Water Quality Analyzer
Filter
Showing 1–30 of 182 results
| Brand | Aero |
|---|---|
| Origin | Germany |
| Model | AL2021 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Detection Target | Hydrogen Peroxide (H₂O₂) and Organic Peroxides |
| Linear Range | 100 ppt–3 ppm (gas phase) |
| Detection Limit | 100 ppt (gas) |
| Response Time (10–90%) | 90 s |
| System Delay | ~300 s |
| Dimensions | 50 cm × 49 cm × 13 cm |
| Weight | 20 kg |
| Power Supply | 240 VAC, 60 Hz, 110 W |
| Communication Interface | RS-232 |
| Interference Tolerance | O₃ < 1:3500 |
| NO < 1 | 8000 |
| Automation | Fully microprocessor-controlled with integrated gas-stripping and precision peristaltic pumping |
| Calibration | Auto-calibration via internal H₂O₂ source or liquid standard |
| Brand | Ailun |
|---|---|
| Origin | Qingdao, Shandong, China |
| Model | AL-AC120 |
| Instrument Type | Online Water Quality Analyzer |
| Measuring Parameter | Chemical Oxygen Demand (COD) |
| Measurement Range | 0–5000 mg/L |
| LOD | ≤15 mg/L (±30% error at low end) |
| Repeatability | ≤±5% |
| Low-Concentration Drift | ±5 mg/L |
| High-Concentration Drift | ≤5% |
| Minimum Cycle Time | 20 min |
| Adjustable Sampling Interval | 10–9999 min |
| Digestion Time | Configurable per application |
| Calibration Interval | 1–99 days |
| Maintenance Interval | ~30 days (~60 min/session) |
| Output Interfaces | RS-232, RS-485, 4–20 mA (optional) |
| Operating Temperature | +5 to +28 °C (climate-controlled indoor environment) |
| Relative Humidity | ≤90% non-condensing |
| Power Supply | AC 220 V ±10%, 50 Hz ±10%, 5 A |
| Accuracy (Standard Solution Validation) | ±10.0% at 40.0 mg/L |
| Memory Effect | ±10.0% at 40.0 mg/L |
| Field Sample Comparison Tolerance | ≤5 mg/L for samples <50.0 mg/L |
| Chloride Interference Tolerance | Standard mode ≤2.5 g/L Cl⁻ |
| Control System | Panasonic PLC-based embedded controller |
| Brand | Ailun General / Qingdao Ailun |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AL-SZ5000 |
| Instrument Type | Laboratory Water Quality Analyzer |
| Measured Parameters | COD, Ammonia Nitrogen (NH₃-N), Total Phosphorus (TP), Total Nitrogen (TN) |
| Measurement Range | COD 5–10,000 mg/L |
| Display | 7-inch color LCD touchscreen |
| Optical System | Imported fiber-optic detection system |
| Wavelength Range | 340–900 nm |
| Wavelength Accuracy | ±1 nm |
| Spectral Bandwidth | 4 nm |
| Light Source | Imported 12 V / 20 W halogen lamp (rated life >100,000 h) |
| Detection Method | Cuvette-based colorimetry with pre-filled reagent vials |
| Resolution | 0.001 mg/L (for applicable ranges) |
| Accuracy | ≤±5% FS |
| Repeatability | ≤±2% RSD |
| Pre-stored Calibration Curves | 100 factory-loaded standard curves + 10 user-definable fitting curves |
| Data Storage | Up to 1,000,000 measurement records with timestamped retrieval |
| Auto-calibration | Yes, with fixed reference channel |
| Digestion Unit | Integrated 16-position digestion block (standard configuration) |
| Printer | Built-in thermal printer for real-time and historical data output |
| Data Interface | USB port + RS-232 serial interface |
| Compliance Standards | HJ 535-2009, GB 11893-1989, HJ/T 399-2007 |
| Brand | Ailun |
|---|---|
| Origin | Shandong, China |
| Model | AL-SZ5000Plus |
| Detection Parameters | COD, Ammonia Nitrogen, Total Phosphorus, Total Nitrogen, Turbidity |
| Measurement Range | COD 5–10,000 mg/L |
| Wavelength Range | 340–900 nm |
| Optical Bandwidth | 4 nm |
| Wavelength Accuracy | ±1 nm |
| Display | 7-inch color LCD touchscreen |
| Data Storage | Up to 1,000,000 measurement records |
| Pre-stored Calibration Curves | 280 standard + 50 user-fittable curves |
| Photometric System | Fiber-optic detection architecture |
| Light Source | Imported 12 V / 20 W halogen lamp (≥100,000 h lifetime) |
| Detection Modes | Rotating 360° cuvette holder (pre-filled reagent vials) + dual-channel automatic cuvette loader (powder/solid reagents) |
| Repeatability | ≤±2% |
| Accuracy | ≤±5% |
| Inter-channel Error | ≤±2% |
| Digestion Unit | Integrated 16-position heating block compliant with HJ/T 399–2007 |
| Brand | Alibillia |
|---|---|
| Origin | Switzerland |
| Model | GGUN-FL24 |
| Instrument Type | Laboratory & Field-Deployable Water Quality Analyzer |
| Detection Parameters | Fluorescence (e.g., sodium fluorescein, rhodamine WT, sodium naphthionate), Turbidity, Temperature, Conductivity |
| Fluorescence Detection Limit (sodium fluorescein) | 2 × 10⁻¹¹ g/mL (typ.) |
| Turbidity Range | 0.02–400 NTU |
| Minimum Sampling Interval | 4 s |
| Optical Modules | 4 |
| Temperature Accuracy | ±0.1 °C |
| Temperature Resolution | 0.034 °C |
| ADC Resolution | 24-bit unipolar |
| Operating Current | 8–28 mA |
| Enclosure Material | Stainless Steel |
| Ingress Protection | IP68 |
| Dimensions | Ø48 mm × 270 mm |
| Weight | 2.2 kg |
| Cable Length Options | ≥30 m (cable weight: ~1 kg per 10 m) |
| Power Supply | TRMC-series data loggers (TRMC-GGUN or TRMC-GGUN-COM) |
| Brand | Alibillia |
|---|---|
| Origin | Switzerland |
| Model | GGUN-FL30 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Optical Modules | 4 |
| Turbidity Range | 0.02–400 NTU |
| Fluorescein Sodium Detection Limit | 2 × 10⁻¹¹ g/mL (typical, uranine) |
| Minimum Sampling Interval | 4 s |
| Communication Interface | RS232 |
| Operating Current | 8–28 mA |
| ADC Resolution | 24-bit unipolar |
| Cable Length Options | 15–50 m (1 kg per 10 m) |
| Temperature Accuracy | ±0.1 °C |
| Temperature Resolution | 0.034 °C |
| Dimensions | Ø160 mm × 170 mm (cylindrical) |
| Enclosure Rating & Material | IP68, stainless steel |
| Weight | 7.3 kg |
| Power Supply | TRMC-series data logger |
| Optional Local Data Logger | TRMC-GGUN |
| Remote Data Logger Option | TRMC-GGUN-COM |
| Brand | APURE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | A100ISM |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameters | pH / ORP, Conductivity, Dissolved Oxygen (DO), Residual Chlorine, Turbidity |
| DO Range | 0.00–20.00 mg/L |
| Turbidity Ranges | 0–20 NTU / 0–400 NTU / 0–4000 NTU (customizable) |
| Temperature Compensation | 0–100 °C (manual or automatic) |
| Output | Isolated 4–20 mA (max. load 500 Ω), independent for measured parameter or temperature |
| Alarm Outputs | 3 relay outputs (3 A / 250 V AC, SPST NO), configurable for high/low limits with adjustable hysteresis |
| Power Supply | AC 220 V or DC 24 V |
| Power Consumption | ≤7 W |
| Operating Environment | 0–60 °C, ≤85% RH |
| Dimensions | 96 × 96 × 132 mm (H × W × D) |
| Panel Cutout | 92.5 × 92.5 mm (H × W) |
| Brand | APURE |
|---|---|
| Model | A200ISM |
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Online Water Quality Analyzer |
| Measurable Parameters | pH / ORP, Conductivity, Dissolved Oxygen (DO), Residual Chlorine, Turbidity |
| DO Range | 0.00–20.00 mg/L |
| Turbidity Ranges | 0–20 NTU / 0–400 NTU / 0–4000 NTU (customizable) |
| Temperature Compensation | 0–100 °C (manual or automatic) |
| Output | Isolated 4–20 mA (max. load 500 Ω), independently assignable to parameter or temperature |
| Relay Outputs | 3 configurable SPDT relays (3 A / 250 V AC, NO contact), adjustable hysteresis |
| Power Supply | AC 220 V ±10% or DC 24 V ±10% |
| Power Consumption | ≤7 W |
| Operating Environment | 0–60 °C, ≤85% RH (non-condensing) |
| Dimensions | 144 × 144 × 115 mm (H × W × D) |
| Panel Cutout | 138 × 138 mm |
| Display Language | Chinese (default), switchable to English |
| Enclosure Rating | IP65 (front panel) |
| Brand | Apure |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | KS-300 |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameters | pH, Dissolved Oxygen (DO), Conductivity, Temperature (derived from sensor fusion architecture) |
| Output Interface | 4–20 mA analog output, RS-485 Modbus RTU protocol |
| Power Supply | 12–24 VDC |
| IP Rating | IP67 enclosure |
| Operating Temperature Range | 0–50 °C |
| Sensor Mounting | Submersible or flow-through cell compatible |
| Brand | Apure |
|---|---|
| Model | KS-500 |
| Origin | Shanghai, China |
| Manufacturer | Apure (Shanghai) Co., Ltd. |
| Instrument Type | Online Water Quality Analyzer |
| Measured Parameters | pH (0.01–14.00), Conductivity (0.01–30,000 µS/cm), Turbidity (0.001–4000 NTU), Dissolved Oxygen (0.01–20.0 mg/L), Free Chlorine (0.05–20 mg/L), Temperature (0.1–100.0 °C) |
| Output Interfaces | 2× RS485 (MODBUS RTU), 1× RS232 or DTU option |
| Sample Flow Rate | 400–600 mL/min |
| Inlet/Outlet | G1/2 BSP |
| Dimensions | 1470 × 500 × 400 mm |
| Weight | ~45 kg |
| Operating Sample Temperature | 5–40 °C |
| Power Supply | 100–240 VAC |
| Brand | Apure |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | KS-600 |
| Instrument Type | Online Water Quality Analyzer |
| Measurable Parameters | pH, ORP, Free Chlorine, Turbidity, Temperature |
| Application Scope | Swimming Pools, Secondary Water Supply in Residential Communities, Municipal Water Distribution Networks, Water Treatment Plants, Cooling Water Systems |
| Connectivity | RS485/Modbus RTU, Optional 4G LTE or Ethernet for Cloud Data Upload |
| Compliance Framework | Designed to support GLP-aligned operational logging |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | ODEON |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Detection Parameters | Ntotal, Cl⁻, ClO₂, F⁻, Fe, CN⁻, BZT (Benzotriazole), SiO₂, Cr⁶⁺, Cr, MoO₄²⁻ (Mo), pH, Al³⁺, Br₂, Cu, Ni, Zn, P₂O₅, H₂O₂, N₂H₄ (Hydrazine), Mg²⁺, Mn²⁺, Cu²⁺, Ni²⁺, Ca²⁺, O₃, S²⁻, PO₄³⁻-P, TP (Total Phosphorus), K⁺, Al, Free Chlorine, Total Chlorine, Cyanuric Acid, Hydrazine, Hardness & Total Alkalinity, Turbidity, Benzotriazole, Phenol |
| Photometer Wavelengths | 400 nm, 468 nm, 518 nm, 591 nm, 639 nm |
| Detector | Silicon Photodiode |
| Cuvette Type | Round, 16 mm diameter |
| Data Storage Capacity | Up to 100,000 readings |
| Display | 4-inch high-resolution LCD |
| Protection Rating | IP67 |
| Battery Life | Up to 2000 hours |
| Compliance | GLP-compliant data logging with audit trail, auto-calibration diagnostics, automatic temperature compensation |
| Connectivity | RS-485 digital interface |
| Electrode Compatibility | Single-parameter and 3-in-1 multiplexed sensors (pH/ORP/DO/Conductivity/Turbidity) |
| Accessories | Y-adapter cables, digestion units, pre-filled reagent tubes (liquid/tablet/tube formats), portable carrying case |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | PASTEL UV |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Measured Parameters | Organic Matter (COD, BOD, TOC, TSS), Specific Compounds (NO₃⁻, Detergents) |
| Spectral Range | 200–350 nm |
| Optical Path Lengths | 5 mm and 10 mm |
| Detection Limits (10 mm path) | COD: 1–350 mg/L, BOD: 0.2–350 mg/L, TOC: 0.5–300 mg/L, TSS: 2.5–100 mg/L, Detergent: 0.5–60 mg/L, NO₃⁻: 0.5–40 mg/L, NO₃⁻-N: 0.11–9.03 mg/L |
| Display | 64 × 128 pixel monochrome LCD |
| Interface | RS232C bidirectional |
| Power | Internal rechargeable battery (≥100 measurements per charge) |
| Dimensions (L×W×H) | 35 × 17 × 20 cm |
| Weight | 9 kg |
| Max. Power Consumption | 35 W |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | PASTEL-UV |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Detection Parameters | COD, BOD, TSS, TOC, NO₃⁻, Anionic Surfactant Concentration |
| Optical Range | 200–350 nm |
| Light Source | Pulsed Deuterium Lamp |
| Detector | UV Photodiode Array |
| Cuvette | 5 × 10 mm Quartz |
| Measurement Time | <60 s per sample |
| Data Storage | 200 samples with timestamp, operator ID, sample ID, and location ID |
| Power | Rechargeable battery (≥100 measurements per charge) |
| Dimensions | 320 × 170 × 350 mm |
| Weight | ~5 kg |
| Dilution Range | Auto-dilution from 1:1 to 1:250 |
| Linear Calibration Factor Range | 0.2–2.0 (software-adjustable via UV-PRO) |
| Display | 64 × 128 dot-matrix graphical LCD |
| Interface | RS232C bidirectional |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | STAC2 |
| Instrument Type | Online Water Quality Analyzer |
| Detection Parameters | BOD, COD, TOC, TSS, Nitrate |
| Wavelength Range | 190–800 nm |
| Optical Bandwidth | 1 nm |
| Sample Channels | 4 |
| Flow Cell Path Lengths | 2, 5, 50 mm |
| Measurement Cycle | < 2 min |
| Power Supply | 24 V DC (±0.5 V), 3 A or 100–240 V AC (50–60 Hz) optional |
| Enclosure Rating | IP53 |
| Dimensions (L×W×H) | 400 × 265 × 500 mm |
| Weight | 18 kg |
| Data Interfaces | 1× Ethernet (MODBUS TCP/IP & HMI), 1× Wi-Fi (HMI), 1× USB (data backup/export) |
| Cleaning System | Automatic, compressed air and/or chemical line purge |
| Light Source | Xenon lamp |
| Data Storage | Internal SD card with daily secure backup |
| Operating Temperature | 10–40 °C |
| Mounting | Wall-mounted |
| Digital I/O | MODBUS TCP/IP and RTU compliant |
| Turbidity Compensation | Yes |
| Brand | AQUALABO |
|---|---|
| Origin | France |
| Model | TRIPOD |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Measured Parameters | pH, ORP, Temperature, Dissolved Oxygen (Optical), Turbidity (NTU/FNU/mg/L), Conductivity, Salinity, TDS |
| Communication Protocols | Modbus RS-485, SDI-12 |
| Sensor Architecture | Integrated preamplification |
| Enclosure Material | EPDM, PVC, Stainless Steel |
| Pressure Rating | 5 bar |
| IP Rating | IP68 |
| Dimensions (L × Ø) | 394 mm (incl. hook) × 75 mm |
| Weight | 1300 g |
| Compliance | ASTM D888–05 (DO), ISO 7027 (Turbidity), C4E 4-electrode conductivity technology |
| Brand | Aquaread |
|---|---|
| Origin | United Kingdom |
| Model | AP-2000-AM |
| Instrument Type | Portable/Handheld Multi-Parameter Water Quality Analyzer |
| Dimensions (W×H×D) | 90×180×39 mm |
| Weight (incl. battery) | 450 g |
| Display | Backlit 80-character LCD |
| Memory Capacity | 1,900 data points |
| GPS | Built-in 12-channel antenna, ±10 m accuracy |
| Barometric Pressure Range | 150–1,150 mbar (±1 mbar) |
| Interface | RS-485/RS-232 |
| Power Supply | Replaceable internal battery |
| Operating Temperature | −20 to +70 °C |
| IP Rating | IP67 |
| DO | 0–500 % / 0–50.00 mg/L (res: 0.1 % / 0.01 mg/L |
| acc | ±0.01 mg/L) |
| Conductivity | 0–200 mS/cm (res: 0.1 µS/cm |
| acc | ±0.5 % of reading) |
| TDS | 0–100,000 mg/L (two auto-ranging scales |
| acc | ±1 % of reading or ±0.1 unit, whichever is greater) |
| Resistivity | 5 Ω·cm – 1 MΩ·cm (two auto-ranging scales |
| acc | ±1 % of reading or ±0.1 unit) |
| Salinity | 0–70 PSU (res: 0.01 PSU |
| acc | ±1 % of reading or ±0.1 unit) |
| Seawater Density (σt) | 0–50 σt (res: 0.1 σt |
| acc | ±1.0 σt) |
| ORP | ±2000 mV (res: 0.1 mV |
| acc | ±0.5 mV) |
| Depth | 0–30 m (res: 0.01 m |
| acc | ±0.1 m) |
| Temperature | −5 to +50 °C (res: 0.1 °C |
| acc | ±0.5 °C) |
| pH | 0–14 pH (res: 0.01 pH |
| acc | ±0.01 pH) |
| Ammonium (NH₄⁺/NH₃-N) | 0–1,000 mg/L as N (two auto-ranging scales |
| acc | ±10 %) |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP-2000-NH |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Sensor Measurement Range | 0–1,000 mg/L NO₃⁻ (as N or as NO₃, context-dependent) |
| Resolution | 0.01 mg/L (0–99.99 mg/L), 0.1 mg/L (100.0–999.9 mg/L) |
| Accuracy | ±10% of reading |
| Sensor Housing Dimensions | Ø24 mm × 250 mm |
| Aquameter Display Unit Dimensions | 90 × 180 × 39 mm |
| Aquameter Weight (with batteries) | 450 g |
| Display | Backlit 80-character LCD |
| Data Storage Capacity | 1,900 measurements |
| Integrated GPS | 12-channel receiver, ±10 m horizontal accuracy |
| Barometric Pressure Sensor Range | 150–1,150 mbar, resolution ±1 mbar |
| Power Supply | 5 × AA alkaline or Ni-MH rechargeable batteries |
| Operating Temperature | −20 °C to +70 °C |
| Enclosure Rating | IP67 |
| Brand | Aquaread |
|---|---|
| Origin | United Kingdom |
| Model | AP-7000 |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| GPS Accuracy | ±10 m |
| Operating Temperature | -20 to +70 °C |
| Protection Rating | IP67 |
| Display | Backlit 80-character LCD |
| Data Storage | 1900 measurements |
| Power Supply | Replaceable internal batteries |
| Communication Interface | RS-485/RS-232 |
| Barometric Pressure Range | 150–1150 mbar (±1 mbar) |
| Dissolved Oxygen | 0–500 % saturation / 0–50.00 mg/L (±0.01 mg/L) |
| Conductivity | 0–200 mS/cm (±0.5 % of reading) |
| TDS | 0–100,000 mg/L (±1 % of reading or ±0.1 unit, whichever is greater) |
| Resistivity | 5 Ω·cm – 1 MΩ·cm (±1 % of reading or ±0.1 unit, whichever is greater) |
| Salinity | 0–70 PSU (±1 % of reading or ±0.1 PSU, whichever is greater) |
| Seawater Density (σt) | 0–50 σt (±1.0 σt) |
| ORP | ±2000 mV (±0.5 mV) |
| Depth | 0–30 m (±0.1 m) |
| Temperature | -5 to +50 °C (±0.5 °C) |
| pH | 0–14 pH (±0.01 pH) |
| Optional ISE Sensors | Ammonium, Nitrate, Chloride, Fluoride, Calcium (0–1000 mg/L, ±10 %) |
| Optional Optical Sensors | Chlorophyll-a, Phycocyanin (freshwater/marine), Rhodamine WT, Fluorescein, Hydrocarbon Oil, Turbidity (0–3000 NTU, ±2 %) |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP-7000 |
| Instrument Type | Online Water Quality Analyzer |
| Detection Capability | Multi-Parameter |
| IP Rating | IP68 |
| Operating Temperature | −5 °C to +50 °C |
| Submersion Depth | 150 mm (min) to 100 m (max) |
| Dimensions (L × Ø) | 450 mm × 77 mm |
| Weight (excl. cable) | 1350 g |
| Sensor Interfaces | 7 optical sensor ports (standard: DO, pH, ORP, EC, depth, temperature) + 6 configurable ISE/optical sensor inputs |
| Communication Options | SDI-12, Modbus RTU (RS-485), analog outputs (4–20 mA), Bluetooth, USB, GPS-enabled handheld interface |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP-800 |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Sensor IP Rating | IP68 |
| Aquameter Display Unit IP Rating | IP67 |
| Cable Length | 3 m |
| Key Measured Parameters | pH, ORP, Electrical Conductivity (EC), Dissolved Oxygen (DO), Temperature, Turbidity (AP-800 only) |
| Brand | Aquaread |
|---|---|
| Origin | United Kingdom |
| Model | AP-800 |
| Instrument Type | Portable / Handheld Water Quality Analyzer |
| Enclosure Rating | IP68 (sensor), IP67 (Aquameter display unit) |
| Construction | Marine-grade anodized aluminum housing |
| Sensor Parameters | pH, ORP, Electrical Conductivity (EC), Dissolved Oxygen (DO), Temperature, Turbidity (optional probe) |
| Derived Parameters | Total Dissolved Solids (TDS), Salinity, Specific Conductance, Resistivity (calculated from EC and temperature) |
| Compliance | CE, RoHS, UKCA |
| Software | AquaLink v5.x (Windows/macOS compatible, supports GLP-compliant data export) |
| Brand | Aquaread |
|---|---|
| Origin | United Kingdom |
| Model | AP-800(2) |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Enclosure Rating | IP68 (sensor), IP67 (Aquameter display unit) |
| Construction | Marine-grade anodized aluminum housing |
| Cable Length | 3 m (replaceable) |
| Measured Parameters | pH, ORP, Conductivity, Dissolved Oxygen (DO), Temperature, Turbidity (AP-800 only) |
| Compliance | CE, RoHS, UKCA |
| Software | AquaLink v5.x (Windows/macOS) with GLP-compliant data logging and audit trail |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP-LITE-BGAPE |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Sensor Principle | In-situ Phycocyanin Fluorescence Detection |
| Measurement Range | 0–200,000 cells/mL |
| Resolution | 1 cell/mL |
| Repeatability | ±2% of reading |
| Probe Dimensions | Ø24 mm × 250 mm |
| Aquameter Dimensions | 90 × 180 × 39 mm |
| Aquameter Weight (with batteries) | 450 g |
| Display | Backlit 80-character LCD |
| Data Storage | 1900 samples |
| GPS | Built-in 12-channel antenna, accuracy ±10 m |
| Barometric Pressure Range | 150–1150 mbar (±1 mbar) |
| Power Supply | 5× AA alkaline or Ni-MH rechargeable batteries |
| Operating Temperature | −20 to +70 °C |
| Enclosure Rating | IP67 |
| Interchangeable Sensor Platform | Yes (supports turbidity, chlorophyll-a, phycocyanin, phycoerythrin, rhodamine WT, hydrocarbons, CDOM) |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP-LITE-BGAPE1 |
| Instrument Type | Portable/Handheld Water Quality Analyzer |
| Sensor Principle | Allophycocyanin (APC)-Specific Fluorescence Detection |
| Measurement Range | 0–200,000 cells/mL |
| Resolution | 1 cell/mL |
| Repeatability | ±2% of reading |
| Sensor Housing Dimensions | Ø24 mm × 250 mm |
| Aquameter Display Unit | 90 × 180 × 39 mm, 450 g (with batteries), Backlit 80-character LCD, 1900-data memory, Built-in 12-channel GPS (±10 m accuracy), Barometric Pressure Sensor (150–1150 mbar, ±1 mbar), IP67-rated, Operating Temperature: −20 to +70 °C |
| Power | 5×AA alkaline or Ni-MH rechargeable batteries |
| Interchangeable Sensor Platform | Supports APC, Chlorophyll-a, Phycocyanin (PC), Turbidity, Rhodamine WT, CDOM, and Hydrocarbon optical sensors |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | AP7000-2 |
| Instrument Type | Online Multi-Parameter Water Quality Analyzer |
| Sensor Capacity | Up to 12 sensors (6 standard + 6 expandable ISE/optical interfaces) |
| Power | Rechargeable internal battery (7-day continuous operation) |
| Data Storage | 8 GB embedded memory |
| Communication | USB, RS-232, SDI-12, GSM/GPRS for SMS alerts |
| IP Rating | IP68 (1 m submersion, 30 min) |
| Housing Material | Marine-grade aluminum alloy |
| GPS Integration | Yes (via Aquameter handheld controller) |
| Compliance | Designed for ASTM D1129, ISO 5667, US EPA 40 CFR Part 136, and GLP-compliant data logging |
| Brand | AQUAREAD |
|---|---|
| Country of Origin | United Kingdom |
| Model | AP7000SDI |
| Instrument Type | Online Multi-Parameter Water Quality Analyzer |
| Sensor Capacity | Up to 12 sensors (6 standard + 6 expandable ISE/optical ports) |
| Power | Rechargeable internal battery (7-day continuous operation) |
| Data Storage | 8 GB embedded memory |
| Connectivity | SDI-12, RS-232, USB, Bluetooth, GSM/GPRS for remote alerts |
| IP Rating | IP68 (1 m submersion for 30 min) |
| Housing Material | Marine-grade aluminum alloy |
| GPS Integration | Built-in (via Aquameter handheld controller) |
| Compliance | Designed for ASTM D3370, ISO 5667, US EPA Method 160.1, and GLP-compliant data logging |
| Brand | AQUAREAD |
|---|---|
| Origin | United Kingdom |
| Model | Aquasonde-2000 / Aquasonde-5000 / Aquasonde-7000 |
| Detection Parameters | Dissolved Oxygen (DO), Conductivity (Relative & Absolute), pH, ORP, TDS, Temperature, Salinity, Depth, Resistivity, Specific Conductance (SSG) |
| Ingress Protection | IP68 |
| Depth Range | 0.075–100 m (profiling), 0–30 m (long-term submersion) |
| Operating Temperature | −5 °C to +70 °C |
| Data Storage Capacity | 150,000 full datasets |
| Battery Life | Up to 180 days (model- and configuration-dependent) |
| Sampling Frequency | Programmable from 0.5 Hz to once per 120 hours |
| Sensor Interfaces | 2 (AS-2000), 4 (AS-5000), 6 (AS-7000) |
| Auto-Cleaning System | Integrated only on AS-7000 |
| Brand | AVVOR |
|---|---|
| Origin | Canada |
| Model | AVVOR 8000 (Portable) & AVVOR 9000 (Online) |
| Detection Principle | Anodic Stripping Voltammetry (ASV) |
| Compliance | US EPA Methods 7063, 7472, 1001 |
| Electrode Options | Gold, Mercury-film, Bismuth-film, Bare Carbon |
| Measurable Elements (8000) | Cu, Pb, Zn, Cd, Mn, Sb, Tl, Fe, Ni, As, Hg, Se, Co, Mo, Au, Ag, Cr, Pd, Sn |
| Measurable Elements (9000) | Cu, Pb, Zn, Cd, Mn, Sb, Sb³⁺, Tl, Fe, Ni, As, Hg, Se, Cr, Cr⁶⁺, Co, Mo, Au, Ag, Pd, U |
| Detection Limit | Sub-ppb (ng/L) range for most metals |
| Output Interfaces | Dual 4–20 mA analog outputs (9000), RS-232/RS-485, optional wireless telemetry |
| Software | PC-based control & data logging with audit trail, GLP-compliant reporting |
| Enclosure Rating | IP67 (8000), NEMA 4X / IP66 (9000) |
| Power | Rechargeable Li-ion battery (8000) |
| Brand | AVVOR |
|---|---|
| Origin | Canada |
| Model | AVVOR 8000 |
| Detection Principle | Anodic Stripping Voltammetry (ASV) / Differential Pulse Anodic Stripping Voltammetry (DP-ASV) |
| Measurable Elements | Cu, Pb, Zn, Cd, Mn, Sb, Tl, Fe, Ni, As, Hg, Se, Co, Mo, Au, Ag, Cr, Pd, Sn |
| Detection Range | Sub-ppb to low ppm (element-dependent) |
| Portability | Field-deployable with integrated battery and rugged IP67-rated enclosure |
| Compliance | US EPA Methods 7063, 7472, 1001 |