Generic
Filter
Showing 241–270 of 1032 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | DNA800 |
| Pricing | Available Upon Request |
| Origin | Shenzhen |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | DIT-KDY-125 |
| Price | Upon Request |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DSA100 |
| Price Range | USD 68,000 – 136,000 |
| Instrument Class | Dynamic Contact Angle Analyzer |
| Form Factor | Benchtop Laboratory System |
| Contact Angle Measurement Range | 0–180° |
| Contact Angle Accuracy | ±0.1° |
| Sample Stage Dimensions | 100 × 100 mm (adjustable height) |
| Optical Magnification | 0.7–4.5× (motorized zoom lens) |
| Surface/Interfacial Tension Range | 0.01–2000 mN/m |
| Surface/Interfacial Tension Accuracy | ±0.01 mN/m |
| Temperature Control Range | −30 to +400 °C (with optional thermostatted stages) |
| Humidity Control | Integrated chamber (10–95% RH, ±2% RH stability) |
| Imaging System | High-speed monochrome CMOS camera (1024 × 1024 px, 12-bit dynamic range, up to 300 fps) |
| Software Platform | ADVANCE v4.x with audit trail, user management, and 21 CFR Part 11 compliance modules |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RAD7 |
| Sampling Method | Active Sampling |
| Detection Range | 3.7–74,000 Bq/m³ (0.1–20,000 pCi/L) |
| Minimum Detectable Concentration | 3.7 Bq/m³ (0.1 pCi/L) |
| Sensitivity | 12.8 counts/min per Bq/m³ (air monitoring mode) |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DV3000 |
| Pricing | Upon Request |
| Origin | South Korea |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DVIO-I |
| Pricing | Available Upon Request |
| Natural Frequency | Vertical 1.2–1.5 Hz, Horizontal 1.5–1.7 Hz |
| Operating Pressure | 3–7 kgf/cm² (43–100 psi) |
| Pneumatic System | Dual-chamber air chamber with four or six high-stability elastomeric air springs |
| Leveling Mechanism | Three vacuum-actuated horizontal adjustment valves with sub-second response time |
| Table Structure | Triple-layer honeycomb core sandwich construction |
| Top Surface | 4.0 mm thick ASTM A240 430-series ferromagnetic stainless steel (low thermal expansion, μm/°C coefficient < 10.5) |
| Core | Steel hexagonal honeycomb with 0.25 mm wall thickness, 3.2 cm² cell area |
| Base Plate | 4.0 mm carbon steel with black oxide finish |
| Perimeter Walls | 2.0 mm carbon steel clad with high-damping polyethylene |
| Flatness | ±0.1 mm over 600 mm × 600 mm |
| Mounting Pattern | M6 threaded holes on 25 mm × 25 mm grid (edge offset: 37.5 mm), each with cylindrical isolation cup seal |
| Thickness Options | 50 / 100 / 200 / 300 mm |
| Optional Configurations | Imperial hole pattern (¼"-20), custom dimensions up to 3600 mm × 1500 mm |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DRS2170 |
| Pricing | Upon Request |
| Origin | Shenzhen |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | DIT-ZK-110 |
| Price | Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | EEDs |
| Pricing | Available Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 81180 |
| Price | Upon Request |
| Display | LCD |
| Operating Frequency | 200 kHz (Beam Width: 24°) |
| Depth Measurement Range | 0.6–80 m |
| Waterproof Rating | IP68 (50 m submersion rated) |
| Power Supply | 9 V alkaline battery (IEC 6F22 / ANSI 006P) |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ECO nCLD63 |
| Price Range | USD 14,000 – 42,000 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | A-21ZX |
| Instrument Type | Fixed-Mount |
| Measurement Range | 0–10 ppm |
| Detection Limit | 0.01 ppm (resolution) |
| Response Time | <60 seconds (T90) |
| Zero Drift | <±0.02 ppm/week |
| Resolution | 0.01 ppm |
| Dimensions | 110 × 220 × 64 mm (L×W×H) |
| Weight | 570 g |
| Power Supply | 12–24 VDC, 500 mA |
| Operating Temperature | 0–40 °C |
| Relative Humidity | 0–95% RH (non-condensing) |
| Frequency Range | 3 kHz – 30 MHz |
|---|---|
| Electric Field Range | 0.02–1000 V/m |
| Magnetic Field Range | 0.6 mA/m – 300 A/m |
| Resolution Bandwidth | 1 kHz (min) |
| Dynamic Range | 80 dB |
| Battery Life | Up to 12 h (rechargeable Li-ion) |
| Probe Dimensions | 92 × 92 × 109 mm |
| Compliance | Designed for IEC 61786-1, IEEE C95.3, and EN 50492 assessment workflows |
| Origin | Japan |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | EJ Series |
| Pricing | Upon Request |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MED-1 |
| Price | €200,000 |
| Key | Origin: China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | DHP3D / DHP2D / DHP1D |
| Temperature Range | R.T.+5 to 60 °C |
| Temp. Uniformity | ±1 °C at 37 °C |
| Temp. Stability | ±0.5 °C |
| Chamber Volume | 201 L (DHP3D) |
| Power Rating | 0.6 kW |
| Construction | Stainless Steel Interior |
| Control System | PID Digital Temperature Controller |
| Safety Features | Independent Over-Temperature Protection & Short-Circuit Protection |
| Compliance | YY0027-90 |
| Key | Load Capacity: 100 kg |
|---|---|
| Table Dimensions (Vertical) | 50×20×50 cm (L×H×W) |
| Table Dimensions (Horizontal) | 50×26.5×50 cm (L×H×W) |
| 台面尺寸 (Table Top) | 50×50 cm (L×W) |
| Vibration Axes | Vertical (Z-axis) and Horizontal (X/Y-axes) |
| Frequency Range | 1–600 Hz (standard), up to 5000 Hz (customizable) |
| Sweep Mode | Linear/logarithmic bidirectional sweep with user-defined start/stop frequencies and dwell time |
| Programmable Mode | 15-segment profile, each segment configurable for frequency and duration, repeatable |
| Tuning Mode | Frequency tuning within range under acceleration ≤20 g and displacement ≤5 mm p-p |
| Octave Mode | 15-step octave-up, octave-down, or up-down-up sequences |
| Logarithmic Mode | Three-directional log-sweep (low→high, high→low, low→high→low), repeatable |
| Motor Power | 2.2 kW |
| Peak Displacement | 0–5 mm p-p (adjustable) |
| Peak Acceleration | 20 g (max) |
| Waveform | Sinusoidal |
| Time Resolution | 1 s (programmable) |
| Frequency Display Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Power Supply | 220 V ±20%, 5 A max |
| Acceleration–Displacement Relationship | aₚₑₐₖ = 0.002 × f² × D (with aₚₑₐₖ in g, f in Hz, D in mm p-p) |
| Dimensions | 400 × 300 mm |
|---|---|
| Heating Power | 3 kW |
| Max Operating Temperature | 400 °C |
| Input Voltage | AC 220 V / 50 Hz |
| Construction | Cold-rolled steel housing with powder coating |
| [Origin | China |
|---|---|
| Type | Forced-Air Convection Drying Oven |
| Models | SD101-003DB / SD101-005DB / SD101-1DB / SD101-2DB |
| Chamber Volume | 27 L to 125 L |
| Temperature Range | Ambient +20 °C to 200 °C |
| Temperature Uniformity | ±2.5% (per JB/T 5520–1991) |
| Temperature Fluctuation | ±0.5 °C |
| Control System | PID Digital Temperature Controller |
| Safety Features | Independent Over-Temperature Cut-Off & Short-Circuit Protection |
| Construction | Vertical Configuration with Stainless Steel Interior Chamber |
| Power Input | 0.7 kW to 1.3 kW] |
| Key Features | Electromagnetic excitation |
|---|---|
| Max. load capacity | 100 kg |
| Frequency range | 1–600 Hz (standard), up to 5000 Hz (optional) |
| Max. acceleration | 20 g |
| Adjustable amplitude | 0–5 mm peak-to-peak |
| Power | 2.2 kW / 3.8 kW |
| Input voltage | 220 V / 380 V AC |
| Platform dimensions | 50 cm × 50 cm (customizable) |
| Unit footprint options | 50×20×50 cm, 50×25×20 cm, 50×25×50 cm (dual-platform configurations available) |
| Key | Table Surface Dimensions: 350×350 / 500×500 / 750×750 / 1000×1000 mm |
|---|---|
| Shaker Body Dimensions (Vertical) | 500×200×500 mm |
| (Horizontal) | 500×250×500 mm |
| Vibration Axes | Vertical (Y) + Horizontal (X) |
| Frequency Range | 1–3000 Hz, Resolution: 0.01 Hz |
| Peak-to-Peak Displacement | 0–5 mm adjustable |
| Maximum Load Capacity | 75 kg |
| Peak Sinusoidal Force | 1500 kgf (≈14.7 kN) |
| Maximum Acceleration | ≤20 g |
| Waveform | Sine (full- or half-wave) |
| Programmable Test Segments | 15 |
| Sweep Modes | Linear, Logarithmic, Step, Octave |
| Time Setting Range | 0–999,999 s |
| Power Consumption | 3.8 kW |
| Input Voltage | 380 V ±20%, 3-phase |
| Rated Current | 10 A |
| Operating Temperature | −10°C to +60°C, Humidity ≤95% RH (non-condensing) |
| Recommended Ambient | ≤28°C with adequate ventilation |
| Tabletop Dimensions | 500 × 500 mm |
|---|---|
| Vibration Axis | Vertical (Z-axis only) |
| Maximum Load Capacity | 100 kg |
| Frequency Range | 1–400 Hz |
| Sweep Frequency Range | 1–400 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Maximum Acceleration | 20 g (peak) |
| Time Control Resolution | 1 second, programmable up to 1 year |
| Waveforms | Sine, Half-sine |
| Amplifier Power Rating | 2.2 kW |
| Input Voltage | 220 V ±10% AC, 50/60 Hz |
| Maximum Current Draw | 5 A |
| Frequency Display Resolution | 0.01 Hz |
| Overall Dimensions (H×W×D) | 160 × 500 × 500 mm |
| Compliance | CE-marked |
| Key | Frequency Range: 5–150 Hz |
|---|---|
| Vibration Modes | Sine, Random, Swept Sine (Linear & Logarithmic, Bidirectional Sweep) |
| Acceleration | 50 m/s² (RMS), 300 m/s² (Peak) |
| Displacement | 51 mm (p-p) |
| Stroke Duration for Pulse | 18 ms (configurable) |
| Magnetic Flux Leakage | ≤1 mT |
| Orientation | Vertical & Horizontal |
| Configuration | Dual-Head Electromagnetic Shaker with Shared Power Amplifier & Controller |
| Automatic Power & Blower Switching | Integrated Electro-Mechanical Relay System |
| Compliance | Designed for ISO 10816, ASTM D999, IEC 60068-2-6/2-64, and GLP/GMP-aligned test environments |
| Origin | Germany |
|---|---|
| Manufacturer | Elementar Analysensysteme GmbH |
| Type | vario Series |
| Compliance | ASTM D5373, ISO 10694, USP <28>, EPA Method 405.1, EN 15148 |
| Detection Range | C/H/N/S/O/Cl |
| Sample Mass | 0.1 mg – 800 mg |
| Combustion Temperature | up to 1200 °C (1800 °C peak with tin foil) |
| Gas Supply | He or Ar carrier gas, O₂ for combustion |
| Data System | Windows-based software with audit trail, 21 CFR Part 11 optional |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Models | Elliot E4500, E4100, E3500, E3200 |
| Price Range | USD 68,000 – 136,000 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ELMA S 30 H |
| Instrument Type | Dedicated Benchtop Ultrasonic Cleaner |
| Tank Capacity | 2.75 L |
| Ultrasonic Frequencies | 37 kHz / 80 kHz (Dual-Frequency Operation) |
| Ultrasonic Power Output | 100 W (Adjustable Range: 40–100% in 10% increments) |
| Heating Temperature Range | 30–80 °C (Adjustable in 1 °C steps) |
| Timer Range | 1–30 min (Predefined presets: 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 min |
| Sound-Dampening Lid | Integrated Acoustic Lid with Safety Interlock |
| Drain & Fill | Automatic Drain Valve with Optional Fill Function |
| Sweep Frequency Mode | Enabled via Dedicated Toggle |
| Degassing Mode | Manual & Auto-Activated (10-min timed cycle, triggered by ≥2 s press during sonication) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Model 130 |
| Pricing | Upon Request |
| Brand | Generic |
|---|---|
| Origin | Imported |
| Distributor Type | Authorized Distributor |
| Temperature Range | −70 °C to +150 °C (selectable low-temp stages: −20 °C / −40 °C / −60 °C / −70 °C |
| high-temp stages | +100 °C / +150 °C) |
| Internal Dimensions (L×W×H, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (L×W×H, cm) | 120×165×110 to 190×210×185 |
| Transfer Time (typ.) | <15 s between zones |
| Compliance | Designed per IEC 60068-2-14, ASTM D5229/D570, MIL-STD-810H Method 503.7 |
| Temperature Range | –40 °C to +150 °C (standard) |
|---|---|
| Humidity Range | 30–98 % RH (standard) |
| Temperature Resolution | 0.01 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Resolution | 0.1 % RH |
| Humidity Deviation | ≤ ±2.5 % RH |
| Cooling Rate | 0.7–1.0 °C/min |
| Heating Rate | 2.0–3.0 °C/min |
| Control System | TEMI880 color LCD touchscreen programmable controller |
| Power Supply | 380 V ±5 %, 50 Hz, 3P+N+G (customizable to 220 V) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with electrostatic powder coating |