Shimadzu
Filter
Showing 61–90 of 182 results
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Instrument Type | Single Quadrupole GC-MS |
| GC Configuration | Conventional Capillary GC-MS |
| Mass Range | 1.5–1090 u |
| Resolution | Unit Mass Resolution |
| Scan Speed | 30,000 u/sec |
| Brand | Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic Instrument |
| Model | GCMS-TQ8040 NX |
| Price Range | USD 210,000 – 280,000 |
| Instrument Type | Triple Quadrupole Mass Spectrometer |
| GC Configuration | Conventional Capillary GC Coupling |
| Mass Range | m/z 2–1090 |
| Resolution | 0.4–3.0 Da (Full Width at Half Maximum, FWHM) |
| Sensitivity | >18,000:1 (Signal-to-Noise Ratio, S/N, for 1 pg OFN in MRM mode) |
| Scan Speed | Up to 20,000 u/s |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported Instrument |
| Instrument Type | Triple Quadrupole Mass Spectrometer |
| GC Configuration | Conventional Gas Chromatograph Coupling |
| MRM Channel Capacity | Up to 32,768 per run |
| Ion Source | Patented High-Efficiency Ion Source |
| Collision Cell | Optimized RF-Only Collision Cell |
| Scan Modes | Simultaneous Scan and MRM Acquisition |
| Software Platform | GCMSsolution with Smart MRM Automation |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported Instrument |
| Model | GCMS-TQ8040X |
| Instrument Type | Triple Quadrupole Mass Spectrometer |
| GC Configuration | Conventional Capillary Gas Chromatograph |
| MRM Channel Capacity | Up to 32,768 per run |
| Ion Source | Patented High-Efficiency Ion Source |
| Collision Cell | Optimized RF-Only Quadrupole Collision Cell |
| Scan Modes | Simultaneous Scan and MRM Acquisition |
| Software Platform | GCMSsolution with Smart MRM Automation |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | GCMS-TQ8050 NX |
| Instrument Type | Triple Quadrupole Mass Spectrometer |
| GC Configuration | Conventional Capillary Gas Chromatograph Coupling |
| Mass Range | 2–1090 m/z |
| Resolution | Unit Mass Resolution |
| Sensitivity | >20,000:1 (Signal-to-Noise Ratio, S/N, for 1 pg OFN in Scan Mode) |
| Scan Speed | 20,000 u/s |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | GCMS-TQ8050 |
| Year of Manufacture | 2018 |
| Condition | Refurbished & Certified Pre-Owned |
| Configuration | Complete Benchtop System with GC, TQMS, Autosampler, and GCMS Insight Software |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | HIC-ESP |
| Instrument Type | Laboratory Benchtop System |
| Pump Maximum Pressure | 40 MPa |
| Flow Rate Range | 0.001–10.000 mL/min |
| Eluent Flow Rate Range | 0.001–10.000 mL/min |
| Maximum Operating Pressure | 30 MPa |
| Column Oven Temperature Range | 20–85 °C |
| Temperature Reproducibility | ±0.1 °C |
| Eluent Concentration Range | 0.1–100 mM |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | HITS-X Series |
| Pricing | Available upon Request |
| Brand | Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Line | HMA-4200 Series |
| Measurement Principles | Colorimetric Spectrophotometry per ISO 11969 / GB/T 7467–1987 (for Cr(VI)), ISO 11045 / GB/T 7475–1987 (for Total Cr, Cu, Ni) |
| Detection Range | 0–2 mg/L (Cr(VI), Total Cr), 0–3.5 mg/L (Total Cu), 0–10 mg/L (Total Ni) |
| Accuracy | ≤±5% FS |
| Repeatability | ≤±5% RSD |
| Linearity Error | ≤±5% FS |
| Span Drift | ≤±5% over 24 h |
| Zero Drift | ≤±3% (Cr(VI), Total Ni), ≤±5% (Total Cu) |
| Minimum Measurement Cycle | 20 min (Cr(VI)), 50 min (Total Cr, Cu, Ni) |
| Calibration Mode | Manual or Automatic (with standard solution dispensing module) |
| Output Interface | RS-232 serial port and isolated 4–20 mA analog output |
| MTBF | ≥1440 h |
| Power Supply | 220 VAC ±10%, 50 Hz ±5% |
| Dimensions (H×W×D) | 1550 × 500 × 420 mm |
| Enclosure Rating | IP54 (indoor installation) |
| Compliance | Designed to support ISO/IEC 17025-compliant QA/QC workflows |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | HMV-G Series |
| Instrument Type | Vickers Hardness Tester |
| Test Force Range | 9.807 mN – 19.61 N |
| Maximum Total Test Force | 19.61 N |
| Specimen Space | Horizontal/Vertical travel: Unlimited |
| Depth direction | Up to 200 mm for specimens wider than 120 mm |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported |
| Model | i-QLinks |
| Software Type | Chromatography-Centric LIMS |
| Deployment | Web-Based, Server-Hosted |
| Integration Platform | LabSolutions CS and LabSolutions S Database |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Product Type | Imported Instrument |
| Model | i-Series LC-2070 / LC-2080 |
| Instrument Category | Conventional HPLC System |
| Application Scope | General-Purpose Analytical HPLC |
| Flow Rate Range | 0.0001–10.0000 mL/min |
| Maximum Pressure | 50 MPa (LC-2070) / 70 MPa (LC-2080) |
| Flow Accuracy | < 0.06 % RSD or < 0.02 min SD |
| Sample Capacity | 336 positions (1 mL vials), 216 positions (1.5 mL vials), 112 positions (4 mL vials) |
| Injection Volume Range | 0.1–100 µL |
| Column Oven Temperature Range | 12 °C below ambient to 90 °C |
| UV-Vis Wavelength Range | 190–700 nm |
| Data Acquisition Rate | 100 Hz |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | IC-MS |
| Instrument Type | Laboratory Benchtop System |
| Application Scope | General-Purpose Ion Analysis |
| Maximum Pump Pressure | 0–36 MPa |
| Flow Rate Range | 0.001–10.000 mL/min |
| Eluent Concentration Range | 0.1–100 mM |
| Brand | Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (PRC) |
| Model | IC-MS/MS |
| Instrument Type | Laboratory Benchtop System |
| Application Scope | General-Purpose Multi-Analyte Quantification |
| Pump Pressure Rating | 0–36 MPa |
| Flow Rate Range | 0.001–10.00 mL/min |
| Column Oven Temperature Range | Ambient +10 °C to 85 °C |
| Temperature Stability | ±0.1 °C |
| Eluent Concentration Range | 0.1–100 mM |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | ICPE-9800 |
| Instrument Type | Full-Spectrum Direct-Reading ICP-OES |
| Argon Purity Requirement | ≥99.95% |
| Minimum Argon Flow (Eco Mode) | 5 L/min |
| UV Spectral Range | 165–190 nm |
| Optical System | Two-Dimensional Cross-Dispersion with Sealed Vacuum Chamber |
| Detector | High-Resolution Megapixel CCD |
| Torch Configuration | Vertical Dual-View Design |
| Software Platform | ICPESolution v3.x with Automatic Interference-Free Wavelength Selection |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported Instrument |
| Model | ICPMS-2030 Series |
| Instrument Type | Quadrupole Mass Spectrometer |
| Plasma Gas Consumption (Standard Mode) | 10 L/min |
| Plasma Gas Consumption (Eco Mode, Standby) | 5 L/min |
| Carrier Gas Purity Requirement | Standard Argon (99.95%) |
| Software Compliance | FDA 21 CFR Part 11, ERES, GLP/GMP Audit Trail Ready |
| LC-ICP-MS Compatibility | Yes |
| Collision Cell Technology | Integrated Quadrupole-Based Collision/Reaction Cell |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model Series | ICPMS-2040/2050 |
| Instrument Type | Quadrupole Mass Spectrometer |
| Mass Range (amu) | 5–260 |
| Unit Mass Resolution (amu) | 0.3–0.6 |
| Short-Term Stability (RSD) | ≤3% |
| Long-Term Stability (RSD) | ≤3% |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | iMScope QT |
| Instrument Type | MALDI-Q-TOF Hybrid Imaging System |
| Spatial Resolution | ≤5 µm |
| Sensitivity | Equivalent to LCMS-9030 |
| Mass Accuracy | <1 ppm over 24 h at ambient temperature |
| Acquisition Speed | ≥50 pixels/sec |
| Mass Precision | <1 ppm |
| Detection Platform | Integrated Optical Microscope–MALDI Source–Q-TOF Mass Spectrometer |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | inspeXio 7000 |
| Detector Type | Flat-Panel Detector |
| Scan Mode | Rotation-Only (RO) |
| X-ray Energy | 225 kV |
| Maximum Specimen Dimensions | Ø400 mm × H300 mm |
| Maximum Sample Weight | >12 kg |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Instrument Type | Laboratory FTIR Spectrometer |
| Wavenumber Range | 7800–350 cm⁻¹ |
| Resolution | 0.9 cm⁻¹ |
| Scan Speed | 45 scans/min (at 4 cm⁻¹ resolution) |
| Signal-to-Noise Ratio | 30,000:1 |
| Form Factor | Compact, Dual-Orientational (Horizontal/Vertical Placement) |
| Sample Compartment | Large-volume chamber compatible with Shimadzu and third-party FTIR accessories |
| Software | IR Pilot with 23 preconfigured application workflows, qualitative identification module, and pass/fail foreign material analysis module |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | IRTracer-100 |
| Instrument Type | Laboratory Benchtop |
| Instrument Class | Fourier Transform Type |
| Price Range | USD 35,000 – 70,000 (FOB Japan) |
| Key Performance | SNR up to 60,000:1 (DLATGS detector, 4 cm⁻¹, 2,200 cm⁻¹ region, 1-min scan) |
| Spectral Resolution | 0.25–16 cm⁻¹ (user-selectable) |
| Acquisition Speed | Up to 20 spectra/sec (at 16 cm⁻¹) |
| Detector Options | DLATGS (standard), MCT (optional, liquid N₂-cooled) |
| Software Platform | LabSolutions IR v2.x or later |
| Compliance | FDA 21 CFR Part 11, PIC/S Annex 11, GLP/GMP-ready audit trail & electronic signature support |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | IRXross |
| Instrument Type | Laboratory FTIR Spectrometer |
| Wavenumber Range | 7800–350 cm⁻¹ |
| Spectral Resolution | 0.25 cm⁻¹ |
| Signal-to-Noise Ratio (S/N) | 55,000:1 |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | LAB CENTER XRF-1800 |
| Pricing | Available Upon Request |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument Software |
| Model | LabSolutions CS |
| Software Type | Chromatography Data System |
| Regulatory Compliance | Designed for 21 CFR Part 11, Annex 11, and GLP/GMP environments |
| Deployment Architecture | Client-server, networked multi-user system |
| Integration Capability | Supports multi-instrument data ingestion (GC, LC, HPLC, UHPLC), LIMS/ERP export, and third-party database interoperability |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Software |
| Model | LabSolutions LIRS SDK |
| Software Type | Chromatography Data System (CDS) Integration Toolkit |
| Development Platforms | .NET Framework, Java SE |
| Communication Mode | Synchronous & Asynchronous |
| Integration Scope | Bidirectional and Unidirectional API-based Interfacing with LabSolutions CS |
| Compliance Support | 21 CFR Part 11 Ready (Audit Trail, Electronic Signature, User Authentication), GLP/GMP-Aligned Architecture |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | LabSolutions MD |
| Instrument Category | Conventional High-Performance Liquid Chromatography (HPLC) System Software |
| Application Scope | General-Purpose Analytical Method Development for HPLC/UHPLC |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | ZL-LC-10A |
| Rental Rate | USD 700/month (approx.) |
| Configuration Flexibility | Modular HPLC Unit Compatibility |
| Regulatory Support | Compatible with GLP/GMP-compliant data handling workflows |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | LCMS-2050 |
| Instrument Type | Single Quadrupole LC-MS |
| Application Scope | General-Purpose |
| Mass Range | m/z 2–2000 |
| Brand | Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (PRC) |
| Model | LCMS-8045 |
| Instrument Type | Tandem Quadrupole (QqQ) |
| Application Scope | General-Purpose |
| Mass Range | 2–2000 Da |
| Sensitivity | S/N ≥ 100,000:1 (1 pg reserpine, ESI+) |
| Resolution | < 0.7 Da (FWHM) |
| Mass Accuracy | ±0.1 Da |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Tandem Quadrupole (QqQ) |
| Model | LCMS-8045RX |
| Application Scope | General-Purpose Quantitative and Qualitative Analysis |
| Compliance | Designed for GLP/GMP, ISO/IEC 17025, and FDA 21 CFR Part 11–enabled workflows |