Bursting Strength Tester
Filter
Showing all 11 results
| Brand | Drick |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | DRK109 Manual Touchscreen |
| Price | USD 7,000 (FOB Qingdao) |
| Brand | Drick |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DRK109 |
| Measurement Range | 250–6000 kPa |
| Clamp Force | >690 kPa |
| Clamping Ring Diameter | φ31.5 ± 0.05 mm |
| Hydraulic System Max Pressure | 6000 kPa |
| Accuracy | ±0.5% F.S. |
| Resolution | 0.1 kPa |
| Compliance | ISO 2759, GB/T 6545, GB/T 454, QB/T 1057, GB 1539 |
| Brand | Fangyuan |
|---|---|
| Model | FY-630A / FY-630B |
| Measurement Range | 0–100 kgf/cm² (0.01 kgf/cm² resolution) |
| Clamp Ring Diameter | 31.50 mm |
| Hydraulic Fluid | 85% glycerin + 15% distilled water |
| Pressure Rise Rate | 95 ± 10 mL/min |
| Drive Motor | 1/4 HP anti-vibration motor |
| Power Supply | 1-phase, AC 220 V, 2 A |
| Compliance | ISO 2759, GB/T 6545, JIS P8112, L1018, ASTM D2210, TAPPI T403 |
| Key | Brand: HESON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | HS-3000A-S (Zipper Tensile Tester) |
| Load Capacity | 1 kN (100 kgf) |
| Effective Test Height | 600 mm |
| Force Resolution | ±1/500,000 |
| Force Accuracy | ±0.5% of reading |
| Displacement Resolution | 0.05 mm |
| Displacement Accuracy | ±0.5% of reading |
| Deformation Resolution | ±1/300,000 F.S. |
| Deformation Range | 0.2–100% F.S. |
| Deformation Accuracy | ±0.5% of reading |
| Speed Range | 0.001–500 mm/min (stepless, segmented control) |
| Speed Accuracy | ±1% (<0.01 mm/min), ±0.5% (≥0.01 mm/min) |
| Force Rate Control Range | 0.5–6% FS/s |
| Deformation Rate Control Range | 0.2–6% FS/s |
| Power Supply | AC 220 V, 50 Hz |
| Force Sensor | Transcell (USA), 1 kN |
| Drive System | Panasonic AC Servo Motor & Controller (Japan) |
| Lead Screw | ABBA high-carbon steel (Taiwan) |
| Linear Guide | Taekyung (Korea), hardened & chrome-plated (HRC ≥60) |
| Dust Protection | Yidie bellows (Taiwan) |
| Control Interface | Touchscreen HMI with PC connectivity and printer support |
| Software | Proprietary bilingual (CN/EN) testing software compliant with GLP audit trail requirements |
| Brand | Labthink |
|---|---|
| Model | BST-01B |
| Measurement Range | 40–1600 kPa |
| Accuracy | ≤0.5% FS |
| Resolution | 0.1 kPa |
| Hydraulic Oil Flow Rate | 95 ± 5 mL/min (methyl silicone oil) |
| Diaphragm Resistance | 25–35 kPa (at 9 mm dome height) |
| Clamp Pressure | >430 kPa (adjustable) |
| Upper Clamp Ring ID | Φ(30.5 ± 0.05) mm |
| Lower Clamp Ring ID | Φ(33.1 ± 0.05) mm |
| System Seal Integrity | <10% Pmax pressure drop within 1 min |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions | 530 × 360 × 590 mm |
| Weight | 80 kg |
| Compliance | GB/T 454, GB/T 3198, ISO 2758, YBB00152002, GB 12255-90 |
| Brand | Labthink |
|---|---|
| Model | BST-02B |
| Measurement Range | 250–5600 kPa |
| Accuracy | ≤0.5% FS |
| Resolution | 0.1 kPa (low range) / 1 kPa (high range) |
| Hydraulic Oil Flow Rate | 170 ± 15 mL/min (methyl silicone oil) |
| Diaphragm Resistance | 170–220 kPa (10 mm dome height) |
| Clamp Pressure | >690 kPa (adjustable) |
| Clamp Ring Inner Diameter | Φ31.5 ± 0.05 mm (upper & lower) |
| Air Supply Requirement | 0.02–0.3 m³/min at 0.6–0.7 MPa |
| Dimensions | 530 × 350 × 600 mm |
| Weight | 85 kg |
| Power | AC 220 V, 50 Hz |
| Compliance | GB/T 1539, GB/T 6545, ISO 2759 |
| Brand | Labthink |
|---|---|
| Model | BST-02B |
| Measurement Range | 250–5600 kPa |
| Accuracy | ≤0.5% FS |
| Resolution | 0.1 kPa (low range) / 1 kPa (high range) |
| Diaphragm Resistance | 170–220 kPa (10 mm dome height), 250–250 kPa (18 mm dome height) |
| Clamp Pressure | >690 kPa (adjustable) |
| Clamp Ring Inner Diameter | Φ31.5 ± 0.05 mm (upper & lower) |
| Hydraulic Oil Flow Rate | 170 ± 15 mL/min (methyl silicone oil) |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions | 530 × 350 × 600 mm |
| Weight | 85 kg |
| Compliance | GB/T 1539, GB/T 6545, ISO 2759 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 620 (FOB) |
| Measurement Range | 0–100 kg/cm² (0.1 kg/cm² resolution) |
| Hydraulic Oil Displacement Rate | 170 ± 15 mL/min |
| Display Units | kg, N, lb |
| Dimensions (W×D×H) | 450 × 430 × 520 mm |
| Sensor Accuracy | ±1 kPa |
| Compliance | ASTM D774, ISO 2758, TAPPI T403, GB/T 454 |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | MTA-2000C |
| Pricing | Available Upon Request |
| Brand | SumSpring |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | NPD-1000S |
| Price | Upon Request |
| Measurement Range | 40–1600 kPa |
| Resolution | 0.01 kPa |
| Accuracy | ±0.5% FS |
| Hydraulic Fluid Displacement Rate | 95 ± 5 mL/min |
| Diaphragm Resistance | 25–35 kPa |
| Diaphragm Bulge Height | 9 mm |
| Clamping Force | >430 kPa (adjustable) |
| System Seal Integrity | <10% pressure drop within 1 min at Pmax |
| Pressure Gauge Set Point | 2.5–3.0 kg/cm² |
| Dimensions (L×W×H) | 400 × 350 × 500 mm |
| Weight | 33 kg |
| Required Air Supply | 0.5–0.7 MPa (user-provided) |
| Operating Temperature | 15–50 °C |
| Relative Humidity | ≤80%, non-condensing |
| Power Supply | 220 V, 50 Hz |
| Brand | Yuelian / PW |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PW-6602C |
| Power Supply | AC 220 V ±10%, 2 A, 50 Hz |
| Measurement Range | 250–5600 kPa |
| Resolution | 0.1 kPa |
| Indication Error | ±0.5% FS |
| Repeatability | ≤0.5% FS |
| Oil Feed Rate | (170 ± 5) mL/min |
| Clamping Force | ≤1200 kPa (adjustable) |
| Air Compressor Requirement | 0.6–0.7 MPa pressure, 0.02–0.3 m³/min displacement (not included) |
| System Seal Integrity | <10% FS pressure drop within 1 min |
| Display | 7-inch color TFT touch screen with bilingual (Chinese/English) UI |
| Printer | Integrated thermal printer module |
| Communication Interfaces | USB (optional), WAN port (optional) |
| Operating Environment | 10–30 °C ambient temperature, RH < 85% non-condensing |
| Dimensions (L×W×H) | 400 × 350 × 500 mm |
| Weight | ~40 kg |
| Compliance | ISO 2758, GB/T 454 |