- All
- Favorite
- Popular
- Most rated
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FTBSL6 |
| Pricing | Available Upon Request |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBSL25 |
| Heating Power | 6000 W |
| Working Chamber Dimensions | 7.3 in (185 mm) diameter × 15 in (381 mm) height × 25 in (635 mm) depth |
| Temperature Range | Ambient to 700 °C (typical operational limit for aluminum oxide media) |
| Stability | ±0.5 °C over full chamber volume at steady state |
| Uniformity | ±1.5 °C across working zone |
| Air Supply Requirement | Clean, dry air at 50 PSI, max. 3.5 CFM |
| Electrical Input | 240 VAC, 50/60 Hz, 30 A |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ATS1041 |
| Pricing | Available Upon Request |
| Dimensions | 21.5" W × 20" L × 18" H (54.6 cm × 50.8 cm × 45.7 cm) |
| Weight | 30 lbs (13.6 kg) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DCU1 |
| Instrument Type | Filter-Based Air Purifier |
| Dimensions (W×D×H) | 14 in × 13 in × 18 in |
| Fan Performance | 210 CFM @ 19 in H₂O static pressure |
| Noise Level | ≤59 dB(A) at medium speed |
| Power Supply | 120/240 VAC, 50/60 Hz, 12 A (120 V) or 8 A (240 V) |
| Filter Configuration | Polyester pre-filter + 99% efficient @ 1.0 µm main filter |
| Enclosure | Powder-coated steel with acoustic damping structure |
| Weight | 44 lbs |
| Standard Accessories | 2" OD inlet duct, 5-ft dual-wall smooth-bore rubber hose with clamps, swivel casters, 7.5-ft power cord, remote 24 VDC start interface, operation manual |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBLL12 |
| Power Supply | 220–240 VAC, 50/60 Hz, 20 A |
| Max Heating Capacity | 6800 W |
| Operating Temperature Range | Ambient to 600 °C (1112 °F) |
| Fluidization Air Requirement | Clean, dry air at 50 PSI, up to 8.0 CFM |
| Safety Cut-off | Independent overtemperature protection at 615 °C (1140 °F) |
| Control System | Quad-zone PID temperature controller with RS485 interface |
| Chamber Dimensions | Ø312 mm × 660 mm (12.3″ × 26″) |
| Compliance | CE-certified |
| Included | Al₂O₃ fluidization medium, operator manual |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FTBLL47 |
| Pricing | Upon Request |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBLL27 |
| Power Rating | 18 kW |
| Operating Temperature Range | Up to 610 °C |
| Fluidization Air Pressure | 70 PSI (4.8 bar) |
| Air Flow Rate | 15 CFM (425 L/min) |
| Electrical Supply | 480 V / 380 V AC, 50/60 Hz, 3-phase, Star Connection |
| Basket Diameter | 15.8 in (401 mm) |
| Basket Depth | 47 in (1194 mm) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATS1026 |
| Pricing | Available Upon Request |
| [Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBLL26 |
| Power Supply | 220–240 VAC, 50/60 Hz, 30 A |
| Max Heating Capacity | 6800 W |
| Operating Temperature Range | Ambient to 1140 °F (615 °C) |
| Fluidization Air Requirement | Clean, dry air at 50 PSI, up to 8.0 CFM |
| Safety | Dual-fuse protection, independent overtemperature cutoff at 1140 °F, CE certified |
| Control System | Four-zone PID temperature controller with RS485 PC interface |
| Air Flow Control | Fully automated 4-stage fluidization air regulation |
| Internal Chamber Dimensions | Up to 12.3 in (312 mm) diameter × 26 in (660 mm) depth |
| Included | Alumina fluidization medium, operator manual] |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FTBLL12W |
| Pricing | Available Upon Request |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ECU2 |
| Instrument Type | Filter-Based Air Purification System |
| Dimensions (W×D×H) | 24 in × 35 in × 52 in |
| Fan Capacity | 750 CFM |
| Noise Level | 60 dBA |
| Power Supply | 220 V AC, 3-Phase, 50/60 Hz, 1100 W per Phase |
| Remote Control Interface | 24 V DC Start/Stop |
| Filter Configuration | Pre-filter (99% @ 1 µm), HEPA Filter (99.97% @ 0.3 µm), Dual Activated Carbon Modules (40 lbs each) |
| VOC Sensor Calibration | Ethanol at 600 ppm |
| Weight (Net) | 490 lbs |
| Weight (Shipping) | 590 lbs |
| Mobility | Industrial Swivel Casters (2 with Lock) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBSL15 |
| Heating Power | 4000 W |
| Chamber Dimensions | 7.3 in (185 mm) dia × 15 in (381 mm) depth |
| Operating Temperature Range | Ambient to 650 °C |
| Temperature Uniformity | ±0.5 °C across working zone |
| Stability | ±0.2 °C at setpoint |
| Air Supply Requirement | Clean, dry air at 50 PSI, max 3.5 CFM |
| Electrical Input | 240 VAC, 50/60 Hz, 20 A |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATS2017 |
| Price | Upon Request |
| Cyclone Height | 14 in (35 cm) |
| Cyclone Diameter | 8 in (20 cm) |
| Cyclone Weight | 4 lb (1.8 kg) |
| Inlet/Outlet OD | 2 in (5 cm) |
| Filtration Efficiency | 95–99% (at 250–350 CFM) |
| Collection Vessel Diameter | 15 in (37.5 cm) |
| Collection Vessel Height | 18 in (45 cm) |
| Collection Vessel Weight | 8 lb (3.6 kg) |
| Max Operating Temperature | 250 °F (121 °C) |
| Particle Capture Threshold | ≥325 mesh (≤44 µm) |
| Brand | Selecta |
|---|---|
| Origin | Spain |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Microprinter |
| Price Range | USD 0 – 15,000 |
| Power Supply | DC 5 V, 3 A |
| Dimensions (H×W×D) | 4.1 × 12.0 × 13.4 cm |
| Weight | 1.0 kg |
| Print Media Width | 56 mm (2.25 in) |
| Interface | RS-232 |
| Printing Technology | Non-thermal inkjet |
| Compatible Devices | pH meters, conductivity meters, spectrophotometers, data loggers, and other lab instruments requiring real-time hardcopy output |
| Brand | Harry Gestigkeit |
|---|---|
| Origin | Germany |
| Model | SVD95/P |
| Power | 2500 W |
| Voltage | 220 V |
| External Dimensions | 450 × 310 × 180 mm |
| Maximum Temperature | 950 °C |
| Heating Time (RT → 950 °C) | < 5 min |
| Crucible Capacity | 8 × Ø34 mm or up to 4 × Ø50 mm |
| Ashing Bed Length | 400 mm |
| Timer Range | 0–120 min with audible alarm |
| Safety Interlock | Lid-activated power cutoff |
| Construction Material | Grade G stainless steel |
| Compliance | CE-marked, designed for ISO 562 / ASTM D3174 / AOAC 942.05 ash content determination |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | ECU1 |
| Instrument Type | Filter-Based Air Purification System |
| Dimensions (W×D×H) | 23 in × 23 in × 35.5 in |
| Fan Performance | 210 CFM @ 19" w.c. |
| Noise Level | 59 dBA (at full speed) |
| Power Input | 120/240 V AC, 50/60 Hz, 15 A (120 V) or 8 A (240 V) |
| Pre-Filter Efficiency | 99% @ 1 µm |
| HEPA Filter Efficiency | 99.97% @ 0.3 µm |
| Activated Carbon Capacity | Two 30-lb modules |
| VOC Sensor | Calibrated electronic sensor with real-time display feedback |
| Remote Control Interface | 24 V DC start/stop |
| Weight (incl. filters) | 210 lbs |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATS1032 |
| Price | Upon Request |
| Height | 23 in (57.5 cm) |
| Diameter | 19.5 in (49 cm) |
| Width | 18 in (45 cm) |
| Weight | 20 lb (9 kg) |
| Inlet OD | 5 in (12.5 cm) |
| Outlet OD | 6 in (15 cm) |
| Operating Temperature | up to 250°F (121°C) |
| Collection Efficiency | 90–95% for 120-mesh Al₂O₃ |
| Recommended Airflow | 250–350 CFM |
| Drum Dimensions | Ø19 in × 18 in (Ø47.5 cm × 45 cm) |
| Finish | Powder-Coated Steel |
Show next