Other Brands
Filter
Showing 241–270 of 646 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −20 °C to 150 °C (model-dependent) |
| Humidity Range | 20–98% RH |
| Internal Dimensions | 40 cm (W) × 50 cm (H) × 40 cm (D) |
| External Dimensions | 100 cm (W) × 80 cm (H) × 105 cm (D) |
| Power Supply | AC 220 V, Single Phase |
| Compliance | GB/T 5170.18, GB/T 10586, GB/T 2423.22, IEC 60068-2-14 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,650 (approx.) |
| Internal Dimensions (W×H×D, mm) | 500×600×500 to 1000×1000×1000 |
| External Dimensions (W×H×D, mm) | 1750×2250×2350 to 2350×2800×3000 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (optional) | 20–98 %RH |
| Rapid Temperature Transition Range | −45 °C to +85 °C |
| Transition Rate Options | 5–30 °C/min (A–F models, linear or non-linear programmable) |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 %RH |
| Temperature Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5 %RH |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1 %RH |
| Refrigeration System | Water-cooled, dual-compressor (Tecumseh/Tecumseh or Bitzer) |
| Inner Chamber Material | SUS304 stainless steel |
| Outer Chamber Material | Stainless steel or SECC cold-rolled steel with epoxy powder coating |
| Insulation | High-density polyurethane foam (CFC-free) |
| Safety Protections | Over-temperature/over-humidity cutoff, high/low refrigerant pressure switch, compressor overload protection, fuse, water shortage alarm, fault diagnostic display |
| Power Supply | AC 380 V, 3-phase 5-wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C |
| Rapid Transition Range | -45 °C to +85 °C |
| Max Linear Ramp Rate | 15 °C/min |
| Adjustable Ramp Rate | 3–20 °C/min (linear/non-linear) |
| Humidity Range (optional) | 5–98% RH |
| Temperature Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Uniformity | ±2.0 °C / ±3.0% RH |
| Internal Construction | SUS304 Stainless Steel, Matte Finish |
| Insulation | High-Density Polyisocyanurate Foam |
| Cooling System | Air-Cooled or Water-Cooled |
| Compressor | Tecumseh (France) |
| Refrigerant | R-404A & R-501 (EPA-compliant) |
| Power Supply | AC 220 V, 1-Phase or AC 380 V, 3-Phase |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–32,000 (FOB) |
| Internal Dimensions (W×H×D, mm) | 500×600×500 to 1000×1000×1000 |
| External Dimensions (W×H×D, mm) | 1750×2250×2350 to 2350×2800×3000 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (optional) | 20–98 % RH |
| Rapid Transition Range | −45 °C to +85 °C |
| Transition Rate Options | 5–30 °C/min (linear or non-linear mode selectable) |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 % RH |
| Temperature Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5 % RH |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1 % RH |
| Refrigeration System | Water-cooled |
| Compressor | Tecumseh (France) or Bitzer (Germany) |
| Inner Chamber Material | SUS 304 stainless steel |
| Outer Chamber Material | Cold-rolled steel with epoxy powder coating or stainless steel |
| Insulation | High-density polyurethane foam (CFC-free) |
| Power Supply | AC 380 V, 3-phase 5-wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range Options | A: −20°C to 150°C |
| B | −40°C to 150°C |
| C | −60°C to 150°C |
| D | −70°C to 150°C |
| Humidity Range | 20–98% RH (customizable) |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 1.0–3.0°C/min (customizable) |
| Cooling Rate | 2.0°C/min (customizable) |
| Internal Dimensions | 100 × 100 × 150 cm (W × D × H) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (FOB) |
| Internal Dimensions (W×H×D) | 500 × 750 × 600 mm |
| External Dimensions (W×H×D) | 1400 × 1870 × 1350 mm |
| Temperature Range | −40 °C to +150 °C |
| High-Temp Preheat Range | +60 °C to +200 °C |
| Low-Temp Precool Range | −55 °C to −10 °C |
| RT → +200 °C Ramp Time | ≈35 min |
| RT → −55 °C Ramp Time | ≈75 min |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Thermal Shock Transition Time (Basket Transfer) | ≤10 s |
| Thermal Shock Recovery Time (−40 °C ↔ +150 °C) | ≤5 min |
| Dwell Time per Zone | ≥30 min |
| Heating Power (Hot Zone) | 3.5 kW |
| Cooling Power (Cold Zone) | 2.5 kW |
| Circulation Motor | 90 W |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | Ceramic Fiber (Hot Zone), High-Density Polyurethane Foam (Cold Zone) |
| Compliance | GB/T 10592–2008, GB/T 10586–2012, GB/T 2423.1–2021, GB/T 2423.2–2021, GB/T 2423.3–2016, GB/T 2423.4–2016 |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Pricing | Upon Request |
| Current Ratings | AUX-35: 3.07 A |
| AUX-50 | 4.17 A |
| AUX-100 | 8.33 A |
| Operating Voltage | 12–13.3 V DC |
| Color Temperature | 3000 K |
| Rated Lifetime | 600–2000 hrs |
| Mounting | 1-inch flange interface |
| Software Compatibility | LightMtrx® |
| Power Supply Requirement | Labsphere adjustable DC power supply |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | −70°C to +180°C |
| Shock Transition Time (5% Zone) | ≤15 s (Typical, 150 L Unit) |
| Test Zone Volume | ≥500 L |
| Control System | Color TFT LCD Touchscreen Interface |
| Cooling System | Dual-Stage Cascade Refrigeration (Air-Cooled or Water-Cooled Options) |
| Max Cycle Count | 9999 |
| Max Dwell Time per Segment | 9999 min |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 5170.2, GB/T 2424.1, GB 11158, GB 10592 |
| Data Logging | Optional External Recorder or PC Interface (RS485/USB/Ethernet) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (FOB) |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3–150.5, GJB 360.7, GJB 367.2, IEC 60068-2-14, SJ/T 10186–10187, QC/T 17, EIA-364-32 |
| Refrigeration System | Dual-stage cascade refrigeration with imported German semi-hermetic compressors |
| Cooling Method | Water-cooled (external cooling tower required: 10 m³/h flow rate) |
| Temperature Range | –65 °C to +150 °C |
| Transition Time | ≤5 min (typical, 150 °C ↔ –65 °C, internal chamber air) |
| Configuration | Two-chamber (hot/cold separate chambers) |
| Control Accuracy | ±0.5 °C (steady-state), ±2.0 °C (transition phase) |
| Data Logging | Real-time temperature profiling with timestamped CSV export |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Stroke | 25.4 mm (1 inch) |
| Table Size | 1000 mm × 1000 mm |
| Payload Capacity | 100 kg |
| Frequency Range | 120–300 RPM (continuous adjustment) |
| Speed Accuracy | ±3 RPM |
| Timer Range | 0.00–99.99 hours |
| Overall Dimensions (L×W×H) | 2200 × 2200 × 700 mm |
| Compliance | ASTM D999, ISTA 1A-2001, EN 71 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,100 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Turntable Diameter | Ø300 mm |
| Turntable Load Capacity | 30 kg |
| Turntable Speed | 1–17 rpm (adjustable) |
| Nozzle Diameter | Ø0.4 mm / Ø0.8 mm / Ø1.2 mm |
| Nozzle Spacing | 12.5 mm or 50 mm |
| Oscillating Arm Radius | R400 mm |
| Oscillating Arm Range | ±60°, ±180° |
| Oscillating Flow Rate | 1.8 L/min |
| Rotating Arm Length | 500 mm |
| Rotating Arm Pipe Diameter | Ø16 mm |
| Rotating Arm Nozzle Count | 40 |
| Rotating Arm Speed | 23 rpm |
| Rotating Arm Spray Pressure | 98 kPa (adjustable) |
| Rotating Arm Flow Rate | 25.4 L/min (adjustable) |
| Water Supply | Clean municipal tap water |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | +5°C to +60°C (optional up to +80°C) |
| Temperature Uniformity | ±0.5°C |
| Temperature Deviation | ±3°C (customizable to ±1.5°C upon request) |
| Control Mode | Manual setpoint, constant-temperature operation, or programmable ramp-soak profiles (touchscreen controller optional) |
| Power Supply | AC 380 V, 50 Hz |
| Sound Pressure Level | ≤75 dB(A) |
| Construction | Double-skin color-coated steel insulated panels (EPS / polyurethane / rock wool core), panel thickness options: 50–100 mm, steel skin thickness: 0.326–0.5 mm |
| Structural Frame | Galvanized steel framework with aluminum extrusion edge trim |
| Sealing | High-performance silicone sealant at all joints |
| Fire Rating | ASTM E84 Class B2 (moderate combustibility) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (approx. ¥80,000) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (FOB) |
| Temperature Range | 105–132 °C (Control Point) |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Control Point | 100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kgf/cm²) |
| Heating Time | 35 min (RT → 132 °C) |
| Pressurization Time | 40 min (Ambient → 0.196 MPa) |
| PID Temperature Control Accuracy | ±0.1 °C |
| Safety Features | Dual Overheat Protection, Interlocked Door Switch, Mechanical Safety Valve, Auto-Water Replenishment, Saturated Steam Purge System |
| Construction | ABS Insulated Door, Integrated Silicone Gasket, Stainless Steel Chamber |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| Temperature Range (Hot Zone) | RT to +200 °C |
| Temperature Range (Cold Zone) | RT to −70 °C |
| Test Zone Range | +60 °C to +150 °C (hot shock) |
| Switching Mechanism | Pneumatic air-door, static sample placement |
| Recovery Time | <5 min |
| Temperature Uniformity | ±2.0 °C |
| Control Accuracy | ±0.5 °C |
| Refrigeration | Dual-stage cascade system with semi-hermetic compressors (R404A/R23) |
| Insulation | High-density fire-retardant PU foam |
| Interior Material | SUS#304 mirror-finish stainless steel |
| Exterior Material | SUS#304 stainless steel or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| [Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General distributor |
| Price | USD 12,500 (approx.) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| High-Temperature Storage Range | RT to +200°C |
| Low-Temperature Storage Range | RT to –70°C |
| Test Zone Temperature Range | Hot Shock (+60°C to +150°C) |
| Switching Mechanism | Pneumatic damper actuation with stationary test specimen |
| Preheating Time (RT → 150°C) | ~30 min |
| Precooling Time (RT → –70°C) | ~85 min |
| Temperature Recovery Time | <5 min |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Refrigeration System | Dual-stage cascade refrigeration with semi-hermetic compressors (R404A/R23) |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Chamber Material | SUS#304 stainless steel or powder-coated steel |
| Insulation | High-density fire-retardant PU foam |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Brand | Other Brands |
|---|---|
| Origin | Hubei, China |
| Supplier Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | LC |
| Rental Rate | USD 70 – 7,000 per month (equivalent to RMB ¥500 – ¥50,000) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ≤ ±0.5°C |
| Humidity Deviation | +2 / -3% RH |
| Control System | TEMI880 Touchscreen Controller (Korea) |
| Heating | Ni-Cr Alloy Heaters |
| Cooling | French Tecumseh Hermetic Compressor |
| Fluid Medium | Silicone Oil / Glycol / Water / Special Coolant |
| Sample Transfer Time | ≤10 s |
| Chamber Interior | SUS304 Stainless Steel |
| Insulation | Polyurethane Rigid Foam + Ultra-Fine Glass Fiber |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 100–300 rpm |
| Amplitude (p-p) | 25.4 mm |
| Timer Range | 0–99 h 99 min |
| Frequency Display Resolution | 0.1 rpm |
| Vibration Mode | Rotary (eccentric cam-driven) |
| Max Load Capacity | 100 kg |
| Effective Table Size | 1000 × 1000 mm |
| Motor Power | 1 HP (0.75 kW) |
| Dimensions (W×D×H) | 1100 × 1300 × 650 mm |
| Weight | ~300 kg |
| Max Acceleration Limit | 20 g (calculated per ISO 10816-1 & ASTM D999) |
| Max Amplitude Constraint | 5 mm (frequency-dependent, per EN 1010-1 derived envelope) |
| Compliance | ISTA 2A/3A, ASTM D999, ANSI X3.31, UL 60950-1, EN 61000-6-2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB) |
| Internal Chamber Dimensions | 80 × 80 × 80 cm or 100 × 100 × 100 cm |
| Spray Ring Radius | 400 mm |
| Spray Pipe Diameter | φ16 mm |
| Nozzle Orifice Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillating Arm Range | ±60°, ±90°, ±160° |
| Turntable Speed | 1 rpm (standard), variable-speed option available |
| Rain Duration | Adjustable up to 15 min |
| Intermittent Interval | Adjustable up to 30 min |
| Rainfall Intensity | Up to 150 mm/h (adjustable) |
| Viewing Window | Large-area tempered glass door |
| Construction Material | Mirror-finish SUS304 stainless steel (inner & outer chamber, turntable) |
| Safety Protections | Leakage protection, short-circuit protection, motor overload protection |
| Power Supply | 1Φ3W AC220V±10% 50/60 Hz or 3Φ5W AC380V±10% 50/60 Hz |
| Compliant Standards | GB/T 10485–2007, GB/T 4208–2008, GB/T 4942.2–1993 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | LXJ-Capacity |
| Price | USD 14,000 (approx.) |
| Compliance | MIL-STD-810F, MIL-STD-883C, GJB150, GJB360, GB/T 2423, IEC 60068-2-27 |
| Max Load Capacity | 35–200 kg |
| Acceleration Range | 30–400,000 g (0.3–3920 kN/m² equivalent) |
| Test Axes | X, Y, Z orthogonal directions |
| Specimen Height Limit | 200–300 mm |
| Installation Radius | 200–1000 mm |
| Power Supply | AC 380 V, 1.5–6.5 kVA |
| Continuous Operation Time | 30–60 min |
| Control System | Industrial PC with Real-Time Data Acquisition |
| Slip Ring Configuration | Up to 15 channels, 500 V / 5 A |
| Dimensions (L×W×H) | 924×910×1242 mm to 1953×470×993 mm |
| Weight | 1000–2300 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Quotation | Upon Request |
| Build Volume | 300 × 300 × 300 mm |
| Layer Resolution | 90–400 µm |
| Nozzle Diameter | 0.4 mm |
| Nozzle Temperature | ≤380 °C |
| Heated Bed Temperature | 20–110 °C |
| XY Positioning Accuracy | 1.5 µm |
| Z Step Resolution | 1.25 µm |
| Single-Point Positioning Accuracy | 1.5 µm |
| Filament Diameter | 1.75 mm |
| Compatible Materials | Z-HIPS, Z-GLASS, Z-PETG, Z-PHA |
| Software | Z-Suite® |
| File Formats | STL, OBJ, DXF |
| OS Support | Windows XP–10, macOS X |
| Power Input | 110/240 V AC, 50/60 Hz |
| DC Output | 24 V DC @ 11 A |
| Max Power Consumption | ~500 W |
| Connectivity | SD Card (included) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 16,800 (FOB) |
| Model | OKPZ-50 |
| Drop Height Range | 50–1000 mm (adjustable in 50 mm increments) |
| Impact Mass Options | 300 g, 500 g, 1000 g, 2000 g |
| Hammer Tip Radius | 7.9 mm (5/16″), 12.7 mm (1/2″), 6.35 mm (1/4″), 4.76 mm (3/16″), 3.18 mm (1/8″), 1.59 mm (1/16″) |
| Specimen Holder Radii | 8.1 mm (1/4″), 15 mm (approx. 9/16″) — flat and spherical configurations |
| Dimensions (L×W×H) | 580 × 450 × 1280 mm |
| Net Weight | ~60 kg |
| Waveform Generation | Half-sine, trapezoidal, and terminal-peak sawtooth shock pulses |
| Control Method | Digital height setting with optical feedback loop |
| Compliance | IEC 60068-2-27, MIL-STD-810H Method 516.8, GJB 150.18A, JIS C 0041, ASTM D3332 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Waveform Options | Half-Sine (Standard), Trapezoidal & Reverse-Peak Sawtooth (Optional) |
| Height Control | Digital Positioning with ±0.5 mm Repeatability |
| 制动 System | Hydraulic Post-Impact Arrest Mechanism |
| Damping | Multi-Stage Isolation Mounts for Structural Vibration Suppression |
| Drive Motor | DC Servo with Variable-Speed Control |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT to 85 °C (Operating Range: 50 ±10 °C) |
| Humidity Range | 40–70 % RH (Illumination), 50–90 % RH (Dark Cycle) |
| Temperature Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.0 % RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 % RH |
| Heating Rate | ≤25 min (RT → 85 °C) |
| Light Source | 2.5 kW Air-Cooled Metal Halide Lamp (1 unit) |
| Irradiance Spectrum | 295–450 nm |
| Spectral Match | Equivalent to terrestrial solar radiation filtered through 3 mm borosilicate glass |
| Illumination Uniformity | ≥90 % across specimen plane |
| Sample Tray Dimensions | 500 × 400 mm |
| Illumination Geometry | Top-mounted lamp with reflective direct irradiation |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 1,350 (FOB) |
| Capacity Options | 1000 kg / 2000 kg / 5000 kg |
| Test Area | 1200 mm × 1200 mm (customizable) |
| Resolution | 1/10,000 full scale |
| Units | kg, N, lb |
| Compression Speed | 10 ± 3 mm/min |
| Machine Dimensions | 1200 mm × 1000 mm × 1400 mm |
| Weight | Approx. 750 kg |
| Power Supply | 220 V AC, 50 Hz |
| Load Cell | High-precision explosion-proof load cell (USA-made) |
| Drive System | Taiwan-sourced AC frequency-controlled motor |
| Actuation | Precision ball screw vertical lift mechanism |