Chromatographic Detector
Filter
Showing 91–120 of 151 results
| Brand | Shodex |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | RI-201H |
| Instrument Type | Refractive Index Detector (RID) |
| Compatible System | High-Performance Liquid Chromatography (HPLC) |
| Refractive Index Range | 1.00–1.75 |
| Detection Range | 0.25–512 μRIU |
| Drift | ≤0.2 μRIU/h (deionized water, 1 mL/min, purge off) |
| Linearity | ≥600 μRIU |
| Noise | ≤2.5 nRIU (deionized water, 1.5 s response) |
| Response Time Settings | 0.1, 0.25, 0.5, 1, 1.5, 2, 3, 6 s |
| Auto-Zero | Full-range automatic zeroing |
| Offset Adjustment Range | ±10 μRIU |
| Offset Resolution | 50 nRIU |
| Cell Volume | 8 µL |
| Flow Rate Range | 0.2–3.0 mL/min (typical), up to 10 mL/min (water) |
| Max Backpressure | 50 kPa |
| Internal Dead Volume | IN→Cell ≈60 µL |
| Temperature Control | OFF, 30–55 °C (1 °C increments), 77 °C thermal cutoff |
| Interface | USB |
| Wetted Materials | SS316, PTFE, fused silica |
| Power | AC 100–240 V ±10%, 50/60 Hz, 150 VA |
| Dimensions & Weight | 260 × 400 × 150 mm (W×D×H), ~12 kg |
| Brand | Shodex |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | RI-201H |
| Detection Principle | Differential Refractive Index (dRI) |
| Compatible System | High-Performance Liquid Chromatography (HPLC) |
| Detector Type | Refractometer-Based Chromatographic Detector |
| Flow Cell Design | Dual-Chamber |
| Refractive Index Range | 1.00–1.75 |
| Detection Sensitivity Range | 0.25–512 µRIU |
| Baseline Drift | ≤0.2 µRIU/h (deionized water, 1 mL/min, purge off) |
| Linearity | ≥600 µRIU |
| Noise Level | ≤2.5 nRIU (deionized water, 1.5 s response time) |
| Response Time Settings | 0.1, 0.25, 0.5, 1, 1.5, 2, 3, 6 s |
| Auto-Zero Function | Full-range automatic zeroing |
| Offset Adjustment Range | ±10 µRIU |
| Offset Resolution | 50 nRIU |
| Analog Output | DC 0–1 V (2 mV/µRIU or 8 mV/µRIU selectable) |
| Flow Cell Volume | 8 µL |
| Recommended Flow Rate | 0.2–3.0 mL/min |
| Maximum Flow Rate | 10 mL/min (water) |
| Maximum Backpressure | 50 kPa |
| Dead Volume | IN→Cell ≈ 60 µL |
| Recorder Output | 0–10 mV full scale |
| External I/O Signals | READY, LEAK, ERROR (ROM/RAM/Parameter/Home Position/Overheat/Optical Balance/Intensity) |
| Temperature Control | Off, 30–55 °C (1 °C increments), thermal fuse at 77 °C |
| Interface | USB |
| Wetted Materials | ASTM F899 stainless steel 316, PTFE, fused silica quartz |
| Power Supply | AC 100–240 V ±10%, 50/60 Hz, max. 150 VA |
| Dimensions & Weight | 260 × 400 × 150 mm (W×D×H), approx. 12 kg |
| Brand | Shodex |
|---|---|
| Origin | Japan |
| Model | RI-201H |
| Detection Principle | Differential Refractive Index (dRI) |
| Compatible Systems | HPLC & GPC Platforms |
| Detector Type | Universal Bulk Property Detector |
| Temperature Control | Built-in Thermostatic Cell Housing |
| Output Signal | Analog Voltage (0–1 V) & Digital RS-232 Interface |
| Noise Level | ≤ 2.5 × 10⁻⁹ RIU (RMS, 1 sec time constant) |
| Drift | ≤ 2 × 10⁻⁷ RIU/h (at 40 °C, stabilized) |
| Flow Cell Volume | 8 µL |
| Maximum Flow Rate | 10 mL/min |
| Solvent Compatibility | All HPLC-grade solvents except strong halogenated organics (e.g., chloroform, carbon tetrachloride) |
| Compliance | CE Marked, RoHS Compliant, Designed per IEC 61010-1 for Laboratory Equipment Safety |
| Brand | Shodex |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Models | RI-501, RI-502, RI-504 |
| Detection Principle | Differential Refractive Index (dRI) |
| Light Source | Deuterium Lamp |
| Temperature Control | Dual-zone thermostatic control (30–55 °C) |
| Flow Rate Range | 0.2–3.0 mL/min (RI-501/RI-504), 1–50 mL/min (RI-502) |
| Cell Volume | 8 μL (RI-501/RI-502), 2.5 μL (RI-504) |
| Noise Level | ≤2.5 nRIU (RI-501), ≤25 nRIU (RI-502), ≤5 nRIU (RI-504) |
| Drift | ≤0.2 μRIU/h (RI-501/RI-504), ≤2 μRIU/h (RI-502) |
| Response Time | Adjustable from 0.1 to 6 s |
| Output Interface | LAN, Analog (0–1 V, 0–10 mV/FS), Digital I/O (READY/LEAK/ERROR) |
| Wetted Materials | SUS316 Stainless Steel, PTFE, Fused Silica |
| Compliance | CE Marked, RoHS Compliant |
| Brand | SofTA |
|---|---|
| Model | M300s ELSD |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Light Source | Deuterium Lamp |
| Wavelength Range | 200 nm |
| Detection Mode | Dual-Beam |
| Nebulizer Material | PTFE (Teflon) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Light Source Wavelength | 650 nm (Near-Infrared Laser, <5 mW, FCC Eye-Safe) |
| Detection Element | Sealed Large-Area Silicon Photodiode with Built-in High-Gain Amplifier |
| Sensitivity | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height = 3 s) |
| Dynamic Range | 3 decades (normal/low gain), extendable to 4–4.5 decades |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or other inert gas at 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass |
| User Interface | Vacuum Fluorescent Display (VFD), 4 multifunction buttons |
| Signal Output | Fixed 10 mV / 5 V |
| Communication | RS-232 rear-panel interface |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Model | M300s |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength Range | 195–600 nm |
| Detection Method | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Light Source for Scattering Detection | 650 nm Near-Infrared Laser (<5 mW, FCC Eye-Safe) |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Normal/Low Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Maximum Liquid Flow Rate | 5 mL/min |
| Gas Supply | N₂ or other inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Gas Pressure Regulation | Integrated pressure regulator and overpressure protection |
| Auto Shut-off Valve | Delayed closure after operation |
| Wetted Materials | PTFE, stainless steel, alumina, borosilicate glass |
| Signal Output | Fixed 10 mV or 5 V |
| Interface | RS-232 (rear panel) |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300s |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength Range | 195–600 nm |
| Optical Configuration | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared, <5 mW (FCC Class I Eye-Safe) |
| Detector Element | Sealed, High-Gain Silicon Photodiode |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Normal/Low Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Mobile Phase Flow Rate Support | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass |
| User Interface | Vacuum Fluorescent Display (VFD), 4 Multifunction Keys |
| Onboard Method Storage | 10 Methods |
| Signal Output | Fixed (10 mV / 5 V) or Adjustable (0–5 V) |
| Communication | RS-232 (Rear Panel) |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300s |
| Compatible Instrument | HPLC Systems |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength Range | 200 nm (UV-Vis spectral cutoff, not tunable source) |
| Detection Mode | Dual-Beam |
| Light Source | Deuterium Lamp (for baseline stability reference), 650 nm Near-Infrared Laser (primary scattering source) |
| Nebulizer | PTFE (Teflon®) Capillary |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Sensitivity | 100 pg glucopyranoside (micro-HPLC, 2 µL direct injection, 3 s peak width at 10% height) |
| Dynamic Range | 3 decades (standard gain), up to 4.5 decades (extended range mode) |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas, 50 psi supply pressure |
| Gas Consumption | ≤2.5 L/min |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300S |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength Range | 195 nm (UV-Vis Deuterium Lamp for Optional UV Monitoring) |
| Detection Mode | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared Diode (<5 mW, FCC Class I Eye-Safe) |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Normal/Low Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | Nitrogen or inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Liquid Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass |
| Interface | RS-232 |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | M300S |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength | 195 nm (Deuterium Lamp, Dual-Beam Configuration) |
| Nebulizer | PTFE-Coated Stainless Steel |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Control | 10–70 °C |
| Light Source | Near-Infrared Laser (650 nm, <5 mW, FCC Class I Eye-Safe) |
| Detector | Sealed High-Gain Silicon Photodiode |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC, 2 µL direct injection) |
| Peak Width (10% height) | 3 s |
| Dynamic Range (Standard Gain) | 3 decades |
| Extended Dynamic Range | 4–4.5 decades |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas, 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Liquid Path Materials | PTFE, 316 Stainless Steel, Alumina, Borosilicate Glass (Optics) |
| User Interface | Vacuum Fluorescent Display (VFD), 4 Multifunction Keys |
| Onboard Method Storage | 10 Protocols |
| Signal Output | Fixed (10 mV / 5 V) or Adjustable (0–5 V) |
| Communication | RS-232 (Rear Panel) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Model | M300s |
| Detector Type | Evaporative Light Scattering Detector (ELSD) |
| Wavelength Range | 195 nm (Deuterium Lamp) |
| Detection Principle | Dual-Beam Light Scattering |
| Light Source | Deuterium Lamp |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulizer Zone Temperature Range | 10–70 °C |
| Nebulizer Material | PTFE (Teflon®) |
| Minimum Detectable Mass | 100 pg (Glucopyranoside, Micro-HPLC) |
| Peak Width (10% height) | 3 s (2 µL direct injection) |
| Dynamic Range | 3 orders of magnitude (normal/low gain) |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Requirement | N₂ or inert gas at 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Interface | RS-232 |
| Power | 120/240 V, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Model 100 |
| Detection Principle | Evaporative Light Scattering Detection (ELSD) |
| Compatible System | HPLC / UHPLC |
| Light Source | 670 nm Laser (<5 mW) |
| Nebulizer Gas | N₂ or inert gas (50 psi, ~2.5 SLPM) |
| Operating Temperature | 55 °C (evaporator), ambient to 85 °C (environment) |
| Flow Rate Range | 0–5 mL/min |
| Detector Response | Mass-sensitive, gradient-compatible |
| Detection Limit | 10 ng (on-column, typical) |
| Dynamic Range | >4 orders of magnitude |
| Precision | <2% RSD |
| Output Signal | 0–5 VDC analog |
| Interface | RS-232 |
| Power Requirement | 120/240 VAC, 50/60 Hz, 600 W |
| Dimensions | 9.8" W × 18" D × 11.5" H |
| Weight | 23 lbs |
| Construction Materials | Stainless steel fluid path, Teflon™ tubing, fused silica optical windows |
| Environmental Rating | Indoor use only |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | 300s ELSD |
| Detection Principle | Evaporative Light Scattering Detection (ELSD) |
| Wavelength Range | 200 nm (UV cutoff, not emission wavelength) |
| Optical Configuration | Dual-beam |
| Light Source | Deuterium Lamp (for baseline stability reference), NIR Laser (650 nm, <5 mW) as primary scattering source |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Sensitivity | 100 pg glucopyranoside (micro-HPLC, 2 µL direct injection, peak width at 10% height = 3 s) |
| Dynamic Range | 3 orders of magnitude (standard gain), extendable to 4–4.5 orders with gain optimization |
| Flow Rate Compatibility | Up to 5 mL/min (HPLC & preparative LC) |
| Gas Requirement | N₂ or inert gas, 50 psi supply, ≤2.5 L/min consumption |
| Integrated Pressure Regulation | Yes, with automatic shutoff delay and overpressure protection |
| Signal Output | Fixed 10 mV or 5 V |
| Interface | RS-232 (rear panel), digital status I/O (zero control, valve control, error reporting) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Model 300s |
| Detection Principle | Evaporative Light Scattering Detection (ELSD) |
| Wavelength Range | 195–600 nm |
| Optical Configuration | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared Diode (<5 mW, FCC Class I Eye-Safe) |
| Detector | Sealed Large-Area Silicon Photodiode with Integrated High-Gain Amplifier |
| Minimum Detectable Mass | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height: 3 s) |
| Dynamic Range | 3 decades (standard gain), up to 4.5 decades with extended range mode |
| Mobile Phase Flow Rate Compatibility | Up to 5 mL/min |
| Gas Supply | N₂ or other inert gas, 50 psi inlet pressure |
| Gas Consumption | ≤2.5 L/min |
| Liquid Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass (optical lens) |
| User Interface | Vacuum Fluorescent Display (VFD), 4 multifunction buttons |
| Data Output | Fixed 10 mV / 5 V analog |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Evaporative Light Scattering Detector (ELSD) |
| Compatible System | HPLC (Analytical & Preparative) |
| Wavelength Range | 195–600 nm |
| Detection Mode | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Laser Source | 650 nm Near-Infrared Diode (<5 mW, FCC Class I Eye-Safe) |
| Detector Element | Sealed Large-Area Silicon Photodiode with Integrated High-Gain Amplifier |
| Minimum Detectable Mass | 100 pg Glucopyranoside (Micro-HPLC, 2 µL Direct Injection, 3 s Peak Width at 10% Height) |
| Dynamic Range | 3 orders of magnitude (Normal/Low Gain), Extended to 4–4.5 orders with gain optimization |
| Mobile Phase Flow Rate | Up to 5 mL/min |
| Gas Supply | Nitrogen or inert gas, 50 psi inlet pressure |
| Gas Consumption | ≤2.5 L/min |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Optical Glass |
| User Interface | Vacuum Fluorescent Display (VFD) with 4 Multifunction Keys |
| Onboard Method Storage | 10 Methods |
| Signal Output | Fixed 10 mV or 5 V |
| Digital Interface | RS-232 (Rear Panel) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions | 25 W × 45 D × 29 H cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | 300s |
| Detection Principle | Evaporative Light Scattering (ELSD) |
| Wavelength | 650 nm (Near-Infrared Laser) |
| Beam Configuration | Dual-Beam |
| Light Source | 650 nm NIR Laser (<5 mW, FCC Eye-Safe Compliant) |
| Nebulizer | PTFE-Coated Stainless Steel Capillary |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Sensitivity | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height = 3 s) |
| Dynamic Range | 3 decades (normal/low gain), extendable to 4–4.5 decades with signal processing |
| Flow Rate Compatibility | Up to 5 mL/min (HPLC & preparative LC) |
| Gas Requirement | N₂ or other inert gas, 50 psi inlet pressure |
| Gas Consumption | ≤2.5 L/min |
| Integrated Pressure Regulation | Yes, with automatic shutoff delay and overpressure protection |
| Fluidic Path Materials | PTFE, 316 stainless steel, alumina, borosilicate glass (optical lens) |
| User Interface | Vacuum Fluorescent Display (VFD), 4 multifunction buttons |
| Onboard Method Storage | 10 user-defined methods |
| Signal Output | Fixed 10 mV or 5 V |
| Digital Interface | RS-232 (rear panel) |
| Power | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SofTA |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Model 300S |
| Detection Principle | Evaporative Light Scattering |
| Compatible Systems | HPLC (Analytical & Preparative) |
| Wavelength Range | 195–600 nm |
| Optical Configuration | Dual-Beam |
| Light Source | Deuterium Lamp |
| Nebulizer Material | PTFE (Teflon®) |
| Drift Tube Temperature Range | Ambient to 120 °C |
| Nebulization Zone Temperature Range | 10–70 °C |
| Light Source for Detection | 650 nm Near-Infrared Laser (<5 mW, FCC Class I Eye-Safe) |
| Detector Element | Sealed, Large-Area Silicon Photodiode with Integrated High-Gain Amplifier |
| Minimum Detectable Mass | 100 pg Glucopyranoside (Micro-HPLC, 2 µL direct injection, peak width at 10% height: 3 s) |
| Dynamic Range (Normal Gain) | 3 decades |
| Dynamic Range (Extended Mode) | 4–4.5 decades |
| Mobile Phase Flow Rate Compatibility | Up to 5 mL/min |
| Carrier Gas | Nitrogen or other inert gas |
| Gas Pressure Requirement | 50 psi |
| Gas Consumption | ≤2.5 L/min |
| Integrated Gas Pressure Regulation | Yes (Built-in Regulator & Overpressure Protection) |
| Auto Shut-off Valve | Yes (Timed Delay Cutoff) |
| Fluidic Path Materials | PTFE, Stainless Steel, Alumina, Borosilicate Glass (Optical Lens) |
| User Interface | Vacuum Fluorescent Display (VFD) + 4 Multifunction Keys |
| Onboard Method Storage | 10 Methods |
| Signal Output Options | Fixed 10 mV / 5 V |
| Communication Interface | RS-232 (Rear Panel) |
| Power Supply | 120/240 V AC, 50/60 Hz, 600 W |
| Dimensions (W×D×H) | 25 × 45 × 29 cm |
| Weight | 15 kg |
| Brand | SUNNY HENGPING INSTRUMENT |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | RI-500 Series |
| Detector Type | Refractive Index Detector (RID) |
| Compatible Systems | HPLC |
| Flow Cell Volume | 2.5–8 µL |
| Linear Range | 600–6000 µRIU |
| Noise | 2.5–5 nRIU (H₂O, 1.5 s response) |
| Drift | 0.2–2 µRIU/h |
| Response Time | 0.1–6 s (adjustable) |
| Temperature Control | 30–55 °C (dual-zone) |
| Max Backpressure | 50 kPa |
| Interface | LAN |
| Power | AC 100–240 V ±10%, 50/60 Hz, 150 VA |
| Dimensions | 260 W × 420 D × 165 H mm |
| Weight | 12.5 kg |
| Brand | Sykam |
|---|---|
| Origin | Germany |
| Model | S-3115 |
| Detection Principle | Bipolar Pulsed Electrode Conductivity Measurement |
| Measuring Range | 0.05–10,000 µS |
| Rise Time | 0–10 s |
| Cell Volume | 0.2 µL |
| Temperature Control Range | Ambient to 85 °C |
| Temperature Stability | ±0.01 °C |
| Signal Offset Adjustment | 0–20% of full scale |
| Digital Signal Smoothing | Enabled |
| Auto-zero Function | Supported |
| External Control Interface | Analog (0–10 V) and RS232 |
| Dimensions | 330 × 220 × 160 mm |
| Weight | ~8 kg |
| Brand | Sykam |
|---|---|
| Origin | Germany |
| Model | S-3210, S-3210S, S-3210DAD, S-3240, S-3240DAD |
| Wavelength Range | 190–720 nm |
| Spectral Bandwidth | 6 nm (2 nm per diode) |
| Noise | ±1.5 × 10⁻⁵ AU |
| Drift | 5 × 10⁻⁵ AU/h |
| Wavelength Accuracy | ±0.5 nm |
| Absorbance Range | 0.0005–2.0 AU (full scale, 8 selectable ranges) |
| Flow Cell | PEEK, 10 mm path length, 12 µL volume |
| Scan Speed | 0.1 s for full 190–720 nm spectrum |
| Analog Outputs | 4 channels (0–1.0 V, full-scale matched to absorbance range) |
| Interface | RS232 |
| Detector Type | Diode Array Detector (DAD) or Programmable Single-Channel UV-Vis |
| Brand | Sykam |
|---|---|
| Origin | Germany |
| Model | S-3580 |
| Refractive Index Range | 1.00–1.75 RIU |
| Flow Rate Range | 0.2–3.0 mL/min (analytical/micro), 1.0–50 mL/min (semi-preparative) |
| Linear Range | 0–500, 0–1,000, or 0–20,000 µRIU |
| Noise Level | 5×10⁻⁹ to 10×10⁻⁸ RIU |
| Drift | <1 mV/h (at 1.0 mL/min, H₂O) |
| Cell Volume | 4 µL, 7 µL, or 9 µL |
| Cell Angle | 45° or 5° |
| Maximum Pressure Rating | 6 kg/cm² |
| Dead Volume | 6 µL, 24 µL, or 88/353 µL |
| Temperature Control | Ambient, 35–55 °C (1 °C increments) |
| Response Time Options | 0 s (real-time), 0.4 s, 0.8 s, 1.2 s |
| Output | ±1 V analog |
| Interface Frequency | 1 Hz or 10 Hz |
| Housing Dimensions | 220 × 350 × 155 mm |
| Weight | ~11 kg |
| Brand | Thermo Fisher |
|---|---|
| Origin | Italy |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | FPD Detector |
| Instrument Type | Flame Photometric Detector |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | CAD |
| Instrument Type | Universal Chromatographic Detector |
| Compliance | Designed for GLP/GMP environments |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | Corona Veo |
| Instrument Type | Universal Chromatographic Detector |
| Flow Rate Range | 0.01–2.0 mL/min |
| Detection Principle | Charged Aerosol Detection (CAD) |
| Sensitivity | Sub-nanogram |
| Linear Dynamic Range | >4 orders of magnitude |
| Compatibility | HPLC, UHPLC, microLC, capillary LC |
| Software Drivers | Chromeleon CDS, ChemStation, EZChrom, OpenLab, Empower 2/3 |
| Regulatory Compliance | Supports 21 CFR Part 11 audit trails, GLP/GMP-compliant data integrity workflows |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | UltiMate® 3000 ECD-3000RS |
| Detection Principle | Amperometric & Coulometric Electrochemical Detection |
| Instrument Type | Electrochemical Detector (ECD) |
| Brand | Thermo Fisher |
|---|---|
| Origin | Italy |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | Instant Connect ECD |
| Instrument Type | Electron Capture Detector |
| Price Range | USD 2,700 – 6,800 (FOB Italy) |
| Brand | Thermo Fisher |
|---|---|
| Origin | Italy |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | NPD Detector |
| Instrument Category | Element-Selective Chromatographic Detector |
| Compatibility | Designed for Thermo Scientific TRACE 1300/1310 GC and ISQ EC/LSQ MS platforms |
| Brand | Thermo Fisher |
|---|---|
| Origin | Italy |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | Instant Connect TCD |
| Instrument Type | Thermal Conductivity Detector |
| Compatible Columns | 1/8″ and 1/16″ packed columns |
| Maximum Operating Temperature | 400 °C (0.1 °C increment) |
| Method Detection Limit (MDL) | < 400 pg tridecane/mL with He carrier gas |
| MDL | < 20 pg tridecane/s at 3 mL/min total flow through cell |
| Linear Dynamic Range | 10⁵ |
| Brand | Thermo Fisher |
|---|---|
| Origin | Italy |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | PDD Detector |
| Instrument Type | Universal Selective Detector for GC |
| Operating Temperature Range | Up to 400 °C |
| Linear Dynamic Range | 10⁵ |
| Method Detection Limit (MDL) | Low-picogram level |
| Brand | Thermo Fisher |
|---|---|
| Origin | Italy |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | Instant Connect FID |
| Instrument Type | Flame Ionization Detector (FID) |
| Detection Limit (MDL) | <1.4 pg C/s |
| Sensitivity | >0.03 C/gC |
| Linear Dynamic Range | >10⁷ (±10%) |
| Maximum Operating Temperature | 450°C (0.1°C increment) |
| Carrier Gas Flow Control | N₂ or He, 0–50 mL/min (0.1 mL/min increment) |
| Hydrogen Flow Control | 0–100 mL/min (0.1 mL/min increment) |
| Air Flow Control (IEC) | 0–500 mL/min (0.1 mL/min increment) |
| Column Compatibility | 1/8″ and 1/16″ packed columns |
| Flame Monitoring | Auto-ignition and flame-out detection |