Baltic FuelCells
Filter
Showing all 10 results
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | 300W PEM Fuel Cell Stack |
| Rated Power | 300 W (DC) |
| Output Voltage Range | 15–30 V DC |
| Nominal Current | 18 A |
| Operating Temperature | 5–55 °C |
| Electrical Efficiency | 45% @ 300 W |
| Fuel | 99.9% H₂ and ambient air |
| H₂ Consumption | 4.5 L/min (STP) |
| H₂ Inlet Pressure | 250–350 mbar(g) |
| Number of Cells | 30 |
| Cooling | Liquid-cooled |
| Interface | 1/4" internal thread (ISO 7/1) |
| Dimensions | 175 × 85 × 95 mm |
| Weight | 1.7 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | DiLiCo CURR TEMP |
| Instrument Type | Electrochemical Workstation |
| Channel Count | Single-Channel |
| Current Range | ±3 A/cm² |
| Current Accuracy | ±0.01 A (1% of reading) |
| Voltage Range | ≤2.5 V |
| Voltage Resolution | Not specified |
| Potentiostatic Range | 25 V |
| AC Impedance Frequency Range | 10 Hz |
| Temperature Range | ≤120 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Scan Interval | 2.0 s |
| Sensor Array | 48 nodes (6 × 8) |
| Node Size | 7 mm × 7 mm (0.5 cm²) |
| Node Material | Gold-plated |
| Communication Interface | CAN, USB |
| External Temperature Inputs | Up to 5 (PT-100/PT-500/PT-1000) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | Electrum 1000W |
| Output Power | 1000 W |
| Output Voltage Options | 24 V DC (20.5–27.5 V), 48 V DC (40.5–55 V), or 110–230 V AC |
| Rated Current | 40 A (24 V), 20 A (48 V), 4.5 A (230 V AC) |
| Operating Temperature | 5–45 °C |
| Hydrogen Consumption | 11 SL/min |
| Hydrogen Inlet Pressure | 2–20 bar |
| Dimensions (W×H×D) | 482 × 244 × 500 mm |
| Net Weight | 15 kg (24 V), 17 kg (48 V), 20 kg (AC inverter variant) |
| Response Time | Instantaneous |
| Enclosure | IP-rated, rack-mountable 19″ chassis |
| Compliance | CE, UL/cUL listed (per IEC 62282-2), EN 60950-1, ISO 14687-2 (hydrogen quality interface) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | qCF RFB |
| Weight (Fixture) | 10 kg |
| Dimensions (Fixture) | 300 mm × 300 mm × 230 mm |
| Active Area | 40 cm² (52 mm × 77 mm) |
| Electrode Travel Range | ±6 mm per side |
| Compression Adjustment | Manual, center-supported lever mechanism |
| Force Transmission | Direct clamping via quick-link principle |
| Temperature Control | External recirculating chiller/heater required |
| Operating Temperature Range | −6 °C to +60 °C |
| Fluid Contact Materials | Graphite and chemically resistant plastics only |
| Current Collection | Stainless steel / gold-plated terminals |
| Electrical Interface | 6 mm multi-point binding posts |
| Distance Measurement | Digital caliper with 0.01 mm resolution |
| Tubing Material | PVC |
| Compliance | Designed for ASTM E2981, IEC 62933-2-1, and ISO 14687-compliant RFB component validation |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF-125 |
| Active Area per Cell | 25 cm² |
| Max. Number of Cells | 5 |
| Temperature Range | up to 140 °C |
| Contact Pressure | up to 6.28 kN (2.5 N/mm², equivalent to 8 bar) |
| Gas Inlet/Outlet Port Diameter | Ø 8 mm |
| Pneumatic Control Port Diameter | Ø 4 mm |
| Electrical Interface | 1 mm sensor wire socket, 8 mm load current terminal |
| Stack Thickness Adjustment Range | up to 0.9 mm per MEA |
| Dimensions (L×W×H) | 465 × 175 × 242 mm |
| Net Weight | 13.5 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF12 |
| Active Area | 12 cm² |
| Piston Diameter | Ø100 mm |
| Mass | 6 kg |
| Max Contact Pressure | 2.5 N/mm² |
| Operating Temperature Range | −20 to 150 °C |
| Coolant–Cathode Outlet ΔT | ≤1 K at 5 A/cm² |
| Cooling/Heating Medium | External Liquid Circulator (not included) |
| Gas Inlet Fittings | Ø4 mm (fuel/air supply via Ø6 mm ports) |
| Electrical & Thermal Interface | Stainless Steel with Gold-Plated Contacts and FKM Seals |
| Actuation | Motorized 5/2 Solenoid Valve |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF25 |
| Instrument Type | Electrochemical Workstation Accessory |
| Current Range | ±5 A |
| Current Accuracy | ±0.1% of full scale |
| Potential Accuracy | ±15–32 µV |
| Potentiostatic Range | ±25 V |
| EIS Frequency Range | 10 Hz – 1 MHz (system-dependent, requires compatible potentiostat) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF50 |
| Active Area | 50 cm² |
| Pressure Control | Pneumatically Actuated, Continuously Adjustable |
| Temperature Compatibility | –50 °C to +250 °C (with optional TCU) |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Customization | Available for PEMFC, AEMFC, electrolysis, and metal–air cells |
| Accessories | CMD compression monitor, CSL current distribution scanner, DHRE_Pt reference electrode, HSE humidity sensors, flow-field customization, liquid-cooled/heated manifolds |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | SuSy300 |
| Output Power | 300 W (nominal) |
| DC Voltage Range | 16–21 V |
| Rated Current | 18 A |
| System Efficiency | 45% @ 300 W |
| Fuel | 99.9% H₂ + ambient air |
| H₂ Inlet Pressure | 2–20 bar |
| Startup Time | <3 s |
| Safety Monitoring | Integrated H₂ pressure & temperature sensors |
| Gas Port | 1/8" internal thread |
| Control Interface | SUB-D9 connector, RS-232 protocol |
| Dimensions | 244 × 155 × 180 mm |
| Weight | 3.9 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | SuSy500 |
| Rated Power | 500 W (DC) |
| Output Voltage Range | 24–32 V DC |
| Nominal Current | 18 A |
| System Efficiency | 45% at 500 W |
| Fuel | 99.9% H₂ + Ambient Air |
| H₂ Inlet Pressure | 2–20 bar |
| Startup Time | <3 s |
| Safety Sensors | Integrated H₂ pressure & temperature monitoring |
| Gas Interface | 1/8″ NPT internal thread |
| Control Interface | SUB-D9 connector, RS-232 protocol |
| Dimensions | 244 × 155 × 180 mm |
| Weight | 3.9 kg |