Wetlabs
Filter
Showing all 6 results
| Brand | Wetlabs |
|---|---|
| Origin | USA |
| Model | AC-S |
| Spectral Range | 400–730 nm |
| Spectral Resolution | 4 nm |
| Bandpass | 15 nm per channel |
| Number of Output Bands | 80 ± 5 |
| Path Length | 10 cm or 25 cm |
| Beam Diameter | 8 mm |
| Linearity | ≥99% R² |
| Accuracy (400–449 nm) | ±0.005 m⁻¹ (typ.), ±0.012 m⁻¹ (max) @ 4 Hz |
| Accuracy (450–730 nm) | ±0.001 m⁻¹ (typ.), ±0.003 m⁻¹ (max) @ 4 Hz |
| Dynamic Range | 0.001–10 m⁻¹ |
| Sampling Rate | 4 Hz (standard) |
| Operating Temperature | 0–30 °C |
| Pressure Rating | 500 m or 5000 m (AC-S 5000 titanium variant) |
| Power Input | 10–35 VDC |
| Current Draw | 0.37 A @ 12 V |
| Communication Interfaces | RS-232, RS-422, RS-485 |
| Connector | MCBH6MP |
| Dimensions (standard) | Ø10.4 cm × 77 cm |
| Dimensions (5000) | Ø9.9 cm × 75.8 cm |
| Air Weight (standard) | 5.9 kg |
| Air Weight (5000) | 5.3 kg |
| In-Water Weight (standard) | 0.8 kg |
| In-Water Weight (5000) | 0.3 kg |
| Brand | Wetlabs |
|---|---|
| Origin | USA |
| Model | ECO-CD |
| Excitation Wavelength | 370 nm (high-efficiency red LEDs) |
| Emission Detection | 460 nm (silicon photodiode) |
| Measurement Range | 0–500 µg/L (as quinine sulfate equivalent, QSE) |
| Detection Limit | 0.09 µg/L |
| Housing Material | Acetal polymer (seawater-corrosion resistant) |
| Dimensions | Ø63 × 127 mm |
| Weight | 0.4 kg (air), 0.02 kg (buoyant in seawater) |
| Pressure Rating | Standard 600 m, optional 6000 m |
| Digital Output | RS-232, 19200 baud, 12-bit resolution |
| Analog Output | 0–5 V |
| Sampling Rate | 8 Hz |
| Power Input | 7–15 VDC |
| Typical Current Draw | 80 mA (active), 85 µA (sleep mode) |
| Internal Memory | Optional, 65,000 samples |
| Internal Battery | Optional |
| Anti-fouling | Optional copper-brush wiper (programmable cycle) |
| Connector | SUBCONN Micro 5-pin male |
| Compliance | IP68, RoHS, CE-marked for marine environmental instrumentation |
| Brand | Wetlabs |
|---|---|
| Origin | USA |
| Model | ECO-Fl |
| Measurement Principle | In-situ optical fluorescence detection at 470 nm excitation / 695 nm emission |
| Detection Range | 0–60, 0–125, or 0–250 µg/L (user-selectable) |
| Sensitivity | 0.02 µg/L |
| Housing Material | Acetal polymer (seawater-corrosion resistant) |
| Dimensions | Ø63 × 127 mm |
| Depth Rating | 600 m standard, optional 6000 m |
| Weight | 0.4 kg in air / 0.02 kg in water |
| Digital Output | RS-232, 19200 baud, 12-bit resolution |
| Analog Output | 0–5 V |
| Internal Data Logging | Optional, up to 65,000 samples |
| Power Input | 7–15 VDC |
| Current Draw | 80 mA (active), 85 µA (sleep mode) |
| Sampling Rate | 8 Hz |
| Anti-fouling | Optional copper-brush wiper with programmable cycle |
| Connector | SUBCONN Micro 5-pin male |
| Optional Accessories | Handheld terminal, biofouling barrier, integrated battery pack |
| Brand | Wetlabs |
|---|---|
| Origin | USA |
| Model | ECO-NTU |
| Type | Submersible Online Turbidimeter |
| Measurement Ranges | 0–70 NTU, 0–200 NTU, or 0–1000 µg/L (selectable) |
| Resolution | 0.01 NTU |
| Accuracy | ±0.01 NTU |
| Wavelength | 700 nm |
| Housing Material | Polyoxymethylene (POM), seawater-corrosion-resistant |
| Dimensions | Ø63 × 127 mm |
| Weight | 0.4 kg (air), 0.02 kg (water) |
| Depth Rating | Standard 600 m, optional 6000 m |
| Output | RS-232 (19200 baud), 0–5 V analog |
| Digital Resolution | 12-bit |
| Sampling Rate | 8 Hz |
| Internal Data Logging | Optional, up to 65,000 samples |
| Power Input | 7–15 VDC |
| Current Draw | 80 mA (active), 85 µA (sleep mode) |
| Connector | SUB-CONN Micro 5-pin male |
| Optional Features | Internal Li-ion battery, anti-fouling copper brush (programmable cycle), biofouling guard, handheld terminal interface |
| Brand | Wetlabs |
|---|---|
| Origin | USA |
| Model | ECO-PC |
| Measurement Principle | Optical Fluorescence (630 nm excitation / 680 nm emission) |
| Detection Target | Phycocyanin (PC) as proxy for cyanobacterial biomass |
| Measurement Range | 0–230 µg/L PC (optional calibration for Chl-a equivalent) |
| Sensitivity | 0.03 µg/L PC |
| Housing Material | Acetal polymer (seawater-resistant) |
| Dimensions | Ø63 × 127 mm |
| Depth Rating | Standard 600 m, optional 6000 m |
| Weight | 0.4 kg (air), 0.02 kg (water) |
| Connector | SUBCONN Micro 5-pin male |
| Power Input | 7–15 VDC |
| Operating Current | 80 mA (active), 85 µA (sleep mode) |
| Sampling Rate | 8 Hz |
| Digital Output | RS-232 @ 19200 baud, 12-bit resolution |
| Analog Output | 0–5 V (user-configurable scaling) |
| Internal Data Logging | Optional, 65,000 samples |
| Internal Battery | Optional |
| Anti-fouling | Optional copper-brush wiper (programmable cycle) |
| Compliance | IP68, RoHS, CE-marked for marine environmental use |
| Interface Compatibility | Direct integration with Sea-Bird CTDs, Nortek AD2CP, and other oceanographic platforms |
| Brand | Wetlabs |
|---|---|
| Origin | USA |
| Model | ECO-Triplet |
| Measurement Parameters | Turbidity, Chlorophyll-a Fluorescence, CDOM Fluorescence |
| Turbidity Range | 0–1000 NTU (Resolution: 0.01 NTU) |
| Chlorophyll-a Range | 0–250 µg/L (Detection Limit: 0.025 µg/L) |
| CDOM Range | 0–375 µg/L (Detection Limit: 0.28 µg/L) |
| Housing Material | Polyacetal (Acetal Copolymer), Seawater-Corrosion Resistant |
| Dimensions | Ø63 × 127 mm |
| Weight | 0.4 kg (air), 0.02 kg (buoyant in seawater) |
| Pressure Rating | 600 m (custom depths available) |
| Digital Output | RS-232, 19200 baud, 12-bit resolution |
| Analog Output | 0–5 V (user-configurable per channel) |
| Internal Data Logging | Optional, up to 77,000 samples |
| Power Supply | 7–15 VDC |
| Operating Current | 60 mA (active), 140 µA (sleep mode) |
| Sampling Rate | 4 Hz |
| Connector | SUBCONN Micro-5-pin male |
| Anti-fouling Option | Rotating copper brush (programmable cleaning interval) |
| Optional Features | Integrated battery pack, biofouling guard, CTD-mounting interface (compatible with SEA-BIRD CTD systems) |