- All
- Favorite
- Popular
- Most rated
| Brand | HTA |
|---|---|
| Origin | Italy |
| Model | HT4150L |
| Instrument Type | Multifunctional Autosampler |
| Max Sample Capacity | 32 tubes (2 × 16-position racks) |
| Minimum Dispensing Volume | 0.1 mL |
| Quantitative Loop Volumes | 1 mL and 2.5 mL |
| Positioning Accuracy | < 0.2 mm |
| Motion Architecture | XYZ three-axis robotic arm |
| Needle Wash | Internal and external wall rinsing |
| Repeat Injection Capability | Unlimited cycles |
| Brand | Tlyon (Distributor) |
|---|---|
| Origin | Hungary |
| Manufacturer | RotaChrom GmbH |
| Instrument Type | Benchtop Centrifugal Partition Chromatograph |
| Software Components | CPC Simulator, CPC Visualizer |
| Flow Rate Range | 0.1–25 mL/min |
| Sample Load Capacity | 10 mg–5 g per cycle |
| Detection | UV-Vis (200–600 nm), optional ELSD/MS interface |
| Fraction Collection | Automated, timed or peak-triggered |
| Compliance | GLP-ready architecture, audit trail-capable software logging, ISO/IEC 17025-aligned operation |
| Brand | SFE / SFE PROCESS |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SFE SAS/RESS |
| Price Range | USD 210,000 – 280,000 (FOB Le Havre) |
| Max Temperature | 150 °C |
| Channels | 1 |
| Extraction Volumes | 1 L & 500 mL |
| Max Pressure | 1000 bar |
| Max CO₂ Mass Flow Rate | 70 g/min |
| Primary Application | Nanoparticle Synthesis via Supercritical Anti-Solvent (SAS) and Rapid Expansion of Supercritical Solutions (RESS) Processes |
| Co-solvent Pump | Integrated |
| Solvent Recovery | Yes |
| CO₂ Recovery | Yes |
| Spray Nozzle Vessels | Dual (500 mL & 1 L) |
| Automatic Venting Valve Bank | Yes |
| Precision Mass Flow Control | Coriolis-based |
| Control Architecture | PLC with HMI, Recipe Management, Remote Monitoring Capability, Unattended Operation Support |
| Brand | Masa |
|---|---|
| Origin | Slovakia |
| Model | MCCGC-AIMS |
| Sample Introduction | Automated |
| Sensitivity | ppb to ppt |
| Library | VOCs, Explosives |
| Operating Pressure | 600–1200 mbar |
| Drift Gas Flow | 500–1200 mL/min |
| Sample Gas Flow | 2–500 mL/min |
| Drift Field Strength | 200–560 V/cm |
| Polarity | Positive/Negative |
| Ionization Source | Corona Discharge (Non-radioactive) |
| Pre-separation GC | Multi-Capillary Column Gas Chromatograph |
| IMS Temperature Range | 30–140 °C |
| Resolution (FWHM) | 90–100 (N₂/air) |
| Power Supply | 250 V / 24 V |
| Communication | TCP/IP, USB 2.0 |
| Dimensions (mm) | 490 × 390 × 150 |
| Brand | SFE Process |
|---|---|
| Origin | France |
| Model | SFE LAB100 |
| Maximum Pressure | 1000 bar |
| Maximum Temperature | 150 °C |
| Extraction Vessel Volume | 100 mL |
| CO₂ Mass Flow Rate | 70 g/min |
| Number of Independent Extraction Channels | 2 |
| Co-solvent Pump | Integrated |
| Fractionation Vessels | 2 × 300 mL |
| Cryogenic Trap Capacity | Standard |
| Automatic Valve Switching for Vessel Transfer | Yes |
| Flow Control | Precision Mass Flow Meters |
| Control System | PLC-based, Fully Automated, Recipe-Driven, Unattended Operation |
| Compliance | PED 2014/68/EU (CE Marked), FDA 21 CFR Part 11 Ready, GMP-Compliant Architecture |
| Application Scope | Laboratory R&D, Pharmaceutical Development, Clinical Research, Natural Product Isolation |
| Brand | Drummond |
|---|---|
| Origin | USA |
| Model | Nanoject II Auto-Nanoliter Injector |
| Injection Volume Range | 2.3–69.0 nL |
| Filling Rate | 46 nL/s (fast), 23 nL/s (slow) |
| Injection Rate | 46 nL/s (fast), 23 nL/s (slow) |
| Emptying Rate | 230 nL/s (fast), 92 nL/s (slow) |
| Capillary Material | Borosilicate Glass, Softening Point: 780 °C |
| Included Accessories | 200 borosilicate glass capillaries, maintenance kit, foot switch, universal adapter (3-000-024-A) |
Show next