- All
- Favorite
- Popular
- Most rated
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Model 300S |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength Range | 195–600 nm |
| Optical Configuration | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Light Source for Detection | 650 nm Near-Infrared Laser (<5 mW, FCC Class I Eye-Safe) |
| Detector Element | Sealed, Large-Area Silicon Photodiode with Integrated High-Gain Amplifier |
| Minimum Detectable Mass | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height: 3 s) |
| Dynamic Range (Normal Gain) | 3 decades |
| Dynamic Range (Extended Mode) | 4–4.5 decades |
| Mobile Phase Flow Rate Compatibility | Up to 5 mL/min |
| Carrier Gas | Nitrogen or other inert gas |
| Gas Pressure Requirement | 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Integrated Gas Pressure Regulation | Yes (Built-in Regulator & Overpressure Protection) |
| Auto Shut-off Valve | Yes (Timed Delay Cutoff) |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass (Optical Lens) |
| User Interface | Vacuum Fluorescent Display (VFD) + 4 Multifunction Keys |
| Onboard Method Storage | 10 Methods |
| Signal Output Options | Fixed 10 mV / 5 V |
| Communication Interface | RS-232 (Rear Panel) |
| Power Supply | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | Shodex |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | RI-201H |
| Instrument Type | Refractive Index Detector (RID) |
| Compatible System | High-Performance Liquid Chromatography (HPLC) |
| Refractive Index Range | 1.00–1.75 |
| Detection Range | 0.25–512 μRIU |
| Drift | ≤0.2 μRIU/h (deionized water, 1 mL/min, purge off) |
| Linearity | ≥600 μRIU |
| Noise | ≤2.5 nRIU (deionized water, 1.5 s response) |
| Response Time Settings | 0.1, 0.25, 0.5, 1, 1.5, 2, 3, 6 s |
| Auto-Zero | Full-range automatic zeroing |
| Offset Adjustment Range | ±10 μRIU |
| Offset Resolution | 50 nRIU |
| Cell Volume | 8 µL |
| Flow Rate Range | 0.2–3.0 mL/min (typical), up to 10 mL/min (water) |
| Max Backpressure | 50 kPa |
| Internal Dead Volume | IN→Cell ≈60 µL |
| Temperature Control | OFF, 30–55 °C (1 °C increments), 77 °C thermal cutoff |
| Interface | USB |
| Wetted Materials | SS316, PTFE, fused silica |
| Power | AC 100–240 V ±10%, 50/60 Hz, 150 VA |
| Dimensions & Weight | 260 × 400 × 150 mm (W×D×H), ~12 kg |
| Brand | Shodex |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | RI-201 |
| Instrument Type | Refractive Index Detector (RID) |
| Compatible System | HPLC |
| Refractive Index Range | 1.00–1.75 |
| Detection Range | 0.125–256 µRIU |
| Drift | ≤0.1 µRIU/h |
| Noise | ≤1 nRIU |
| Linear Range | ≥300 µRIU |
| Flow Rate (Typical) | 0.2–3.0 mL/min |
| Max Flow Rate (Water) | 10 mL/min |
| Cell Volume | 8 µL |
| Dead Volume (IN→Cell) | ~80 µL |
| Dead Volume (Cell→OUT) | ~600 µL |
| Total Dead Volume | ~690 µL |
| Temperature Control Range | 30–55 °C (1 °C increments), with dual-stage thermal regulation |
| Response Time Settings | 0.1, 0.25, 0.5, 1, 1.5, 2, 3, 6 s |
| Auto-Zero Function | Full-range, fully automatic |
| Offset Adjustment Range | ±5 µRIU |
| Offset Resolution | 25 nRIU |
| Analog Output | DC 0–1 V (4 mV/µRIU or 16 mV/µRIU selectable) |
| Recorder Output | 0–10 mV/FS |
| Communication Interface | USB |
| Wetted Materials | SUS316 Stainless Steel, PTFE, Quartz Glass |
| Power Supply | AC 100–240 V ±10%, 50/60 Hz, 150 VA |
| Dimensions & Weight | 260 × 400 × 150 mm (W×D×H), ~12 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | 300s ELSD |
| Detection Principle | Evaporative Light Scattering Detection (ELSD) |
| Wavelength Range | 200 nm (UV cutoff, not emission wavelength) |
| Optical Configuration | Dual-beam |
| Light Source | Deuterium Lamp (for baseline stability reference), NIR Laser (650 nm, <5 mW) as primary scattering source |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Sensitivity | 100 pg glucopyranoside (micro-HPLC, 2 µL direct injection, peak width at 10% height = 3 s) |
| Dynamic Range | 3 orders of magnitude (standard gain), extendable to 4–4.5 orders with gain optimization |
| Flow Rate Compatibility | Up to 5 mL/min (HPLC & preparative LC) |
| Gas Requirement | N₂ or inert gas, 50 psi supply, ≤2.5 L/min consumption |
| Integrated Pressure Regulation | Yes, with automatic shutoff delay and overpressure protection |
| Signal Output | Fixed 10 mV or 5 V |
| Interface | RS-232 (rear panel), digital status I/O (zero control, valve control, error reporting) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | CoMetro |
|---|---|
| Model | RI2000 |
| Detection Principle | Differential Refractometry |
| Refractive Index Range | 1.00–1.75 |
| Flow Rate Range | 0.2–3.0 mL/min |
| Linear Range | 0–1000 µRIU (80 × 10⁻⁵ RIU) |
| Noise Level | 5 × 10⁻¹⁰ RIU (typical) |
| Auto-Zero Range | ±40 × 10⁻⁵ RIU |
| Auto-Zero Resolution | 5 × 10⁻¹⁰ RIU |
| Cell Volume | 9 µL |
| Maximum Cell Pressure | 6 kg/cm² (≈0.6 MPa) |
| Temperature Control | Ambient, 35 °C or 55 °C (microprocessor-regulated) |
| Analog Outputs | ±1 V (integrator), ±10 V (recorder) |
| selectable gains | 10 mV, 100 mV, 1 V |
| Digital I/O | TTL-compatible inputs/outputs (5 Vdc or 12 Vdc) for marker, polarity, wash, auto-zero, temperature, solvent recirculator |
| Power Supply | 220 V AC, 50/60 Hz, 80 VA |
| Dimensions | 58.4 cm (W) × ? cm (D) × ? cm (H) |
| Weight | 16 kg (35 lbs) |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | 300s |
| Detection Principle | Evaporative Light Scattering (ELSD) |
| Wavelength | 650 nm (Near-Infrared Laser) |
| Beam Configuration | Dual-Beam |
| Light Source | 650 nm NIR Laser (<5 mW, FCC Eye-Safe Compliant) |
| Nebulizer | PTFE-Coated Stainless Steel Capillary |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Sensitivity | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height = 3 s) |
| Dynamic Range | 3 decades (normal/low gain), extendable to 4–4.5 decades with signal processing |
| Flow Rate Compatibility | Up to 5 mL/min (HPLC & preparative LC) |
| Gas Requirement | N₂ or other inert gas, 50 psi inlet pressure |
| Gas Consumption | ≤2.5 L/min |
| Integrated Pressure Regulation | Yes, with automatic shutoff delay and overpressure protection |
| Fluidic Path Materials | PTFE, 316 stainless steel, alumina, borosilicate glass (optical lens) |
| User Interface | Vacuum Fluorescent Display (VFD), 4 multifunction buttons |
| Onboard Method Storage | 10 user-defined methods |
| Signal Output | Fixed 10 mV or 5 V |
| Digital Interface | RS-232 (rear panel) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300S |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength Range | 195 nm (UV-Vis Deuterium Lamp for Optional UV Monitoring) |
| Detection Mode | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared Diode (<5 mW, FCC Class I Eye-Safe) |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Normal/Low Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | Nitrogen or inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Liquid Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass |
| Interface | RS-232 |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300S |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength | 195 nm (Deuterium Lamp, Dual-Beam Configuration) |
| Nebulizer | PTFE-Coated Stainless Steel |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Control | 10–70 °C |
| Light Source | Near-Infrared Laser (650 nm, <5 mW, FCC Class I Eye-Safe) |
| Detector | Sealed High-Gain Silicon Photodiode |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Standard Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Liquid Path Materials | PTFE, 316 Stainless Steel, Alumina, Borosilicate Glass (Optics) |
| User Interface | Vacuum Fluorescent Display (VFD), 4 Multifunction Keys |
| Onboard Method Storage | 10 Protocols |
| Signal Output | Fixed (10 mV / 5 V) or Adjustable (0–5 V) |
| Communication | RS-232 (Rear Panel) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | CoMetro |
|---|---|
| Model | RI-2000 |
| Detector Type | Refractive Index Detector (RID) |
| Compatible System | Liquid Chromatography (HPLC/UHPLC) |
| Refractive Index Range | 1.00–1.75 |
| Flow Rate Range | 0.2–3.0 mL/min |
| Linear Range | 80 × 10⁻⁵ RIU |
| Noise Level | 5 × 10⁻¹⁰ RIU |
| Auto-Zero Range | 40 × 10⁻⁵ RIU |
| Auto-Zero Resolution | 5 × 10⁻¹⁰ RIU |
| Integrator Output | ±1 V |
| Recorder Output | ±10 V |
| Analog Input/Output | ±5 VDC (TTL/12 VDC compatible) |
| Cell Volume | 9 µL |
| Maximum Cell Pressure | 6 kg/cm² (≈0.6 MPa) |
| Temperature Control Options | Ambient, 35°C, or 55°C (microprocessor-controlled) |
| Dimensions | 58.4 × 45.7 × 21.3 cm (W × D × H) |
| Weight | 16 kg |
| Power Supply | 220 V, 50/60 Hz, 80 VA |
| Brand | SofTA |
|---|---|
| Model | M300s ELSD |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Light Source | Deuterium Lamp |
| Wavelength Range | 200 nm |
| Detection Mode | Dual-Beam |
| Nebulizer Material | PTFE (Teflon) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Light Source Wavelength | 650 nm (Near-Infrared Laser, <5 mW, FCC Eye-Safe) |
| Detection Element | Sealed Large-Area Silicon Photodiode with Built-in High-Gain Amplifier |
| Sensitivity | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height = 3 s) |
| Dynamic Range | 3 decades (normal/low gain), extendable to 4–4.5 decades |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or other inert gas at 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass |
| User Interface | Vacuum Fluorescent Display (VFD), 4 multifunction buttons |
| Signal Output | Fixed 10 mV / 5 V |
| Communication | RS-232 rear-panel interface |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Model 100 |
| Detection Principle | Evaporative Light Scattering Detection (ELSD) |
| Compatible System | HPLC / UHPLC |
| Light Source | 670 nm Laser (<5 mW) |
| Nebulizer Gas | N₂ or inert gas (50 psi, ~2.5 SLPM) |
| Operating Temperature | 55 °C (evaporator), ambient to 85 °C (environment) |
| Flow Rate Range | 0–5 mL/min |
| Detector Response | Mass-sensitive, gradient-compatible |
| Detection Limit | 10 ng (on-column, typical) |
| Dynamic Range | >4 orders of magnitude |
| Precision | <2% RSD |
| Output Signal | 0–5 VDC analog |
| Interface | RS-232 |
| Power Requirement | 120/240 VAC, 50/60 Hz, 600 W |
| Dimensions | 9.8" W × 18" D × 11.5" H |
| Weight | 23 lbs |
| Construction Materials | Stainless steel fluid path, Teflon™ tubing, fused silica optical windows |
| Environmental Rating | Indoor use only |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300s |
| Compatible Instrument | HPLC Systems |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength Range | 200 nm (UV-Vis spectral cutoff, not tunable source) |
| Detection Mode | Dual-Beam |
| Light Source | Deuterium Lamp (for baseline stability reference), 650 nm Near-Infrared Laser (primary scattering source) |
| Nebulizer | PTFE (Teflon®) Capillary |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Sensitivity | 100 pg glucopyranoside (micro-HPLC, 2 µL direct injection, 3 s peak width at 10% height) |
| Dynamic Range | 3 decades (standard gain), up to 4.5 decades (extended range mode) |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas, 50 psi supply pressure |
| Gas Consumption | ≤2.5 L/min |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300s |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength Range | 195–600 nm |
| Optical Configuration | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared, <5 mW (FCC Class I Eye-Safe) |
| Detector Element | Sealed, High-Gain Silicon Photodiode |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Normal/Low Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Mobile Phase Flow Rate Support | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass |
| User Interface | Vacuum Fluorescent Display (VFD), 4 Multifunction Keys |
| Onboard Method Storage | 10 Methods |
| Signal Output | Fixed (10 mV / 5 V) or Adjustable (0–5 V) |
| Communication | RS-232 (Rear Panel) |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Evaporative Light Scattering Detector (ELSD) |
| Compatible System | HPLC (Analytical & Preparative) |
| Wavelength Range | 195–600 nm |
| Detection Mode | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared Diode (<5 mW, FCC Class I Eye-Safe) |
| Detector Element | Sealed Large-Area Silicon Photodiode with Integrated High-Gain Amplifier |
| Minimum Detectable Mass | 100 pg Glucopyranoside (Micro-HPLC, 2 µL Direct Injection, 3 s Peak Width at 10% Height) |
| Dynamic Range | 3 orders of magnitude (Normal/Low Gain), Extended to 4–4.5 orders with gain optimization |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Supply | Nitrogen or inert gas, 50 psi inlet pressure |
| Gas Consumption | ≤2.5 L/min |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Optical Glass |
| User Interface | Vacuum Fluorescent Display (VFD) with 4 Multifunction Keys |
| Onboard Method Storage | 10 Methods |
| Signal Output | Fixed 10 mV or 5 V |
| Digital Interface | RS-232 (Rear Panel) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Model 300s |
| Detection Principle | Evaporative Light Scattering Detection (ELSD) |
| Wavelength Range | 195–600 nm |
| Optical Configuration | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared Diode (<5 mW, FCC Class I Eye-Safe) |
| Detector | Sealed Large-Area Silicon Photodiode with Integrated High-Gain Amplifier |
| Minimum Detectable Mass | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height: 3 s) |
| Dynamic Range | 3 decades (standard gain), up to 4.5 decades with extended range mode |
| Mobile Phase Flow Rate Compatibility | Up to 5 mL/min |
| Gas Supply | N₂ or other inert gas, 50 psi inlet pressure |
| Gas Consumption | ≤2.5 L/min |
| Liquid Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass (optical lens) |
| User Interface | Vacuum Fluorescent Display (VFD), 4 multifunction buttons |
| Data Output | Fixed 10 mV / 5 V analog |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Model | M300s |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength Range | 195–600 nm |
| Detection Method | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Light Source for Scattering Detection | 650 nm Near-Infrared Laser (<5 mW, FCC Eye-Safe) |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Normal/Low Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Maximum Liquid Flow Rate | 5 mL/min |
| Gas Supply | N₂ or other inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Gas Pressure Regulation | Integrated pressure regulator and overpressure protection |
| Auto Shut-off Valve | Delayed closure after operation |
| Wetted Materials | PTFE, stainless steel, alumina, borosilicate glass |
| Signal Output | Fixed 10 mV or 5 V |
| Interface | RS-232 (rear panel) |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Model | M300s |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength Range | 195 nm (Deuterium Lamp) |
| Detection Principle | Dual-Beam Light Scattering |
| Light Source | Deuterium Lamp |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulizer Zone Temperature Range | 10–70 °C |
| Nebulizer Material | PTFE (Teflon®) |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC) |
| Peak Width (10% height) | 3 s (2 µL direct injection) |
| Dynamic Range | 3 orders of magnitude (normal/low gain) |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas at 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Interface | RS-232 |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
Show next