Constant Temp/Heating/Drying Equipment
Filter
Showing 121–150 of 3271 results
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-II-UAR-SL |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 7.2 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Method | Resistance Wire |
| Control System | Fuzzy PID + Self-Tuning Regulation, 30-Stage Programmable Logic Controller |
| Safety Features | Over-Temperature & Thermocouple Break Alarms |
| Rotation Mechanism | Geared Motor with Bidirectional Speed Control |
| Atomization System | 60 kHz Digital Ultrasonic Nebulizer with Adjustable Output |
| Insulation Material | Vacuum-Formed Alumina Fiber |
| Thermocouple Type | K-Type |
| Structural Frame | Anodized Aerospace Aluminum with Chrome-Plated Dual Linear Rails |
| Vacuum Flange | Multi-Port Longitudinal Design |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-III-210 |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Total Power Rating | 15 kW (6-point temperature control) |
| Heating Rate to Max Temp | ≤10 °C/min |
| Heating Method | Resistive Wire Heating |
| Control System | 10-inch capacitive touch LCD panel with fuzzy PID algorithm, auto-tuning capability, 30-segment programmable ramp-soak profile, over-temperature and thermocouple break alarms |
| Tube Inner Diameter | Φ210 mm |
| Zone Configuration | Three independently controlled horizontal zones (300 mm + 300 mm + 300 mm) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-III-HP-132 |
| Type | Horizontal Tube Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 14.5 kW |
| Heating Rate (to Max Temp) | ≤5–10 °C/min |
| Heating Method | Resistance Wire Heating |
| Control System | Fuzzy PID + Self-Tuning Regulation |
| Programmable Stages | 30-segment Intelligent Ramp/Soak |
| Safety Features | Over-Temperature & Thermocouple Break Alarms |
| Pressure Range | 0–10 MPa |
| Tube ID Options | 1–20 inch (customizable) |
| Cooling | Forced Air Cooling |
| Display | 15.7-inch Touchscreen HMI |
| Footprint | 2.66 m² |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-IV |
| Maximum Temperature | 1200°C (1 hr) |
| Temperature Control Accuracy | ±1°C |
| Total Power Rating | 7 kW |
| Max Heating Rate to 1200°C | ≤30°C/min |
| Heating Method | Resistive Wire Heating |
| Control System | Fuzzy PID + Auto-Tuning |
| Programmable Profiles | 30-Stage Intelligent Ramp/Soak |
| Safety Features | Over-Temperature & Thermocouple Break Alarms |
| Tube Diameter Options | Φ50 / Φ60 / Φ80 / Φ100 / Φ130 × 1400 mm (L) |
| Configuration | Four Independent Axial Heating Zones |
| Structural Design | Pneumatic Spring-Assisted Hinged Lid with Dual End Supports |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-MS |
| Max Operating Temperature | 1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1.1 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Element | Resistance Wire |
| Control System | Fuzzy PID with Auto-Tuning + 30-Stage Programmable Ramp/Soak Profile |
| Tube Diameter | φ25 mm |
| Standard Configuration | Stainless Steel Vacuum Flange with Valve + Fused Quartz Tube |
| Safety Features | Over-Temperature Protection & Thermocouple Break Alarm |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-PV |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate (to Max Temp) | 50 °C/min |
| Heating Method | Resistance Wire Heating |
| Control System | Fuzzy PID + Auto-Tuning Algorithm |
| Programmable Stages | 30-Step Intelligent Ramp/Soak Profile |
| Pressure Capability | 0–1.5 MPa (0–15 kgf/cm²) |
| Tube Dimensions (OD × L) | 50/60/80/100 mm × 1000 mm (selectable) |
| Tube Material | Specialized Explosion-Resistant Quartz with Reinforced Protective Sleeve |
| Safety Features | Adjustable Pressure Relief Valve on Exhaust Flange, Over-Temperature & Thermocouple Break Alarms |
| Structural Design | Horizontal Split-Type (Top-Opening) Configuration |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BTF-1200C-R |
| Instrument Type | Horizontal Rotating Tube Furnace |
| Max Temperature | 1200°C |
| Continuous Operating Temperature | ≤1100°C |
| Temperature Control Accuracy | ±1°C |
| Max Power | 3 kW |
| Heating Rate (to Max Temp) | ≤10°C/min |
| Heating Method | Resistance Wire (Fe-Cr-Al Alloy) |
| Heating Zone Length | 440 mm |
| Uniform Temperature Zone Length | 200 mm |
| Tube Rotation Speed | 3–13 rpm (adjustable) |
| Tilt Angle Range | 0–40° (adjustable) |
| Tube Dimensions | Dual-Diameter Quartz Tube — Ø60×420 mm (ends), Ø100×360 mm (center), Total Length: 1200 mm |
| Vacuum Level (with Mechanical Pump) | 0.5 Pa |
| Ultimate Vacuum (DRV10 Pump, Cold/Empty) | 5×10⁻¹ Pa |
| Pressure Gauge Range | −0.1 to 0.15 MPa |
| Control System | Fuzzy PID + Self-Tuning, 30-Stage Programmable Controller |
| Safety Features | Over-Temperature Alarm, Thermocouple Break Detection |
| Power Supply | AC 208–240 V, Single Phase, 50/60 Hz |
| Main Drive Motor Power | 0.04 kW |
| Linear Actuator Power | 0.04 kW |
| Overall Dimensions (Furnace Only) | 910×383×510 mm |
| With Tube Assembly | 1300×600×1230 mm |
| Packaging (Wooden Crate) | 1150×530×810 mm |
| Net Weight | 90 kg |
| Gross Weight | 150 kg |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-RTP-180 |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Temperature Measurement Accuracy | ±0.2 °C |
| Temperature Uniformity | ±2 °C |
| Max Heating Rate | 30 °C/s |
| Cooling Rate | 1–300 °C/min (adjustable via furnace opening or tube removal) |
| Internal Chamber Dimensions | Φ180 mm × 580 mm |
| Rated Power | 24 kW |
| Control System | Intelligent Fuzzy Full-Closed-Loop PID with 7" LCD Touchscreen |
| Heating Element | High-Performance Resistance Wire |
| Insulation | High-Density Alumina Fiber Vacuum-Formed Crucible with High-Reflectivity Ultra-High-Temperature Coating |
| Gas Interface | Dual KF25 vacuum port + Φ6 mm dual ferrule gas inlet |
| Cooling Options | Natural convection, forced air, or N₂/compressed air (0.14–0.5 kg/cm²) |
| Electrical Supply | 380–400 V AC, 50–60 Hz, auto-adaptive |
| Weight | ~80 kg |
| Overall Dimensions | 920 mm (L) × 500 mm (W) × 560 mm (H) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-S |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 1.5 kW |
| Heating Rate (to Max Temp) | 10 °C/min |
| Heating Element | Molybdenum-doped Fe-Cr-Al Alloy Resistance Wire |
| Control System | Full-Automatic PID with Self-Tuning, Over-Temperature & Thermocouple Break Alarms |
| Tube Inner Diameter | Φ25 mm (1") |
| Compliance | CE Certified |
| Heating Zone Configuration | 8-zone radial heating assembly |
| Programmable Ramp/Soak | 30-segment heating and cooling profile |
| Vacuum/Gas Atmosphere Capability | Yes |
| Tube Material Compatibility | High-purity quartz (standard), optional alumina or stainless steel |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1200C-SLD |
| Max Temperature | 1200 °C (quartz tube), 1100 °C (alloy steel pressure tube) |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Rate | up to 50 °C/s (during rapid insertion), 30 °C/s (100–1000 °C under standard ramp) |
| Heating Element | Imported Kanthal A1 resistance wire |
| Control System | Fuzzy PID with auto-tuning + 30-segment programmable controller |
| Configuration | Horizontal sliding rail design for rapid thermal cycling |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5 kW |
| Heating Rate | ≤10 °C/min below 1200 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Tube Dimensions | Φ60 mm × 1000 mm or Φ80 mm × 1000 mm |
| Furnace Chamber Material | High-Purity Alumina (Al₂O₃) with US-Imported High-Temperature Alumina Coating |
| Cooling System | Dual-layer shell with forced-air cooling |
| Safety Features | Over-temperature and thermocouple failure alarm |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-A |
| Maximum Temperature | 1400 °C (1 hr rating) |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate | ≤10 °C/min below 1000 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable ramp-soak profile, over-temperature and thermocouple break alarms |
| Tube Inner Diameter | Φ80 mm |
| Sealing Options | Clamp-type or hinged flange |
| Safety Features | Integrated pressure relief valve (setpoint adjustable) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-II |
| Maximum Temperature | 1400 °C |
| Temperature Uniformity | ±1 °C |
| Total Power Rating | 10 kW |
| Heating Rate | ≤10 °C/min up to 1200 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Controller, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1200 mm or Φ80 mm × 1200 mm |
| Furnace Chamber Material | High-Purity Alumina (Al₂O₃) with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Shell with Forced-Air Cooling System |
| Structural Support | Integrated Flange Mounting Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-III |
| Max Temperature | 1400 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 13 kW |
| Heating Rate | ≤10 °C/min up to 1200 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable controller, over-temperature & thermocouple-failure alarm |
| Tube Dimensions | Φ60 mm × 1200 mm or Φ80 mm × 1200 mm |
| Chamber Material | High-purity Al₂O₃ ceramic tube with US-sourced high-temperature alumina coating |
| Cooling | Dual-layer water-cooled outer shell with forced-air interlayer cooling |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1400C-S |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 4 kW |
| Heating Rate | ≤10 °C/min below 1200 °C, ≤5 °C/min from 1200–1300 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Controller, Over-Temperature & Thermocouple Failure Protection |
| Tube Inner Diameter | Φ60 mm |
| Chamber Lining Material | High-Purity Alumina (Al₂O₃) with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Air-Cooled Housing |
| Structural Design | Flanged Support Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1500C |
| Maximum Temperature | 1500 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2.5 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Control System | Fully Automatic PID Controller with Self-Tuning Functionality |
| Thermocouple Type | Type S (Platinum/Rhodium) |
| Over-Temperature & Thermocouple Break Protection | Yes |
| Tube Inner Diameter | Φ50 mm |
| Furnace Tube Material Compatibility | Quartz, Alumina, or Molybdenum (with appropriate vacuum/ambient gas configuration) |
| Insulation | High-Purity Alumina Ceramic Fiber + Dual-Layer Water-Cooled Stainless Steel Shell |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Equipment Type | Horizontal Tube Furnace |
| Maximum Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate | ≤10 °C/min below 1200 °C, ≤5 °C/min from 1200–1500 °C, ≤2 °C/min above 1500 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak Profile, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1000 mm or Φ80 mm × 1000 mm |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Al₂O₃ Coating |
| Cooling | Dual-Layer Air-Cooled Steel Housing |
| Structural Support | Adjustable Flange Mounting Bracket |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1600C-II |
| Maximum Temperature | 1600 °C |
| Temperature Uniformity | ±1 °C |
| Total Power Rating | 11 kW |
| Heating Rate | ≤10 °C/min up to 1200 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable temperature profile, over-temperature and thermocouple failure alarm |
| Tube Dimensions | Φ60 mm × 1200 mm or Φ80 mm × 1200 mm |
| Chamber Lining | High-purity Al₂O₃ ceramic tube with US-sourced high-emissivity alumina coating |
| Cooling | Dual-layer air-cooled shell structure |
| Structural Support | Integrated flange support frame for load distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1700C |
| Maximum Temperature | 1700 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 5.2 kW |
| Heating Rate | ≤10 °C/min below 1200 °C, ≤5 °C/min from 1200–1500 °C, ≤2 °C/min above 1500 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with auto-tuning, 30-segment programmable controller, over-temperature and thermocouple failure alarm |
| Tube Dimensions | Φ60 mm × 1000 mm (ID × effective length) |
| Chamber Lining | High-purity alumina (Al₂O₃) tube with proprietary high-emissivity ceramic coating (imported from USA) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | 1700°C Dual-Zone High-Temperature Tube Furnace |
| Temperature Range | Up to 1700°C |
| Temperature Uniformity | ±1°C (at setpoint, within 100 mm central zone) |
| Maximum Power | 11 kW |
| Heating Rate | ≤10°C/min below 1200°C, ≤5°C/min from 1200–1500°C, ≤2°C/min above 1500°C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak Profile, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1000 mm (ID × Length) |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Aluminum Oxide Coating |
| Cooling | Dual-Layer Air-Cooled Steel Housing |
| Structural Support | Integrated Flange Mounting Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1700C-III |
| Max Temperature | 1700 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 13 kW |
| Heating Rate | ≤10 °C/min (≤1200 °C), ≤5 °C/min (1200–1500 °C), ≤2 °C/min (>1500 °C) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 1000 mm (ID × Length) |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Air-Cooled Shell Structure |
| Structural Support | Integrated Flange Mounting Bracket for Load Distribution |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1700C-S |
| Maximum Temperature | 1700 °C |
| Temperature Uniformity | ±1 °C |
| Rated Power | 4 kW |
| Heating Rate | ≤10 °C/min (≤1200 °C), ≤5 °C/min (1200–1500 °C), ≤2 °C/min (>1500 °C) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Ramp/Soak Profile, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | Φ60 mm × 800 mm (ID × Length) |
| Chamber Lining | High-Purity Al₂O₃ Ceramic Tube with US-Imported High-Temperature Alumina Coating |
| Cooling | Dual-Layer Air-Cooled Steel Housing |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-1750C |
| Maximum Temperature | 1750 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate | ≤10 °C/min up to 1400 °C |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Control System | Fuzzy PID with Auto-Tuning, 30-Stage Programmable Logic Controller, Over-Temperature & Thermocouple Break Protection |
| Tube Dimensions | 100 mm OD × 1300 mm L |
| Insulation | Vacuum-Formed Alumina Fiber Blankets |
| Cooling | Dual-Layer Air-Cooled Housing |
| Structural Support | Dual End Flange Mounting Brackets |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | BTF-900C-SS |
| Maximum Temperature | 900 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 280 W |
| Heating Rate (to Max Temp) | 10 °C/min |
| Heating Method | Resistance Wire Heating |
| Control System | Fuzzy PID + Auto-Tuning |
| Programmable Stages | 30-segment Intelligent Ramp/Soak |
| Safety Features | Over-Temperature & Thermocouple Break Alarms |
| Tube Inner Diameter | Φ25 mm |
| Hot Zone Length | 90 mm |
| Furnace Liner Material | High-Purity Alumina Fiber |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MF-1200C |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1200°C |
| Continuous Service Temperature | 1100°C |
| Temperature Uniformity | ±2°C (within 80×80×80 mm zone at 1100°C) |
| Control Accuracy | ±1°C |
| Max. Heating Rate | 30°C/min |
| Rated Power | 4 kW |
| Internal Chamber Dimensions | 300 × 200 × 120 mm (7.2 L) |
| External Dimensions | 435 × 550 × 540 mm |
| Net Weight | 53 kg |
| Heating Element | Molybdenum-Doped Alloy Resistance Wire |
| Insulation Material | Vacuum-Formed High-Purity Alumina Fiber |
| Cooling System | Dual-Layer Air-Cooled Shell |
| Safety Features | Door-Interlocked Power Cut-off, Dual Mechanical Latches, Over-Temperature & Thermocouple Break Alarms |
| Controller | 30-Stage Programmable PID with Auto-Tuning, RS485 Communication Port (optional LabVIEW integration), Touchscreen Interface (optional upgrade) |
| Certifications | CE Compliant |
| Warranty | 12 months full unit coverage |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MF-1200C-L |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1200°C |
| Operating Temperature Range | ≤1100°C |
| Temperature Control Accuracy | ±1°C |
| Rated Power | 4 kW (Note: 6 kW listed in description refers to peak/derated capacity |
| Heating Rate (to max temp) | 5–20°C/min |
| Heating Element | Kanthal A1 Resistance Wire |
| Chamber Dimensions | 250 × 300 × 250 mm (L×W×H) |
| Nominal Volume | 64 L |
| External Dimensions | 670 × 630 × 1010 mm |
| Net Weight | 143 kg |
| Gross Weight | 172 kg |
| Voltage | AC 208–240 V, Single Phase, 50/60 Hz |
| Thermocouple | Type K |
| Control System | 30-Stage Programmable PID with Auto-Tuning, Over-Temperature & Thermocouple Break Protection |
| Insulation | Multi-Layer Alumina Fiber (Vacuum-Formed), High-Purity Al₂O₃ Liner |
| Cooling | Dual-Wall Air-Cooled Jacket with Integrated Air Channel |
| Safety Certification | CE-compliant |
| Optional Certifications | UL 61010 (TUV or CSA, fee-based) |
| Brand | BEQ |
|---|---|
| Origin | Anhui, China |
| Model | VTF-1200C-S-III-D50 |
| Instrument Type | Vertical Tube Furnace |
| Max Temperature | 1200 °C |
| Continuous Operating Temperature | ≤1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Heating Rate (to max temp) | ≤10 °C/min |
| Heating Element | Resistance Wire |
| Thermocouple Type | K-Type |
| Control Method | Intelligent Fuzzy PID with Auto-Tuning & 30-Stage Programmable Ramp/Soak |
| Total Power | ≤4 kW |
| Heating Zone Length | 240 mm |
| Internal Chamber Dimensions (L×W×H) | 950×800×1200 mm |
| Unit Weight | ~100 kg |
| Insulation Material | Lightweight Alumina Fiber |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | BHY-FIR1118 |
| Pricing | Available Upon Request |
| Operating Voltage | 220 V AC |
| Rated Power | 500 W |
| Chamber Dimensions | 400 × 260 × 220 mm (L × W × H) |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | BD Series Microbiological Incubator |
| Temperature Range | Ambient +5 °C to 100 °C |
| Safety Class | Independent Adjustable Temperature Safety Device, Class 3.1 (DIN 12880) |
| Heating Technology | APT.line™ Preheating Chamber |
| Air Circulation | Free Convection |
| Door | Inner Door Made of Tempered Safety Glass (ESG) |
| Shelving | 2 Chrome-Plated Adjustable Shelves |
| Stackable Configuration | Up to 115 L Total Volume |
| Exhaust Valve | Adjustable with Timer Function |
| Controller | Microprocessor-Based with Time Function |
| Interface | RS 422 Serial Port |
| Internal Volume | 20 L (BD23) / 400 L (BD400) |
| External Dimensions (W×H×D mm) | 435×495×520 (BD23) / 1235×1025×765 (BD400) |
| Internal Dimensions (W×H×D mm) | 222×330×277 (BD23) / 1000×800×500 (BD400) |
| Net Weight | 27 kg (BD23) / 135 kg (BD400) |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model Series | BD, BF, KB |
| Temperature Range (BD) | Ambient +5 °C to 100 °C |
| Temperature Resolution | 0.1 °C |
| Control System | DS Controller with Electronic Timer (0–99 h) |
| Ventilation | Rear 50 mm exhaust duct + front adjustable air damper |
| Safety | Class 3.1 Overtemperature Protection (DIN 12880) |
| Interface | RS422 for APT-COM Data Control Software |
| Interior Door | Tempered Glass |
| Shelf Capacity | 2 chrome-plated adjustable shelves (standard) |
| Sterilization Capability | Dry-heat decontamination at 99 °C |
| Stackable | BD models ≤115 L |
| Compliance | DIN 12880, IEC 61000-6-3, IEC 61000-6-2 |