OEM / Private Label
Filter
Showing 1–30 of 37 results
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Compliance | GB/T 16491, GB/T 1040, GB/T 2790–2792, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 17200 |
| Load Cell Accuracy | ±0.03% F.S. |
| Resolution | 1/100,000 full scale |
| Travel Protection | Mechanical & software-based limit control |
| Encoder | 2500 PPR AC servo motor with Panasonic drive |
| Drive System | Precision ground ball screw + linear guideways |
| Data Acquisition | PC-based real-time curve plotting, peak hold, auto-stop on break, overload protection, unit conversion, report generation |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Cell Accuracy | ±0.03% FS |
| Dynamic Overload Capacity | 150% of rated capacity |
| Position Resolution | 1/100,000 full scale |
| Encoder Resolution | 2500 pulses/rev |
| Drive Motor | Panasonic AC servo motor |
| Motion System | Precision preloaded ball screw + linear guideways |
| Thermal Compensation | Built-in automatic temperature compensation |
| Safety Features | Stroke limit switches, overload alarm, break-stop function |
| Compliance | ASTM E4, ASTM D638, ISO 527, ISO 178, ISO 1183, GB/T 1040, GB/T 9341 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable (OK-TH Series) |
| Temperature Range | -70 °C to +150 °C (selectable variants: 0 °C, -20 °C, -40 °C lower limits) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH or 10–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | ~4.0 °C/min (heating), ~1.0 °C/min (cooling) |
| Construction | Interior & Exterior – SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Port | One Ø50 mm test port (left side) |
| Refrigeration | Hermetic low-noise dual-stage compressor system with R404A/R23 eco-refrigerants |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C (selectable sub-ranges A–D) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigerant | R404A/R23 (environmentally compliant) |
| Controller | Color TFT touchscreen, bilingual (English/Chinese), GLP-compliant data logging interface |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Test Port | One 50 mm diameter port (left side) |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| External Dimensions (W×H×D) | 100×165×100 cm to 180×200×180 cm |
| Temperature Range | -70 °C to +150 °C (configurable in four standard tiers) |
| Humidity Range | 20–98 %RH (optional extension to 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ≈4.0 °C/min |
| Refrigeration System | Hermetic dual-stage compressor with eco-friendly R404A/R23 refrigerant blend |
| Control Interface | Full-color LCD touchscreen controller with bilingual (English/Chinese) UI |
| Construction Material | Interior & exterior panels — AISI 304 stainless steel |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film for anti-fog observation |
| Test Port | One Ø50 mm pass-through port (left side) |
| Standard Accessories | Two-tier 304 stainless steel shelves, four swivel casters with leveling feet, 2.5 m power cord (3-phase 5-wire, AC 380 V ±5 %, 50 Hz ±0.5 Hz) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 2,650 (excl. tax & freight) |
| Temperature Range | -40°C to +150°C (standard) |
| Humidity Range | 20%–98% RH |
| Temperature Uniformity | ±0.5°C (at 25°C, unloaded) |
| Humidity Uniformity | ±3% RH (at 60% RH, unloaded) |
| Ramp Rate | 1–3°C/min (air average, load-dependent) |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2021, MIL-STD-2164A |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 2,600 (FOB) |
| Compliance | GB/T 2423.1–1989, GB/T 2423.2–1989, IEC 60068-2-1, GJB 1032–1990, MIL-STD-2164A |
| Refrigerant | R404A (CFC-free) |
| Noise Level | <60 dB(A) |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Control System | PID-based BTHC (Balanced Temperature & Humidity Control) |
| Power Optimization | ~30% energy reduction vs. conventional designs |
| Calibration | NIST-traceable third-party metrology certificate included |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (approx.) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 3,100 (FOB Reference) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | USD 12,500 (FOB) |
| Test Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Operating Temperature Range | +5°C to 60°C |
| Spray Mode | Continuous or Cyclic Programmable |
| Chamber Material | High-Purity Grey PVC (Acid/Alkali Resistant, UV-Stabilized) |
| Saturated Air Tank | Grey PVC Cylindrical Design |
| Viewing Window | 5 mm Thick Acrylic, 100° Angled Roof Geometry |
| Sample Rack | V-Shaped PVC Support with 10 mm O-Ring Glass Rods (15°–30° Adjustable Tilt) |
| Nozzle Material | Fused Quartz Glass, Bernoulli-Optimized Orifice |
| Rated Nozzle Lifetime | ≥10,000 h (Under Normal Maintenance & NaCl Solution Use) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,000–4,500 (FOB, subject to configuration) |
| Temperature Range | −70°C to +180°C (standard models) |
| Humidity Range | 20–98% RH |
| Control Accuracy | ±0.5°C / ±2.5% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Compliance | GB/T 2423.1, GB/T 2423.2, IEC 60068-2-1, MIL-STD-2164A, GJB 1032 |
| OK-TH Series Temperature and Humidity Controlled Environmental Test Chamber (Standard Models | OK-TH-80 to OK-TH-1000) |
|---|---|
| Brand | OEM / Private Label |
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | -70 °C to +150 °C (configurable in 4 grades: A/B/C/D) |
| Humidity Range | 20–98 %RH (optional: 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate (Heating) | ~4.0 °C/min |
| Ramp Rate (Cooling) | ~1.0 °C/min |
| Refrigeration System | Hermetic low-noise dual-stage compressor with eco-friendly refrigerants R404A/R23 |
| Control System | Full-color LCD touchscreen controller with bilingual (EN/CN) interface |
| Construction Material | Interior & exterior walls — SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with embedded conductive film |
| Port | One 50 mm diameter test port (left side) |
| Standard Accessories | Two-tier SUS#304 shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 12,500–18,900 (FOB) |
| Temperature Range (Hot Zone) | RT to +150 °C |
| Temperature Range (Cold Zone) | RT to −65 °C |
| Sample Basket Dimensions (W×H×D) | 15×15×15 cm / 20×15×20 cm / 30×20×30 cm |
| Max. Sample Weight | 2 kg |
| Thermal Transfer Time | ≤10 s |
| Temperature Recovery Time | ≤5 min |
| Control Accuracy | ±0.5 °C |
| Cooling Medium Options | Silicone Oil / Glycol-Water Solution / Chilled Water / Specialized Heat Transfer Fluid |
| Drive Mechanism | Pneumatically Actuated Dual-Axis Positioning System |
| Programmable Cycles | Up to 9999 |
| Memory Capacity | 100 User-Defined Test Profiles |
| Communication Interface | RS-232C with PC Integration Support |
| Refrigerant | HFC-based Eco-Friendly Refrigerant |
| Cooling Method | Optional Air-Cooled or Water-Cooled Condensation System |
| Compliance | MIL-STD-810G, IEC 60068-2-14, JIS Z 8702 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C (configurable models) |
| Humidity Range | 5–98 %RH (standard 20–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigerant | R404A/R23 (ozone-friendly) |
| Construction | AISI 304 stainless steel (inner & outer chamber) |
| Control Interface | Full-color TFT touch screen with bilingual (EN/CN) OS |
| Test Port | Ø50 mm, left-side, sealed feedthrough |
| Compliance | MIL-STD-810G, IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Cyclic Damp Heat), GB/T 2423.1–2423.4, GJB 150.3/150.4 |
| Brand | OEM / Private Label |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported Components |
| Price | USD 3,100 (FOB Shanghai) |
| Temperature Range | −65 °C to +150 °C |
| Humidity Range | 20–95 % RH |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Heating Rate | ≥2.5 °C/min (from 20 °C to 85 °C in ≤60 min, no load) |
| Cooling Rate | ≥1.0 °C/min (from 20 °C to −40 °C in ≤70 min, no load, air/water-cooled) |
| Refrigerant | R404A/R23 |
| Compressor | Hermetic Scroll (Embraco or Copeland) |
| Insulation | 100 mm High-Density Glass Wool + Polyurethane Foam |
| Inner Chamber Material | SUS304 Mirror-Finish Stainless Steel |
| Outer Casing | Powder-Coated Cold-Rolled Steel or SUS304 Brushed Stainless Steel |
| Control System | 7″ TFT LCD Touch Panel with Dual PID Algorithm, Data Logging, Real-Time Curve Display, Alarm History & Audit Trail |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Power Supply | AC220V±10% 50Hz / AC380V±10% 50Hz |
| Operating Ambient Temperature | +5°C to +35°C |
| Temperature Range (A/B/C) | −20°C to +100°C / −40°C to +100°C / −60°C to +100°C |
| Temperature Uniformity | ≤ ±2.0°C |
| Temperature Stability | ≤ ±0.5°C |
| Temperature Deviation | ≤ ±2.0°C |
| Heating Rate | ≥3°C/min |
| Cooling Rate | 0.7–1.0°C/min |
| Refrigeration System | Air-Cooled Single-Stage Mechanical Compression |
| Compressor | Hermetic Industrial Scroll Compressor |
| Controller | Intelligent PID-Based Digital Temperature Controller |
| Internal Chamber Material | SUS304 Stainless Steel |
| Compliance | GB10589, GB11158, GB10586, IEC 60068-3-5, GB/T 2423-1/2/3/4 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 29,500 (FOB) |
| Temperature Range | −65 °C to +150 °C |
| Humidity Range | 20–95 % RH |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Heating Rate | ≥2.5 °C/min (from +20 °C to +85 °C in ≤60 min) |
| Cooling Rate | ≥1.0 °C/min (from +20 °C to −40 °C in ≤70 min) |
| Refrigeration | Dual-stage mechanical refrigeration (hermetic compressors: Tecumseh or Embraco) |
| Refrigerant | R404A / R23 |
| Humidification | Stainless steel steam generator |
| Insulation | 100 mm high-density fiberglass + polyurethane foam |
| Interior | Mirror-finish SUS304 stainless steel |
| Exterior | Powder-coated A3 steel or brushed SUS304 |
| Viewing Window | Multi-layer tempered glass with conductive film defogging & Philips LED lighting |
| Power Supply | 3-phase 5-wire AC 380 V ±10 %, 50 Hz, PE grounding |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Cell Accuracy | ±0.03% FS |
| Force Resolution | 1/100,000 full scale |
| Encoder Resolution | 2500 PPR |
| Motor Type | Panasonic AC Servo Motor |
| Travel Protection | Mechanical & Software-Based Limit Switches |
| Compliance Standards | GB/T 16491, GB/T 1040, GB/T 8808, GB/T 13022, GB/T 2790–2792, GB/T 16825, GB/T 17200, GB/T 3923.1, GB/T 528, GB/T 2611, GB/T 6344, GB/T 20310, GB/T 3690, GB/T 4944, GB/T 3686, GB/T 529 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | -70 °C to +150 °C (configurable in 4 grades) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Refrigerant | R404A/R23 (ozone-friendly) |
| Construction Material | SUS#304 stainless steel (inner & outer chamber) |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Port | One Ø50 mm test port (left side) |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max Load Capacity | 50 kg |
| Peak Acceleration Range | 30–1000 m/s² |
| Pulse Duration | 1–20 ms |
| Shock Repetition Rate | 10–60 impacts/min |
| Table Surface Dimensions | 500 × 700 mm |
| Maximum Drop Height | 0–60 mm |
| Continuous Operation Time | 8 h |
| Overall Dimensions (L×W×H) | 700 × 1100 × 800 mm |
| Waveform Options | Half-sine, Post-peak Sawtooth, Trapezoidal |
| Control Mode | Closed-loop Acceleration Feedback via Photoelectric Sensor |
| Structural Rigidity | High-stiffness Platform with Uniform Acceleration Distribution |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 620 (FOB) |
| Measurement Range | 0–100 kg/cm² (0.1 kg/cm² resolution) |
| Hydraulic Oil Displacement Rate | 170 ± 15 mL/min |
| Display Units | kg, N, lb |
| Dimensions (W×D×H) | 450 × 430 × 520 mm |
| Sensor Accuracy | ±1 kPa |
| Compliance | ASTM D774, ISO 2758, TAPPI T403, GB/T 454 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Measurement Range | 0–100 kg/cm² (0.1 kg/cm² resolution) |
| Pressure Transduction | High-precision hydraulic pressure sensor |
| Display | LED digital readout |
| Hydraulic Oil Displacement Rate | 170 ± 15 mL/min |
| Units | kg, N, lb |
| Dimensions (W×D×H) | 450 × 430 × 520 mm |
| Accuracy | ±1 kPa |
| Compliance | ASTM D774, ISO 2759, TAPPI T810, GB/T 6545 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 7,200 (FOB) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | -70 °C to +150 °C (configurable models: A: 0–150 °C |
| B | -20–150 °C |
| C | -40–150 °C |
| D | -70–150 °C) |
| Humidity Range | 20–98 %RH (optional: 5–98 %RH) |
| Temperature Ramp Rate | ≤4.0 °C/min (heating), ≤1.0 °C/min (cooling) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2.0 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Controller | 7-inch color TFT touchscreen, bilingual (English/Chinese) |
| Refrigeration System | Hermetic dual-stage cascade compressor (R404A/R23) |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with embedded conductive film |
| Test Port | One Ø50 mm port on left side |
| Accessories | Two adjustable stainless steel shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -40°C to +150°C (empty load) |
| Humidity Range | 20–98% RH |
| Temperature Stability | ±0.3°C |
| Humidity Accuracy | +2 / -3% RH |
| Temperature Uniformity | ±2.0°C |
| Heating Rate | ~10 min (20°C → 150°C) |
| Cooling Rate | ~30 min (20°C → -20°C) |
| Internal Dimensions | 1000 × 1000 × 1000 mm (L×W×H) |
| External Dimensions | 1700 × 1450 × 1850 mm (L×W×H) |
| Inner Liner | Mirror-finish SUS#304 stainless steel |
| Outer Casing | Brushed-finish SUS#304 stainless steel |
| Insulation | High-density rigid PU foam + 24K glass wool |
| Refrigeration System | Hermetically sealed French Tecumseh compressor |
| Refrigerant | Eco-friendly R-404A or equivalent |
| Control System | Touchscreen HMI with bilingual (EN/CN) interface, 120 programs × 1200 segments, PID + BTHC (Balance Thermal & Humidity Control) algorithm |
| Sensor | Dual PT-100 platinum resistance thermometers |
| Resolution | 0.1°C / 0.1% RH |
| Data Logging | Built-in runtime counter, fault diagnostics, and event-triggered alarm history |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Internal Dimensions (W×H×D) | 40 × 35 × 30 cm |
| External Dimensions | 140 × 180 × 145 cm |
| Low-Temperature Zone Range | −70 °C to −10 °C |
| High-Temperature Zone Range | +60 °C to +120 °C |
| Thermal Shock Range | −40 °C to +150 °C |
| Cooling Rate (70 °C drop) | ≈85 min |
| Refrigeration System | Dual-stage cascade refrigeration with water-cooled hermetic or semi-hermetic compressors (EU/US-sourced) |
| Control Interface | 7-inch full-color TFT touchscreen (English/Chinese switchable) |
| Communication Ports | RS232 / RS485 / USB (configurable) |
| Compliance | Meets IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8701-4 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Controller Options | TEMI880 Color Touchscreen Programmable Controller (English/Chinese) or TEMI300 Membrane Keypad Controller (English Only) |
| Refrigeration System | Twin-Compressor Dual-Circuit Design with Original Tecumseh (France) Hermetic Compressors |
| Internal Construction | SUS304 Stainless Steel Interior |
| External Construction | Cold-Rolled Steel with Epoxy Powder Coating or Optional SUS304 Brushed Finish |
| Insulation | Polyurethane Rigid Foam + Ultra-Fine Glass Fiber Blanket |
| Door Seal | Dual-Layer High-Temperature Silicone Gasket |
| Air Circulation | Wide-Band Forced-Air System with Multi-Blade Centrifugal Blower |
| Cooling Method | Air-Cooled Condensation |
| Temperature Range | −70 °C to +180 °C (Standard Dual-Zone Configuration) |
| Humidity Range | 20–98% RH (Optional Humidity Capability) |
| Compliance | ASTM D5229, ISO 16750-4, MIL-STD-810H Method 503.7, IEC 60068-2-14 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Controller Options | TEMI880 Color Touchscreen Programmable Climate Controller (English/Chinese Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Temperature Range | −70 °C to +180 °C |
| Humidity Range | 20–98% RH |
| Cooling System | Dual-Stage Cascade Refrigeration with Original Tecumseh (France) Hermetic Compressor |
| Insulation | Rigid Polyurethane Foam (100 mm thick) + Ultra-Fine Glass Fiber |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | Powder-Coated Cold-Rolled Steel or Optional Brushed SUS304 |
| Airflow | Wide-Band Forced Convection via Multi-Wing Centrifugal Blower |
| Compliance | ASTM D5276, IEC 60068-2-14, MIL-STD-810H Method 503.7 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Controller Options | TEMI880 color touchscreen (English/Chinese), TEMI300 membrane keypad (English only) |
| Temperature Range | −70 °C to +180 °C |
| Shock Transition Time | ≤5 s (typical between chambers) |
| Internal Volume | Standard configurations from 150 L to 1000 L |
| Compliance | IEC 60068-2-14, MIL-STD-810H, GB/T 2423.22 |
| Refrigeration | Twin-compartment forced-air thermal shock system with dual-stage cascade refrigeration (Copeland/Tecumseh or equivalent), French-made “Tecumseh” hermetic compressors |
| Insulation | Polyurethane rigid foam (≥150 mm thickness) + ultra-fine glass fiber blanket |
| Interior Material | SUS304 stainless steel |
| Exterior Finish | Electrostatic powder-coated cold-rolled steel or optional brushed SUS304 |
| Airflow | Wide-band forced convection (top discharge / bottom intake), centrifugal blower, multi-wing impeller |
| Humidification | Surface evaporation type |
| Safety Protections | Compressor overheat/overcurrent/high-pressure cut-off, dry-run protection for heaters/humidifiers, chamber overtemperature alarm, low-water-level interlock, door seal integrity monitoring |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (Reference Only) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |