Titan SUC-3 Benchtop Ultrasonic Cleaner
| Brand | Titan |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | SUC-3 |
| Instrument Type | General-purpose |
| Capacity | 3 L |
| Ultrasonic Frequency | 37 kHz |
| Ultrasonic Power Output | 90 W |
| Adjustable Power | No |
| Adjustable Temperature | No |
| Timer Range | 1–99 min |
| Sound-Dampening Lid | Not Included |
| Drain/Inlet Fitting | Not Provided |
Overview
The Titan SUC-3 is a compact, general-purpose benchtop ultrasonic cleaner engineered for routine laboratory cleaning tasks requiring consistent cavitation energy and operational reliability. It operates on the principle of high-frequency acoustic cavitation—where 37 kHz ultrasonic waves generate microscopic implosions in the cleaning liquid, effectively dislodging particulate contaminants, organic residues, and loosely adhered biofilms from immersed surfaces. Designed for stability in shared lab environments, the unit delivers a fixed 90 W power output into its 3-liter stainless steel tank, ensuring reproducible cleaning performance across standard glassware, metal tools, pipette tips, and small instrumentation components. Its solid-state generator and piezoelectric transducer array are integrated into a robust chassis with thermal protection circuitry to prevent coil overheating during extended operation.
Key Features
- Fixed-frequency ultrasonic generation at 37 kHz—optimized for balance between penetration depth and surface cleaning efficiency in aqueous and mild solvent-based solutions.
- 3-liter capacity stainless steel tank (dimensions: approx. 240 × 140 × 100 mm internal), electropolished for corrosion resistance and ease of decontamination.
- Precise digital timer with 1-minute resolution, programmable from 1 to 99 minutes—enabling repeatable process validation for routine QC workflows.
- Integrated overheat protection and automatic shutdown upon timer completion or abnormal current draw.
- Front-panel LED display with clear status indicators for power-on, timer countdown, and fault conditions.
- Compact footprint (approx. 280 × 170 × 160 mm) suitable for fume hoods, laminar flow cabinets, and crowded benchtops without compromising accessibility.
Sample Compatibility & Compliance
The SUC-3 is validated for cleaning non-porous, sonication-compatible materials including borosilicate glass, stainless steel, titanium alloys, and anodized aluminum. It is not recommended for use with delicate optics, soft polymers (e.g., PDMS, PET films), or components containing glued or soldered joints unless prior compatibility testing is performed. While the unit itself carries no CE, UL, or IEC 61010 certification, its electrical design complies with basic safety requirements for Class I laboratory equipment per GB 4793.1–2007 (Chinese national standard equivalent to IEC 61010-1). For GLP/GMP-regulated environments, users must establish and document SOPs covering load configuration, solution composition, cycle duration, and post-cleaning verification (e.g., residue testing per USP or visual inspection under controlled lighting).
Software & Data Management
The SUC-3 operates as a standalone hardware device with no embedded microcontroller-based software, network interface, or data logging capability. All operational parameters are set manually via physical controls; no firmware updates, remote monitoring, or audit trail functionality is provided. Consequently, it meets minimal regulatory requirements for non-critical cleaning steps where electronic recordkeeping is not mandated. Laboratories requiring 21 CFR Part 11 compliance or electronic batch records must implement external documentation systems—such as LIMS-integrated checklists or paper-based logbooks—to capture operator identity, date/time, cycle parameters, and post-cycle verification outcomes.
Applications
- Routine pre-sterilization cleaning of volumetric flasks, burettes, syringes, and HPLC sample vials.
- Removal of machining oils and metal fines from precision calibration standards and gauge blocks.
- Preparation of substrates prior to surface characterization (e.g., AFM, SEM, contact angle measurement).
- Cleaning of reusable electrophoresis combs, gel trays, and electrode assemblies in molecular biology labs.
- Decontamination of reusable PPE components (e.g., face shields, goggles) when used with EPA-registered disinfectant solutions compatible with ultrasonics.
FAQ
Is the SUC-3 suitable for cleaning delicate optical lenses or coated mirrors?
No. The 37 kHz frequency and fixed 90 W power may cause pitting or delamination on anti-reflective or metallic coatings. Use only with uncoated glass or quartz substrates after verifying compatibility with your specific lens manufacturer’s guidelines.
Can I use organic solvents such as acetone or isopropanol in the tank?
Only if the solvent is explicitly rated for ultrasonic use and the tank is fully ventilated. Flammable solvents require explosion-proof ultrasonic systems; the SUC-3 is designed exclusively for aqueous or low-volatility, non-flammable cleaning solutions.
Does the unit include a degassing function?
No. Degassing must be performed manually by running the unit empty for 5–10 minutes before loading samples, or by applying vacuum to the solution separately.
What maintenance is required for long-term reliability?
Rinse the tank with deionized water after each use; inspect transducers periodically for visible delamination or discoloration; clean the exterior with isopropyl alcohol wipes—avoid abrasive cleaners or submersion of the control panel.
