- All
- Favorite
- Popular
- Most rated
| Brand | Boante |
|---|---|
| Model | Mini-4plus |
| Instrument Type | Benchtop Bead Mill Grinder |
| Construction | All-Metal Housing |
| Sample Capacity | 4 or 6 Tubes Simultaneously |
| Grinding Motion | 3D “Figure-8” Orbital Motion (Vortexing + Oscillation + Suction) |
| Max Speed | 6000 rpm |
| Acceleration Time | ≤2 s to Max Speed |
| Grinding Time Range | 0–9999 s (Programmable) |
| Final Particle Size | ≤5 µm |
| Noise Level | <55 dB(A) |
| Display | LCD Interface |
| Dimensions (W×D×H) | 210 × 185 × 220 mm |
| Weight | 4.8 kg |
| Power Consumption | 35 W |
| Safety | Interlocked Lid Sensor, Sealed Tube Processing, Zero Cross-Contamination Design |
| Compliance | Designed for GLP-compliant sample prep workflows |
| Brand | Boante |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| CO₂ Control Range (M-type) | Ambient +100 ppm to 2000 ppm |
| CO₂ Control Range (MD-type) | 180 ppm to 2000 ppm (customizable) |
| CO₂ Detection Accuracy | ±1 ppm |
| CO₂ Control Accuracy | ±3% of setpoint |
| CO₂ Sensor Technology | NDIR with Vaisala CARBOCAP® module |
| Response Time (0→2000 ppm) | ≤5 s |
| Concentration Step Response Time (100 ppm step) | 15 s |
| CO₂ Output Channels | 2 or 3 |
| Air Output Channels | 2 or 3 |
| Gas Flow Range (CO₂) | 0.16–1.6 L/min (optional high-flow: 0.4–6 L/min) |
| Pump Type | Oil-free DC diaphragm pump |
| Flow Stability | ±0.3% FS |
| Noise Level | ≤42 dB(A) |
| Chamber Material | Stainless steel with corrosion-resistant coating |
| Calibration Interval | 12 months |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Operating Temperature | 10–30 °C |
| Compatible Media | Freshwater, synthetic seawater, low-salinity and high-salinity seawater (≤45‰) |
| Control Interface | 7-inch capacitive touchscreen |
| Control Algorithm | Adaptive PID + fuzzy logic |
| Data Logging | Real-time timestamped gradient tracking with power-loss recovery |
| Brand | Boante |
|---|---|
| Model | BAT260/360/500/650/850/1050/1600/2500-GZ |
| Temperature Range | 5–50 °C |
| Temperature Uniformity | ±1 °C (at same shelf level) |
| Humidity Range | Not applicable (GZ series is humidity-free) |
| 光照 Intensity | 0–600 μmol/m²/s (0–100% continuously adjustable, measured at 100 mm from LED source) |
| Light Source | Top-mounted horizontal LED array with independent per-shelf dimming control |
| Capacity | 260–2500 L |
| Control System | BAT200PG intelligent controller with 7-inch color touchscreen, 24-segment programmable cycle (real-time Beijing time), adaptive three-stage fuzzy logic PID algorithm |
| Data Logging | Internal storage for ≥5 years of timestamped temperature and operational data |
| Safety Protections | Compressor overheat, fan overheat, overtemperature, high-pressure cutoff, overload protection, independent mechanical overtemperature limiter |
| Certifications & Compliance | Designed to support GLP-compliant workflows |
| Brand | Boante |
|---|---|
| Model | BAT600-ZDSS |
| Origin | Hubei, China |
| Type | Custom-Size Artificial Climate Incubator for Plant Phenotyping and Gene Function Studies |
| Temperature Range | 5–45 °C (Control Accuracy ≤ ±0.2 °C |
| Humidity Range | 30–95 % RH (Control Accuracy ≤ ±5 % RH) |
| Lighting | Top-mounted LED array with full-spectrum white (350–800 nm), 660 nm red, 470 nm blue, and 720 nm far-red |
| spectral ratio configurable (e.g., R | B:W:FR = 5:2:2:1) |
| Control System | 15.6″ industrial touchscreen + PLC-based logic controller with embedded Chinese OS |
| Environmental Exchange | Programmable fresh-air intake via energy-recovery heat exchanger |
| Safety & Compliance | Over-temperature cut-off, compressor suction pressure regulation (0–480 psig), PTC auxiliary heating, IoT-enabled remote monitoring and control (edge-computed, no client software required), real-time curve logging (365-day history), GLP-ready audit trail capability (timestamped parameter changes, user logins, alarm events) |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Custom-Engineered (Non-Standard) |
| Quotation | Upon Request |
| Temperature Range | 10–45°C (with lighting), 0–45°C (without lighting) |
| Temperature Uniformity | ±1.0°C (standard), ±2.0°C (extended range) |
| Humidity Range | 40–80% RH (with lighting), 40–85% RH (without lighting) |
| Humidity Uniformity | ±3–5% RH |
| Photosynthetic Photon Flux Density (PPFD) Options | 0–200, 0–600, 0–800, or 0–1200 µmol/m²/s (measured at 150 mm from source) |
| Fresh Air Exchange | ≥300 m³/h, ≥10 air changes/h |
| Chamber Volume & Dimensions | Fully Customizable |
| Insulation | Polyurethane sandwich panels (50/75/100 mm thick), A1-class fire-rated core, steel facing ≥0.426 mm, density ≥120 kg/m³ |
| Lighting Spectrum | Continuous 380–780 nm (including far-red), PAR-optimized LED array |
| Control Interface | Color TFT touchscreen PLC (5″–15.6″ options), embedded Boante-developed firmware on MOXA/Kunlun Tongtai platform |
| Data Logging | ≥5 years local storage, GLP-compliant timestamped records |
| Remote Access | 4G/Wi-Fi enabled IoT gateway with role-based user management (1 admin + ≥20 users), SMS/WeChat alerting |
| Safety Systems | Dual-stage temperature safety cutoff, high/low pressure compressor protection, earth leakage detection, overcurrent/overheat coil monitoring, UV sterilization lamp (≥90 µW/cm², timer-controlled) |
| Air Quality | ISO Class 7 (10,000-grade) cleanroom performance (static): ≤350,000 particles/m³ @ 0.5 µm |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Grind-96PL |
| Instrument Category | Cryogenic Ball Mill Grinder |
| Sample Capacity | 96 × 2 mL tubes (standard), configurable for 12 × 5 mL, 4 × 10/15/25 mL, or 2 × 50 mL grinding vessels |
| Display | Touchscreen interface with multi-segment programmable protocol |
| Grinding Frequency | 0–70 Hz |
| Grinding Time | 0 s – 99 min (adjustable in 1-s increments) |
| Final Particle Size | ≤5 µm |
| Grinding Media Diameter | 0.1–30 mm |
| Grinding Media Materials | Stainless steel, chrome steel, zirconia, tungsten carbide, quartz |
| Acceleration | Reaches target frequency within ≤2 s |
| Noise Level | <55 dB(A) |
| Grinding Principle | Vertical high-energy bead milling |
| Operation Modes | Dry grinding, wet grinding, cryogenic grinding |
| Cryogenic Temperature Range | 0 °C to –50 °C (precisely adjustable) |
| Dimensions (W×D×H) | 700 × 400 × 500 mm |
| Weight | 50 kg |
| Safety Features | Interlocked chamber door, auto-centering clamping system, fully enclosed sample tubes during operation |
| Construction | Full-metal frame with reinforced housing |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments |
| Key | Brand: Boante |
|---|---|
| Model Range | BAT80/150/250/360/460/600-HSW |
| Origin | Hubei, China |
| Temperature Range | 4–60 °C |
| Temp. Uniformity | ±0.5 °C (within chamber) |
| Temp. Stability | ±0.1 °C |
| Humidity Range | 30–90 %RH (at 15–45 °C ambient operating range) |
| Humidity Control Accuracy | ±1 %RH |
| Humidity Fluctuation | ±3 %RH |
| Display | 7-inch capacitive touchscreen |
| Control Algorithm | Adaptive PID |
| Sensor | PT100 platinum resistance thermometer |
| Cooling System | DC inverter-driven refrigeration |
| Air Circulation | Axial-flow micro-circulation fan system |
| Chamber Material | Mirror-finish stainless steel interior with radius-corner design |
| Safety Protections | Compressor overheat, fan overheat, overtemperature, high-pressure cutoff, overload protection |
| Optional Interfaces | RS485, USB, thermal printer output, remote monitoring capability |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Model | BAT80SH-2 / BAT150SH-2 / BAT250SH-2 / BAT520SH-2 |
| Air Circulation | Forced convection |
| Temperature Range | 4°C to 60°C |
| Temperature Accuracy | ±0.1°C |
| Temperature Uniformity | ±0.8°C (within same shelf plane) |
| Temperature Fluctuation | ±0.5°C |
| Capacity Options | 80 L / 150 L / 250 L / 520 L (modular multi-zone configuration) |
| External Dimensions | 895×590×1590 mm (BAT80SH-2) to 1150×870×1650 mm (BAT520SH-2) |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ZSQ-1000HPG |
| Instrument Type | Semi-Automatic |
| Temperature Range | −10°C to 10°C (dark), 10°C to 45°C (light-on) |
| Temperature Uniformity | ±1.5°C |
| Humidity Range | 40–80% RH (light-on), 50–90% RH (light-off), within 15–45°C operational range |
| Humidity Uniformity | ±5% RH |
| Photosynthetic Photon Flux Density (PPFD) | 200–1500 μmol/m²/s (customizable, 0–100% stepless dimming) |
| Chamber Capacity | Customizable |
| External Dimensions | Customizable |
| Brand | Boante |
|---|---|
| Model | IBS-830A |
| Type | Temperature-Controlled Shaking Incubator |
| Drive | DC Motor |
| Amplitude | φ26 mm, φ50 mm |
| Temperature Range | 4–60 °C |
| Temperature Fluctuation | ±0.1 °C |
| Temperature Uniformity | ±1 °C |
| External Dimensions (3-Layer) | 970 mm × 720 mm × 1800 mm |
| Shelf Dimensions (per layer) | 530 mm × 500 mm |
| Internal Chamber Dimensions (per layer) | 580 mm × 550 mm × 360 mm |
| Capacity (per layer) | 250 mL × 30, 500 mL × 20, 1000 mL × 12, or 2000 mL × 6 |
| Speed Range | 0–300 rpm |
| Speed Accuracy | ±1 rpm |
| Display | OLED Touchscreen |
| Control System | PID Microprocessor-Based Intelligent Control |
| Air Circulation | Forced Convection |
| Timer Range | 0–999.9 h |
| Programming | 5 Preset Programs, up to 30 Segments per Program |
| Data Logging | 1-min Interval, 90-Day Storage, USB Export |
| Power Supply | AC 220 V, 50–60 Hz |
| Power Consumption | 1300 W |
| Net Weight (3-Layer) | 495 kg |
| Brand | Boante |
|---|---|
| Model | BAT420/620/800/1000/1300/1800-DGH |
| Origin | Hubei, China |
| Temperature Range | RT+10 °C to 250 °C |
| Temperature Uniformity | ±3% of setpoint |
| Temperature Fluctuation | ±1 °C |
| External Dimensions (W×D×H) | 805×735×1685 mm (BAT420) to 1360×1440×1685 mm (BAT1800) |
| Internal Dimensions (W×D×H) | 650×515×1250 mm (BAT420) to 1150×1200×1300 mm (BAT1800) |
| Chamber Material | Mirror-finish stainless steel (AISI 304) |
| Control System | LCD blue-backlit microprocessor PID controller with real-time display |
| Timer Range | 0–9999 min or 0–999 h |
| Air Circulation | Rear-mounted horizontal forced-air system with centrifugal blower |
| Safety Features | Independent over-temperature cut-off, audible/visual alarm, door-seal integrity monitoring |
| Brand | Boante |
|---|---|
| Model | XFY-200I |
| Type | Electromagnetic Vibratory Sieve Analyzer |
| Measurement Range | 0.03–2 mm |
| Max Sample Load | 3 kg |
| Sieve Diameter Options | 76, 100, 150, 200, 203 mm |
| Vibration Frequency | 1–70 Hz |
| Amplitude Control | Auto-adjusting, digitally regulated |
| Drive System | Electromagnetic (3000 cycles/min at 50 Hz) |
| Display | LCD touchscreen interface |
| Timer Range | 0–99 min (1 s resolution) |
| Power Supply | AC 220 V, 50–60 Hz |
| Power Consumption | 185 W |
| Noise Level | ≤15 dBA (with acoustic enclosure) |
| Net Weight | 35 kg |
| Dimensions (W×D×H) | 300 × 400 × 600 mm |
| Compliance | Designed for ISO 2591-1, ASTM E11, USP <786>, and GLP-compliant laboratory environments |
| Sieve Types Supported | Woven wire mesh (stainless steel), perforated metal plates, electroformed thin-film sieves, nylon mesh |
| Standard Sieves Supplied | 6 pcs |
| Optional Sieves | Up to 10 pcs |
| Operating Modes | Continuous or intermittent vibration (programmable on/off intervals) |
| Brand | Boante |
|---|---|
| Model | BAT50/80/150/240/400/640-GW |
| Temperature Range | RT+10°C to 500°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±1°C |
| Interior Dimensions (W×D×H) | 500×500×600 mm |
| Exterior Dimensions (W×D×H) | 650×880×930 mm |
| Interior Material | Mirror-Finish Stainless Steel (AISI 304) |
| Control System | Microprocessor-Based PID Controller with LCD Display |
| Heating Method | Electric Resistive Heaters with Forced-Air Convection |
| Safety Features | Independent Over-Temperature Protection with Audible/Visual Alarm |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Boante |
|---|---|
| Model | Grind-96S |
| Instrument Type | Ball Mill Grinder |
| Sample Capacity | Up to 96 × 2 mL tubes (with interchangeable adapters) |
| Grinding Frequency | 0–70 Hz |
| Grinding Time | 0 s–99 min (programmable) |
| Final Particle Size | ≤5 µm |
| Grinding Media Diameter | 0.1–30 mm |
| Grinding Media Materials | Stainless steel, chrome steel, zirconia, tungsten carbide, quartz |
| Acceleration | Achieves target frequency within 2 s |
| Noise Level | <55 dB(A) |
| Dimensions | 340 × 380 × 600 mm |
| Weight | 35 kg |
| Safety Features | Interlocked chamber door, automatic centering clamping, fully enclosed tube system |
| Grinding Modes | Dry grinding, wet grinding, cryogenic grinding (with liquid nitrogen adapters) |
| Display | Touchscreen interface with multi-step program control |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Model | IBS-830C |
| Instrument Type | Temperature-Controlled Shaking Incubator |
| Drive Mechanism | DC Motor Drive |
| Amplitude | φ3 mm |
| Temperature Range | 4–60 °C |
| Temperature Fluctuation | ±0.6 °C |
| Temperature Uniformity | ±1 °C |
| External Dimensions (3-Layer) | 970 mm × 720 mm × 1800 mm |
| Shaking Frequency | 0–1200 rpm |
| Frequency Accuracy | ±1 rpm |
| Internal Chamber Dimensions (per layer) | 580 mm × 550 mm × 360 mm |
| Shelf Plate Size (per layer) | 530 mm × 500 mm |
| Max Capacity (per layer) | 20 × 96-well plates |
| Power Supply | AC 220 V, 50–60 Hz |
| Power Consumption | 1300 W |
| Weight (3-layer) | 495 kg |
| Brand | Boante |
|---|---|
| Model | BAT20/50/80/125/210-TGF |
| Type | General-Purpose Forced-Convection Drying Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±3% of setpoint |
| Temperature Fluctuation | ±1°C |
| External Dimensions (W×D×H) | 795×560×610 mm |
| Internal Chamber Dimensions (W×D×H) | 500×350×450 mm |
| Interior Material | Mirror-Finish Stainless Steel (AISI 304) |
| Control System | LCD Color Touch Controller with PID Algorithm |
| Sensor | PT100 Platinum Resistance Thermometer |
| Air Circulation | Rear-Mounted Horizontal Forced-Air System with Three-Speed Centrifugal Blower |
| Safety Features | Independent Over-Temperature Alarm with Audible/Visual Alert |
| Compliance | Designed per GB/T 5170.2–2017 (Electrical Safety & Thermal Performance of Environmental Testing Equipment), Compatible with GLP Documentation Requirements |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Model | BAT80HS-GA |
| Instrument Type | Vertical Chamber |
| Temperature Range | −70 °C to +150 °C (selectable variants: −60 °C, −40 °C, −20 °C, 0–100 °C) |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ≤ ±1.5 °C (at same horizontal plane) |
| Temperature Fluctuation | ≤ ±0.5 °C (high-temp segment), ≤ ±1.0 °C (low-temp segment) |
| Humidity Fluctuation | ±3 %RH |
| Heating Rate | ≥2–3 °C/min (non-linear, no-load, ambient to max temp) |
| Internal Dimensions | 400 × 400 × 500 mm (W × D × H) |
| External Dimensions | 950 × 870 × 1650 mm (W × D × H) |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Model | BAT70/150/250/360/460/600-SH |
| Air Circulation | Forced Convection |
| Temperature Range | 4°C to 60°C |
| Temperature Accuracy | ±0.1°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±1.0°C (within same shelf plane) |
| Capacity | 70 L / 150 L / 250 L / 360 L / 460 L / 600 L |
| External Dimensions | 600×570×1220 mm (BAT70-SH) |
| Internal Dimensions | 400×350×500 mm (BAT70-SH) |
| Shelf Count | 2–4 adjustable stainless-steel shelves |
| Controller | Full-color LCD with PID algorithm, real-time parameter display, timer range 0–9999 min or 0–999 h |
| Safety Features | Compressor overheat protection, fan overheat protection, overtemperature cutoff, high-pressure shutdown, motor overload protection |
| Optional | UV germicidal lamp (for inner door or shelf), RS485/USB interface, thermal printer output, remote monitoring capability |
| Brand | Boante |
|---|---|
| Origin | Hubei, China |
| Model | IBS-620LS |
| Instrument Type | Temperature-Controlled Shaking Incubator |
| Oscillation Amplitude | φ26 mm |
| Temperature Range | 4–60 °C |
| Temperature Fluctuation | ±0.1 °C |
| Temperature Uniformity | ±1 °C |
| External Dimensions | 720 mm × 800 mm × 1300 mm |
| Oscillation Speed Range | 0–300 rpm |
| Speed Accuracy | ±1 rpm |
| Shelf Size | 485 mm × 485 mm |
| Max Capacity (per shelf) | 250 mL × 25 |
| Timer Range | 0–999.9 h |
| Power Supply | AC 220 V, 50–60 Hz |
| Power Consumption | 1000 W |
| Net Weight | 185 kg |
| Brand | Brookfield |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | BAT50-JDH / BAT100-JDH / BAT150-JDH / BAT250-JDH |
| Air Circulation | Forced Horizontal Convection |
| Control Method | Digital PID Controller |
| Temperature Range | RT+5°C to 65°C |
| Temperature Control Accuracy | ±0.1°C |
| Temperature Uniformity | ±0.5°C (at 37°C) |
| Temperature Fluctuation | ±0.2°C |
| Capacity | 50 L / 100 L / 150 L / 250 L |
| External Dimensions (W×D×H) | 650×580×920 mm (BAT100-JDH reference) |
| Internal Chamber Material | Mirror-Finish Stainless Steel |
| Door Design | Double-Layer Insulated Glass with Sealed Gasket |
| Safety Features | Independent Over-Temperature Alarm (Audible & Visual) |
| Optional Interfaces | RS485 or USB for Data Logging & Remote Monitoring |
| Brand | Boante |
|---|---|
| Model | BAT64-FS |
| Layers | 6 |
| Columns | 4 |
| Dimensions (L×W×H) | 560 × 140 × 348 mm |
| Compatible Cryobox Size | 133 × 133 × 54 mm |
| Paper Cryobox Capacity (81-well) | 24 per layer |
| Plastic Cryobox Capacity (100-well) | 24 per layer |
| Material | 0.6–1.0 mm Stainless Steel (AISI 304 grade equivalent) |
| Construction | Panel-stamped frame with precision resistance spot welding |
| Drawer Mechanism | Independent slide-out drawers with integrated cryobox retainer lips and access cutouts |
| Label Slot | Dedicated front-facing label holder per drawer |
| Customization | Available for non-standard cryobox dimensions (lead time ~15 working days) |
| Warranty | 12-month limited warranty covering manufacturing defects under normal ULT operation (−80 °C) |
| Brand | Brookfield |
|---|---|
| Model | BAT40/80/150/240/300-LGF |
| Origin | Hubei, China |
| Type | General-Purpose Forced-Convection Drying Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±3% of setpoint |
| Temperature Fluctuation | ±1°C |
| External Dimensions (W×D×H) | 485×505×815 mm (BAT40-LGF) |
| Internal Chamber Dimensions (W×D×H) | 300×350×400 mm (BAT40-LGF) |
| Interior Material | Mirror-Finish Stainless Steel (SUS304) |
| Control System | LCD Display with PID Algorithm |
| Sensor | PT100 Platinum Resistance Thermometer |
| Air Circulation | Rear-Mounted Horizontal Forced-Air System with Three-Speed Adjustable Centrifugal Blower |
| Safety Features | Over-Temperature Alarm with Audible and Visual Alert |
| Optional Accessories | Touchscreen Controller (5″), USB Data Logging, RS485 Interface for PC Integration, Remote Monitoring via WeChat Mini-Program |
| Brand | Boante |
|---|---|
| Model | Grind-LT48P |
| Type | Cryogenic Ball Mill Grinder |
| Sample Capacity | 48 × 2 mL tubes (standard) |
| Cooling Range | −50 °C to 20 °C |
| Grinding Frequency | 0–70 Hz |
| Grinding Time | 0 s–99 min |
| Final Particle Size | ≤5 µm |
| Noise Level | <55 dB(A) |
| Dimensions | 450 × 450 × 720 mm |
| Weight | 55 kg |
| Display | 5-inch OLED touchscreen |
| Pre-stored Protocols | ≥20 |
| Multi-step Programming | Yes |
| Grinding Motion | Vertical reciprocating + 3D orbital motion |
| Grinding Media Diameter | 0.1–30 mm |
| Stroke Length | 34 mm (vertical) |
| Refrigeration Rate | 20 °C → −50 °C in ~40 min |
| Safety | Electromagnetic lid lock, auto-centering clamping, fully enclosed sample tubes |
| Compliance | Designed for GLP-compliant labs |
| Brand | Boante |
|---|---|
| Model | IBS-610TS |
| Instrument Type | Temperature-Controlled Orbital Shaker |
| Timing Range | 0–999.9 h |
| Oscillation Frequency | 0–300 rpm |
| Frequency Accuracy | ±1 rpm |
| Orbit Diameter | 26 mm |
| Display | LED Touchscreen |
| Control System | PID Microprocessor-Based |
| Max Capacity (per Deck) | 250 mL × 30, 500 mL × 16, 1000 mL × 12, or 2000 mL × 6 |
| Shelf Dimensions | 550 mm × 540 mm |
| External Dimensions (3-Deck) | 550 mm × 550 mm × 240 mm |
| Weight | 30 kg |
| Power Supply | AC 220 V, 50–60 Hz |
| Power Consumption | 200 W |
| Construction | 316 Stainless Steel Deck with Reinforced Corner Steel Frame |
| Finish | High-Temperature Electrostatic Powder Coating |
| Features | Power-Fail Recovery, Multi-Axis Balanced Drive, No-Balance Required Placement |
Show next