- All
- Favorite
- Popular
- Most rated
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-4E |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Control Interface | Industrial Touchscreen + PLC |
| Programmability | 12-Stage Customizable Protocol |
| Safety Features | Vacuum Delay Start, Auto Venting, Over-Temp & Over-Pressure Protection |
| Cold Trap Compatibility | Optional –55°C, –80°C, or <–110°C Ultra-Low-Temperature Condenser |
| Rotor Recognition | Up to 50 Rotor Types Auto-Detected |
| Chamber & Rotor Coating | PTFE (Teflon®) Anti-Corrosion Finish |
| Rotational Speed Range | 400–1800 rpm (Variable Frequency Drive) |
| Ultimate Vacuum | <10 Pa |
| Compliance | Designed for GLP/GMP environments |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-2 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum System | Compatible with diaphragm or direct-coupled rotary vane pumps |
| Display | Touchscreen interface |
| Control Architecture | PLC-based automation |
| Safety Features | Auto-vacuum release, magnetic drive seal, ice crystal prevention logic (vacuum initiation only after target speed achieved) |
| Chamber & Rotor Coating | PTFE (Teflon®)-coated for chemical resistance and sterilizability |
| Rotors | Up to 50 rotor types auto-recognized |
| Optional Modules | Ultra-low temperature condenser (< −110°C), cryogenic thermostat (−4°C to +4°C), endpoint detection, vacuum oil mist filter, and process optimization support |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-1E |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to –80 °C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Vacuum Limit | <10 Pa |
| Rotational Speed Range | 400–1800 rpm (optional) |
| Chamber & Rotor Coating | PTFE (Teflon®) |
| Control Interface | 7-inch Industrial Touchscreen + PLC |
| Safety Features | Vacuum Delay Start, Auto Venting, Over-Temp & Over-Speed Protection |
| Compliance | GMP-Compatible Design, FDA 21 CFR Part 11–Ready Software Architecture (with optional audit trail module) |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-3 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump | Direct-coupled rotary vane pump |
| Display | Touchscreen interface |
| Control Mode | Multi-stage programmable (12 segments) |
| Rotor Recognition | Auto-identification for up to 50 rotor types |
| Chamber & Rotor Coating | PTFE (Teflon®)-coated |
| Cold Trap Compatibility | Optional ultra-low temperature condenser (< −110°C) |
| Safety Features | Vacuum interlock (vacuum applied only after target speed reached), automatic venting, overload/overheat protection |
| Compliance | Designed for GLP/GMP environments |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-4 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Cold Trap Compatibility | Optional −50°C / −80°C / <−110°C cryo-traps |
| Safety Features | Vacuum-delayed spin-up, Auto venting, Magnetic drive seal, Corrosion-resistant PTFE-coated chamber & rotors |
| Control Interface | Industrial touchscreen + PLC |
| Programmability | 12-step customizable protocol per run (speed, temp, vacuum, time) |
| Rotor Recognition | Supports ~50 rotor types |
| Mobile Monitoring | Remote status tracking via smartphone app |
| Compliance | Designed for GLP/GMP environments |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-3E |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4°C to 80°C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Source | Direct-coupled rotary vane pump |
| Display | LED panel |
| Control Mode | Single-stage programmable |
| Auto Venting | Yes |
| Cold Trap Compatibility | Optional (−50°C / −80°C / <−110°C) |
| Rotor Coating | PTFE (Teflon®) |
| Safety Features | Vacuum interlock, overtemperature protection, rotor imbalance detection, automatic vacuum release |
| Brand | BIOCOOL |
|---|---|
| Origin | Tianjin, China |
| Model | FastDry-1 |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to –80 °C |
| Temperature Control | Gradient PID Control |
| Sample Capacity | 132 × 1.5 mL tubes |
| Vacuum Pump Options | Diaphragm or Direct-Coupled Rotary Vane Pump |
| Ultimate Vacuum | <10 Pa |
| Rotational Speed | 400–1800 rpm (variable frequency drive) |
| Chamber & Rotor Coating | PTFE (Teflon®) |
| Control Interface | 7-inch Industrial Touchscreen + PLC |
| Safety Features | Vacuum-delayed spin initiation, Auto Venting, Overheat/Overpressure/Imbalance Protection |
| Compliance | Designed for GLP/GMP-aligned workflows |
Show next