Titan SCB-30 30-Gallon Corrosive Liquid Safety Cabinet

Overview

The Titan SCB-30 is a purpose-engineered 30-gallon (114 L) safety cabinet designed specifically for the secure, code-compliant storage of weakly corrosive liquids—including organic acids (e.g., acetic, citric), dilute inorganic acids (e.g., ≤10% hydrochloric or sulfuric acid), alkaline solutions (e.g., sodium hydroxide <10%), and halogenated solvents with low reactivity toward mild steel. Unlike general-purpose flammable cabinets, the SCB-30 integrates material compatibility, structural integrity, and passive containment into a single UL-listed platform. Its double-walled 18-gauge cold-rolled steel construction—featuring a 1.5-inch ventilated air gap—provides thermal insulation and mechanical reinforcement without reliance on fireboard lining, ensuring long-term dimensional stability under ambient laboratory conditions. The cabinet operates as a passive containment system: it does not require external power, fans, or active monitoring, making it suitable for installation in ISO Class 5–8 cleanrooms, QC laboratories, and GMP-compliant manufacturing suites where electrical redundancy and electromagnetic interference are critical constraints.

Key Features

• Corrosion-resistant epoxy-polyester powder coating applied to both interior and exterior surfaces—tested per ASTM D3359 (cross-hatch adhesion) and ASTM B117 (500-hour salt-spray exposure) to ensure sustained chemical resistance against pH 2–12 aqueous solutions.
• Self-closing, three-point latching door with positive-locking mechanism compliant with NFPA 30 and OSHA 1910.106 standards; door remains fully functional after 100,000 open/close cycles per ANSI/BHMA A156.13 Grade 2 durability testing.
• Adjustable, galvanized steel shelves rated to 175 lb (79 kg) each, supported by reinforced brackets with anti-tip retention pins—enabling flexible vertical configuration for heterogeneous container sizes (from 500 mL bottles to 5-gallon carboys).
• Integrated 2-inch deep, leak-proof sump capable of retaining ≥2 gallons of spilled liquid—exceeding EPA 40 CFR 264.175 secondary containment volume requirements for containers ≤55 gallons.
• Field-configurable ventilation: pre-drilled 4-inch (102 mm) duct collar allows connection to building exhaust (ducted mode) or optional activated carbon filtration module (recirculating mode), supporting compliance with local air quality ordinances and ASHRAE 110 fume hood performance criteria.

Sample Compatibility & Compliance

The SCB-30 is validated for use with Class II corrosives as defined in the DOT Hazardous Materials Table (49 CFR 172.101) and aligned with GHS Category 1–2 skin corrosion/irritation classifications. It is not intended for strong oxidizers (e.g., concentrated nitric acid), hydrofluoric acid, or molten alkali metals. All structural welds undergo visual and dye-penetrant inspection per AWS D1.1. The cabinet carries third-party certification to ANSI Z358.1-2014 (emergency eyewash/shower proximity guidelines) and is documented for audit readiness under FDA 21 CFR Part 211 (cGMP for finished pharmaceuticals) and ISO 15190:2020 (medical laboratory quality and competence). Each unit ships with a traceable Certificate of Conformance, including batch-specific coating thickness verification (measured via magnetic induction per ASTM D7091) and sump integrity test report.

Software & Data Management

As a passive mechanical storage solution, the SCB-30 does not incorporate embedded electronics or digital interfaces. However, its design supports integration into enterprise-level laboratory asset management systems: QR-coded serial plates enable barcode-scanned registration into CMMS platforms (e.g., IBM Maximo, SAP EAM); dimensional data (WxDxH: 38″ × 24″ × 76″) and weight (325 lb / 147 kg) are provided in STEP and IFC formats for BIM modeling in Revit or ArchiCAD. Optional RFID tag mounting points (ISO/IEC 18000-6C compliant) allow for real-time location tracking within smart lab infrastructures without modifying factory-sealed components.

Applications

• Quality Control Laboratories: Secure storage of titrants (e.g., standardized HCl, NaOH), buffer stock solutions, and cleaning agents used in HPLC system maintenance.
• Pharmaceutical Manufacturing: Isolation of intermediate-grade acids and bases during API synthesis steps under cGMP Annex 1 environmental controls.
• Academic Research Facilities: Centralized containment for teaching labs handling diluted corrosives in chemistry and materials science curricula.
• Environmental Testing Labs: Storage of preserved water samples (e.g., acidified with HNO₃ per EPA Method 200.8) prior to ICP-MS analysis.
• Maintenance Workshops: On-site staging of industrial degreasers and pickling solutions used in equipment calibration and validation protocols.

FAQ

Does the SCB-30 meet FM Global or UL 1275 certification requirements?
Yes—the cabinet is FM Approved (FM 6050) and UL Classified (UL 1275, Category XCHX) for corrosive liquid storage, with full test reports available upon request.
Can the cabinet be anchored to concrete flooring?
Yes—pre-drilled anchor holes (¼”-20 UNC) are located at all four base corners; hardware kit (including sleeve anchors and washers) is supplied standard.
Is the interior coating resistant to hydrogen peroxide vapor decontamination cycles?
The epoxy-polyester finish maintains integrity under ≤35% v/v hydrogen peroxide vapor exposure at 55°C for ≤2 hours—validated per ISO 14644-3 Annex C protocols.
What is the maximum operating temperature range for continuous use?
Ambient operation from 0°C to 40°C (32°F to 104°F); no derating required up to 85% relative humidity non-condensing.
Are replacement shelves and sump liners available as spare parts?
Yes—genuine Titan replacement shelves (P/N SHL-SCB30), sump liner kits (P/N SLK-SCB30), and door gasket assemblies (P/N GSK-SCB30) are stocked globally with lead time ≤5 business days.