Binsfeld
Filter
Showing all 6 results
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT10K |
| Transmitter Dimensions | 25 mm × 41 mm × 64 mm |
| Transmitter Weight | 85 g |
| Operating Temperature | −30 °C to +85 °C |
| Battery Life | 24 h (9 V Li battery, 350 Ω bridge, 25 °C) |
| Excitation Voltage | 2.5 VDC ±0.1% |
| Supply Voltage (Transmitter) | 7.5–18 VDC |
| Transmit Current (Active) | 40 mA typical, 50 mA max |
| Transmit Current (Standby) | 4 mA typical, 5 mA max |
| Gain Range | 500–16,000 (6 selectable steps) |
| Frequency Response | 0–500 Hz (−3 dB at 500 Hz), adjustable low-pass filtering |
| Output Delay | 4.2 ms typical (500 Hz filter setting) |
| Sampling Rate | 2400 samples/sec |
| ADC Resolution | 14-bit |
| Output Options | ±10 VDC analog (field-adjustable gain 0.25× to 4.0×), RS-232 serial (DB9) |
| Transmission Band | 902–925 MHz |
| Line-of-Sight Range | ≥6 m (20 ft) |
| Centrifugal Tolerance | 3000 g (e.g., 5700 RPM on 102 mm shaft) |
| Strain Gauge Compatibility | Full-bridge, 350 Ω standard (1000 Ω optional) |
| Bridge Excitation | 2.5 VDC |
| Bias Error | ±0.25% of reading or ±0.16% FS (at gain = 4000, 25 °C) |
| Remote Control | IR-based, up to 3 m line-of-sight, enables channel selection, gain/FS adjustment, shunt calibration, and standby activation without disassembly |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TPM2 |
| Pricing | Upon Request |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TT |
| Pricing | Upon Request |
| Brand | Binsfeld |
|---|---|
| Country of Origin | USA |
| Model | TT-10K |
| Max Torque Capacity | 10,000 N·m |
| Torque Measurement Range | 0–10,000 N·m |
| Torque Resolution | 1% of full scale |
| Torsional Angle Range | 0–360° |
| Motor Power Rating | 1 kW |
| Operating Temperature | −30 °C to +85 °C |
| RF Frequency Band | 902–925 MHz (16 programmable channels) |
| Transmission Distance | Up to 6 m (20 ft) |
| Sampling Bandwidth | DC to 500 Hz (−3 dB) |
| ADC Resolution | 14-bit |
| Transmitter Power Supply | 7.5–18 VDC, max 50 mA @ 350 Ω bridge |
| Battery Life | 24 h (9 V Li battery, 25 °C, 350 Ω bridge) |
| Centrifugal Acceleration Tolerance | 3000 g |
| Output Options | ±10 VDC analog (field-adjustable), RS-232 digital |
| Remote Control Range | 3 m (10 ft) |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT-R |
| Sensor Input | Full-bridge strain gauge (350 Ω, optional other resistances), 4 VDC excitation |
| Strain Range | ±500 με (full-bridge, 4-arm, torsion or bending) |
| Resolution | 14-bit |
| Frequency Response | DC to 1000 Hz (–3 dB) |
| Operating Environment | –40 °C to +85 °C, 0–90% RH (non-condensing) |
| Power Supply | 11–16 VDC, nominal 0.5 A, max 2 A (AC option available) |
| Output Signals | Four isolated 4–20 mA analog outputs (torque, speed, power, direction) |
| Telemetry Architecture | Non-contact inductive power coupling and digital RF data transmission |
| Mechanical Configuration | Rotating torque ring (integrated transmitter) + stationary power ring & master control unit |
| Size Series | Outer diameters increment in 2-inch steps for scalable shaft diameter coverage |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT10K-LP |
| Operating Frequency | 903–925 MHz |
| Transmitter Dimensions | 17 mm × 26 mm × 51 mm |
| Transmitter Weight | 31 g |
| Battery Life (Active Mode) | 48 h (9 V Li battery, 350 Ω bridge, 25 °C) |
| Standby Current | 0.5 mA typical |
| Excitation Voltage | 3 VDC ±0.1% (bridge), 6–25 VDC (transmitter input) |
| Gain Range | 500–16,000 (6 selectable steps) |
| Bandwidth | 0–500 Hz (−3 dB at 500 Hz), programmable filtering |
| Output | ±10 VDC analog + RS-232 digital (DB9) |
| IP Rating | IP67 (transmitter with optional housing) |
| Operating Temperature | −30 to +85 °C |
| Resolution | 14-bit ADC |
| Bias Error | ±0.25% of reading (gain = 4000, 25 °C) |
| Signal Delay | 4.2 ms typical (500 Hz filter) |
| Sampling Rate | 2400 samples/sec |
| Strain Gauge Compatibility | Full-bridge, 350 Ω standard (1000 Ω supported) |
| Remote Control | IR-based, up to 3 m range, enables gain adjustment, shunt calibration, channel selection, and standby mode activation |
| Channel Capacity | 16 simultaneous systems |
| Centrifugal Acceleration Tolerance | 2000 g (steady-state) |