Malvern PANalytical
Filter
Showing 1–30 of 51 results
| Brand | Malvern Panalytical |
|---|---|
| Origin | Canada |
| Manufacturer | Claisse (a Malvern Panalytical company) |
| Instrument Type | Automated Flux Fusion System |
| Compliance | Designed for ISO/IEC 17025, ASTM E2627, ASTM D5630, USP <731>, and GLP/GMP environments |
| Certifications | CE, CSA, UL listed |
| Operating Modes | Fully automated electronic + gas-controlled fusion, programmable ramp/hold thermal profiles |
| Crucible Capacity | Supports Pt/Au, Pt/Rh, and graphite crucibles (standard 30–50 mL) |
| Maximum Temperature | Up to 1200 °C (LeNeo/TheOx), 1100 °C (Eagon 2), 1050 °C (M4) |
| Gas Compatibility | Argon, nitrogen, air, or custom mixed atmospheres (optional mass flow controller) |
| Safety | Integrated fume extraction interface, overtemperature cut-off, door interlock, real-time CO/NOₓ monitoring (optional) |
| Connectivity | Ethernet, RS-232, USB |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | DDCOM |
| Instrument Type | Single-Crystal X-ray Diffractometer |
| X-ray Source | 30 W Air-Cooled Cu Anode Tube |
| Scan Speed | Up to 200× Faster Than Conventional θ-Scanning |
| Orientation Measurement Time | Full 3D Lattice Orientation Determined in ≤10 s |
| Angular Resolution | ≤0.01° (0.01 degree) |
| Sample Capacity | Wafers 2–12 inches |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments, compatible with GLP/GMP documentation workflows |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | 2830 ZT |
| Instrument Type | Floor-standing |
| X-ray Tube Power | 4 kW |
| Detector Configuration | Sequential Multi-channel |
| Analyzable Elements | B, C, N, O, F, Mg, TiSiₓ, CoSiₓ, WSiₓ |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | Aeris |
| Instrument Type | Powder X-ray Diffractometer |
| Form Factor | Benchtop |
| Power Stability | < 0.0001 (unitless relative stability, typical for high-stability X-ray tube voltage/current regulation) |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Aeris Cement Edition |
| Pricing | Upon Request |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | Aeris HCSC |
| Instrument Type | Powder X-ray Diffractometer |
| Form Factor | Benchtop |
| Brand | Malvern PANalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | Axios FAST |
| Instrument Type | Floor-standing |
| Instrument Configuration | Simultaneous Multi-Channel WDXRF |
| X-ray Tube | SST-mAX with 160 mA high-power capability |
| Analyzable Elements | Up to 28 elements (Na to U) |
| Detection Range | ppm to 100 wt% |
| Sample Throughput | Up to 168 samples unattended |
| Minimum Measurement Time per Sample | 2 seconds |
| Optional Configurations | Up to 4 goniometers, HiPer channel for light elements (Na–F), anode materials (Rh, Cr, Mo, Au) |
| Compliance | Designed for GLP/GMP environments |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Canada |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | CNA |
| Pricing | Available Upon Request |
| Brand | Malvern Panalytical |
|---|---|
| Country of Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | Empyrean |
| Instrument Type | Powder X-ray Diffractometer |
| Configuration | Floor-Standing |
| Power Consumption | 0.0001 kW |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Model | Empyrean |
| Instrument Type | Powder X-ray Diffractometer |
| Configuration | Floor-standing |
| Power Consumption | 0.0001 kW |
| Core Technology | MultiCore Optics (iCore/dCore) |
| Detector Technology | Hybrid Pixel Array (PIXcel3D / GaliPIX3D) |
| Sample Flexibility | Powder, Thin Film, Nanomaterials, Bulk Solids |
| Compliance Framework | GLP-ready, PreFIX modular architecture, ISO/IEC 17025-compatible workflow support |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Epsilon 1 ISO 13032 |
| Configuration | Benchtop |
| Industry Application | Energy & Petrochemicals |
| Elemental Range | Na to Am |
| Quantification Range | ppm to % |
| Energy Resolution | 135 eV |
| Repeatability | High |
| Detector | High-Resolution Silicon Drift Detector (SDD) |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | Epsilon 4 |
| Form Factor | Benchtop / Floor-standing Configurable |
| Application Scope | Universal |
| Elemental Range | F–Am (C–Am with optional configuration) |
| Quantification Range | 0.01 ppm – 100 wt% |
| Energy Resolution | ~135 eV (at Mn Kα, 5.9 keV) |
| Repeatability | As low as 0.02% RSD (relative standard deviation) |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Epsilon Xflow |
| Form Factor | Benchtop or Floor-Standing |
| Industry-Specific Application | Energy & Chemical Processing |
| Elemental Range | Na (Z=11) to Am (Z=95) |
| Quantification Range | 1 ppm to 100% w/w |
| Energy Resolution | <145 eV at 5.9 keV (1000 cps) |
| Repeatability | Concentration-dependent |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Epsilon1 |
| Form Factor | Benchtop |
| Industry Application | Energy & Chemicals |
| Elemental Range | Na (Z=11) to Am (Z=95) |
| Quantification Range | 1 ppm to 100% w/w |
| Energy Resolution | <145 eV at Mn Kα (5.9 keV, 1000 cps) |
| Repeatability | Concentration-dependent, compliant with ISO 8258 and ASTM E1621 for precision validation |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Canada |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | FORJ |
| Sample Capacity | Up to 12 samples per run (dual crucible & mold carrier configuration) |
| Maximum Operating Temperature | 1250 °C |
| Temperature Control Accuracy | ±2.5 °C at 1050 °C |
| Dimensions (L×W×D) | 71 cm × 102 cm × 72 cm |
| Brand | Malvern Panalytical |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FORJ |
| Quotation | Upon Request |
| Sample Capacity | 6–12 fusion beads per run |
| Maximum Operating Temperature | 1250 °C |
| Temperature Control Accuracy | ±1 °C |
| Dimensions (L×W×D) | 1020 × 720 × 710 mm |
| Brand | Malvern Panalytical |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Hydro Insight |
| Instrument Type | Dynamic Imaging System |
| Measurement Range (Standard Magnification) | 1–300 µm |
| Measurement Range (Low Magnification) | 10–800 µm |
| Dispersion Method | Wet Dispersion |
| Camera Resolution | 5 MP (2592 × 1944 pixels, 2.2 µm pixel size) |
| Measured Parameters | Particle Images, Shape Metrics (31 shape descriptors), Width, Elongation, Aspect Ratio, Circularity, Convexity, Solidity, etc. |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | Insitec |
| Pricing | Available upon Request |
| Brand | Malvern Panalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Mastersizer 3000 |
| Dispersion Method | Dry & Wet Dispersion |
| Instrument Type | Laboratory Laser Diffraction Analyzer |
| Measurement Range | 0.01–3500 µm |
| Repeatability | <1% RSD |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Mastersizer 3000+ |
| Dispersion Method | Dry and Wet Dispersion |
| Instrument Type | Laboratory Laser Diffraction Particle Size Analyzer |
| Measurement Range | 0.01–3500 µm |
| Repeatability | <1% RSD |
| Measurement Time | <10 s |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Model | Mastersizer 3000+ |
| Dispersion Method | Dry & Wet |
| Instrument Type | Laboratory Laser Diffraction Particle Size Analyzer |
| Measurement Range | 0.01–3500 µm |
| Repeatability | <1% RSD |
| Measurement Time | <10 s |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Laboratory Laser Diffraction Particle Size Analyzer |
| Measurement Range | 0.1–1000 µm |
| Repeatability | <1% RSD |
| Measurement Time | <10 seconds per analysis |
| Dispersion Method | Dry and Wet Dispersion |
| Data Acquisition Rate | 10 kHz |
| Laser Source | Stabilized He-Ne Laser (632.8 nm) |
| Brand | Malvern PANalytical |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | MicroCal PEAQ-DSC Automated |
| Sample Throughput | Up to 50 samples per unattended run |
| Instrument Type | Differential Scanning Calorimeter (DSC) |
| Temperature Range | –10 °C to 130 °C (expandable) |
| Sample Format | Standard 96-well microplate compatibility |
| Regulatory Compliance | Designed for 21 CFR Part 11 and EU GMP Annex 11 compliance support |
| Brand | Malvern Panalytical |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | MicroCal PEAQ-DSC |
| Sample Throughput | Multiple samples per run (manual loading) |
| Instrument Type | Differential Scanning Calorimeter (DSC) |
| Temperature Range | –10 °C to 130 °C (expandable) |
| Brand | Malvern Panalytical |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | MicroCal PEAQ-ITC Automated |
| Measurement Mode | Isothermal Titration Calorimetry (ITC) |
| Temperature Range | 2 °C to 80 °C |
| Sample Volume Requirement | As low as 10 μg protein per experiment |
| Throughput | Fully automated operation supporting up to four 96-well plates per unattended run |
| Detection Sensitivity | Sub-micromolar to picomolar dissociation constants (KD = 10⁻² – 10⁻¹² M) |
| Cell Material | Chemically resistant nickel-based alloy |
| Cell Geometry | Optimized coin-shaped reaction cell for efficient mixing and minimal sample dispersion |
| Brand | Malvern PANalytical |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | MicroCal PEAQ-ITC |
| Measurement Mode | Isothermal Titration Calorimetry (ITC) |
| Temperature Range | 2 °C to 80 °C |
| Sample Consumption | As low as 10 µg protein per experiment |
| Affinity Range | 10² M⁻¹ to 10¹² M⁻¹ (K<sub>D</sub> = 10⁻² to 10⁻¹² M) |
| Compatibility | Aqueous and non-aqueous solvents |
| Cell Material | Chemically resistant nickel-based alloy |
| Upgrade Path | Compatible with MicroCal PEAQ-ITC Automated platform |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Morphologi 4 |
| Instrument Type | Static Image-Based Particle Analyzer |
| Lens Count | 5 |
| Measurement Range | 0.5 µm – 1300 µm |
| Sample Dispersion Methods | Dry Powder Dispersion and Wet Dispersion |
| Image Resolution | 18 MP |
| Measured Morphological Parameters | Aspect Ratio, Circularity, Convexity, Extent, Hardness |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Morphologi 4-ID |
| Application Sector | Pharmaceutical |
| Instrument Type | Static Imaging Analyzer |
| Number of Objective Lenses | 5 |
| Measurement Range | 0.5 µm – 1300 µm |
| Dispersion Methods | Dry Powder Dispersion and Wet Dispersion |
| Image Resolution | 18 Megapixels |
| Measured Morphological Parameters | Aspect Ratio, Circularity, Convexity, Elongation, Hardness |
| Brand | Malvern Panalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | NS300 |
| Pricing | Available upon Request |
| Brand | Malvern PANalytical |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | NanoSight Pro |
| Price | Upon Request |
| Particle Size Range | 10 nm – 1000 nm |
| Temperature Control Range | 5°C below ambient to 70°C |
| Measurement Principle | Nanoparticle Tracking Analysis (NTA) |
| Sample Concentration Range | 1×10⁶ – 1×10⁹ particles/mL |
| Minimum Sample Volume | 250 µL |
| Laser Wavelengths | 405 nm (<70 mW), 488 nm (<55 mW), 532 nm (<60 mW), 642 nm (<50 mW) |
| Detection Camera | High-sensitivity sCMOS (USB 3.0) |
| Compliance | Class 1 Laser Product (BS EN 60825-1:2014), EMC Directive (EN IEC 61326-1:2021), Low Voltage Directive (IEC 61010-1:2010 + AMD1:2016) |
| Dimensions (W×D×H) | 34 × 35 × 25 cm |
| Weight | 11 kg (instrument), 1.6 kg (laser module) |
| Power Supply | AC 110–240 V, 50–60 Hz, 4.0 A |
| Operating Environment | ≤80% RH at 31°C, linearly decreasing to 50% RH at 40°C |