Constant Temp/Heating/Drying Equipment
Filter
Showing 211–240 of 3271 results
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | 146 Series Standard Mechanical Convection Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Control Accuracy | ±1.0°C |
| Max Power | 24.0 kW |
| Heating Method | Forced-air circulation |
| Internal Dimensions | 508 × 457 × 508 mm to 1219 × 635 × 940 mm |
| Uniformity | Configurable per application requirements (ASTM E145-compliant validation support available) |
| Construction | 304 stainless steel interior, heavy-gauge cold-rolled steel exterior with white porcelain enamel finish |
| Airflow System | Adjustable single-pass ducted airflow with motorized dampers and direct-drive high-volume centrifugal blower |
| Safety | Independent overtemperature limit controller, GFCI circuit breaker, thermal cutoff switch |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BLUE M 7780 |
| Pricing | Available Upon Request |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | CSP Safety Oven |
| Type | Benchtop Forced-Air Safety Oven |
| Max Temperature | 343°C |
| Temperature Uniformity | ±1.5% of setpoint at stability |
| Control Accuracy | ±0.25% of setpoint |
| Heating Method | Horizontal or Vertical Forced-Air Circulation |
| Internal Dimensions | 480 × 381 × 457.2 mm (18.9" × 15" × 18") or 457.2 × 381 × 480 mm (18" × 15" × 18.9") |
| Internal Volume | 85 L (3.0 ft³) per chamber |
| Power Input | 7 kW @ 240 V / 1Φ / 60 Hz |
| Exhaust System | Integrated Volatile Fume Exhaust with TempLimit® Overtemperature Protection |
| Construction | Heavy-gauge cold-rolled steel exterior, 304 stainless steel interior with helical arc-welded seams, silicone rubber gasketed door, open-coil nickel-chromium heating elements, solid-state power relays |
| Compliance | NFPA 86–2023 Compliant for Class A Solvent-Handling Applications |
| Safety Features | Explosion-relief panel (rear wall), grounded metal enclosure cage, manual-reset high-limit controller, J-type thermocouple sensor, panel-mounted status indicators |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | CW-5580 / CW-6680 / CW-7780 / CW-8880 / CW-9980 |
| Max Temperature | 704°C |
| Temperature Uniformity | ±2% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced-air convection |
| Internal Dimensions | 356×356×356 mm to 1219×610×914 mm |
| Power Rating | Up to 30.0 kW |
| Insulation | 152 mm (6 in) mineral wool |
| Airflow | Adjustable single-pass and recirculating modes |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | CW-6680 |
| Temperature Range | Ambient to 700 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions | 40×34×57 to 68×40×82 cm (W×D×H) |
| Internal Chamber Dimensions | 20×18×20 to 48×24×36 cm (W×D×H) |
| Chamber Material | 304 Stainless Steel |
| Heating Method | Horizontal Forced-Air Circulation |
| Compliance | Designed for ASTM E145 Class I & II, ISO 17025-compliant thermal validation workflows, GLP/GMP-ready architecture |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | CW-Series |
| Max Temperature | 704°C |
| Temperature Uniformity | ±2% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced-air convection with multi-blade centrifugal fan |
| Internal Dimensions | 356×356×356 mm to 1219×610×914 mm |
| Power Rating | Up to 30.0 kW (480 VAC, 3-Phase) |
| Insulation | 152 mm (6") mineral wool |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Forced-Air Circulating Oven (Box-Type) |
| Max Temperature | 398°C (750°F) |
| Temperature Uniformity | ±2% of setpoint (in empty, stabilized chamber) |
| Max Power | 48 kW |
| Heating Method | Horizontal, single-pass forced-air circulation with centrifugal blower |
| Internal Dimensions | 60.7 × 60.7 × 121.9 cm to 121.9 × 121.9 × 182.9 cm |
| Construction | 14–16 gauge cold-rolled steel exterior, 304 stainless steel interior, 10.2 cm (4") fiberglass insulation |
| Compliance | NEC-compliant wiring, redundant overtemperature protection, UL-listed components |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Mechanical Convection Drying Oven |
| Temperature Range | Ambient +15°C to 250°C (482°F) |
| Temperature Uniformity | ±1% of setpoint |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Chamber Material | 304 Stainless Steel |
| Insulation | 102 mm (4 in) Fiberglass |
| Exterior Construction | Heavy-gauge 16 GA (1.5 mm) Steel |
| Door Seal | Blue M Silicone Gasket |
| Airflow System | Horizontal, Adjustable Single-Pass or Recirculating Mechanical Convection |
| Exhaust | Dual-port, High-Capacity Centrifugal Blower with Dynamic Balancing |
| Optional Access Port | 76 mm (3 in) Diameter, Center-Right Wall |
| Heating Element | Blue M Eterna™ Nickel-Chromium Wire with Alumina Ceramic Insulation |
| Power Configuration | Three-Phase Standard |
| Compliance | Designed to meet ASTM D5957, D618, E145, and ISO 554 requirements for laboratory drying, conditioning, and thermal stability testing |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | DCC1406 |
| Temperature Range | Ambient +15°C to 250°C (482°F) |
| Temperature Uniformity | ±1% (empty chamber, rated voltage) |
| Temperature Stability | ±0.5°C |
| Resolution | ±0.1°C |
| Chamber Dimensions (W×D×H) | 43.8 × 23.7 × 35.7 in (1113 × 602 × 907 mm) |
| External Dimensions (W×D×H) | 63 × 38.6 × 75.2 in (1600 × 980 × 1910 mm) |
| Chamber Volume | 21.6 cu.ft |
| Interior Material | Reinforced 304 Stainless Steel |
| Insulation | 4-inch fiberglass |
| Heating Method | Forced-air convection |
| Door Seal | High-integrity silicone gasket |
| Gas Management | Inert gas recirculation system with top-mounted exhaust valve and adjustable flowmeter |
| Electrical Options | 208–480 VAC, 1- or 3-phase, 50/60 Hz |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Cleanroom-Grade Mechanical Convection Drying Oven |
| Temperature Range | Ambient +15°C to 250°C (482°F) |
| Temperature Uniformity | ±1% (empty chamber, rated voltage) |
| Temperature Stability | ±0.5°C |
| Resolution | ±0.1°C |
| Chamber Material | Reinforced 304 Stainless Steel |
| Insulation | 4-inch fiberglass |
| Door Seal | Blue M Silicone Gasket |
| Heating Method | Forced-air convection with inert gas recirculation capability |
| External Dimensions (W×D×H) | 35×33.2×51 in to 63×38.6×75.2 in |
| Internal Dimensions (W×D×H) | 16.5×18×19.7 in to 43.8×23.7×35.7 in |
| Internal Volume | 3.4–21.6 cu.ft |
| Electrical Options | 208/240/480 VAC, 1Φ or 3Φ, 50/60 Hz |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model Series | DCI206 / DCI256 / DCI296 (Benchtop) |
| Temperature Range | Ambient +15°C to 250°C (482°F) |
| Temperature Uniformity | ±1% |
| Temperature Stability | ±0.5°C |
| Control Resolution | ±0.1°C |
| Interior Chamber Material | 304 Stainless Steel, Full-Welded Sealed Construction |
| Insulation | 4-inch Mineral Wool |
| Door Seal | Blue M Glass-Fiber Gasket |
| Heating Method | Forced-Air Circulation |
| External Dimensions (W×D×H) | 35×33.2×51 in to 63×38.6×75.2 in |
| Internal Dimensions (W×D×H) | 16.5×18×19.7 in to 43.8×23.7×35.7 in |
| Internal Volume | 4.2–9.0 cu.ft |
| Electrical Options | 208/240/480 VAC, Single- or Three-Phase, 50/60 Hz |
| Purge Gas Flow (SCFH) | 120–600 SCFH (model-dependent) |
| Compliance | Designed for GLP/GMP environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Embedded Oven |
| Temperature Range | Ambient +15°C to 300°C |
| Uniformity | ±1% of setpoint |
| Control Accuracy | ±1.0°C |
| Resolution | 0.1°C |
| Power Consumption | 6,600 W (at 125°C, 60 Hz) |
| Heating Method | Forced-air convection |
| Internal Dimensions | 25×25×25 in to 48×25×48 in (63.5×63.5×63.5 cm to 121.9×63.5×121.9 cm) |
| Construction | Reinforced 304 stainless steel interior, welded seam, 4″ fiberglass insulation, porcelain enamel exterior finish |
| Airflow Options | Horizontal or vertical dual-boost configuration |
| Standard Safety | Interlocked door, redundant overtemperature protection, customer power interlock |
| Fan Type | Direct-drive multi-blade centrifugal blower |
| Optional Features | Nitrogen purge, rear service access door, chart recorder (BI-9/BI-9V), floor stand, inlet port |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | ESP 400 Series Mechanical Convection Oven |
| Temperature Range | Ambient +15°C to 260°C |
| Temperature Uniformity | ±1% of setpoint |
| Heating Method | Forced-air horizontal convection |
| Internal Dimensions | 480 × 380 × 450 mm |
| Chamber Volume | 2.8 ft³ (0.079 m³) |
| Warm-up Time to 260°C (no load, vents closed) | 20 min @ 240 VAC |
| Controller | RKC RF100 with enhanced PID and auto-tuning algorithm |
| Overtemperature Protection | Dual independent system (CB100L/CB900L FM-approved controller + Partlow 1161 upper-limit controller) |
| Construction | 304 stainless steel interior, fully welded |
| Insulation | Fiberglass, double-wall insulated door |
| Airflow | Unidirectional horizontal airflow via centrifugal blower |
| Adjustable | Inlet/exhaust dampers, 7-position nickel-plated wire shelving |
| Compliance | FM-approved components, meets UL 61010-1 and CSA C22.2 No. 61010-1 safety standards |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Benchtop/Industrial Forced-Air Oven |
| Model | Frictionaire Series (e.g., HS-1004, HS-1204, HS-3804) |
| Max Temperature | 260°C |
| Temperature Uniformity | ±1.0°C at 200°C |
| Control Accuracy | ±1.0°C |
| Heating Method | High-Velocity Air Friction Heating (No Exposed Heating Elements) |
| Internal Dimensions | 35 × 43 × 31 cm to 93 × 93 × 120 cm |
| Max Power | 6500 W |
| Ramp Time to 260°C | 140 min |
| Airflow Velocity | 100–500 FPM |
| Compliance | UL-Listed (select models), CSA Certified, Designed for Class I, Division 1, Group D Hazardous Locations |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Benchtop/General-Purpose Gravity Convection Oven |
| Temperature Range | Ambient +10°C to 260°C (50°F to 500°F) |
| Temperature Uniformity | ≤±3% |
| Temperature Stability | ≤±1°C |
| Max Power | 3 kW |
| Heating Method | Vertical Upward Gravity Convection |
| Internal Dimensions | 300 × 300 × 300 mm to 600 × 500 × 750 mm |
| Construction | Stainless Steel Interior, Powder-Coated Exterior |
| Controller | Digital PID with Setpoint Operation |
| Compliance | Designed for GLP-compliant environments |
| Brand | HunterLab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Tenney Blue M Gruenberg Lindberg Kayex |
| Instrument Type | Box-Type High-Temperature Oven |
| Max Temperature | 700°C |
| Temperature Uniformity | ±0.5°C (at setpoint, steady-state) |
| Max Power | 7.5 kW |
| Ramp Time to 700°C | ≤60 min |
| Heating Method | Forced-Air Circulation |
| Internal Chamber Dimensions | 20 × 18 × 20 in to 48 × 24 × 36 in (508 × 457 × 508 mm to 1219 × 610 × 914 mm) |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF 8880 |
| Type | Benchtop/Industrial Box-Type Atmosphere Furnace |
| Max Temperature | 593°C (1099°F) |
| Temperature Uniformity | ±2% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced-Air Convection with Incoloy® Sheathed Heating Elements |
| Internal Dimensions | 122 × 61 × 91 cm (W×D×H) |
| Power Rating | 30.0 kW (at 240 VAC, 3-Phase) |
| Insulation | 6-inch mineral wool |
| Door Seal | Fiberglass-reinforced silicone gasket |
| Cooling | Water-cooled door (IGF 8880 & IGF 9980 models) |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ / 96% N₂) |
| Safety Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Inert Atmosphere Box Furnace |
| Max Temperature | 593°C |
| Temperature Uniformity | ±2% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced Air Circulation |
| Internal Dimensions | 51×46×51 cm to 122×61×91 cm |
| Insulation | 152 mm (6″) Mineral Wool |
| Power Input | Up to 30.0 kW (480 VAC, 3-Phase) |
| Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF-6680 / IGF-7780 / IGF-8880 / IGF-9980 |
| Type | Benchtop & Floor-Standing Inert-Gas Box Furnace |
| Max Temperature | 593°C (1099°F) |
| Temperature Uniformity | ±2% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced-air convection with heavy-duty NiCr heating elements |
| Internal Dimensions | 51×46×51 cm to 122×61×91 cm |
| Insulation | 152 mm (6 in) mineral wool |
| Power Input | Up to 30.0 kW (480 VAC, 3-phase) |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ / 96% N₂) |
| Safety Compliance | NFPA 86 Class B |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | IGF-7780 |
| Type | Benchtop/Industrial Box-Type Furnace |
| Max Temperature | 593°C |
| Temperature Uniformity | ±2% of setpoint |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced-air convection with heavy-duty NiCr heating elements |
| Internal Dimensions (W×D×H) | 64 × 51 × 51 cm |
| Power Rating | 30.0 kW @ 240 VAC 3-phase |
| Insulation | 152 mm (6") mineral wool |
| Gas Compatibility | N₂, Ar, He, CO₂, and forming gas (4% H₂ / 96% N₂) |
| Safety Certifications | NFPA 86 Class B compliant |
| Door Type | Water-cooled (on IGF-8880/9980 models), standard insulated door on IGF-7780 |
| Exhaust & Purge System | Integrated blow-down timer, pressure monitoring, vent valve, and relief valve |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Inert Gas Cabinet Oven |
| Max Temperature | 316°C |
| Temperature Uniformity | ±2% of setpoint |
| Max Power | 48 kW |
| Ramp Time to Max Temp | 60 min |
| Heating Method | Forced-air convection |
| Internal Dimensions | 60.7 × 60.7 × 121.9 mm (W×D×H) |
| Compliance | NEC-compliant design, UL-listed components |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Inert Atmosphere Oven |
| Temperature Range | Ambient +15°C to 700°C |
| Temperature Uniformity | ±1% (at ≤316°C), ±2% (at 700°C) |
| Control Accuracy | ±0.5°C |
| Resolution | ±0.1°C |
| Heating Method | Forced Air Convection |
| Internal Dimensions | 20×18×20 in to 48×24×36 in (508×457×508 mm to 1219×610×914 mm) |
| Internal Volume | 1.6–24 cu.ft (0.045–0.679 m³) |
| Max Power | 7500 W |
| Ramp Time to Max Temp | ≤60 min |
| Insulation | 4-inch (102 mm) mineral wool |
| Chamber Material | Fully welded 304 stainless steel |
| Door Seal | Blue M proprietary fiberglass-reinforced gasket |
| Safety | Interlocked door switch, inert gas purge integrity monitoring |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Blue M Inert Atmosphere Oven |
| Instrument Type | Benchtop/Box-Type Laboratory Oven |
| Max Operating Temperature | 700 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Method | Forced-Air Convection |
| Internal Dimensions (W×D×H) | 20×18×20 to 48×24×36 in (508×457×508 to 1219×610×914 mm) |
| Insulation | 4-inch Mineral Wool |
| Door Seal | High-Performance Fiberglass Gasket |
| Temperature Range | Ambient +15 °C to 316 °C (for inert gas models) |
| Uniformity | ±1% (at ≤316 °C), ±2% (at 700 °C) |
| Resolution | 0.1 °C |
| Power Rating | 7.5 kW |
| Ramp Time to 300 °C | ≤60 min (no-load, exhaust closed) |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | LinkTenn 32 |
| Temperature Range | Ambient to 700 °C |
| Temperature Uniformity | ±0.5 °C |
| External Dimensions | 35 × 33.2 × 51 in to 63 × 38.6 × 75.2 in |
| Internal Chamber Dimensions | 20 × 18 × 20 in to 48 × 24 × 36 in |
| Interior Material | 304 Stainless Steel |
| Heating Method | Forced-Air Convection |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | Benchtop/Free-Standing Forced-Air Laboratory Oven |
| Max Temperature | 260°C |
| Temperature Uniformity | ≤ ±3% |
| Control Accuracy | ±1°C |
| Heating Method | Horizontal Forced-Air Convection |
| Internal Dimensions | 300 × 300 × 300 mm to 790 × 710 × 1450 mm |
| Max Power | 11 kW |
| Construction | Stainless Steel Interior, Powder-Coated Steel Exterior |
| Compliance | Designed for GLP-compliant thermal processing environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | 146 |
| Instrument Type | High-Temperature Forced-Air Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% of setpoint |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Chamber Dimensions (Interior) | 20×18×20 cm to 48×24×36 cm |
| External Dimensions | 40×34×57 cm to 68×40×82 cm |
| Interior Construction | Fully welded 304 stainless steel chamber |
| Insulation | 102 mm (4 in) fiberglass insulation |
| Airflow System | Horizontal forced-air circulation with single-pass and recirculation mode selection |
| Heating Element | Blue M Eterna™ high-reliability nichrome wire heater, ceramic-insulated |
| Door Seal | Dual-blade silicone rubber gasket |
| Access Port | 76 mm (3 in) diameter pass-through port centered on right side |
| Control Mode | Programmable or constant-temperature operation |
| Exhaust | DC-driven multi-blade centrifugal fan with dynamic balancing |
| Compliance | Designed for ASTM D5422, UL 746B, IPC-TM-650 2.6.22, and aging test protocols per IEC 60068-2-2 and MIL-STD-810H |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Blue M 146 Standard Mechanical Convection Oven |
| Instrument Type | Benchtop/General-Purpose Forced-Air Oven |
| Maximum Operating Temperature | 350 °C |
| Temperature Uniformity | ±1% of setpoint (at steady state, full load) |
| Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Heating Method | Horizontal mechanical convection (adjustable single-pass or recirculating airflow) |
| Internal Chamber Dimensions | 20″ × 18″ × 20″ to 48″ × 24″ × 36″ (508 × 457 × 508 mm to 1219 × 610 × 914 mm) |
| Rated Power | 7.5 kW |
| Typical Ramp Time to 350 °C | ≤60 min (dependent on chamber volume and load) |
| Insulation | 4″ (102 mm) fiberglass blanket |
| Construction | 16-gauge (1.5 mm) cold-rolled steel exterior |
| Door Seal | High-temperature silicone gasket with dual compression design |
| Optional Features | 3″ (76 mm) rear-mounted conduit port |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model Series | 166, 246, 326, 366, 606, 966 |
| Temperature Range | Ambient to 316°C |
| Temperature Uniformity | ±1.5–2.0% of setpoint |
| Temperature Stability | ±0.5°C |
| Interior Material | 304 Stainless Steel |
| Insulation | 102 mm (4 in) Fiberglass |
| Heating Method | Forced-air convection |
| External Casing | 14–16 gauge cold-rolled steel |
| Finish | White porcelain enamel coating |
| Door | Dual-wall insulated with manual adjustable air inlet/outlet valves |
| Interior Volumes | 16.0–96.0 ft³ |
| Compliance | Designed for GLP/GMP environments |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Type | High-Temperature Inert Atmosphere Drying Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Chamber Construction | Fully Welded 304 Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Insulation | 4-inch Mineral Wool |
| Door Seal | Blue M Fiberglass Gasket |
| Purge Gas Compatibility | N₂, Ar, Forming Gas (N₂/H₂), or Other Inert/Non-Flammable Gases |
| Electrical Options | 208–480 VAC, Single- or Three-Phase, 50/60 Hz |
| Internal Volume | 4.2–24.0 cu.ft |
| External Dimensions (W×D×H) | 40×34×57 to 68×40×82 in |
| Internal Dimensions (W×D×H) | 20×18×20 to 48×24×36 in |
| Brand | Blue M |
|---|---|
| Origin | USA |
| Model | Nitrogen Purge Drying Oven |
| Temperature Range | Ambient +15°C to 350°C |
| Temperature Uniformity | ±1% |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Chamber Construction | Fully welded 304 stainless steel |
| Insulation | 4-inch mineral wool |
| Door Seal | High-integrity fiberglass-reinforced gasket |
| Gas Compatibility | Inert and non-flammable gases (N₂, Ar, forming gas) |
| Purge Flow Rates | 25–600 SCFH (model-dependent) |
| Power Options | 208/240/480 VAC, single- or three-phase, 50/60 Hz |
| Internal Volume | 4.2–24.0 cu.ft |
| External Dimensions (W×D×H) | 40×34×57 to 68×40×82 in |
| Chamber Dimensions (W×D×H) | 20×18×20 to 48×24×36 in |
| Heating Method | Forced-air convection |