Shimadzu
Filter
Showing 1–30 of 372 results
| Brand | Shimadzu |
|---|---|
| Origin | Italy |
| Model | HT200H Headspace Autosampler |
| Sample Capacity | 40 positions (for 10 mL or 20 mL headspace vials) |
| Sample Heating Block | Simultaneous heating of up to 6 vials |
| Heating Temperature Range | 40–150 °C |
| Heating Time Range | 0–23 h 59 min |
| Agitation Duration | 0–99 min |
| Agitation Speed | Adjustable |
| Syringe Volume | Standard 2.5 mL, optional 5 mL |
| Minimum Injection Volume | 0.01 mL |
| Injection Flow Rate | 0.1–100 mL/min |
| Equilibration Delay | 0–60 s |
| Needle Temperature Control | 40–150 °C |
| Carrier/Purge Gas | Inert gas (N₂ or He) |
| Extraction Mode | Multiple Headspace Extraction (MHE), up to 15 cycles |
| Software Compatibility | HT-Comsoft-H and Clarity Chromatography Data Systems |
| Position Flexibility | Removable sample tray configurable for left- or right-side installation |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | 5D Ultra-e |
| Instrument Type | Triple Quadrupole Mass Spectrometer |
| Chromatography Configuration | Comprehensive Two-Dimensional Gas Chromatography (GC×GC) Coupled with Online Liquid Chromatography (LC) |
| Mass Range | m/z 2–1090 |
| Resolution | Unit Mass Resolution |
| Sensitivity | >15,000:1 (S/N, peak-to-peak, at 1 pg OFN) |
| Scan Speed | 20,000 u/s |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AA-6300 |
| Wavelength Range | 185–900 nm |
| Grating Density | 1800 lines/mm |
| Focal Length | 298 mm |
| Blaze Wavelength | 250 nm |
| Optical System | Czerny-Turner with astigmatism correction |
| Beam Configuration | Dual-beam (optical for flame, electronic for graphite furnace) |
| Background Correction | BGC-SR (Self-Reversal) and BGC-D₂ (Deuterium Lamp), full-wavelength capability |
| Detectors | Automatic switching between photomultiplier tube (short wavelength) and photodiode (long wavelength) |
| Atomization Modes | Flame and graphite furnace with automated interchange |
| Burner Head Height | Motorized auto-adjustment |
| Compliance | ASTM E1717, ISO 11171, USP <731>, GLP-ready data handling |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Instrument Type | Flame/Graphite Furnace AAS |
| Monochromator | Not Specified (Grating-based) |
| Optical System | Double-beam |
| Detector | Photomultiplier Tube (PMT) |
| Background Correction | Deuterium Lamp |
| Resolution | 0.3 nm |
| Sensitivity | 5 µg/mL Cu |
| Repeatability (RSD) | ≤0.3% |
| Detection Limit (Cu) | 0.006 mg/L |
| Compliance | ASTM D4294, ISO 11885, USP <231>, FDA Guidance for Elemental Impurities in Food |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AA-6300 |
| Instrument Type | Flame and Graphite Furnace Atomic Absorption Spectrometer (Configurable) |
| Compliance | Designed to meet ISO/IEC 17025 laboratory requirements for elemental analysis |
| Software | Shimadzu AA Solution software (v3.x or later, compatible with Windows 10/11) |
| Detection Principle | Atomic absorption spectroscopy based on hollow cathode lamp (HCL) excitation and monochromator-based wavelength isolation |
| Typical Detection Limits | Sub-pptr (ng/L) for graphite furnace mode |
| Wavelength Range | 190–900 nm |
| Spectral Bandwidth | 0.2, 0.7, 1.3, 2.0 nm selectable |
| Lamp Ports | 6-position automatic lamp turret |
| Safety Certifications | CE-marked, compliant with IEC 61010-1 for laboratory electrical safety |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AA-6300 |
| Wavelength Range | 185–900 nm |
| Monochromator | Aberration-Corrected Czerny-Turner |
| Slit Widths | 0.2, 0.7, 0.7L, 2.0L nm (4-position auto-switching) |
| Detector | Photomultiplier Tube (PMT, short-wavelength optimized) |
| Optical System | Flame mode — dual-beam optics |
| Background Correction | High-speed Self-Reversal (BGC-SR) |
| Lamp Holders | 6-position turret with simultaneous 2-lamp operation (1 preheat) |
| Lamp Modes | Emission, NON-BGC, BGC-SR, BGC-D₂ |
| Software Platform | Microsoft Windows 2000™ compatible acquisition and quantitation software |
| Warranty | 6 months limited parts and labor |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AA-6880 |
| Instrument Type | Flame and Graphite Furnace AAS |
| Optical System | Single-beam (automatically switches to double-beam mode for flame analysis |
| Monochromator | Grating-based, 0.3 nm spectral resolution |
| Detector | Solid-state photodiode array |
| Background Correction | Combined deuterium lamp and self-reversal (auto-absorption) method |
| Sensitivity | Flame: 0.1 µg/mL Pb |
| Graphite Furnace | 0.3 pg Pb |
| Detection Limit | Cu ≤ 0.006 mg/L (flame), sub-pg level for most elements (graphite furnace) |
| Precision (RSD) | < 0.3% for both flame and furnace modes |
| Lamp System | Integrated 8-position automatic lamp turret with dual-lamp simultaneous illumination capability |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AA-7000 |
| Instrument Type | Flame and Graphite Furnace AAS |
| Monochromator | Concave Grating |
| Optical System | Double-Beam |
| Detector | Solid-State Detector |
| Background Correction | Deuterium Lamp + Zeeman Effect |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Flame and Graphite Furnace AAS |
| Wavelength Range | 185–900 nm |
| Monochromator | Czerny-Turner with 1800 grooves/mm grating |
| Spectral Bandwidth | 0.2, 0.7, 1.3, 2.0 nm (4-step automatic switching) |
| Optical System | Dual-beam for flame mode |
| Detector | Photomultiplier tube (PMT) |
| Background Correction | Simultaneous deuterium lamp (BGC-D₂, 185–430 nm) and fast self-reversal (BGC-SR, 185–900 nm) |
| Lamp Holder | 6-position, dual-lamp operation (1 pre-heating) |
| Dimensions (AA-7000F) | 700 × 588 × 714 mm, 72 kg |
| Dimensions (AA-7000G) | 700 × 580 × 538 mm, 65 kg |
| Power Supply | AC 220 V ±10%, 50/60 Hz |
| Operating Environment | 10–35 °C, 20–80% RH (≤70% above 30 °C) |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Instrument Type | Flame AAS |
| Monochromator | Plane Grating |
| Optical System | Double-Beam |
| Detector | Photomultiplier Tube (PMT) |
| Background Correction | Automatic D₂/Zeeman |
| Resolution | 0.3 nm |
| Sensitivity | ≥ 0.3 A for 5 ppm Cu solution |
| Repeatability (RSD) | < 0.3% |
| Detection Limit (Cu) | ≤ 0.006 mg/L |
| Condition | Factory-Refurbished & Performance-Verified |
| Brand | Shimadzu |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Classification | Domestic (China-manufactured) |
| Model | AA-7800 |
| Price Range | USD 42,000 – 85,000 (FOB China) |
| Instrument Type | Flame and Graphite Furnace AAS |
| Monochromator | Plane Grating |
| Optical System | Double-Beam |
| Detector | Photomultiplier Tube (PMT) |
| Background Correction | Deuterium Lamp + Self-Reversal Method |
| Spectral Resolution | 0.1 nm |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AA6800 |
| Instrument Type | Atomic Absorption Spectrophotometer |
| Spectral Technique | Flame and Graphite Furnace AAS |
| Usage Duration | 1–2 years |
| Warranty | 1 year |
| Category | Imported Analytical Instrument |
| Compliance | Meets ISO/IEC 17025-relevant operational requirements for trace metal analysis |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Type | Electronic Universal Testing Machine |
| Model | AGX-V2 |
| Compliance | ASTM E1012 Class 10 Alignment |
| Sampling Rate | Up to 10 kHz (0.1 ms interval) |
| Load Accuracy Range | 1/2000 of full scale |
| External Input Channels | Up to 20 (analog/digital) |
| Safety Features | Interlocked polycarbonate safety enclosure, intelligent crosshead collision avoidance, real-time force monitoring,行程 limit switches, self-diagnostic system |
| Software | TRAPEZIUMX-V (5 modular editions) |
| Frame Rigidity | High-stiffness, high-coaxiality architecture |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Laboratory FTIR Microscope |
| Resolution | 0.25 cm⁻¹ |
| Signal-to-Noise Ratio | 30,000:1 |
| Optical Magnification Range | 330× continuous (macro to micro, 10 mm × 13 mm to 30 µm × 40 µm) |
| Detector | Liquid Nitrogen-Cooled MCT (Mercury Cadmium Telluride) |
| Automation | Fully Motorized XYZ Stage with Digital Image-Based Auto-Targeting |
| Software | IRsolution with Integrated Chemical Imaging and Automated Contaminant Identification Algorithm |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AIM-9000 |
| Detection Principle | Fourier Transform Infrared (FTIR) Spectroscopy with Reflectance/Transmission Microscopy |
| Optical Magnification Range | 330× continuous (macro to micro, 10 mm × 13 mm to 30 μm × 40 μm) |
| Automated Stage | Motorized XYZ stage with sub-micron positioning repeatability |
| Detector | Liquid Nitrogen-Cooled MCT (Mercury Cadmium Telluride) |
| Spectral Resolution | ≤ 4 cm⁻¹ (user-selectable down to 1 cm⁻¹) |
| Spectral Range | 7800–600 cm⁻¹ (mid-IR) |
| Imaging Mode | Point Mapping, Linear Mapping, Area Mapping (chemical imaging) |
| Software Platform | IRsolution with AI-assisted particle identification and multivariate spectral analysis |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | AIRsight |
| Instrument Type | Laboratory Benchtop System |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Category | Imported Instrument |
| Model | AIRsight |
| Price Range | USD 270,000 – 405,000 |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | ALTRACE |
| Configuration | Benchtop/Floor-standing |
| Instrument Type | Conventional ED-XRF |
| Application Scope | General-purpose |
| Elemental Range | Na (Z=11) to U (Z=92) |
| Quantification Range | 1 ppm – 99.99 wt% |
| Energy Resolution | <140 eV (Mn Kα) |
| Detector | Silicon Drift Detector (SDD) |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AOC-20i |
| Instrument Type | Gas Chromatography Autosampler |
| Compatible GC Models | GC-14A/B, GC-15A, GC-16A, GC-17A (Ver. 1/2/3), GC-1700, GC-18A, GC-2010, GC-2010Plus, GC-2014, GC-2025 |
| Power Configuration | Integrated (for GC-2010 series) or External (with optional mounting kit) |
| Sample Capacity | Up to 12 vials (single unit) |
| Operational Age | 6–8 years |
| Warranty | 12 months |
| Compliance | Designed for ISO/IEC 17025-compliant laboratories |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Product Type | Imported Instrument |
| Model | AOC-30 Series |
| Instrument Category | Gas Chromatography Autosampler |
| Maximum Sample Capacity | 150 positions (1.5 mL vials) |
| Minimum Injection Volume | 10 nL |
| Injection Needle Volume | Standard 10 µL (exchangeable with optional syringes) |
| Positioning Accuracy | Adjustable |
| Motion System | XYZ three-axis robotic arm |
| Needle Wash Modes | Six preconfigured wash methods + user-defined protocols |
| Replicate Injections per Sample | Up to 99 times |
| Brand | Shimadzu |
|---|---|
| Origin | Switzerland |
| Manufacturer | Shimadzu Corporation |
| Product Type | Multifunctional Autosampler |
| Model | AOC-6000 Plus |
| Motion System | XYZ 3-axis robotic arm |
| Needle Wash | Internal & external wall cleaning |
| Repeat Injection Capability | Unlimited |
| Compatible Sample Introduction Modes | Liquid injection, headspace (HS), solid-phase microextraction (SPME), SPME Arrow, and ITEX-DHS |
| Software Integration | Native control via LabSolutions and GCMSsolution |
| Compliance | Designed for GLP/GMP environments with audit-trail-ready operation (21 CFR Part 11 compliant configuration available) |
| Sample Processing Functions | Automated standard curve preparation, internal standard addition, on-line derivatization, μSPE, and sequential method switching |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model Series | AP |
| Instrument Type | Analytical Balance |
| Capacity Range | 2 g – 5 g |
| Readability | 0.1 mg (0.0001 g) |
| Interface | Standard USB 2.0 |
| Application Focus | Pharmaceutical Sample Preparation, Buffer Solution Weighing, GLP/GMP-Compliant Weighing Tasks |
| Electrostatic Mitigation | Integrated Active Static Elimination System |
| Compliance | Designed to support ISO/IEC 17025, USP <41>, and FDA 21 CFR Part 11 data integrity requirements |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | AP135W |
| Instrument Type | Analytical Balance |
| Maximum Capacity | 135 g |
| Readability | 0.01 mg |
| Repeatability | 0.05 mg |
| Calibration | Internal |
| Sensor Technology | UniBloc AP Monolithic Sensor |
| Static Elimination Option | STABLO-AP Ionizer |
| Software Integration | LabSolutions Balance |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AP135W |
| Instrument Type | Ultra-Micro Balance |
| Maximum Capacity | 135 g |
| Readability | 0.01 mg (10 µg) |
| Repeatability | 0.05 mg |
| Calibration | Internal |
| Compliance | ISO/IEC 17025, USP <41>, ASTM E898, GLP/GMP-ready |
| Connectivity | USB interface for data export and peripheral integration |
| Operating Environment | 18–26°C, 30–70% RH (non-condensing) |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Product Type | Imported Analytical Balance |
| Model | AP224W |
| Maximum Capacity | 220 g |
| Readability | 0.1 mg |
| Repeatability | ±0.1 mg |
| Calibration | Internal and External |
| Compliance | ISO/IEC 17025, USP <41>, ASTM E898, GLP/GMP-ready |
| Connectivity | USB interface for data export, image capture (BMP), and peripheral integration |
| Key | Brand: Shimadzu |
|---|---|
| Origin | Japan |
| Model | AP225W |
| Maximum Capacity | 220 g |
| Readability | 0.01 mg |
| Repeatability | ≤0.05 mg |
| Sensor Technology | UniBloc AP |
| Stabilization Time | 1.5 s (for 1 mg load) |
| Interface | USB + RS-232C |
| Compliance | ISO/IEC 17025, USP <41>, FDA 21 CFR Part 11 (with Labsolutions Balance), GLP/GMP-ready printing |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model | AP225W-AD |
| Instrument Type | Ultra-Micro Balance |
| Maximum Capacity | 220 g |
| Readability | 0.01 mg |
| Repeatability | 0.01 mg (at 5 g load), 0.015 mg (at ~20 g), 0.03 mg (at ~100 g) |
| Calibration | Internal motorized auto-calibration with optional external weight support |
| Display | OLED matrix display (±85° viewing angle) |
| Auto-Door | Motorized full-glass door with proximity-sensing activation |
| Non-Contact Control | Dual side-mounted capacitive sensors for function selection |
| Static Elimination | Integrated STABLO™-AP electrostatic neutralizer |
| Operating Environment | 5–40 °C, 20–85 % RH |
| Linearity Error | ±0.1 mg |
| Minimum Weighing Value | 20 mg |
| Sensitivity Temperature Coefficient | ±2 ppm/°C (10–30 °C) |
| Pan Diameter | Ø91 mm |
| Dimensions (W×D×H) | 212 × 411 × 345 mm (incl. power unit) |
| Weight | 9.7 kg |
| Connectivity | RS-232C, USB-A (host), USB-B (device) |
| Brand | Shimadzu |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Analytical Balance |
| Capacity | 220 g |
| Readability | 0.1 mg |
| Max Weighing Range | 320 g |
| Repeatability | ±0.1 mg |
| Calibration | Internal & External |
| Interface | USB + RS-232C |
| Environmental Compensation | PSC (Proactive Self-Calibration) Temperature-Triggered Alert |
| Optional Accessories | STABLO™-AP Electrostatic Discharger, Smart Stand Holder |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Model Series | ATX & ATY |
| Measurement Principle | Electromagnetic Force Compensation (EMFC) |
| Max Capacity | 220 g (ATX224/ATY224) to 62 g (ATY64) |
| Minimum Readability | 0.1 mg |
| Repeatability | ±0.1 mg |
| Linearity Error | ±0.2 mg |
| Stabilization Time | ≤2.5 s |
| Pan Size | 91 mm diameter |
| Calibration | Internal Auto-Calibration with External Weights |
| Compliance | ISO/IEC 17025, ASTM E898, USP <41>, GLP/GMP-ready |
| Interface | RS-232, USB (optional), Direct Windows Data Transfer (No Driver Required) |
| Environmental Adaptation | Adjustable Filter Settings (Stability/Response Trade-off) |
| Sensor Architecture | Monolithic UniBloc Dual-Lever EMFC Sensor |
| Key | Brand: Shimadzu |
|---|---|
| Origin | Japan |
| Model | AU-SGM |
| Type | Analytical Density Balance |
| Maximum Capacity | 200 g |
| Readability | 0.1 mg (0.0001 g) |
| Density Resolution | 0.0001 g/cm³ |
| Repeatability | 0.0001 g/cm³ |
| Calibration | Manual or Automatic (Selectable) |
| Principle | Archimedean Buoyancy Method (Liquid Immersion) |
| Compliance | Designed for ISO/IEC 17025-compliant laboratories, compatible with GLP/GMP documentation workflows |