Hydrothermal Carbonization Reactor SK3-2.5-10X
| Brand | Zhuochi |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | General Distributor |
| Product Origin | Domestic |
| Model | SK3-2.5-10X |
| Instrument Type | Tube Furnace |
| Max Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 2.5 kW |
| Heating Rate (to Max Temp) | ≤50 °C/min |
| Heating Method | Resistance Wire Heating |
| Internal Chamber Dimensions | φ80 mm × 380 mm |
| Controller Size | 80 mm × 610 mm |
Overview
The Zhuochi SK3-2.5-10X Hydrothermal Carbonization Reactor is a precision-engineered tube furnace system designed to support controlled, sealed-vessel hydrothermal synthesis under subcritical aqueous conditions. Unlike conventional pyrolysis or gasification, hydrothermal carbonization (HTC) operates in the temperature range of 150–280 °C and pressures up to 276 bar—conditions readily achieved using externally heated pressure-rated reactors coupled with this furnace’s stable thermal envelope. The SK3-2.5-10X provides uniform axial heating across its 380 mm-long, 80 mm-diameter alumina-lined chamber, enabling reproducible thermal profiles essential for HTC kinetics studies, biomass feedstock screening, and scalable process development. Its resistance wire heating architecture delivers rapid ramp rates (≤50 °C/min) and high thermal stability (±1 °C control accuracy), critical for maintaining consistent reaction severity across extended dwell times (4–24 h). This system is not a standalone autoclave but serves as the primary thermal actuator for externally mounted, certified hydrothermal reactors—ensuring compliance with ASME BPVC Section VIII Div. 1 or PED 2014/68/EU pressure vessel standards when integrated appropriately.
Key Features
- Stable 1000 °C maximum operating temperature with ±1 °C digital PID control—validated per ASTM E220 for thermocouple calibration traceability
- Optimized 80 mm internal diameter × 380 mm length chamber geometry, accommodating standard 50–100 mL hydrothermal liners (e.g., Teflon-lined stainless steel or Inconel 625 reactors)
- 2.5 kW rated power output with programmable multi-segment ramp-soak profiles via integrated 80 mm × 610 mm touchscreen controller
- Alumina fiber insulation and double-layer stainless steel housing ensure low external surface temperature (<60 °C at 800 °C internal), meeting IEC 61000-6-3 EMC and ISO 13857 safety clearance requirements
- Front-loading horizontal configuration with spring-loaded door seal and optional inert gas purge port (N₂/Ar) for oxygen-sensitive carbonization protocols
Sample Compatibility & Compliance
The SK3-2.5-10X supports a wide range of biomass-derived precursors—including lignocellulosic waste (e.g., rice husk, sawdust), algae, sewage sludge, and food processing residues—when loaded into compatible pressure-rated reactors. It is routinely deployed in laboratories adhering to GLP-compliant workflows for material characterization (ASTM D3172, ISO 18123), where batch-to-batch reproducibility is enforced through documented calibration logs and audit-ready temperature profiling. While the furnace itself is not pressure-certified, its thermal performance aligns with the operational envelope required by ISO/IEC 17025-accredited labs conducting HTC research under ISO 21930 (Sustainability in buildings) and EU Directive 2009/28/EC on renewable energy sources.
Software & Data Management
The built-in controller supports RS485 Modbus RTU communication for integration with LabVIEW™, MATLAB®, or custom SCADA systems. Temperature setpoints, ramp rates, soak durations, and real-time thermocouple feedback (Type K) are logged at user-defined intervals (1–60 s) and exportable as CSV files. Optional data acquisition modules enable timestamped, password-protected logging compliant with FDA 21 CFR Part 11 requirements—including electronic signatures, audit trails, and user access level management (Admin/Operator/Viewer). All firmware updates are digitally signed and version-tracked to support regulatory inspections.
Applications
- Production of hydrochar with tunable surface oxygen functionality (–COOH, –OH, C=O) for heavy metal adsorption (Pb²⁺, Cd²⁺) per ASTM D4373 and ISO 11269-2
- Synthesis of nanostructured carbon catalysts for oxygen reduction reactions (ORR), leveraging HTC-derived heteroatom doping (N, P, S)
- Development of solid biofuel blends meeting EN 14961-2 specifications for calorific value (≥18 MJ/kg) and ash content (<5 wt%)
- Preparation of functionalized carbon aerogels for supercapacitor electrodes (specific capacitance >200 F/g in 6 M KOH, measured via cyclic voltammetry per IEC 62391-1)
- Accelerated aging studies of carbonaceous materials under simulated geological sequestration conditions (T = 200 °C, P = 150 bar, t = 72 h)
FAQ
Is the SK3-2.5-10X certified for direct use with high-pressure reactors?
No—the furnace provides external heating only; users must supply ASME- or PED-certified pressure vessels rated for ≥300 bar and ≥300 °C.
Can it be used for non-aqueous solvothermal synthesis?
Yes, provided the reactor liner is chemically compatible with organic solvents (e.g., ethanol, ethylene glycol) and pressure-rated accordingly.
What calibration documentation is included?
NIST-traceable temperature verification report (at 200 °C, 500 °C, and 800 °C), controller firmware version log, and electrical safety test certificate (IEC 61010-1).
Does it support inert atmosphere operation?
Yes—via optional front-panel gas inlet valve and flowmeter (0–5 L/min N₂/Ar), with leak-tested chamber integrity verified at 0.1 MPa.
What maintenance is required for long-term thermal stability?
Annual recalibration of the internal thermocouple and inspection of heating element continuity; alumina insulation replacement recommended every 3,000 operational hours at >800 °C.
