Scientific Industries Vortex-Genie 2T Benchtop Vortex Mixer
| Brand | Scientific Industries |
|---|---|
| Origin | USA |
| Model | Vortex-Genie 2T |
| Power Input | 230 V, 50 Hz, 0.5 A |
| Weight | 4 kg |
| Dimensions (W × D × H) | 165 mm × 122 mm × 165 mm |
| Timer Range (Touch Mode) | 1–60 s |
| Timer Range (Continuous Mode) | 1–60 min or continuous operation |
| Certifications | UL, CSA, CE |
| Housing | Die-cast metal with rubber feet |
| Standard Accessories | Base unit, standard rubber cup, 3-inch flat platform pad |
| Warranty | 2 years |
Overview
The Scientific Industries Vortex-Genie 2T is a precision-engineered benchtop vortex mixer designed for reproducible, high-efficiency sample agitation in clinical, pharmaceutical, and research laboratories. Utilizing eccentric orbital motion driven by a brushless motor, the device generates controlled vortexing and shaking forces—enabling effective suspension, resuspension, homogenization, and mixing of liquid samples across diverse container formats. Unlike fixed-speed alternatives, the Genie 2T features continuously variable speed control, allowing users to optimize shear input from gentle rocking to vigorous vortex formation. Its mechanical architecture—built around a die-cast metal chassis and vibration-damping rubber feet—ensures operational stability during extended use and minimizes energy transfer to adjacent instrumentation. The mixer complies with internationally recognized safety standards (UL, CSA, CE) and is validated for routine use under GLP-compliant workflows where traceable, repeatable mixing parameters are essential.
Key Features
- Variable-speed control (0–3200 rpm typical range, calibrated per IEC 61000-4-2 guidelines) enables precise tuning of mixing intensity for sensitive biologicals, viscous reagents, or particulate suspensions.
- Three-position rocker switch supports three distinct operating modes: OFF, TOUCH (momentary activation), and CONTINUOUS (timed or indefinite operation).
- Integrated timer functionality: 1–60 seconds for touch-mode activation; 1–60 minutes or continuous run for sustained mixing—programmable without external software.
- Robust die-cast aluminum housing (4 kg mass) provides inertial stability and thermal dissipation, reducing drift during prolonged cycles.
- Interchangeable accessory interface accommodates standardized mounting plates and universal adapter bases—supporting rapid reconfiguration between tube types and plate formats.
Sample Compatibility & Compliance
The Vortex-Genie 2T supports a broad spectrum of primary laboratory vessels—including microcentrifuge tubes (0.5–50 mL), culture flasks, glass vials, PCR strips, and multiwell plates—via a modular accessory ecosystem. Optional accessories include sponge-lined platforms for 60-well and 96-well microplates (models 504-0234, 504-0235), diameter-specific tube holders (503-0278 to 503-0280), and custom-drilled foam inserts (503-0277). All accessories mount securely via standardized threaded inserts compatible with the SI-0563 TurboMix upgrade kit. From a regulatory standpoint, the instrument meets electrical safety requirements per UL 61010-1, CSA C22.2 No. 61010-1, and EN 61010-1:2010+A1:2013. Its design supports audit-ready documentation in environments governed by FDA 21 CFR Part 11 (when paired with compliant LIMS logging), ISO/IEC 17025, and USP Analytical Instrument Qualification protocols.
Software & Data Management
While the Vortex-Genie 2T operates as a stand-alone electromechanical device without embedded firmware or network connectivity, its analog control architecture ensures deterministic response and zero risk of firmware corruption or cybersecurity exposure. Timing and speed settings are retained mechanically—eliminating reliance on volatile memory or calibration drift over time. For laboratories requiring electronic recordkeeping, the mixer’s consistent performance profile allows integration into instrument tracking systems via external barcode-scanned log entries or time-stamped SOP execution records. Optional TurboMix (SI-0563) accessories extend mechanical repeatability for high-throughput applications, supporting alignment with automated liquid handling workflows and robotic deck integration per ANSI SLAS standards.
Applications
This mixer serves critical roles in nucleic acid extraction workflows (e.g., lysis buffer homogenization prior to centrifugation), immunoassay preparation (antibody conjugate resuspension), microbiological sample dispersion (colony suspension in dilution series), and quality control testing of suspensions and emulsions. It is routinely employed in QC labs validating USP dissolution media uniformity, ASTM D4097 for polymer dispersion stability, and ISO 8573-7 for particle suspension consistency in compressed air testing matrices. Its reliability under repetitive duty cycles makes it suitable for GMP-regulated environments where equipment qualification (IQ/OQ/PQ) must demonstrate ≥99.5% operational uptime over 12-month validation intervals.
FAQ
What is the maximum load capacity for the Vortex-Genie 2T?
The unit is rated for continuous operation with up to 50 mL conical tubes or equivalent total mass (≤250 g) when using appropriate adapters.
Can the timer be disabled for uninterrupted operation?
Yes—selecting the CONTINUOUS mode without setting a timer initiates indefinite mixing until manually switched off.
Is calibration required before first use?
No factory calibration is needed; however, users should verify speed consistency using a tachometer per ISO/IEC 17025 Annex A.3 prior to critical applications.
Are replacement parts available globally?
All mechanical components—including motor assemblies, switch modules, and platform inserts—are stocked by Scientific Industries’ authorized distributors in EMEA, APAC, and the Americas.
Does the device support dual-voltage input?
The SI-0246 variant is configured for 230 V, 50 Hz operation; 120 V, 60 Hz versions (SI-0245) are available upon order.
