Eppendorf CryoCube F570 Series Ultra-Low Temperature Freezer

Overview

The Eppendorf CryoCube F570 Series is an upright ultra-low temperature (ULT) freezer engineered for reliable, energy-efficient long-term storage of biological samples at –80 °C. Designed specifically for high-throughput laboratory environments—where doors are opened multiple times per day—the system employs a robust two-stage cascade refrigeration architecture with hydrocarbon-based refrigerants (R170 and R290), delivering rapid temperature recovery after door openings while maintaining thermal stability within ±2 °C across the entire chamber. Its structural integrity, combined with advanced insulation technologies—including 130 mm-thick walls incorporating environmentally responsible polyurethane foam and optional vacuum insulated panels (VIPs) in the F570h and F570hw variants—ensures minimal heat ingress and consistent cold chain continuity. This makes the CryoCube F570 suitable for critical applications requiring compliance with ISO 13485, GLP, and GMP-aligned sample integrity protocols.

Key Features

• 570 L usable capacity accommodating up to 400 standard 2-inch cryoboxes (40,000 cryovials) with optimized vertical access
• Five independently sealed internal compartments with insulated inner doors to minimize cross-compartment thermal disturbance during routine sample retrieval
• Reinforced stainless-steel interior chamber resistant to corrosion, abrasion, and repeated chemical decontamination cycles
• Ergonomically positioned control panel at eye level for intuitive parameter monitoring and adjustment without stooping or stretching
• Integrated automatic vacuum release valve enabling immediate door re-opening after closure—eliminating wait time caused by pressure differentials
• Redesigned dual-grip door handle with integrated locking provision for optional padlock attachment, supporting physical access control requirements
• Removable dust filter on condenser intake for simplified preventive maintenance and sustained cooling performance
• Energy-optimized design certified under EU Energy Label Class A+, contributing to reduced operational cost and carbon footprint over device lifetime

Sample Compatibility & Compliance

The CryoCube F570 supports storage of diverse biospecimens including primary cell cultures, stem cells, plasma, serum, DNA/RNA extracts, tissue sections, and microbial stocks—all under stable –80 °C conditions validated per ICH Q5C and USP guidelines for cold chain management. Its construction adheres to IEC 61010-1 safety standards for laboratory equipment, and its refrigerant selection (R170/R290) complies with F-Gas Regulation (EU) No 517/2014 and Montreal Protocol phase-down schedules. The stainless-steel interior meets FDA-recommended surface finish criteria (Ra ≤ 0.8 µm) for cleanability and bioburden control. Optional data logging modules support 21 CFR Part 11-compliant audit trails when integrated with Eppendorf’s CryoCloud software platform.

Software & Data Management

While the base CryoCube F570 operates via an embedded microprocessor controller with LED display, optional connectivity enables integration into centralized lab infrastructure. Through RS485 or Ethernet interfaces (available on F570hw and F570h configurations), users can remotely monitor real-time temperature, compressor status, door-open duration, and alarm history via Eppendorf’s CryoCloud web-based dashboard. Alarm notifications—including deviations exceeding ±3 °C, power failure, or condenser blockage—are configurable via email or SNMP traps. All logged data is timestamped, user-attributed, and stored with immutable audit trail functionality compliant with ALCOA+ principles for regulated environments.

Applications

• Biobanking operations requiring ISO 20387-compliant specimen preservation
• Preclinical research laboratories managing longitudinal cohorts of frozen biosamples
• QC/QA labs storing reference standards and calibration materials at defined thermal setpoints
• Vaccine development workflows involving ultra-cold intermediate storage prior to lyophilization or formulation
• Academic core facilities supporting multi-user access with role-based security and usage tracking
• Contract research organizations (CROs) fulfilling client-specific cold storage SOPs and inspection readiness criteria

FAQ

What is the typical temperature recovery time after a 30-second door opening?
Under standard ambient conditions (22 °C, 50% RH), the CryoCube F570 achieves full recovery to –80 °C within ≤12 minutes following a single 30-second door event.
Is remote monitoring capability built-in or requires add-on hardware?
Remote monitoring is optional and requires either the integrated Ethernet module (F570hw/F570h) or external RS485-to-Ethernet gateway; base F570n models support local display only.
Can the unit be installed in non-air-conditioned rooms?
Ambient operating range is specified as 10–30 °C; installation outside this range may compromise compressor lifespan and temperature uniformity.
Are VIP insulation panels available for field retrofitting?
Vacuum insulated panels are factory-integrated only in F570h and F570hw configurations and cannot be retrofitted post-purchase.
Does the freezer support validation documentation packages for IQ/OQ/PQ?
Yes—Eppendorf provides comprehensive validation templates, calibration certificates, and installation qualification checklists upon request for GxP-regulated deployments.