Sylab
Filter
Showing all 3 results
| Brand | Sylab |
|---|---|
| Origin | France |
| Model | IF2000G |
| Max Furnace Temperature | 1600 °C (Peak 1650 °C) |
| Operating Temp Range | 200–1550 °C |
| Atmosphere Control | Oxidizing/Reducing (Software-Regulated) |
| Sample Capacity | 2 molds (simultaneous) or 4 ASTM/ISO-compliant cones (6×6×19 mm) or 4 cylinders (3×3 mm) |
| Imaging System | CCD camera with RS232C interface, 5 °C interval image capture |
| Temp Resolution | 1 °C (S-type thermocouple at furnace base) |
| Temp Accuracy | ±20 °C of setpoint |
| Image Analysis Resolution | ±2% of full field |
| Data Output | Digital fusion curves, annotated stills (initial deformation, shrinkage, hemisphere, sphere, fluid), dimensional metrics (width, height, roundness), thermal ramp profiles |
| Compliance | ASTM D1857, ISO 540, DIN 51730, AFNOR M03-007, AS 1038.19, CEN/TS 15148 |
| Brand | Sylab |
|---|---|
| Origin | France |
| Model | IF2000G |
| Maximum Furnace Temperature | 1650 °C |
| Operating Temperature Range | 200–1550 °C |
| Heating Rate | 4–12 °C/min (programmable) |
| Temperature Accuracy | ±5 °C at 1064 °C (verified with 99.98% pure gold wire) |
| Image Resolution | 1280 × 1024 pixels |
| Frame Rate | up to 30 fps |
| Gas Flow Control | N₂, air, O₂/CO₂ (oxidizing), CO/CO₂ (reducing) |
| Sample Capacity | 4 × ASTM/ISO/AFNOR/EDF pyramidal samples (6×6×19 mm) OR 4 × DIN/CEN/Chinese cylindrical samples (3×3 mm) OR 2 × custom molds |
| Safety | Integrated CO sensor with audible alarm and automatic gas shutoff |
| Exhaust | 160 CFM, 4-inch (10.2 cm) duct interface |
| Power Supply | 215–253 V~, 50/60 Hz, single-phase, 30 A |
| Dimensions (W×D×H) | 60 × 80 × 40 cm |
| Net Weight | 70 kg |
| Compliance | ASTM D1857, ISO 540, CEN/TS 15104, AFNOR NF M 03-016, BS EN 606, AS 1038.12 |
| Brand | Sylab |
|---|---|
| Origin | France |
| Model | TGA3000 |
| Sample Capacity | 19 positions |
| Max Sample Weight | 5 g (customizable) |
| Balance Resolution | 0.1 mg |
| Temperature Programmability | Ramp rate, start/end temperature, gas flow control, lid actuation sequence |
| Software Platform | Windows-based proprietary control and analysis suite |
| Compliance | Designed for ASTM D3172, ASTM D3174, ASTM D3175, ISO 1171, ISO 562, ISO 589 |