Oelabs
Filter
Showing all 6 results
| Brand | Oelabs |
|---|---|
| Origin | Shanghai, China |
| Model | CVOFG-100-XX-YY |
| SLM Resolution | 4160×2464 (GAEA-2) / 1920×1080 (Pluto-2.1 or LETO-3) |
| Wavelength Range | 420–650 nm / 650–1100 nm / 1400–1700 nm |
| Pixel Pitch | 3.74 µm (GAEA-2) / 6.4 µm (LETO-3) / 8 µm (Pluto-2.1) |
| Phase Modulation Range | 0–2π |
| Amplitude Modulation Ratio | 1:6 |
| Polarization Ratio Control Range | 0–2π |
| Ellipticity Control Range | −π/2 to +π/2 |
| Enclosure Dimensions | 750 × 604 × 329 mm (aluminum chassis) |
| Interface | HDMI (SLM addressing), USB (calibration & motor control), RS-232 / TTL (optional motor synchronization) |
| Software Support | MATLAB R2009b+, LabVIEW 8.6+, GUI-based Configuration Manager |
| Brand | Oelabs |
|---|---|
| Origin | Taiwan |
| Model | Hall8686 |
| Magnetic Field Strength | 0.53 T |
| Temperature Range | 77 K–423 K (optional up to 623 K) |
| Temperature Accuracy | ±0.5 K |
| Current Output | 1 nA–100 mA |
| Voltage Resolution | down to nV level (up to 300 V) |
| Carrier Concentration Range | 10⁷–10²¹ cm⁻³ |
| Mobility Range | 1–10⁷ cm²/(V·s) |
| Resistivity Range | 10⁻⁵–10⁷ Ω·cm |
| Sample Size | 5–15 mm diameter, thickness ≤1 mm |
| Sample Holder | proprietary spring-loaded four-point probe fixture |
| Compatible Materials | Si, ZnO, SiGe, SiC, GaAs, InGaAs, InP, GaN (n-type and p-type) |
| Brand | Oelabs |
|---|---|
| Origin | Shanghai, China |
| Model | SCS-4000 |
| Stretching Accuracy | ±0.2 µm |
| Max. Stretch Distance | 50 mm |
| Stretch Speed Range | 0.2–10,000 µm/s |
| Fiber Clamping Diameter | φ0.1–0.5 mm |
| Torch Axial Scan Amplitude | 0–20 mm |
| Torch Scan Speed | 0–4 mm/s |
| H₂ Flow Rate | 0–200 sccm (adjustable) |
| O₂ Flow Rate | 0–200 sccm (adjustable) |
| Detector Options | InGaAs (850–1600 nm), Si (400–1000 nm) |
| Light Source Options | 1310/1550 nm FP Laser, 1 mW |
| Packaging Temperature Range | 0–130 °C |
| Power Supply | 220 V, 6 A |
| Brand | Oelabs |
|---|---|
| Origin | Shanghai, China |
| Model | SCS-4000-B |
| Core/Cladding Diameters Supported | 105/125 µm, 200/220 µm, 400/440 µm, 600/660 µm |
| Numerical Aperture Compatibility | 0.11, 0.22, 0.37, 0.48 |
| Taper Configuration Options | 1×2, 1×3, 1×7, (N+1)×1, N×M (N = 2–7) |
| Heating Source | Hydrogen-Oxygen Flame |
| Control Architecture | PC-based Sequential Timing Control |
| Power Handling Capacity | Watt-level (dependent on fiber core geometry and coating integrity) |
| Customization Capability | Post-delivery process adaptation and secondary development support |
| Brand | Oelabs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SCS-4000-ST |
| Pricing | Upon Request |
| Tapering Precision | ±0.2 µm |
| Stretching Speed Range | 0.2–10,000 µm/s |
| Max Bilateral Stretching Distance | 80 mm |
| Fiber Clamping Diameter | φ0.1–0.5 mm |
| Flame Axial Oscillation Range | 0–20 mm |
| Flame Translation Speed | 0–4 mm/s |
| H₂ Flow Rate | 0–500 SCCM (adjustable) |
| O₂ Flow Rate | 0–200 SCCM (adjustable) |
| Detector Options | InGaAs (800–1700 nm), Si (400–1000 nm), Ge (1000–1800 nm) |
| Light Sources | 1310/1550 nm FP Laser (1 mW), 633 nm HeNe (2 mW), 850/1310 nm Multimode LD |
| Packaging Temperature Range | 0–200 °C |
| Power Supply | 220 V AC, 6 A |
| Brand | Oelabs |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SCS-4000-T |
| Price | USD 4.82M (FOB Shanghai) |
| Single-Mode Fiber Taper Range | 9 µm → 1 µm (or finer) |
| Multimode Fiber Taper Range | 400–62.5 µm & 600–200 µm (or finer) |