ATI
Filter
Showing all 14 results
| Brand | ATI |
|---|---|
| Origin | USA |
| Model | 100X |
| Compliance | NIOSH 42 CFR Part 84, GB 2626–2019, GB 19083, EN 13274-7:2019, ASTM F3502-21, ISO 23328, YY 0469 |
| Aerosol Types | NaCl (salt) or DOP/PAO/paraffin oil |
| Flow Range | 10–170 L/min |
| Filtration Efficiency Range | up to 99.9995% |
| Sampling | 100% isokinetic aerosol sampling |
| Aerosol Reservoir | 3.8 L (1 gal) integrated patented replenishment system |
| Test Area | 100 cm² standard flat-media fixture |
| Configuration Options | Manual, Automatic (PLC-integrated), Hybrid |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | 100X |
| Instrument Type | Aerosol Testing System |
| Compliance Standards | NIOSH 42 CFR Part 84, GB 2626, EN 13274-7:2019, ASTM F3502-21 |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | 2i |
| Instrument Type | Aerosol Photometer |
| Price Range | USD $6,800 – $13,600 (est.) |
| Compliance | ISO 14644-3, NSF/ANSI 49, IEST-RP-CC034, EN 12469, CE, UKCA, EN 61010-1:2010, EN 61326-1:2006, FCC Part 15 Subpart B, ISED ICES-003 Issue 7 |
| Dimensions | 25.7 cm × 33 cm × 15.2 cm (10.1 in × 13 in × 6 in) |
| Weight | 8.6 kg (19 lbs) |
| Power Input | 100–250 V AC, 50/60 Hz auto-ranging |
| Flow Rate | 28.3 L/min ±10% (1 ft³/min) |
| Dynamic Range | 0.0001–120 mg/m³ |
| Sensitivity | ±1% of reading (0.01–100% range) |
| Repeatability | ±0.5% of reading (0.01–100% range) |
| Zeroing | Automatic at startup |
| Alarm | User-configurable audible, visual, and haptic |
| Aerosol Compatibility | PAO-4, DOP, DOS/DEHS, Ondina, PEG, Krydol, corn oil, mineral oil, paraffin |
| Data Output | Thermal printer, USB port |
| Data Storage | Up to 150,000 scan records (CSV + PDF) |
| Calibration System | ATI CALIBRA™ 800 aerosol generator with gravimetric traceability and multi-point linearity verification (patent-pending) |
| Software Compliance | 21 CFR Part 11–compliant audit trail, encrypted storage, password protection, electronic signatures (iProbe Plus only) |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer | ATI (American Technology Inc.) |
| Type | Imported |
| Model | 4B |
| Price Range | USD $1,200 – $6,500 |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | 5D |
| Price Range | USD $6,800 – $13,600 |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | 6D |
| Price Range | USD $6,800 – $13,600 (FOB USA) |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | iProbe Plus |
| Instrument Type | Aerosol Detector |
| Compliance | IEC 60068-2-27 (Shock), IEC 60068-2-6 (Vibration), IEC 60068-2-14 (Temperature Cycling), IEC 60068-2-27 (Thermal Shock) |
| Operating Temperature Range | −20 °C to +70 °C |
| Data Storage Capacity | ~150,000 scans |
| Output Formats | CSV, PDF |
| Interface | USB-A port for data export and firmware update |
| Display | 4.3-inch color touchscreen |
| Valve Control | Integrated upstream/downstream/zero valve control via touchscreen |
| Security | Password protection, encrypted data storage, audit-trail compliant with FDA 21 CFR Part 11 |
| Ergonomics | Contoured grip with finger grooves and thumb rest |
| Unique Feature | 10-second “rewind” function (patent pending) |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | PMLT |
| Pricing | Upon Request |
| Dimensions (Packaged) | 81 cm × 57 cm × 51 cm |
| Weight (Packaged) | ~41 kg |
| Weight (Unpackaged) | ~26 kg |
| Power Supply | 100–250 V AC, 50/60 Hz |
| Aerosol Agent | Polyalphaolefin-4 (PAO-4) |
| Detection Principle | Near-forward light-scattering photometry |
| Detection Range | 0.0005–100% aerosol concentration |
| Fit Factor Limit | 200,000 |
| Data Interface | RS-232 serial port |
| Patents | US 6,435,009 |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PMLT |
| Price | USD $100,000 |
| Dimensions (Packaged) | 81 cm × 57 cm × 51 cm |
| Weight (Packaged) | ~41 kg |
| (Unpackaged) | ~26 kg |
| Power Supply | 100–250 V AC, 50/60 Hz |
| Aerosol Agent | Polyalphaolefin-4 (PAO-4) |
| Detection Principle | Near-forward light-scattering photometry |
| Detection Range | 0.0005–100% aerosol penetration |
| Fit Factor Limit | 200,000 |
| Data Interface | RS-232 serial port |
| Brand | ATI |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | TDA-100 |
| Pricing | Upon Request |
| Brand | ATI |
|---|---|
| Origin | USA |
| Model | TDA-2i |
| Dimensions | 25.7 cm × 33 cm × 15.2 cm |
| Weight | 8.6 kg (host 7.5 kg + probe & accessories 1.1 kg) |
| Power Supply | 100–250 V AC, 50/60 Hz |
| Flow Rate | 28.3 L/min ±10% |
| Detection Range | 0.0001% – 100.0% (aerosol penetration) |
| Sensitivity | ±1% of reading (≥0.01% to 100%) |
| Repeatability | ±0.5% of reading (≥0.01% to 100%) |
| Light Source | Solid-state, low-power, low-heat scattering cavity LED (50,000–100,000 hr lifetime) |
| Aerosol Compatibility | PAO-4, DOP, Ondina, PEG, Krydol, Corn Oil, Mineral Oil, Paraffin |
| Alarm | Audible + visual flashing on host and iProbe display |
| Data Output | USB interface (standard), thermal printer (optional) |
| Reporting Modes | Continuous, Summary, Monitoring |
| Compliance | NSF/ANSI 49, IEST-RP-CC001, ISO 14644-3, EN 61010-1:2010, EN 61326-1:2006, CE, FCC |
| Brand | ATI |
|---|---|
| Origin | USA |
| Instrument Type | Ultrasonic Anemometer |
| Measurement Principle | Orthogonal Acoustic Time-of-Flight |
| Axes | 3D (U, V, W) |
| Wind Speed Range | ±65 m/s (model-dependent) |
| Temperature Range | −50 °C to +70 °C (extended to +250 °C) |
| Accuracy | Wind Speed ±0.01 m/s, Orthogonality ±0.1°, Sonic Temperature ±0.05 °C |
| Resolution | Wind Speed 0.001–0.01 m/s (configurable), Wind Direction 0.1°, Temperature 0.01 °C |
| Output | RS-232C/RS-422 serial (ASCII, UART), programmable baud rate (4800–460,800 bps), data rate 1/3600 Hz to 200 Hz |
| Power | 9–32 VDC, <100 mA |
| IP Rating | Fully sealed for outdoor deployment |
| Probe Dimensions (V-model) | 17.8 × 17.8 × 17.8 cm |
| Weight | <1.0 kg |
| Compliance | Designed for GLP-aligned atmospheric research, compatible with eddy covariance systems per ASTM D5116 and ISO 16000-28 |
| Brand | ATI |
|---|---|
| Model | WIND |
| Category | Wafer Defect Electron Beam Inspection Equipment |
| Origin | South Korea |
| Frame Material | Hairline Stainless Steel with White Powder Coating |
| Dimensions (W×D×H) | 1900 mm × 1680 mm × 2100 mm |
| Weight | 3.5 tons |
| Wafer Compatibility | 200 mm & 300 mm bare wafers |
| Load Port Support | FOUP, open cassette, ring cassettes (8″, 12″) |
| Alignment | Dual-wafer-size auto-alignment (200/300 mm bare |
| Automation Interface | SECS/GEM compliant, SEMI E84 standard |
| Vision System | Dual-optic 2D/3D module with real-time auto-focus |
| Inspection Modes | Normal/sawing inspection, bump inspection, edge/kerf measurement, 3D bump height/warpage/coplanarity/thickness/BLT metrology |
| Algorithm | Die-to-Die (D2D) registration using optimal die selection from adjacent four dies |
| Optional Module | IR imaging for subsurface crack and silicon bulk defect detection |
| Compliance | Fully aligned with SEMI standards |
| Brand | ATI |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | WIS-1000 |
| Instrument Type | Optical Patterned Wafer Defect Inspection System |
| Target Applications | Semiconductor Front-End Process Monitoring |
| Process Node Support | Sub-28 nm FinFET and FD-SOI Technologies |
| Compatible Wafer Sizes | 200 mm and 300 mm |
| Throughput | Up to 120 wafers per hour (depending on inspection recipe and defect density) |
| Optical Resolution | ≤ 150 nm (at λ = 405 nm, high-NA dark-field imaging) |
| Defect Detection Sensitivity | ≥ 95% for ≥ 80 nm particles and ≥ 120 nm pattern bridging/bridging defects on metal and dielectric layers |
| Compliance | ISO 9001-certified manufacturing |