Vecstar
Filter
Showing all 8 results
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | AF-Series |
| Furnace Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1200 °C |
| Max Continuous Operating Temperature | 1150 °C |
| Chamber Volume | 5.7 L / 7.2 L (selectable) |
| Max Power Consumption | 3 kW |
| Temperature Uniformity | ±1 °C at 1100 °C |
| Control System | Solid-State Relay (SSR) with Digital PID Controller |
| Heating Element | High-Purity Kanthal A1 Resistance Wire Wound on Ceramic Core |
| Insulation | Dual-Layer High-Performance Ceramic Fiber Insulation |
| Door Mechanism | Vertical Lift with Safety Interlock |
| Exhaust | Integrated Aluminum Chimney with Passive Ventilation Port |
| Over-Temperature Protection | Independent Bimetallic Cut-Out |
| External Casing | Corrosion-Resistant Anodized Aluminum |
| Power Supply | Single-Phase, 230 V AC, 50/60 Hz |
| Internal Dimensions | 350 × 350 × 410 mm (W × D × H) |
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | BRF14/10 |
| Instrument Type | Benchtop Box-Type Muffle Furnace |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 7.4 kW |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions (W×D×H) | 180 × 310 × 190 mm |
| Chamber Volume | 10 L |
| Door Operation | Manual or Motorized Vertical Lift |
| Safety Features | Over-Temperature Protection, Electronic Door Interlock, Dual-Wall Insulated Casing |
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | BRF15/10 |
| Type | Vertical Lift Muffle Furnace |
| Max Temperature | 1500 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 20 kW |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 600 × 750 × 450 mm (W × D × H) |
| Chamber Volume | 203 L |
| Heating Rate to 1500 °C | Typical ≤90 min (dependent on load and ambient conditions) |
| Safety Features | Overtemperature Protection, Electromechanical Door Lock, Dual-Wall Insulated Casing |
| Compliance | Designed for GLP/GMP-aligned laboratory environments |
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | EF2 |
| Furnace Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1100 °C |
| Continuous Operating Temperature | Up to 1150 °C (per specification sheet) |
| Temperature Uniformity | ±1 °C (at setpoint, within working zone) |
| Control Accuracy | ±1 °C |
| Max Power | 4000 W |
| Heating Rate to Max Temp | 40 °C/min (typical, no-load) |
| Internal Dimensions | 350 × 350 × 410 mm (L×W×H) |
| Internal Volume | ~5.0 L |
| Heating Element | High-Grade Kanthal A1 Resistance Wire Wound on Ceramic Core |
| Insulation | Dual-Layer High-Density Ceramic Fiber + Refractory Brick Composite |
| Door Mechanism | Vertical Lift with Safety Interlock |
| Exhaust Port | Integrated Stainless Steel Chimney (Ø50 mm) |
| Controller Options | PID Digital Temperature Controller with Ramp/Soak Programming, Optional Data Logging & RS485 Interface |
| Compliance | CE, UKCA, IEC 61000-6-3, IEC 61000-6-4, EN 60519-1 (Electrical Safety for Industrial Electroheating Equipment) |
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Equipment Type | Box-Type Muffle Furnace |
| Maximum Operating Temperature | 1100 °C |
| Continuous Operating Temperature | 1050 °C |
| Internal Dimensions (W×D×H) | 120 mm × 180 mm × 180 mm |
| Volume | 3.9 L |
| Temperature Uniformity | ±5 °C at 1100 °C |
| Control Accuracy | ±0.3 °C |
| Heating Method | Kanthal A1 Resistance Wire Wound on High-Purity Alumina Ceramic Chamber |
| Power Supply | Single-Phase, 230 V AC |
| Rated Power | 5.5–11.5 kW |
| Thermal Insulation | Dual-Layer Low-Heat-Mass Ceramic Fiber + Refractory Brick |
| Exhaust System | Integrated Aluminum Chimney with Optional Flow Control |
| Safety Features | Door-Interlocked SSR Power Cut-off, Independent Over-Temperature Protection (R-Type Thermocouple), UL/CE-Compliant Enclosure |
| Key | Brand: Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | VCTF |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±2 °C |
| Max Power | 1250 W |
| Ramp Time to 1200 °C | ~40 min |
| Heating Method | Resistance Wire (NiCr) |
| Chamber Dimensions (ID) | 25 mm Ø × 200 mm L |
| Power Supply | Single-Phase AC |
| Configuration | Dual-Orientation (Horizontal or Vertical Mounting) |
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | VCTF |
| Maximum Temperature | 1600°C |
| Temperature Uniformity | ±3°C |
| Rated Power | 2100 W |
| Heating Rate to Max Temp | 60 min |
| Heating Method | Resistance Wire (Kanthal A1) |
| Internal Chamber Dimensions | 560 × 605 × 315 mm (L×W×H) |
| Power Supply | Single-Phase AC |
| Control Precision | ±3°C |
| Configuration | Three Independent Heating Zones |
| Brand | Vecstar |
|---|---|
| Origin | United Kingdom |
| Model | Vecstar XF |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1800 °C |
| Temperature Uniformity | ±2 °C |
| Max Power | 11.5 kW |
| Ramp Time to Max Temp | 40 min |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 200 × 200 × 350 mm (L × W × H) |
| Chamber Volume | 3.8–14 L (configurable) |
| Continuous Operating Temperature | 1750 °C |
| Power Control | Solid-State Relay (SSR) |
| Safety Features | Door-Interlocked Power Cut-off, Over-Temperature Protection |
| Exhaust System | Integrated Aluminum Chimney |
| Insulation | Dual-Layer High-Performance Ceramic Fiber |