W×D×H) | 1000 mm × 500 mm × 1830 mm |
| Data Interface | Local HMI touchscreen + Ethernet-enabled remote PC control (Modbus TCP / OPC UA compatible) |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CFRF-L1G3-600-100 |
| Reaction Pressure | 10 MPa |
| Maximum Reaction Temperature | 800 °C |
| Catalyst Loading Capacity | 0.5–5 mL |
| Heating Configuration | Triple-Zone Electric Furnace (for floor-standing unit) / Oil-Jacketed Bath (for benchtop unit, max 300 °C) |
| Display | 10.1" TFT Touchscreen HMI |
| Remote Control | Yes, via PC-based SCADA software |
| Safety Features | Dual-stage over-temperature/over-pressure interlock, combustible gas monitoring, automatic shutdown |
| Brand | Chemn |
|---|---|
| Model | KMCFRF-G3-900 |
| Origin | Anhui, China |
| Reactor Type | Benchtop Fixed-Bed Catalytic Reactor |
| Maximum Operating Pressure | 10 MPa |
| Maximum Operating Temperature | 1000 °C |
| Catalyst Bed Volume | 0.5–5 mL |
| Heating Configuration | Triple-Zone Electric Furnace |
| Safety Features | Dual-Stage Pressure/Temperature Alarm & Interlock Protection |
| Remote Control | PC-based Software Interface with Real-Time Monitoring & Actuation |
| Gas Boosting Capability | Integrated Air-Driven Gas Booster (Up to 19 MPa) with 4–10 L Storage Tank |
| Construction | Powder-Coated Steel Frame |
| Reaction Tube Material | Hastelloy C-276 Outer Tube + Internally Nested Constricted Quartz Liner |
| Flow Control | High-Pressure Mass Flow Controllers (MFCs) with Back-Pressure Regulation |
| Modular Design | Customizable Reactor Tube Length & Inner Diameter |
| Compliance | Designed for GLP-compliant catalyst screening under ISO 17025-aligned laboratory practices |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | KMCFRF-L2G3-300 |
| Pressure Rating | 10 MPa |
| Maximum Reaction Temperature | 300 °C |
| Catalyst Bed Volume | 1–5 mL |
| Heating Configuration | Triple-Zone Electric Furnace (for main reactor) / Oil-Jacketed Bath (for desktop variant) |
| Control Interface | 10.1″ TFT Touchscreen + PC-Based Remote Software |
| Safety Compliance | Dual-Stage Over-Temperature/Over-Pressure Interlock, Real-Time H₂ & Combustible Gas Monitoring |
| Modularity | Fully Modular Reactor Tube, Customizable Length & ID |
| Online Sampling | Integrated Liquid Phase Online Sampling Valve System |
| Remote Operation | Yes, via Ethernet-connected SCADA-grade control software |
| Brand | CHEMn |
|---|---|
| Origin | Anhui, China |
| Model | TFG-1200-100-II-300 |
| Max. Operating Temperature | 1200 °C |
| Max. Working Pressure | 100 kPa (gauge) |
| Catalyst Loading Capacity | Customizable |
| Compliance | Designed for laboratory-scale catalyst activation under controlled atmospheres |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Chemn Multi-Functional Benchtop Continuous Flow Reactor / Fixed-Bed Reactor (Window-Type, Customizable) |
| Price Range | USD 11,200 – 28,000 (based on configuration) |
| Catalyst Bed Volume | 0.5–5 mL |
| Max Design Temperature | 800 °C |
| Max Design Pressure | 100 bar |
| Gas/Liquid Feed Channels | 1–4 (configurable) |
| Gas MFC Accuracy | ±1.5% FS, Repeatability: ±0.2% FS |
| High-Pressure Liquid Pump Range | 0–10 mL/min, Max Outlet Pressure: 42 MPa, Control Precision: ±1% |
| System Dimensions (W×D×H) | ~650×1000×900 mm |
| Weight | ~180 kg |
| Control System | Siemens S7-1200 PLC + 10.2″ MCGS HMI |
| Power Supply | 200–240 V AC, 50–60 Hz |
| Reactor Materials | 316L SS, Hastelloy C-276, Inconel 600 (customer-specified) |
| Brand | FD |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | FD Catalyst Co., Ltd. |
| Model | FDGDC-1L |
| Design Pressure | 0.3 MPa |
| Maximum Operating Temperature | 750 °C |
| Catalyst Bed Volume | 1 L |
| Reactor Material | 316L Stainless Steel |
| Aspect Ratio (H/D) | ≥8:1 |
| Temperature Range | Ambient to 850 °C |
| Design Temperature | 900 °C |
| Feed Configuration | 1 Liquid + 5 Gas Inlets (N₂ purge included) |
| Gas Flow Rates | Air (30 NL/min), O₂ (6 NL/min), N₂ (24 NL/min), CH₄ (1 NL/min), H₂S (1 NL/min) |
| Control System | PLC + PC-based HMI |
| Optional Integrated Modules | Condenser + Gas-Liquid Separator + Online GC |
| Brand | HEL (UK) |
|---|---|
| Origin | United Kingdom |
| Model | CAT 7 / CAT 18 / CAT 24 |
| Max. Operating Pressure | 100 bar |
| Max. Operating Temperature | 300 °C |
| Catalyst Bed Volume | 10 mL |
| Vessel Material | 316 Stainless Steel or Hastelloy® Alloy |
| Sample Capacity Options | 2–10 mL per vessel |
| Heating Method | External (hotplate, oil bath, or PolyBlock™ heater block) |
| Stirring | Magnetic stirring integrated |
| Temperature Monitoring | Integrated micro thermocouple |
| Cooling Option | Finger-type condenser (CAT 7 & CAT 24 only) |
| HPLC Vial Compatibility | 2 mL vials (CAT 18 only) |
| Purge & Pressurization | Manual valve-controlled inert gas purge and reactant gas pressurization (e.g., H₂) |
| Brand | HEL (UK) |
|---|---|
| Origin | United Kingdom |
| Model | ChemSCAN & ChemSCAN Custom |
| Operating Pressure | 200 bar |
| Operating Temperature | −60 °C to 200 °C |
| Catalyst Bed Volume | 120 mL |
| Reactor Configuration | 8 independently controlled parallel reactors |
| Standard Vessel Capacity | 16 mL |
| Optional Vessel Capacities | 25 mL, 50 mL, 75 mL, 120 mL, 160 mL, 300 mL, 400 mL |
| Stirring Options | Magnetic suspension stirring, overhead mechanical stirring (optional), stir-controlled per reactor |
| Gas Consumption Monitoring | Real-time, reactor-specific calculation |
| Liquid Dosing | Optional automated high-pressure liquid injection |
| Compliance | Designed for GLP/GMP-aligned R&D environments |
| Brand | HEL |
|---|---|
| Origin | UK |
| Model | DigiCAT 96 |
| Max. Reaction Pressure | 100 bar |
| Max. Reaction Temperature | 200 °C |
| Catalyst Loading Volume | 1 mL per vial |
| Throughput | 96 parallel reactors |
| Heating Block Material | Aluminum |
| Stirring | Synchronized magnetic stirring per vial |
| Safety Valve Setpoint | ~35 bar (standard configuration) |
| Dimensions (W×D×H) | 350 × 300 × 400 mm |
| Pressure Vessel Dimensions | 125 × 85 × 60 mm |
| Control Interface | PC-connected software with real-time monitoring and automated sequence programming |
| Actuation | Solenoid feed & vent valves |
| Temperature Control | PID-regulated, sensor-integrated aluminum heating block |
| Compliance | Designed to meet CE marking requirements for laboratory pressure equipment (PED 2014/68/EU applicable to < 200 bar systems under Category I) |
| Brand | HEL |
|---|---|
| Origin | United Kingdom |
| Model | DigiCAT |
| Reaction Pressure | 100 bar (max. 200 bar) |
| Reaction Temperature | 200 °C (max. 300 °C) |
| Catalyst Bed Volume | 75 mL |
| Compatible Reactor Formats | CAT-7, CAT-18, CAT-24, and custom vessels (16–75 mL) |
| Control Interface | PC-based software with integrated electromagnetic inlet/outlet valves, real-time T&P monitoring, safety relief valve setpoint: ~35 bar |
| Heating Method | Bottom-mounted aluminum heating block with PID temperature control |
| Stirring Mechanism | Internal magnetic stirrer drive coupled to external motor via high-strength permanent magnet array |
| Brand | HEL |
|---|---|
| Origin | United Kingdom |
| Model | FlowCAT & FlowCAT Custom |
| Operating Pressure | 200 bar |
| Operating Temperature | 550 °C |
| Catalyst Bed Volume | 30 mL |
| Reactor Materials | 316 Stainless Steel or Hastelloy |
| Standard Reactor Internal Diameter | 6 mm (¼") or 12 mm (½") |
| Active Heating Zone Length | 10 cm |
| Liquid Feed Rate Range | 0.001–10 mL/min or 0.01–50 mL/min |
| Gas Feed Control | Mass Flow Controllers (e.g., H₂) |
| Flow Modes | Trickle-Bed, Bubble-Column, Fixed-Bed Continuous Flow |
| Optional Configurations | Single or Parallel Reactor Systems |
| Compliance | Designed for GLP/GMP-aligned operation with audit-trail-capable software |
| Brand | HEL (UK) |
|---|---|
| Origin | United Kingdom |
| Model | PolyCAT 4, PolyCAT 8 |
| Maximum Operating Pressure | 200 bar |
| Maximum Operating Temperature | 550 °C |
| Catalyst Bed Volume | 30 mL |
| Reactor Volume | 16 mL (standard) |
| Temperature Control Range | 25–250 °C (inter-reactor ΔT ≤ 100 °C) |
| Liquid Feed Rate | 0.001–10 mL/min or 0.01–50 mL/min |
| Gas Feed | Mass-flow controlled (e.g., H₂), continuously adjustable |
| Configuration Options | 4-channel parallel or 8-channel parallel |
| Brand | Henven |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region | Domestic (China) |
| Model | HJDS |
| Price Range | USD 28,000 – 42,500 (FOB Beijing) |
| Maximum Reaction Pressure | 10 MPa |
| Maximum Reaction Temperature | 500 °C |
| Catalyst Bed Volume | 5 mL |
| Reactor Dimensions | 20 mm × 4 mm × 600 mm (ID × Wall Thickness × Length) |
| Liquid Flow Rate Capacity | 150 mL/min |
| Maximum Allowable Pressure Drop Across Catalyst Bed | ≤ 0.3 MPa |
| Temperature & Pressure Control Accuracy | ±1% of setpoint |
| Brand | hte |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | X2000 |
| Price Range | USD 1,500 – 150,000 (FOB Hamburg) |
| Brand | hte |
|---|---|
| Origin | Germany |
| Product Type | Imported Laboratory Catalyst Evaluation System |
| Model | X3000 Series Gas-Liquid Reaction System |
| Price Range | USD 1,500 – 150,000 (FOB Hamburg) |
| Brand | hte |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | X4500 |
| Pricing | Upon Request |
| Origin | Anhui, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | Continuous-Flow Fixed-Bed Reactor |
| Price Range | USD 7,000 – 14,000 (FOB) |
| Max Operating Temperature | 800 °C |
| Max Operating Pressure | 10 MPa (Note: “100℃” in source is erroneous |
| Catalyst Bed Volume | 0.5–5 mL |
| Reactor Tube Material Options | ASTM A269 TP316L stainless steel, Hastelloy C-276, Inconel 600 |
| Gas Flow Control | Multi-channel MFCs (0.005–10 SLPM, ±1.5% FS accuracy, ±0.2% FS repeatability) |
| Liquid Feed | High-Pressure Metering Pump (0–10 mL/min, up to 42 MPa, ±2% RD control precision) |
| System Dimensions (L×W×H) | ~650 × 1000 × 900 mm |
| Weight | ~180 kg |
| Power Supply | 200–240 V AC, 50–60 Hz |
| Control System | Siemens S7-1200 PLC + 10.2″ MCGS HMI with DCS-style interface (real-time P&ID visualization, trend logging, alarm management) |
| Brand | Ahkemi |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CFRD |
| Price Range | USD 1,400 – 14,000 (FOB) |
| Maximum Operating Pressure | 10 MPa (100 bar) |
| Maximum Operating Temperature | 800 °C |
| Catalyst Bed Volume | 0.5–5 mL |