Common Laboratory Equipment
Filter
Showing 4441–4470 of 4598 results
| Brand | XUEKE |
|---|---|
| Origin | Jiangsu, China |
| Model | IMS-20 |
| Ice Production Capacity | 20 kg/24 h |
| Ice Storage Capacity | 10 kg |
| Water Consumption | ≤0.8 L/h |
| Cooling Method | Air-cooled |
| Power Rating | 180 W |
| Dimensions (W×D×H) | 300 × 493 × 547 mm |
| Net Weight | 32 kg |
| Construction | Full Stainless Steel Enclosure |
| Compressor Type | High-Efficiency R290 Refrigerant-Compatible Hermetic Compressor |
| Control System | Microprocessor-Based Fully Automatic Controller |
| Ice Form | Irregular, Fine Flake Ice (Typical Particle Size: 1–3 mm Thickness, <5 mm Diameter) |
| Safety & Monitoring | Full Diagnostic Display (Ice Full, Low Water, Fault Code Indication) |
| Brand | XUEKE |
|---|---|
| Origin | Jiangsu, China |
| Model | IMS-40 |
| Ice Production Capacity | 40 kg/24 h |
| Ice Storage Capacity | 15 kg |
| Water Consumption | 1.6 L/h |
| Cooling Method | Air-cooled |
| Power Consumption | 280 W |
| Dimensions (W×D×H) | 380 × 543 × 722 mm |
| Net Weight | 40 kg |
| Enclosure Material | Stainless Steel (304) |
| Compressor Type | High-efficiency R290 hydrocarbon refrigerant compressor |
| Control System | Microprocessor-based fully automatic control |
| Ice Form | Irregular flake ice (average particle size: 1–3 mm thickness, 5–15 mm diameter) |
| Safety & Monitoring Features | Full diagnostic display for ice-full, low-water, and system fault conditions |
| Compliance | CE-marked per EN 61000-6-3 (EMC) and EN 60335-1 (Safety), compliant with ISO 13485-aligned manufacturing practices for medical/lab support equipment |
| Brand | XUEKE |
|---|---|
| Origin | Jiangsu, China |
| Model | IMS-50 |
| Ice Production Capacity | 50 kg/24 h |
| Ice Storage Capacity | 15 kg |
| Water Consumption | ≤2.0 L/h |
| Cooling Method | Air-Cooled |
| Power Consumption | 280 W |
| Dimensions (W×D×H) | 380 × 543 × 722 mm |
| Net Weight | 40 kg |
| Ice Type | Irregular, fine flake ice |
| Control System | Microprocessor-based fully automatic control |
| Refrigerant | Eco-friendly non-CFC refrigerant |
| Brand | XUEKE |
|---|---|
| Origin | Jiangsu, China |
| Model | IMS-70 |
| Ice Production Capacity | 70 kg/24 h |
| Storage Capacity | 25 kg |
| Water Consumption | ≤2.0 L/h |
| Cooling Method | Air-cooled |
| Power Consumption | 420 W |
| Dimensions (W×D×H) | 548 × 611 × 883 mm |
| Net Weight | 57 kg |
| Ice Type | Irregular flake ice (fine granular, high surface-area-to-volume ratio) |
| Compressor | High-efficiency R290 or R600a refrigerant-compatible hermetic compressor |
| Control System | Microprocessor-based digital controller with LED interface |
| Brand | XUEKE |
|---|---|
| Origin | Jiangsu, China |
| Model | IMS-85 |
| Ice Production Capacity | 85 kg/24 h |
| Ice Storage Capacity | 25 kg |
| Water Consumption | ≤3.5 L/h |
| Cooling Method | Air-Cooled |
| Power Rating | 420 W |
| Dimensions (W×D×H) | 548 × 611 × 883 mm |
| Net Weight | 58 kg |
| Ice Type | Irregular, fine flake ice |
| Compressor | High-efficiency R290 or R600a refrigerant-compatible (non-CFC/HFC) compressor |
| Control System | Fully automatic microprocessor-based control |
| Brand | Yacheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-015 |
| Maximum Feed Rate | 1500 mL/h |
| Particle Size Range | 1–25 µm |
| Inlet Air Temperature Range | Up to 250 °C |
| Drying Residence Time | 1.0–1.5 s |
| Temperature Control Accuracy | ±1 °C (PID-controlled) |
| Noise Level | <60 dB(A) |
| Standard Nozzle Orifice | 1.0 mm (optional: 0.5/0.8/1.5/2.0 mm) |
| Construction Material | 316 Stainless Steel + Borosilicate Glass |
| Power Supply | 3.5 kW, 220 V, Single-phase |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YC-1800 |
| Price | Upon Request |
| Max Feed Rate | 1800 mL/h |
| Minimum Sample Volume | 50 mL |
| Drying Inlet Temperature Range | 110–150 °C |
| Temperature Control Accuracy | ±1 °C (PID) |
| Nozzle Orifice Options | 0.5, 0.7, 1.0, 1.5, 2.0 mm |
| Power Supply | 4 kW / 380 V AC |
| Construction | Full 316L Stainless Steel |
| Atomization | Dual-Fluid Pneumatic Nozzle |
| Noise Level | <65 dB(A) |
| Particle Flowability | High (Narrow Normal Size Distribution) |
| Brand | YaCheng / PILOTECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YC-510 |
| Sample Type | Aqueous solutions only |
| Max Feed Rate | 500 mL/h |
| Inlet Air Temperature Range | 50–200 °C (vacuum-enabled low-temp mode: ≤55 °C) |
| Particle Size Distribution | 1–25 µm |
| Vacuum Level | −0.08 MPa |
| Temperature Control Accuracy | ±1 °C (PID-regulated) |
| Nozzle Orifice | Standard 1.0 mm (optional: 0.5/0.8/1.5/2.0 mm) |
| Minimum Sample Volume | 10–20 mL (dependent on solids content) |
| Final Moisture Content | <1% w/w |
| Construction | Full 316L stainless steel |
| Power Rating | 3.5 kW |
| Display | Color LCD touchscreen with Chinese UI (factory-default) |
| Brand | Yalin |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MVM2800 |
| Speed Range | 500–2800 rpm |
| Operating Modes | Continuous / Touch-Start / Adjustable Speed |
| Motion Type | Horizontal Circular Orbit |
| Amplitude | 4 mm |
| Display | LED Digital Speed & Timer Display |
| Timer Range | 1 min – 99 h 59 min |
| Motor | Brushless DC |
| Max Load Capacity | 4.5 kg |
| Dimensions (W×D×H) | 410 × 276 × 432 mm |
| Weight | 20 kg |
| Power Input | 100 W |
| Ambient Temperature | 5–40 °C |
| Relative Humidity | ≤80% |
| IP Rating | IP21 |
| Sample Capacity | Up to 50 tubes (configurable via interchangeable tube racks VM801–VM806) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Maximum Water Evaporation Rate | 3000 mL/h |
| Atomization Method | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Drying Configuration | Co-Current Downward Spray |
| Inlet Air Temperature Range | 0–300 °C |
| Outlet Air Temperature Monitoring | K-Type Thermocouple |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Chamber & Cyclone Material | Ultra-Hard Borosilicate Glass |
| Feed Pump | Precision Peristaltic Type, 0–70 mL/min Adjustable |
| Hot Air Flow Control | DC Brushless Blower, 0.3–1.0 m³/min |
| Heating System | Dual Stainless Steel Heaters, 2.0 kW × 2 |
| Nozzle Maintenance | Automated Pulse Cleaning (Probe Tapping + Purge Air) |
| Safety Features | Independent Over-Temperature Cut-Off, Leakage Current Protection, Feed Pump Reverse Rotation Detection, Electrostatic Discharge Brush, Integrated Safety Enclosure |
| Power Supply | AC 220 V, 50/60 Hz, 24 A |
| Dimensions (W×D×H) | 1060 × 880 × 1770 mm |
| Weight | ~180 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GB210-A |
| Input Voltage Range | AC 200–240 V (50/60 Hz) |
| Inlet Air Temperature Range | 40–220 °C (±1 °C PID control) |
| Outlet Air Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Feed Pump Flow Rate | 0–26 mL/min |
| Power Consumption | 2.0–2.88 kW |
| Dimensions (W×D×H) | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | RE301 |
| Capacity | 1 L |
| Rotation Speed | 20–250 rpm |
| Lift Stroke | 130 mm |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (with Glass Assembly A) | 828 × 400 × 586 mm (H716 mm with lift raised) |
| Weight | 14.4 kg (main unit only, excluding glassware and bath) |
| Motor Type | Brushless DC (rotation), DC (lift) |
| Control | Potentiometer-based digital speed setting and display |
| Safety Features | Mechanical lower limit stop, motor overload protection |
| Lift Function | Motorized lift with power-failure auto-retract |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | RE601 |
| Capacity | 1 L |
| Rotation Speed | 20–250 rpm |
| Vertical Travel | 130 mm |
| Vacuum Set Range | 0–981 hPa |
| Vacuum Measurement Range | 0–1033 hPa |
| Vacuum Resolution | 1 hPa |
| Hysteresis Setting | 1–50 hPa |
| Vapor Temperature Display Resolution | 0.1 °C or 1 °C (selectable) |
| Power Supply | AC 100–240 V, 50/60 Hz, 1.5 A (unit only) |
| Dimensions (w/d/h) | 828 × 400 × 727 mm (with Glass Assembly A) |
| Weight | ~15 kg (excluding glassware and bath) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | RE801 |
| Capacity | 1 L |
| Rotation Speed | 20–250 rpm |
| Vertical Travel | 130 mm |
| Vacuum Set Range | 0–981 hPa |
| Vacuum Measurement Range | 0–1033 hPa |
| Vacuum Resolution | 1 hPa |
| Hysteresis Setting | 1–50 hPa |
| Vapor Temperature Display Resolution | 0.1 °C or 1 °C (selectable) |
| Power Supply | AC 100–240 V, 50/60 Hz, 1.5 A (unit only) |
| Dimensions (with Glass Assembly A) | 828 × 400 × 727 mm (H: 857 mm with lift raised) |
| Weight | ~15 kg (excluding glassware and bath) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SI411C |
| Heating Method | Natural Convection |
| Temperature Range | Ambient +5°C to 260°C |
| Temperature Control Accuracy | ±2°C (at 260°C) |
| Temperature Uniformity | ±20°C (at 260°C) |
| Heating Power | 1.2 kW |
| Internal Dimensions (W×D×H) | 450 × 430 × 400 mm |
| Chamber Volume | 77 L |
| Shelf Load Capacity | 15 kg per shelf |
| Number of Adjustable Shelves | 10 |
| Shelf Spacing | 30 mm |
| Power Supply | AC 220 V, 6 A, 50/60 Hz |
| Net Weight | ~42 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SI611C |
| Convection Type | Natural Convection |
| Temperature Range | Ambient +5°C to 260°C |
| Temperature Control Accuracy | ±2°C (at 260°C) |
| Internal Dimensions (W×D×H) | 600 × 530 × 500 mm |
| Chamber Volume | 159 L |
| Shelf Load Capacity | 15 kg per shelf |
| Number of Shelves | 13 (adjustable at 30 mm intervals) |
| Power Supply | AC 220 V, 6.5 A, 50/60 Hz |
| Heating Power | 1.36 kW |
| Safety Features | Dual independent over-temperature protection (PID controller + mechanical overheat limiter), self-diagnostic circuitry (sensor fault, heater open-circuit, SSR short-circuit), earth leakage circuit breaker, key lock function |
| Controller | 4-digit LED display (green for actual temperature, red for setpoint), 3-segment PID control, programmable timer (1 min–99 h 59 min |
| extended mode | 100–999 h 50 min with standby), 30-step program memory (configurable as 30×1, 15×2, or 10×3 segments) |
| Compliance | Designed and manufactured in accordance with JIS B 8701 (Japanese Industrial Standard for Dry Heat Sterilizers), compatible with ISO 17665-1 and ASTM F1055 requirements for thermal validation of dry heat sterilization processes |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SL-21 |
| Operating Temperature Range | 800–850 °C |
| Temperature Attainment Time | ≤10 min |
| Heating Power | 130 W |
| Internal Chamber Dimensions (W×D×H) | 95 × 170 × 200 mm |
| Aperture Diameter | 15 mm |
| Power Supply | AC 100 V, 1.5 A |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SN310C |
| Type | Vertical Sterilizer |
| Max Temperature | 135 °C |
| Max Pressure | 0.255 MPa |
| Operating Temperature Range | 45–135 °C (with programmable sub-ranges: 45–80 °C preheat, 45–60 °C keep-warm, 65–100 °C dissolution, 105–135 °C sterilization) |
| Heating Power | 2 × 800 W (100 V) |
| Cooling | Integrated axial-flow fan |
| Safety | Triple mechanical pressure-lid interlock system |
| Voltage Options | AC 100–120 V or AC 200–240 V |
| Ambient Operating Temperature | 5–35 °C |
| Control System | Microprocessor-based PID temperature control with digital keypad interface and real-time display |
| Interface Ports | 1/4″ sample sensor port, 1/4″ chart recorder port, pressure gauge port with solenoid valve branch |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SQ510C |
| Instrument Type | Vertical Sterilizer |
| Max Temperature | 135 °C |
| Max Pressure | 0.255 MPa |
| Chamber Dimensions | Ø370 × 465 mm (H) |
| External Dimensions | 520 × 660 × 901 mm (W × D × H) |
| Chamber Volume | 50 L |
| Heating Power | 2 × 1000 W |
| Cooling | Integrated Axial Fan |
| Operating Ambient Temperature | 5–35 °C |
| Power Supply Options | AC 100–120 V (20.5–24.5 A) or AC 200–240 V (10.5–12.5 A) |
| Safety | Triple Interlocked Lid Lock System |
| Control | Microprocessor-based PID with Digital Keypad Interface |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SQ810C |
| Instrument Type | Vertical |
| Max Temperature | 135 °C |
| Max Pressure | 0.255 MPa |
| Chamber Dimensions | Ø370 × 744 mm |
| External Dimensions | 520 × 660 × 1125 mm |
| Chamber Volume | 80 L |
| Heating Power | 4000 W |
| Operating Ambient Temperature | 5–35 °C |
| Standard Cooling Fan | Yes |
| Safety Locks | Triple Interlocked Lid Mechanism |
| Voltage Options | AC 100–120 V (20.5–24.5 A) / AC 200–240 V (10.5–12.5 A) |
| Temperature Control | Microprocessor-based PID with Digital Keypad Interface |
| Programmable Stages | Preheating (45–80 °C), Holding (45–60 °C), Dissolution (65–100 °C), Sterilization (105–135 °C) |
| Brand | YAN ZHENG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DV-500/10MPa |
| Reaction Pressure | 10 MPa |
| Reaction Temperature | 500 °C |
| Catalyst Bed Volume | 5 mL |
| Brand | YAN ZHENG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Electrochemical Corrosion Reactor |
| Volume Range | 50–500 mL |
| Vessel Material | ASTM A240 316L Stainless Steel (custom options: Hastelloy C-276, Inconel 625, Titanium Grade 2, Zirconium 702, Monel 400) |
| Maximum Design Pressure | 150 bar |
| Maximum Operating Pressure | 100 bar |
| Vacuum Capability | –1 to 0 bar (gauge), with optional vacuum gauge |
| Maximum Design Temperature | 250 °C |
| Typical Operating Temperature Range | 50–200 °C (electrochemical mode: ≤80 °C) |
| Temperature Control Accuracy | ±1 °C (under non-exothermic/endothermic transient conditions) |
| Heating Power | 500–1500 W (volume-dependent) |
| Agitation System | Magnetic coupling drive |
| Stirring Speed Range | 150–1500 rpm (standard impeller: three-blade propeller) |
| Motor Power | 80 W |
| Control Interface | 7-inch capacitive touchscreen HMI |
| Brand | YAN ZHENG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SCF-100/300 Series |
| Vessel Volume | 100–500 mL |
| Construction Material | ASTM A240 316L Stainless Steel (custom options: Hastelloy C-276, Inconel 625, TA2 Titanium, Zirconium) |
| Design Pressure | 150 bar |
| Maximum Operating Pressure | ≤100 bar |
| Burst Pressure | 125 bar |
| Vacuum Capability | –1 MPa (gauge) |
| Design Temperature | 300 °C |
| Operating Temperature Range | 80–250 °C (ultrasonic-assisted mode: 60–70 °C) |
| Temperature Control Accuracy | ±1 °C (under non-extreme exo/endothermic conditions) |
| Heating Method | Electric Cartridge Heating |
| Heating Power | 500–1500 W (volume-dependent) |
| Stirring Mechanism | Magnetic Stirring |
| Stirring Speed | 150–1500 rpm |
| Ultrasonic Module | 450 W output, 20/25 kHz frequency, TA2 titanium alloy probe |
| Sealing | Dual-V-groove Linear Metal-to-Metal Seal with Bolted Flange |
| Control System | YZ-MRCTR Integrated Digital Controller with PID Algorithm |
| Compliance | ASME BPVC Section VIII Div. 1 (design basis), ISO 15148:2021 (supercritical process equipment), EN 13445-3 (unfired pressure vessels) |
| Brand | YAN ZHENG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | YZUBPR-G2-L1 226103 |
| Reaction Pressure | 200 bar |
| Reaction Temperature | 250 °C |
| Brand | YAN ZHENG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YZ82510 |
| Quotation | Upon Request |
| Reactor Volume | 500 mL |
| Feed Volume | 150–350 mL |
| Operating Pressure | 20 MPa |
| Operating Temperature | 500 °C (±1 °C) |
| H₂ Flow Range | 0–3000 mL/min & 0–1000 mL/min |
| Construction Material | ASTM A240 316L stainless steel |
| Control System | Siemens PLC-based hardware + custom SCADA monitoring software |
| Safety Systems | Multi-level interlocked over-temperature, over-pressure, and emergency power cutoff protection |
| Brand | Yanei |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SGrab-R |
| Pricing | Upon Request |
| Brand | Yanei |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | RMST-2 Central Control Platform |
| Pricing | Upon Request |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Q-3 |
| Instrument Type | Metallographic Cutting Machine |
| Max Cutting Cross-Section | Ø50 × 70 mm |
| Motor Power | Not Specified (380 V / 50 Hz) |
| Grinding Wheel Size | Ø250 × 2.0 × Ø4 mm |
| Rotational Speed | 2840 rpm |
| Dimensions (L×W×H) | 600 × 620 × 470 mm |
| Weight | Not Specified |
| Cooling System | Integrated adjustable coolant flow with manual valve and hollow clamping arm |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SYJ-160 |
| Instrument Type | Metallographic Cutting Machine |
| Speed Range | 20–600 rpm (infinitely variable) |
| Power Supply | AC 110 V / 220 V |
| Feed Positioning Accuracy | 0.01 mm (mechanical and digital display) |
| Rotary Adjustment | Horizontal 360°, Vertical ±15° |
| Maximum Travel | 50 mm (fine-adjustment range: 25 mm) |
| Max Blade Diameter | 150 mm (6 in) |
| Auto-Shutdown on Completion | Yes |
| Standard Blade Mounting | Φ12.7 mm arbor |
| Net Weight | 14.5 kg |
| Dimensions (L×W×H) | 400 × 300 × 300 mm |
| Brand | YANRUN |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZMP-2000 |
| Rotational Speed | 50–1500 rpm (intelligent auto-adjustable) |
| Platen Diameter | 230 mm (optional: 200 / 250 / 300 mm) |
| Number of Platens | 2 |
| Pressure Control | Pneumatic (0.5 MPa), center load up to 300 N, individual sample load 1–40 N × 8 |
| Sample Capacity | 8 specimens (standard configuration: six 30 mm + two 40 mm mounting holes) |
| Control System | PLC with 8-inch color touchscreen interface |
| Grinding/Polishing Time Range | 0–9999 s × 2 stages |
| Abrasive Delivery | Dual-channel intelligent spray system (minimum interval: 0.1 s |
| minimum duration | 0.1 s) |
| Motor Power | 550 W × 2 (AC variable-frequency drive) |
| Dimensions (W×D×H) | 870 × 800 × 700 mm |
| Voltage | 220 V / 50 Hz |
| Storage Capacity | Up to 100 programmable grinding-polishing protocols |