HM&M (Japan)
Filter
Showing all 3 results
| Brand | HM&M (Japan) |
|---|---|
| Origin | Japan |
| Equipment Type | Wet Bead Mill |
| Model | Apex Mill WAM |
| Sample Applicability | Hard, brittle, and agglomerated materials |
| Feed Particle Size | >10 µm |
| Discharge Particle Size | <10 µm (down to 20 nm after processing) |
| Batch Processing Volume | 60 mL |
| Bead Size Range | Φ15 µm – Φ0.3 mm |
| Bead Separation Surface Area | 3–5× that of conventional separators |
| Maximum Slurry Viscosity | 2,000 mPa·s |
| Stirrer Tip Speed | 6–12 m/s |
| Motor Power Range | 2.2–55 kW |
| Chamber Volume Range | 0.15–30 L |
| Key | Brand: HM&M (Japan) |
|---|---|
| Origin | Japan |
| Model | Ultra Apex Mill |
| Instrument Type | Bead Mill / Sand Mill |
| Sample Applicability | Hard Materials |
| Feed Particle Size | <15 µm |
| Discharge Particle Size | <1 µm |
| Final Output Particle Size | <100 nm (down to 20 nm) |
| Batch Processing Volume | 60 mL |
| Bead Size Range | Φ15 µm – Φ1 mm |
| Bead Separator Type | Centrifugal |
| Peripheral Speed of Separator | 8–12 m/s |
| Compliance | Designed for GMP/GLP-aligned cleanroom and pharmaceutical-grade processing |
| Key | Brand: HM&M (Japan) |
|---|---|
| Origin | Japan |
| Equipment Type | Vertical Bead Mill |
| Model | Ultra Apexmill |
| Grinding Media Size Range | Φ15 µm – Φ1 mm |
| Feed Particle Size | >10 µm |
| Final Particle Size | <10 µm (down to 20 nm in optimized slurry dispersion) |
| Batch Processing Volume | 60 mL |
| Drive Motor Power | 2.2–55 kW (model-dependent) |
| Bead Separation Principle | Centrifugal Bead Separator (Patented) |