SUNS UTM6000 Series Dual-Column Desktop Universal Testing Machine
| Brand | SUNS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Electronic Universal Testing Machine |
| Model | UTM6000 |
| Load Capacity Range | 0.02 N to 600 kN |
| Load Accuracy | ±0.5% |
| Power Supply | 220 V / 50 Hz (±10%) |
| Power Consumption | 400 W |
| Dimensions (W×D×H) | 600 × 465 × 1510 mm |
| Effective Test Width | 345 mm |
| Vertical Test Space (Standard Configuration) | 850 mm (center-to-center distance between upper and lower fixture adapters) |
| Net Weight | ~100 kg |
| Standard Test Zone | Lower Space Configuration |
Overview
The SUNS UTM6000 Series is a dual-column, desktop-mounted electronic universal testing machine engineered for high-reproducibility mechanical characterization of nonmetallic materials under static loading conditions. It operates on the principle of closed-loop servo-controlled force and displacement measurement, where a precision AC servo motor drives a ball-screw transmission system to move the crosshead vertically with programmable speed and position resolution. The system complies with fundamental mechanical test standards including ISO 6892-1 (tensile testing of metallic materials), ASTM D638 (tensile properties of plastics), ASTM D790 (flexural properties), and ISO 178 (flexure of plastics), serving as a foundational platform for routine quality control, R&D validation, and material specification compliance in polymer, composite, elastomer, textile, paper, and biomedical packaging laboratories.
Key Features
- Dual-column rigid frame architecture with preloaded linear guides ensures minimal deflection and high axial alignment stability during high-force testing up to 600 kN (model-dependent configuration).
- High-resolution load cell with ±0.5% full-scale accuracy across the entire dynamic range (0.02 N to 600 kN), traceable to national metrological standards.
- AC servo drive system delivering precise crosshead speed control from 0.001 mm/min to 1000 mm/min, supporting quasi-static and low-speed dynamic protocols.
- Modular fixture interface compatible with standardized wedge-action, pneumatic, hydraulic, and custom-designed grips per ISO 26203 and ASTM E4 requirements.
- Integrated overload protection, emergency stop circuitry, and software-based safety interlocks compliant with EN ISO 13850 and IEC 61508 functional safety principles.
- Compact desktop footprint (600 × 465 × 1510 mm) optimized for space-constrained QC labs while maintaining 850 mm vertical test stroke and 345 mm effective test width.
Sample Compatibility & Compliance
The UTM6000 accommodates specimens ranging from microfilaments (<0.1 mm diameter) to structural composites (up to 300 mm wide × 800 mm long). Its lower-space configuration supports standard tensile bars, flexural beams, peel specimens, tear strips, and compression cylinders per ISO 527, ASTM D3039, ASTM D1876 (T-peel), and ISO 34-1. All hardware and firmware are designed to support GLP/GMP-aligned workflows, with optional audit trail logging, user access levels, and electronic signature capability meeting FDA 21 CFR Part 11 requirements when paired with SUNS TestSuite v5.x software.
Software & Data Management
Control and analysis are performed via SUNS TestSuite — a Windows-based application supporting real-time data acquisition at up to 1 kHz sampling rate, multi-curve overlay, automatic yield point detection (0.2% offset method), modulus calculation (secant/tangent), and fracture energy integration. Raw data exports to CSV, Excel, or XML formats; test reports conform to ISO/IEC 17025 documentation templates. Optional API integration enables LIMS connectivity and automated report generation within enterprise QA systems.
Applications
- Tensile strength and elongation-at-break evaluation of thermoplastics, thermosets, and biodegradable films.
- Compression testing of foams, corrugated board, and rubber compounds per ISO 844 and ASTM D3574.
- Three-point and four-point bending of laminates and fiber-reinforced composites.
- Peel adhesion assessment of pressure-sensitive tapes and medical device packaging per ASTM D903 and ISO 8510-2.
- Tear resistance quantification using trouser, tongue, or Elmendorf methods (with auxiliary fixtures).
- Creep and stress-relaxation profiling under constant load or displacement conditions (requires optional environmental chamber integration).
FAQ
What is the maximum load capacity of the UTM6000 series?
The UTM6000 platform spans multiple sub-models, with standard configurations ranging from 100 N (UTM6102) to 10 kN (UTM6104) for desktop units; higher-capacity variants up to 600 kN are available as floor-standing configurations.
Does the system support ASTM and ISO-compliant test methods out of the box?
Yes — preloaded test templates cover over 40 standardized methods including ASTM D638, D790, D1876, ISO 527, ISO 178, and ISO 6892-1; users may also define custom test profiles with programmable ramp-hold cycles.
Is calibration certification included with delivery?
Each unit ships with a factory calibration certificate traceable to CNAS-accredited reference standards; on-site recalibration services and annual verification packages are available upon request.
Can the UTM6000 be integrated into an automated production line?
With optional digital I/O modules and Modbus TCP/EtherNet/IP protocol support, the system interfaces with PLCs and MES platforms for inline mechanical property verification in Industry 4.0 environments.
