PerfectLight (Perfetlight)
Filter
Showing all 3 results
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLR-HTSR |
| Heating Range | Ambient to 300 °C |
| Temperature Accuracy | ±0.5 °C |
| Max Working Pressure (gauge) | 0–1.6 MPa |
| Reactor Volume (gas phase) | ~18 mL (integral mode: ~27 mL |
| differential mode | ~35 mL) |
| Liquid Fill Capacity | ≤6.5 mL |
| Reactor Body Material | 304 Stainless Steel |
| Optical Window | Sapphire, Ø30 mm, >90% Transmittance in UV-Vis-NIR (200–2500 nm) |
| Gas Inlet/Outlet Fitting | Standard Ø3 mm Swagelok-compatible Compression Fitting |
| Heating Element | Embedded Ni-Chrome Resistive Heater on 96% Al₂O₃ Ceramic Substrate |
| Temperature Sensor | Integrated K-Type Thermocouple with PID Feedback Control |
| Catalyst Support Options | Quartz Fiber Membrane (Ø37–50 mm, active area Ø35 mm), SiC Porous Ceramic Disc |
| Internal Insulation | Glass Fiber–Phenolic Resin Composite |
| Sealing | Fluoroelastomer (FKM) O-Ring |
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300+300UV |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Total Optical Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 2500 nm) |
| Beam Divergence | ~6° (average) |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Irradiance Stability | ≤ ±3% |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Max Current Limit | 21 A |
| Triggering Method | Integrated High-Voltage Ignition (dual-stage, no high-voltage cabling) |
| Lamp Housing | Shielded Metal Enclosure |
| Power Management | Microcontroller-Based Digital Control |
| Safety | Low-Voltage Interconnect Between Lamp Housing and Power Supply |
| Brand | PerfectLight (Perfetlight) |
|---|---|
| Origin | Beijing, China |
| Model | PLS-SXE300E |
| Light Source Type | Xenon Arc Lamp |
| Illumination Mode | External Irradiation |
| Lamp Power | 300 W |
| Power Adjustment Range | 150–300 W |
| Power Supply Ripple | 150 mVp-p |
| Load Regulation | ±0.5% |
| Current Display | Digital |
| Control Mode | Programmable / PC Software Interface |
| Current Limit Setting | 21 A |
| Lamp Lifetime | >1000 h (under standard photocatalytic operating conditions) |
| Triggering Method | Integrated High-Voltage Ignition (two-stage, no high-voltage cabling) |
| Total Optical Output Power | 50 W |
| Spectral Range | 320–780 nm (extendable to 320–2500 nm) |
| Beam Divergence | Avg. 6° |
| Spot Diameter | 30–60 mm (distance-dependent) |
| Long-Term Stability | ≤±3% |
| Cooling Architecture | Axial Fan-Based Heat Dissipation (Patent CN201320740323.5) |
| Safety Features | No HV transmission between lamp housing and power supply, fan-fault protection, auto-start on power-up, shutdown delay, overcurrent/overload cutoff |