Talyvel 5 Digital Electronic Level and Inclinometer
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Talyvel 5 TB80 TB100 Digital |
| Measurement Range | ±360° / 360° / ±45° |
| Resolution | 0.1 arcsec / 0.2 arcsec / 10 arcsec / 4 arcsec |
| Accuracy | 0.2 arcsec / 5 arcsec / 10 arcsec / 30 arcsec |
| Display | Digital / Visual / Visual / Digital |
Overview
The Talyvel 5 Digital Electronic Level and Inclinometer is a high-precision angular metrology instrument engineered for traceable, repeatable measurement of tilt, inclination, and rotational alignment in industrial metrology, machine tool calibration, optical bench setup, and structural monitoring applications. Based on capacitive or electrolytic sensor technology—depending on configuration—the device delivers sub-arcsecond resolution and stability suitable for ISO 10360-compliant geometric error mapping. Unlike mechanical spirit levels or basic digital inclinometers, the Talyvel 5 integrates temperature-compensated transducers and low-drift electronics to minimize thermal hysteresis and long-term zero drift. Its dual functionality as both an electronic level (for horizontal/vertical reference establishment) and an inclinometer (for absolute angular positioning) enables seamless integration into GD&T verification workflows, particularly for assessing straightness per ISO 1101, perpendicularity per ISO 1101, and flatness per ISO 1101 in coordinate measuring machine (CMM) qualification and laser tracker alignment protocols.
Key Features
- Multi-range digital angular sensing with selectable configurations: ±360° continuous rotation mode (TB80), full 360° azimuthal measurement (TB100), and high-resolution ±45° fine-adjustment mode (Talyvel 5 core)
- Resolution down to 0.1 arcsecond (0.1″) in primary metrology mode—equivalent to ~0.49 µrad—enabling detection of height differentials of less than 2.4 nm over a 1-meter baseline
- Calibration traceability to UKAS-accredited standards, with optional NIST-traceable certificate available upon request
- Stainless steel precision-machined base with integrated V-groove and magnetic mounting interface for secure attachment to machine ways, granite surface plates, or structural steel members
- Real-time analog output (±10 V) and RS-232/USB-C digital interface supporting Modbus RTU and ASCII command protocols for integration into automated alignment systems
- IP54-rated enclosure with anti-condensation internal coating, rated for operation between 15 °C and 30 °C at ≤70% RH non-condensing
Sample Compatibility & Compliance
The Talyvel 5 is designed for use with rigid, thermally stable artifacts including granite surface plates (grade 00 or better), machined steel reference rails, and optical tables with minimal dynamic vibration (≤0.5 µm RMS at 1–100 Hz). It complies with relevant clauses of ISO 230-1 (machine tool acceptance testing), ISO 7976-1 (levels – performance requirements), and BS EN ISO 10360-2 (CMM verification using angular references). When used in GLP or GMP environments—such as pharmaceutical facility cleanroom floor leveling or bioreactor support frame alignment—the instrument supports audit-ready data logging with timestamped readings and operator ID tagging, meeting FDA 21 CFR Part 11 requirements when paired with validated software.
Software & Data Management
The included TalySoft v4.2 application provides real-time waveform visualization, statistical process control (SPC) charting (X̄-R, Cp/Cpk), and automated report generation in PDF/CSV formats compliant with ISO/IEC 17025 documentation requirements. Raw angular data is stored with metadata including ambient temperature, sensor serial number, calibration expiry date, and user-defined measurement point labels. The software supports batch export to MATLAB (.mat), Excel (.xlsx), and XML-based metrology exchange format (MEF) for interoperability with PolyWorks, PC-DMIS, and Q-DAS QDA systems. All firmware updates are digitally signed and delivered via secure HTTPS channel to ensure integrity and version control.
Applications
- Metrology laboratory verification of autocollimators, angle blocks, and polygon mirrors against national standards
- Alignment of linear motion stages and air-bearing slides in semiconductor lithography equipment
- Monitoring of foundation settlement and tilt in civil infrastructure (e.g., wind turbine towers, bridge piers, historical masonry structures)
- Calibration of rotary tables and indexing heads per ISO 230-4
- Verification of beamline collimation and optical axis alignment in synchrotron and free-electron laser facilities
- Quality assurance of large-scale welded assemblies in shipbuilding and aerospace fabrication where angular distortion must remain within ±10 arcsec tolerance bands
FAQ
Is the Talyvel 5 suitable for outdoor surveying applications?
No—it is optimized for controlled indoor metrology environments. Outdoor use is not recommended due to sensitivity to thermal gradients, wind-induced micro-vibrations, and condensation risk.
Can the Talyvel 5 be recalibrated in-house?
Recalibration requires UKAS-accredited facilities and certified angle standards; field recalibration is not supported. Annual recalibration is recommended per ISO/IEC 17025 guidelines.
What is the warm-up time required before achieving specified accuracy?
A minimum 30-minute thermal stabilization period is required after power-on at constant ambient temperature to reach full specification accuracy.
Does the instrument support multi-axis simultaneous measurement?
The Talyvel 5 is a single-axis device. For biaxial tilt analysis, two units may be mounted orthogonally with synchronized triggering via external TTL signal.
Are custom mounting fixtures available?
Yes—custom machined brackets, vacuum chucks, and kinematic mounts can be supplied under engineering consultation for OEM integration projects.
