Zhonghuipu
Filter
Showing 1–30 of 83 results
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TH-6000PSA |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–6000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 3600 W |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Input Voltage | 220 V ±10% |
| Dimensions (L×W×H) | 1200 × 750 × 900 mm (height excludes casters) |
| Net Weight | ~150 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10 |
| Output Flow Rate | 0–10 L/min at 0.4 MPa |
| Output Pressure Range | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Air Tank Capacity | 8 L |
| Tank Material | 1.5 mm thick 304 stainless steel |
| Cooling & Drying | Dual-fan coil heat exchanger with condensate removal |
| Drainage System | Two-stage automatic condensate discharge |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10PSA |
| Output Flow | 0–10 L/min at 0.4 MPa |
| Output Pressure | 0–0.4 MPa |
| Dew Point | < −10 °C |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Input Voltage | 220 V ±10% |
| Dimensions (L×W×H) | 400 × 425 × 650 mm |
| Net Weight | ~45 kg |
| Operating Environment | 5–40 °C, RH ≤85% |
| Filtration | Dual-stage particulate + PSA desiccant drying |
| Compressor | Thomas (USA) oil-free rocking piston type |
| Pneumatic Components | SMC (Japan), Airtac (Taiwan) |
| Tank & Filter Housing | 304 stainless steel & aluminum alloy |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | A-20 |
| Price | Upon Request |
| Output Flow Rate | 0–35 L/min at 0.4 MPa |
| Output Pressure | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 750 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-30PSA |
| Output Flow Rate | 0–35 L/min |
| Output Pressure | 0–0.5 MPa |
| Dew Point | ≤ −40 °C |
| Particle Size Filtration | < 0.01 µm |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 2500 W |
| Dimensions (L×W×H) | 90 × 60 × 75 cm |
| Weight | ~110 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-30PSAD |
| Output Flow | 0–22 L/min at 0.7 MPa (for nitrogen generator supply) |
| Output Pressure | 0–0.7 MPa (factory-set at 0.4 MPa) |
| Pressure Stability | < 0.003 MPa |
| Dew Point | ≤ −22 °C |
| Operating Environment | 5–40 °C, RH ≤ 85% |
| Power Consumption | 1200 W |
| Input Voltage | 220 V ±10% |
| Construction | 304 Stainless Steel Tanks & Filtration Components |
| Air Purity Class | ISO 8573-1 Class 2:2:2 (solid particles, water, oil) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | APH-500 |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 250 W |
| Dimensions (L×W×H) | 340 × 200 × 385 mm |
| Net Weight | 15 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | <85% |
| Power Supply | 220 V ±10%, 50 Hz |
| Pressure Stability | <0.001 MPa |
| Integrated External Water Reservoir Capacity | 15 L |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | ATH-3000 |
| Pricing | Upon Request |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.7 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1500 W |
| Oxygen Content in H₂ Output | ≤3 ppm |
| Dew Point of H₂ Output | ≤−55 °C |
| Input Power Supply | 220 V ±10%, 50 Hz |
| Operating Ambient Temperature | 1–40 °C |
| Relative Humidity | <85% RH |
| Dimensions (W×D×H) | 400 × 600 × 600 mm |
| Net Weight | ~50 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ATH-500 |
| Hydrogen Generation Principle | Pure-Water Electrolysis |
| Output Flow Rate | 0–500 mL/min |
| Output Pressure | 0–100 psi (≈0.7 MPa) |
| Hydrogen Purity | 99.9995% |
| Power Consumption | 300 W |
| Pressure Stability | <0.001 MPa |
| Input Voltage | 220 V ±10%, 50 Hz |
| Operating Temperature | 1–40 °C |
| Relative Humidity | <85% RH |
| Dimensions (L×W×H) | 570 × 185 × 400 mm |
| Net Weight | ~18 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | DAS-2 |
| Pricing | Upon Request |
| Standard Gas Input Channels | 1–4 |
| Diluent Gas Flow Range | 0–5 L/min (customizable) |
| Standard Gas Flow Range | 0–100 mL/min (customizable) |
| Flow Measurement Accuracy | ±1% F.S. |
| Flow Control Repeatability | ±0.2% F.S. |
| Linearity Accuracy | ±0.5% F.S. |
| Operating Ambient Temperature | 5–50 °C |
| Dimensions (W×D×H) | 320×200×250 mm |
| Power Supply | 220 VAC, 50 Hz |
| Human-Machine Interface | Intelligent Touchscreen |
| Operating Pressure Range | 0.05–0.3 MPa |
| Tubing Material | PTFE |
| Fitting Type | M8×1 (customizable) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DH-300 |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.5 MPa |
| Hydrogen Purity | 99.99999% |
| Power Consumption | 300 W |
| Dimensions (W×D×H) | 420 × 200 × 350 mm |
| Net Weight | 15 kg |
| Pressure Stability | < 0.0001 MPa |
| Input Power | 220 V ±10%, 50 Hz |
| Sealing Material | Low-Sulfur Silicone O-Rings |
| Purification Method | Palladium Alloy Membrane Filtration |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | DS-2 |
| Pricing | Upon Request |
| Standard Gas Inlets | 1–4 channels |
| Diluent Flow Range | 0–5 L/min (customizable) |
| Standard Gas Flow Range | 0–100 mL/min (customizable) |
| Flow Measurement Accuracy | ±1% FS |
| Flow Control Repeatability | ±0.2% FS |
| Linearity Accuracy | ±0.5% FS |
| Operating Temperature | 5–50 °C |
| Dimensions | 480 × 450 × 177 mm (19″ 4U rack-mount chassis) |
| Power Supply | 220 VAC, 50 Hz |
| Human-Machine Interface | Integrated touchscreen HMI |
| Operating Pressure | 0.05–0.3 MPa |
| Tubing Material | PTFE |
| Fitting Size | 6 mm OD (customizable) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GCD-1000 |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 400 W |
| Pressure Stability | < 0.001 MPa |
| Input Power | 220 V ±10%, 50 Hz |
| Operating Temperature | 1–40 °C |
| Relative Humidity | < 85% RH |
| Dimensions (W×D×H) | 460 × 370 × 360 mm |
| Net Weight | ~20 kg |
| Filtration | Dual stainless-steel filters with trace oxygen scavenger (pre-activated) |
| Sealing Material | Low-sulfur silicone rubber gaskets |
| Safety Features | Automatic anti-alkali-backflow protection, real-time pressure/flow monitoring |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCD-2000 |
| Hydrogen Generation Principle | Aqueous Alkaline Electrolysis |
| Output Flow Rate | 0–2000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1 kW |
| Pressure Stability | < 0.001 MPa |
| Input Voltage | 220 V ±10%, 50 Hz |
| Operating Temperature | 1–40 °C |
| Relative Humidity | < 85% RH |
| Dimensions (W×D×H) | 460 × 320 × 500 mm |
| Net Weight | ~30 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCD-3000B |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1300 W |
| Dimensions (D×W×H) | 600 × 450 × 950 mm |
| Net Weight | 67 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | < 85 % RH |
| Input Power | 220 V ±10 %, 50 Hz |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GCD-3000PSA |
| Hydrogen Generation Principle | Alkaline Electrolysis |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Hydrogen Purity | 99.999% |
| Power Consumption | 1500 W |
| Dimensions (W×D×H) | 600 × 450 × 950 mm |
| Net Weight | 73 kg |
| Operating Temperature | 1–40 °C |
| Relative Humidity | ≤85% RH |
| Pressure Stability | <0.001 MPa |
| Input Voltage | 220 V ±10% |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GCK3302 / GCK3308 |
| Output Flow Rate | 0–5000 mL/min (up to 8000 mL/min at 0.4 MPa) |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Operating Environment | 0–45 °C, RH ≤ 85% (non-dusty, non-corrosive atmosphere) |
| Power Consumption | 250 W |
| Input Voltage | 220 V ± 10% |
| Dimensions (W×D×H) | 480 × 260 × 350 mm |
| Net Weight | ~25 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | GCN-1000 |
| Instrument Type | Nitrogen Generator |
| Output Flow Rate | 0–1000 mL/min |
| Output Pressure | 0–0.4 MPa (air-source dependent) |
| Nitrogen Purity | <3 ppm O₂, dew point ≤ −56 °C |
| Nitrogen Dew Point | ≤ −56 °C |
| Pressure Stability | <0.003 MPa (subject to inlet air stability) |
| Power Supply | 220 V ±10%, 50 Hz |
| Power Consumption | 150 W |
| Operating Environment | 1–40 °C, RH <85% |
| Dimensions (W×D×H) | 460 × 360 × 350 mm |
| Net Weight | ~20 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HA-300 / HA-500 |
| H₂ Purity | 99.999% |
| H₂ Flow Range | 0–300 mL/min (HA-300) / 0–500 mL/min (HA-500) |
| H₂ Output Pressure | 0.4 MPa |
| Air Flow Range | 0–2000 mL/min |
| Air Output Pressure | 0.4 MPa |
| Power Consumption | 300 W (HA-300) / 400 W (HA-500) |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | ~28 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HA-3380 |
| Quotation | Available Upon Request |
| Hydrogen Flow Rate | 0–300 mL/min (optional 500 mL/min) |
| Hydrogen Purity | 99.999% |
| Hydrogen Output Pressure | 0.4 MPa (4 kgf/cm²) |
| Hydrogen Pressure Stability | < 0.001 MPa |
| Air Flow Rate | 0–2 L/min (optional 5 L/min) |
| Air Output Pressure | 0–0.4 MPa |
| Operating Environment | 5–40 °C, ≤85% RH |
| Max Power Consumption | 680 W (standard configuration) |
| Input Voltage | 220 V ±10% AC |
| Dimensions (L×W×H) | 350 × 400 × 730 mm |
| Net Weight | ~43 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HA-3680 |
| H₂ Flow Rate | 0–300 mL/min |
| H₂ Purity | 99.999% |
| H₂ Output Pressure | 0.4 MPa (4 kgf/cm²) |
| H₂ Pressure Stability | < 0.001 MPa |
| Zero Air Flow Rate | 0–1.5 L/min |
| Zero Air Pressure | 0–0.4 MPa |
| Hydrocarbon Content in Zero Air | < 20 ppb |
| Particulate Size in Zero Air | < 0.01 µm |
| Operating Ambient | 1–35 °C, RH ≤ 85% |
| Max Power Consumption | 680 W |
| Input Voltage | 220 V ± 10% |
| Dimensions (L×W×H) | 350 × 400 × 730 mm |
| Net Weight | ~43 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HA5500 |
| Pricing | Upon Request |
| Hydrogen Purity | >99.9995% |
| Hydrogen Flow Rate | 0–500 mL/min |
| Hydrogen Output Pressure | 0.4 MPa |
| Zero Air Flow Rate | 0–5000 mL/min |
| Total Hydrocarbon Content (THC) | <10 ppb |
| Zero Air Output Pressure | 0.1–0.6 MPa (air supply pressure dependent |
| Zero Air Dew Point | <−20 °C |
| Particulate Filtration | <0.01 µm |
| Operating Ambient | 1–40 °C, <80% RH |
| Power Consumption | 500 W |
| Dimensions (L×W×H) | 600 × 430 × 177 mm |
| Net Weight | ~15 kg |
| Brand | ZhonghuiPu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Semi-Automatic |
| Sample Vial Heating Range | 40–200 °C (customizable up to 330 °C) |
| Valve Heating Range | 40–200 °C (customizable up to 330 °C) |
| Transfer Line Heating Range | 40–200 °C (customizable up to 330 °C) |
| Pressurization Time | 0–10 min |
| Sampling Time | 0–10 min |
| Injection Time | 0–10 min |
| Loop Volume | 1 mL (customizable up to 3 mL) |
| Temperature Control Accuracy | ±1 °C |
| Vial Capacity | 10 positions (customizable to 12) |
| Vial Sizes | 10 mL and 20 mL |
| RSD | ≤1.5% (for 100 ppm ethanol in water) |
| Power Consumption | Peak 350 W, Average 100 W |
| Dimensions (L×W×H) | 500×180×400 mm |
| Net Weight | ~18 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automatic |
| Sample Vial Capacity | 24 positions |
| Vial Sizes | 10 mL and 20 mL |
| Oven Temperature Range | 40–200 °C (optional up to 250 °C) |
| Valve & Transfer Line Temperature Range | 40–200 °C (optional up to 330 °C) |
| Quantitative Loop Volume | 1 mL (customizable up to 3 mL) |
| Temperature Control Accuracy | ±1 °C |
| RSD | ≤1.5% (for 100 ppm ethanol in water) |
| Power Consumption | Peak 350 W |
| Dimensions (L×W×H) | 430 × 270 × 500 mm |
| Net Weight | ~20 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | HS-3 |
| Instrument Type | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Sample Vial Heating Range | 40–200 °C (customizable up to 250 °C) |
| Valve Temperature Control Range | 40–200 °C (customizable up to 330 °C) |
| Sample Transfer Line Temperature Control Range | 40–200 °C (customizable up to 330 °C) |
| Quantitative Loop Volume | 1 mL (customizable up to 3 mL) |
| Temperature Control Accuracy | ±1 °C |
| Vial Capacity | 15 positions |
| Heated Vial Positions | 1 |
| Compatible Vial Sizes | 10 mL and 20 mL |
| Equilibration Time | 0–100 min |
| Pressurization Time | 0–10 min |
| Sampling Time | 0–10 min |
| Loop Equilibration Time | 0–10 min |
| Injection Time | 0–10 min |
| Analysis Time | 0–100 min |
| Purge Time | 0–100 min |
| RSD | ≤1.5% (for 100 ppm ethanol in water) |
| Power Consumption | Peak 350 W |
| Dimensions (L×W×H) | 430 × 270 × 500 mm |
| Net Weight | ~20 kg |
| Sample Path Materials | RESTEK-passivated, Siltek®/Sulfinert®-treated 316L stainless steel tubing |
| Sampling Method | Positive-pressure headspace sampling |
| GC Interface | TTL/RS-232/USB |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Type | Domestic |
| Model | HS-5 |
| Instrument Category | Static Headspace Sampler |
| Automation Level | Fully Automated |
| Vial Heating Range | 40–200 °C (customizable up to 330 °C) |
| Valve Heating Range | 40–210 °C (customizable up to 330 °C) |
| Sample Transfer Line Heating Range | 40–220 °C (customizable up to 330 °C) |
| Quantitation Loop Volume | 1 mL (customizable up to 3 mL) |
| Temperature Control Accuracy | ±1 °C |
| Vial Capacity | 40 positions |
| Compatible Vial Sizes | 10 mL and 20 mL |
| Simultaneous Heating Capacity | 12 vials |
| RSD | <1.2% (for 100 ppm ethanol in water) |
| Power Consumption | Peak 450 W |
| Dimensions (L×W×H) | 500 × 575 × 505 mm |
| Net Weight | ~36 kg |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | JH-1 |
| Price | Upon Request |
| Temperature Control Range | 40–380 °C |
| Gas Flow Rate | 10–1000 mL/min |
| Number of Adsorption Tubes Supported | 10 |
| Temperature Accuracy | ±1 °C |
| Aging Timer | Up to 99 h 59 min 59 s |
| Power Consumption | 500 W |
| Electrical Supply | 220 V, 50 Hz |
| Compatible Tube Dimensions | Outer diameter 6–6.5 mm, minimum length 89 mm (stainless steel, quartz, or borosilicate glass tubes) |
| Tube Compatibility | Tenax-TA, activated carbon, multi-sorbent composite tubes (domestic and imported) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | JH-2 |
| Temperature Control Range | Ambient to 400 °C |
| Gas Flow Rate | 10–1000 mL/min |
| Tube Capacity | 20 positions |
| Temperature Accuracy | ±1 °C |
| Aging Timer | Up to 99 h 59 min 59 s |
| Power Consumption | 500 W |
| Electrical Supply | 220 V, 50 Hz |
| Compatible Tube Dimensions | OD 6–6.5 mm, minimum length 89 mm (stainless steel, quartz, or borosilicate glass) |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JX-1 |
| Instrument Type | Single-Stage Thermal Desorber |
| Automation Level | Manual |
| Desorption Temperature Range | Ambient to 400 °C |
| Temperature Control Accuracy | < ±0.5 °C |
| Sample Position Count | 1 |
| Desorption Flow Rate | 16–160 mL/min (adjustable) |
| Desorption Efficiency | ≥85% |
| Trap Tube Dimensions | Ø6 mm, length >120 mm |
| Carrier Gas | High-Purity N₂ (≥99.999%) |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Operating Environment | 10–40 °C, ≤85% RH |
| Dimensions (W×D×H) | 170×200×150 mm |
| Gas Path Material | Passivated 316 Stainless Steel Tubing |
| Sealing Material | PTFE O-rings |
| Flow Control | Precision Rotameter |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Secondary Thermal Desorber |
| Automation Level | Fully Automated |
| Primary Desorption Temperature Range | 40–400 °C |
| Secondary Desorption (Cold Trap) Temperature Range | −35 °C to 450 °C |
| Valve Heating Range | 40–240 °C, Accuracy: ±1 °C |
| Transfer Line Heating Range | 40–240 °C, Accuracy: ±1 °C |
| Cold Trap Cooling Range | −35 °C to Ambient |
| Temperature Control Accuracy | ±1 °C |
| Sample Tray Capacity | Dual 20-position (40 total) |