whYOKO YOKO-TF Manual Thin-Layer Coater
| Brand | whYOKO |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YOKO-TF |
| Instrument Category | TLC Ancillary Equipment |
| Operation Mode | Manual |
| Coating Width Options | 10 cm (TF-I), 20 cm (TF-II), Dual 10/20 cm (TF-III) |
| Adjustable Layer Thickness | 0.02–2 mm |
| Frame Material | Anodized Aluminum with Epoxy Coating |
| Compatible Plate Sizes | 5×10, 10×10, 20×10, 5×20, 10×20, 20×20 cm |
Overview
The whYOKO YOKO-TF Manual Thin-Layer Coater is a precision-engineered laboratory tool designed for the reproducible, hands-on preparation of uniform silica gel or alumina thin-layer chromatography (TLC) plates. Unlike automated coaters, this instrument operates on the principle of controlled gravitational flow and mechanical shear—where slurry is evenly distributed across a glass substrate via a calibrated gap between the adjustable coating frame and plate surface. Its design prioritizes consistency in layer thickness, edge definition, and surface homogeneity—critical parameters influencing Rf value reproducibility, spot resolution, and quantitative densitometric analysis. The YOKO-TF serves laboratories engaged in method development, quality control of raw materials, stability-indicating assays, and preparative TLC workflows where batch-to-batch plate uniformity directly impacts analytical validity.
Key Features
- Three modular configurations (TF-I, TF-II, TF-III) to support diverse plate dimensions without requiring multiple dedicated instruments
- Precision-machined anodized aluminum frame with epoxy-polymer coating ensures long-term dimensional stability, corrosion resistance, and non-reactive contact with aqueous and organic slurries
- Continuously adjustable coating gap (0.02–2 mm) calibrated via micrometer-style locking screws—enabling optimization for standard analytical layers (0.1–0.25 mm) or thicker preparative layers (≥0.5 mm)
- Dual-frame compatibility in TF-III model allows rapid switching between 10 cm and 20 cm coating widths on a single base plate, minimizing setup time and workspace footprint
- Non-slip rubber feet and low-center-of-gravity base provide operational stability during manual draw-down; compatible with standard microscope slides, precut glass plates (e.g., 20×20 cm), and custom-cut substrates
Sample Compatibility & Compliance
The YOKO-TF accommodates common TLC stationary phases—including silica gel 60 F254, aluminum oxide, cellulose, and reversed-phase C18 slurries—in both aqueous and solvent-based suspensions (e.g., chloroform/methanol, ethyl acetate/hexane). It supports adherence to established chromatographic practice guidelines outlined in USP , EP 2.2.27, and ISO 17025-accredited environments where documented plate preparation procedures are required. While the coater itself does not generate electronic records, its mechanical repeatability supports GLP-compliant documentation when paired with standardized operating procedures (SOPs) specifying slurry viscosity, ambient temperature/humidity controls, drying protocols, and activation conditions.
Software & Data Management
As a fully manual, non-electronic device, the YOKO-TF does not incorporate embedded firmware, connectivity interfaces, or data logging capabilities. This architecture eliminates software validation requirements under FDA 21 CFR Part 11 and simplifies qualification protocols (IQ/OQ/PQ) for regulated laboratories. Users maintain full traceability through paper-based or LIMS-integrated batch records documenting frame setting (gap width), plate dimensions, slurry lot number, coating date/time, and operator ID—aligning with ALCOA+ principles (Attributable, Legible, Contemporaneous, Original, Accurate, Complete, Consistent, Enduring, Available).
Applications
- Routine preparation of analytical TLC plates for identity testing of pharmaceutical actives, excipients, and degradation products
- Method scouting and optimization in natural product isolation, where variable layer thickness affects separation selectivity and loading capacity
- Preparative TLC plate fabrication for milligram-scale compound purification prior to NMR or MS characterization
- Teaching laboratories requiring robust, intuitive tools for demonstrating chromatographic fundamentals—capillary action, polarity-driven migration, and visualization techniques
- QC labs performing compendial tests per Ph. Eur. or JP monographs that specify manual plate preparation as part of validated procedures
FAQ
Is the YOKO-TF compatible with pre-coated glass plates requiring re-slurrying?
Yes—the coater is designed for slurry-based application onto clean, uncoated glass substrates; it is not intended for recoating commercially pre-coated plates.
Can the coating gap be verified with traceable metrology tools?
Yes—each adjustable gap setting can be independently confirmed using certified gauge blocks or digital micrometers compliant with ISO 3650, supporting calibration verification per ISO/IEC 17025 Clause 6.5.
Does the frame require cleaning between different stationary phases?
Yes—residue cross-contamination must be prevented by thorough rinsing with appropriate solvents (e.g., acetone followed by methanol) and air-drying before switching between silica gel, alumina, or cellulose slurries.
What is the expected service life under daily laboratory use?
With proper handling and avoidance of abrasive cleaning agents, the anodized aluminum frame maintains structural integrity and dimensional accuracy for ≥10 years, as validated through accelerated wear testing per ASTM D3359.
Are replacement coating frames available for individual purchase?
Yes—TF-I (10 cm), TF-II (20 cm), and dual-frame kits are stocked separately, enabling flexible configuration upgrades without full system replacement.
