Constant Temp/Heating/Drying Equipment
Filter
Showing 3211–3240 of 3271 results
| Brand | Zhuochi |
|---|---|
| Origin | Zhejiang, China |
| Model | XL-2A |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C (in steady-state) |
| Temperature Uniformity | ±2 °C (at 1000 °C) |
| Display Resolution | 1 °C |
| Heating Rate | Adjustable up to 10 °C/min |
| Programmable Segments | 30-step ramp-soak profile |
| Internal Chamber Dimensions | 300 × 200 × 120 mm |
| Nominal Volume | 8 L |
| Power Rating | 4 kW |
| Supply Voltage | 220 V, 50 Hz |
| Net Weight | ~110 kg |
| Heating Element | High-Temperature Resistance Wire |
| Insulation | Refractory Brick + Ceramic Fiber Insulation |
| Thermocouple Type | K-type, rear-mounted |
| Safety Features | Dual-stage overtemperature protection, earth leakage circuit breaker (ELCB), insulated enclosure with powder-coated cold-rolled steel casing |
| Brand | Zhuochi |
|---|---|
| Origin | Zhejiang, China |
| Model | ZCSK3-12-8 |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 12 kW |
| Heating Rate (to max temp) | ≤20 °C/min |
| Heating Method | Resistance wire (0Cr27Al7Mo2 alloy) |
| Chamber Dimensions | Ø200 × 1300 mm |
| Effective Tube Length | 1200 mm |
| Tube OD | Ø200 mm |
| Vacuum Level | −0.1 MPa |
| Control System | LTDE 30-segment programmable PID controller with K-type thermocouple |
| Power Supply | 380 V, 50 Hz |
| Compliance | CE-marked electrical architecture, GLP-ready temperature logging interface |
| Brand | Zhuochi |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ZSG-GL1200K |
| Instrument Type | Rotary Tube Furnace |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 2.5 kW |
| Max Heating Rate | 30 °C/min |
| Heating Method | Resistance Wire (0Cr27Al7Mo2 Alloy) |
| Internal Chamber Dimensions | 60 mm (ID) × 400 mm (Heating Zone Length) |
| Effective Tube Volume | ~1.13 L (based on Φ60 mm × 400 mm) |
| Vacuum Capability | –0.1 MPa (absolute) |
| Tilt Angle | 15° |
| Rotation Function | Yes |
| Sealing | Stainless Steel Flange with Quartz Tube |
| Gas Inlet | Equipped with Float Flowmeter |
| Thermal Insulation | Dual-layer Al₂O₃ Polycrystalline Fiber + Ceramic Fiber Blanket |
| Temperature Sensor | S-Type Platinum-Rhodium Thermocouple |
| Controller | LTDE Programmable PID Controller (50-Stage Ramp/Soak) |
| Safety | Dual-Stage Over-Temperature Protection |
| Power Supply | 220 V, 50 Hz |
| Brand | Zhonghuan Furnace |
|---|---|
| Origin | Tianjin, China |
| Model | ZHX-03173 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1700 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 4 kW |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 150 × 140 × 140 mm |
| Chamber Volume | 3 L |
| Voltage | 220 V AC, Single-Phase |
| Weight | 140 kg |
| External Dimensions | 667 × 629 × 1023 mm |
| Brand | ZHONGHUAN FURNACE |
|---|---|
| Origin | Tianjin, China |
| Model | ZHX-18173 |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1700 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 18 kW |
| Internal Chamber Dimensions | 300 × 250 × 250 mm |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Voltage Requirement | 380 V AC (Three-Phase) |
| Cooling System | Auto-Activated Surface-Cooling Fan (Triggered at ≥50 °C External Surface Temp) |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9030A (30 L) |
| Temperature Range | RT+10 to 300 °C |
| Temperature Uniformity | ±3% (at 100 °C) |
| Temperature Fluctuation | ±1.0 °C |
| Temperature Resolution | 0.1 °C |
| Internal Chamber Dimensions (W×D×H) | 350 × 350 × 350 mm |
| External Dimensions (W×D×H) | 625 × 540 × 500 mm |
| Chamber Material | Mirror-Finish Stainless Steel (SUS304) |
| Heating Method | Forced-Air Circulation with Adjustable-Speed Fan |
| Operating Ambient Temperature | 5–40 °C |
| Power Input | 850 W |
| Standard Shelving | 2 adjustable stainless steel trays |
| Timer Range | 1–9999 minutes |
| Optional Features | RS485 interface for data logging |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9070A (70L) |
| Instrument Type | High-Temperature Drying Oven |
| Temperature Range | RT+10°C to 300°C |
| Temperature Fluctuation | ±1.0°C |
| External Dimensions | 735 × 615 × 630 mm |
| Control Range | RT+10°C to 300°C |
| Interior Chamber Dimensions | 450 × 350 × 450 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 5–40°C |
| Interior Material | Mirror-Finish Stainless Steel (SUS304) |
| Heating Method | Forced-Air Circulation |
| Temperature Uniformity | ±3% (measured at 100°C) |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9140A (136 L Capacity) |
| Temperature Range | RT + 10 °C to 300 °C |
| Temperature Uniformity | ±3% at 100 °C |
| Temperature Fluctuation | ±1.0 °C |
| Temperature Resolution | 0.1 °C |
| Internal Chamber Dimensions (W×D×H) | 450 × 550 × 550 mm |
| External Dimensions (W×D×H) | 835 × 670 × 730 mm |
| Heating Method | Forced-Air Circulation |
| Inner Chamber Material | Mirror-Finish Stainless Steel (SUS304) |
| Operating Ambient Temperature | 5–40 °C |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 2050 W |
| Standard Shelving | 4 adjustable stainless steel trays |
| Timer Range | 1–9999 minutes |
| Optional Features | Independent Over-Temperature Cut-Off Protection |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9240A (220 L) |
| Temperature Range | RT +10 °C to 300 °C |
| Temperature Fluctuation | ±1.0 °C |
| External Dimensions | 880 × 800 × 830 mm |
| Internal Chamber Dimensions | 500 × 600 × 750 mm |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | 5–40 °C |
| Interior Material | Mirror-Finish Stainless Steel (SUS304) |
| Heating Method | Forced-Air Circulation |
| Temperature Uniformity | ±3% (at 100 °C test point) |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 2500 W |
| Timer Range | 1–9999 min |
| Standard Shelving | 2 adjustable stainless steel trays |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | DZF-6020 |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 °C to 250 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Resolution | 0.1 °C |
| Vacuum Level | ≤133 Pa |
| Chamber Dimensions (W×D×H) | 300 mm × 300 mm × 275 mm |
| External Dimensions (W×D×H) | 615 mm × 470 mm × 470 mm |
| Inner Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced-Air Convection |
| Operating Ambient Temperature | +5 °C to 40 °C |
| Power Supply | 220 V / 50 Hz |
| Heating Power | 400 W |
| Shelf Quantity | 1 |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | DZF-6030 |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 250 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Resolution | 0.1 °C |
| Vacuum Degree | ≤133 Pa |
| Chamber Dimensions (W×D×H) | 320×320×300 mm |
| External Dimensions (W×D×H) | 600×450×470 mm |
| Heating Method | Forced Air Circulation |
| Inner Chamber Material | Stainless Steel (SUS304) |
| Operating Ambient Temperature | +5 to 40 °C |
| Power Rating | 500 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Shelf Configuration | 1 adjustable stainless steel shelf |
| Vacuum Pump | Optional external pump (not included) |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | DZF-6050 |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 250 °C |
| Temperature Fluctuation | ±1 °C |
| External Dimensions | 830 × 640 × 540 mm |
| Internal Chamber Dimensions | 415 × 370 × 345 mm |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | +5 to 40 °C |
| Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced Air Circulation |
| Temperature Uniformity | ±1 °C |
| Ultimate Vacuum Level | ≤133 Pa |
| Brand | Ziqi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Models | B12, B20, B30, C12, C20, C30 |
| Power Rating | 800 W (B/C series) |
| Input Voltage/Frequency | 220 V / 50 Hz |
| Temperature Range | 40–120 °C |
| Temperature Accuracy | ±5 °C |
| Air Tube Length | 170 mm / 200 mm |
| Air Tube Diameters | 9 mm, 12 mm, 17 mm |
| Number of Drying Ports | 12, 20, or 30 |
| Dimensions (Ø × H) | Φ400 × 400 mm |
| Weight | 7–8 kg |
| Housing Material | B-series — Powder-Coated Steel |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Models | HH-S11, HH-S12, HH-S24, HH-S26, HH-S28 |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Control Accuracy | ±0.5°C |
| Heating Power | 300W–1800W (model-dependent) |
| External Dimensions (W×D×H) | 205×205×230 mm to 345×660×230 mm |
| Inner Chamber Material | 304 Stainless Steel, One-Piece Drawn Construction |
| Safety Features | Dry-run protection (P-series only) |
| Power Supply | 220 V / 50 Hz |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Models | HH-S11P, HH-S12P, HH-S24P, HH-S26P, HH-S28P |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Control Accuracy | ±0.5°C |
| Heating Power | 300W–1800W (model-dependent) |
| External Dimensions (W×D×H) | 205×205×230 mm to 345×660×230 mm |
| Chamber Material | 304 Stainless Steel, Seamless Deep-Drawn Construction |
| Dry-Run Protection | Yes (P-series only) |
| Power Supply | 220 V AC / 50 Hz |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | HH-W420 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | None |
| Temperature Control Mode | Heating-Only |
| Bath Chamber Dimensions | 420 × 180 × 200 mm (L×W×H) |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Input Power | 1.5 kW |
| Supply Voltage | 220 V AC, 50 Hz |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HH-W600 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | None |
| Temperature Control Mode | Heating-Only |
| Bath Chamber Dimensions (L×W×H) | 600 × 300 × 210 mm |
| Temperature Range | RT + 5 °C to 100 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 1.5 kW |
| Supply Voltage | 220 V, 50 Hz |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | ZiQi Instrument Co., Ltd. |
| Model | MD-10 |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ±0.1°C |
| Heating Time | ≤15 min (25°C → 100°C) |
| Dimensions (W×D×H) | 270 × 190 × 170 mm |
| Net Weight | 2.2 kg |
| Temperature Uniformity | ≤±0.3°C |
| Temperature Stability | ≤±0.3°C |
| Max Power | 150 W |
| Timer Range | 1 min – 99 h 59 min |
| Display | LCD with dual-set temperature/time interface |
| Safety Features | Over-temperature protection, auto fault detection with audible alarm, built-in calibration offset adjustment |
| Module Compatibility | Interchangeable aluminum blocks for tubes (0.2–50 mL), microplates, and custom wells (e.g., 96-well PCR plates, 35×1.5 mL, 24×5 mL, 6×50 mL, etc.) |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MD-20 (Refrigerated) |
| Temperature Range | −10 °C to 100 °C |
| Temperature Accuracy | ±0.1 °C |
| Heating Time | ≤15 min (from 25 °C to 100 °C) |
| Cooling Time | ≤15 min (from 20 °C to −5 °C) |
| Dimensions | 300 × 220 × 170 mm |
| Net Weight | 4.5 kg |
| Temperature Uniformity | ≤±0.3 °C |
| Temperature Stability | ≤±0.3 °C |
| Display Resolution | 0.1 °C |
| Timer Range | 1 min to 99 h 59 min |
| Max Power Consumption | 150 W |
| Compatible Modules | A–M (96-well PCR plates, 0.2–50 mL tube formats) |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | MD150-1 |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Accuracy | ±0.1°C (display resolution), ±0.5°C (control accuracy) |
| Heating Time | ≤30 min (40°C → 150°C) |
| Dimensions (W×D×H) | 230 × 220 × 95 mm |
| Net Weight | 3.8 kg |
| Uniformity @100°C | ±0.5°C |
| Uniformity @150°C | ±1.0°C |
| Max Power | 200 W |
| Timer Range | 1–99 h 59 min |
| Programmable Profiles | 5 user-defined temperature ramps |
| Cooling Mechanism | Integrated side-mounted thermal management fan |
| Module Compatibility | 17 interchangeable aluminum blocks (0.2–40 mL formats) |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | MD150-2 Dual-Block |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Accuracy | ±0.5°C |
| Temperature Uniformity | ≤±0.5°C at 100°C |
| Display Resolution | 0.1°C |
| Heating Time | ≤30 min (40°C → 150°C) |
| Dimensions (W×D×H) | 260 × 220 × 95 mm |
| Net Weight | 5 kg |
| Max Power | 400 W |
| Timer Range | 1–99 h 59 min |
| Programmable Profiles | 5 user-defined temperature-time programs |
| Cooling Mechanism | Integrated side-mounted thermal management fan with internal high-temp sensor activation |
| Block Compatibility | 17 interchangeable aluminum blocks for tubes ranging from 0.2 mL PCR strips to 40 mm diameter vessels |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MDS-100 |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ±0.1°C |
| Temperature Uniformity | ≤±0.3°C |
| Temperature Stability | ≤±0.3°C |
| Heating Rate | ≤15 min (25°C → 100°C) |
| Oscillation Speed | 200–1500 rpm |
| Oscillation Mode | Horizontal rotary (3 mm amplitude) |
| Timer Range | 1 min – 99 h 59 min |
| Display | LCD with real-time parameter feedback |
| Power Consumption | 150 W |
| Dimensions (W×D×H) | 300 × 220 × 170 mm |
| Net Weight | 8.5 kg |
| Safety Certification | CE-compliant |
| Motor Type | Brushless DC motor |
| Recovery Function | Power-loss resume with original program retention |
| Calibration | Built-in temperature calibration routine |
| Interlock & Overheat Protection | Dual-layer thermal cutoff and auto-shutdown |
| Brand | ZiQi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Models | ZOB-2L, ZOB-5L, ZOB-10L, ZOB-20L, ZOB-50L |
| Bath Volume | 2 L (ZOB-2L) to 50 L (ZOB-50L) |
| Temperature Range | Ambient to 250 °C |
| Temperature Stability | ≤ ±1 °C |
| Temperature Resolution | 1 °C |
| Heating Power | 1.5–6.0 kW (model-dependent) |
| Input Voltage | 220 V AC, 50 Hz |
| Construction | Cold-Rolled Steel Exterior, 304 Stainless Steel Seamless Inner Bath |
| Lift Mechanism | Manual or Motorized Vertical Adjustment (Model-Dependent) |
| Control Mode | PID-Based Digital Thermostat with LED Display |
| Safety Features | Over-Temperature Auto-Cut-Off Protection |
| Operating Environment | 5–40 °C ambient, ≤80% RH |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | ZK95-50 |
| Temperature Range | −190 °C to 1000 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Chamber Internal Dimensions | Φ95 mm × 50 mm |
| Chamber Material | 304 Stainless Steel |
| Viewport Diameter | Φ47 mm |
| Vacuum Interface | KF25 (pumping), KF16 (vacuum gauge), 6 mm Ball Valve (inlet) |
| Electrical Feedthrough | Dual 8-pin hermetic signal connectors (4 A rating) |
| Maximum Positive Pressure | ≤0.1 MPa |
| Ultimate Vacuum | ≤5 Pa (mechanical pump, 5 min), ≤5×10⁻³ Pa (turbo-molecular pump, 30 min) |
| Sample Stage | 28 mm × 28 mm stainless steel, resistively heated, equipped with PT100 sensor |
| Heating Rate (High-Temp Mode) | up to 20 °C/min |
| Control System | 7-inch touchscreen HMI, 30-segment programmable PID with auto-tuning |
| Data Logging | Real-time & historical temperature curves, exportable CSV files |
| Optional Inputs | K/S/B-type thermocouples or RTD |
| Brand | Zuofei |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DHG-9023A |
| Instrument Type | High-Temperature Forced-Air Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 30×30×28 cm |
| External Dimensions (W×D×H) | 58×50×45 cm |
| Inner Chamber Material | Mirror-Finish Stainless Steel (SUS304) |
| Operating Ambient Temperature | +5°C to +40°C |
| Power Supply | 220 V, 50 Hz |
| Rated Power | 320 W |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Timer Range | 1–9999 minutes |
| Safety Features | Dual independent overtemperature protection circuits, leakage current protector |
| Brand | Zuofei |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | DHG-9030A |
| Instrument Type | General-Purpose Forced-Convection Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Fluctuation | ±1.0°C |
| External Dimensions (W×D×H) | 45×58×69 cm |
| Internal Chamber Dimensions (W×D×H) | 30×30×35 cm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Bottom-Mounted Stainless Steel Electric Heating Elements |
| Temperature Uniformity | ±2.5% (at 100°C test point) |
| Power Supply | 220 V / 50 Hz |
| Input Power | 700 W |
| Chamber Volume | 31.5 L |
| Standard Shelving | 2 adjustable stainless steel trays (max. 5) |
| Timer Range | 1–9999 minutes |
| Brand | Zuofei |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9036A |
| Instrument Type | High-Temperature Forced-Air Oven |
| Temperature Range | RT+10°C to 300°C |
| Temperature Fluctuation | ±1.0°C |
| External Dimensions (W×D×H) | 45×58×69 cm |
| Internal Chamber Dimensions (W×D×H) | 30×30×35 cm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Bottom-Mounted Stainless Steel Electric Heating Elements |
| Temperature Uniformity | ±2.5% (measured at 100°C) |
| Brand | Zuofei |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9053A |
| Instrument Type | High-Temperature Drying Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±1.0°C |
| External Dimensions (W×D×H) | 68×59×52 cm |
| Internal Chamber Dimensions (W×D×H) | 42×35×35 cm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Brand | Zuofei |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9070A |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Fluctuation | ±1.0°C |
| External Dimensions (W×D×H) | 55×61×79 cm |
| Internal Chamber Dimensions (W×D×H) | 40×40×45 cm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | +5°C to +40°C |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Bottom-Mounted Stainless Steel Electric Heating Elements |
| Temperature Uniformity | ±2.5% (measured at 100°C) |
| Brand | Zuofei |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DHG-9076A |
| Instrument Type | High-Temperature Forced-Air Oven |
| Temperature Range | RT+10 °C to 300 °C |
| Temperature Fluctuation | ±1.0 °C |
| External Dimensions (W×D×H) | 55×61×79 cm |
| Internal Dimensions (W×D×H) | 40×40×45 cm |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | +5 °C to +40 °C |
| Interior Material | Mirror-Finish Stainless Steel |
| Heating Method | Bottom-Mounted Stainless Steel Electric Heating Element |
| Temperature Uniformity | ±2.5% (measured at 100 °C) |