Constant Temp/Heating/Drying Equipment
Filter
Showing 2131–2160 of 3291 results
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HT 04/16 – HT 16/18 |
| Furnace Type | Vertical Muffle Furnace |
| Max Temperature | 1600°C – 1800°C |
| Temperature Uniformity | ±1°C |
| Heating Element | Molybdenum Disilicide (MoSi₂) |
| Internal Dimensions | 150×150×150 mm to 260×300×200 mm |
| Chamber Volume | 4 L – 450 L |
| Max Power Input | 5.2 kW – 12.0 kW |
| Ramp Time to Max Temp | ≤60 min |
| Power Supply | 3-phase, 400 V |
| Thermal Insulation | High-purity Al₂O₃ fiber module construction |
| Safety | Dual-stage overtemperature protection (mechanical limiter + electronic controller), B-type thermocouple (PtRh30/PtRh6), chain-guided parallel door mechanism, helical locking system, reinforced hearth option, inert gas purge ports, optional forced-air cooling fan & automated venting |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HTC03/14–HTC08/16 |
| Type | Benchtop Box Muffle Furnace |
| Max Temperature | 1400 °C / 1500 °C / 1600 °C |
| Chamber Dimensions (W×D×H) | 120×210×120 mm or 170×290×170 mm |
| Chamber Volume | 3 L or 8 L |
| External Dimensions (W×D×H) | 400×535×530 mm or 450×620×570 mm |
| Power Supply | 3-phase, 9.0 kW or 13.0 kW |
| Weight | 30–40 kg |
| Heating Time to Max Temp | ≤40–60 min (dependent on model & setpoint) |
| Heating Element | Silicon Carbide (SiC) rods |
| Construction | Double-walled stainless steel housing with fiber insulation |
| Compliance | EN 60519-2 Class 2 thermal overtemperature protection |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Temperature Uniformity | ±1 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 170 × 290 × 170 mm |
| Max Power Input | 13.0 kW |
| Ramp Time to Max Temperature | ≤45 min |
| Construction | Dual-Wall Stainless Steel Housing with Ceramic Fiber Insulation |
| Compliance | EN 60519-2 (Thermal Protection Class 2), CE Marked |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HTCT01/14, HTCT08/16 |
| Max Temperature | 1400 °C / 1500 °C / 1600 °C |
| Chamber Dimensions (W×D×H) | 110×120×120 mm to 170×290×170 mm |
| Chamber Volume | 1.5 L to 8.0 L |
| External Dimensions (W×D×H) | 340×300×460 mm to 450×620×570 mm |
| Power Supply | 1-phase or 3-phase |
| Rated Power | 3.5 kW to 13.0 kW |
| Weight | 18 kg to 60 kg |
| Heating Element | Silicon Carbide (SiC) rods |
| Construction | Double-walled stainless steel housing with fiber insulation |
| Door Type | Top-opening (HTCT series) or front-opening (HTC series) |
| Compliance | EN 60519-2 (thermal protection class 2), optional overtemperature limiter |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model Range | K1/10, K2/10, K4/10, K1/132, K2/132, K4/132, KC1/153, KC2/153 |
| Max Temperature | 1000 °C, 1300 °C or 1500 °C |
| Crucible Capacity | 1 L, 2 L or 4 L |
| External Dimensions (W × D × H) | 520–580 mm × 630–755 mm × 580–705 mm |
| Power Supply | 1-phase (3–5.5 kW) or 3-phase (10.5 kW) |
| Weight | 85–170 kg |
| Crucible Type | Graphite (standard), optional steel or SiC |
| Tilt Mechanism | Pneumatic spring-assisted tilting with damper |
| Casting Trough | Integrated front-mounted (except KC series) |
| Overtemperature Protection | EN 60519-2 Class 2 thermal cut-off |
| Viewing Port | Integrated observation window |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 1/12 – LT 40/12 |
| Heating Temperature Range | 1100 °C or 1200 °C |
| Chamber Volume | 1–40 L |
| Power Supply | 1-phase (230 V) or 3-phase (400 V) |
| Heating Configuration | Dual-sided ceramic heating plates (triple-sided for L 24/11 – LT 40/12) |
| Insulation | High-purity alumina-silica safety fiber |
| Construction | Double-walled stainless steel housing (brushed finish) |
| Door Options | Front-opening (L) or top-opening (LT) |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Data Logging | NTLog via USB flash drive |
| Optional Accessories | Gas purge interface, exhaust chimney with fan/catalyst, VCD process control software |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 15/14 |
| Type | Box Muffle Furnace |
| Max Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3.2 kW |
| Heating Time to Max Temp | 70 min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 230 × 240 × 170 mm |
| Nominal Volume | 15 L |
| External Construction | Double-Wall Insulated Casing |
| Thermal Insulation Material | TRGS 905 Class 1 or 2 Non-Carcinogenic Ceramic Fiber |
| Door | Adjustable Air Intake |
| Rear Wall | Exhaust Vent |
| Controller | Nabertherm NTLog (USB Data Logging) |
| Safety | EN 60519-2 Compliant Overtemperature Limiter (Thermal Protection Class 2) |
| Optional | Inert/Reactive Gas Inlet Port, Exhaust Chimney with Fan or Catalyst, Manual/Automatic Gas Supply System |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 24/11 BO |
| Instrument Type | Box-type Muffle Furnace |
| Max Temperature | 1100°C |
| Temperature Control Accuracy | ±1°C |
| Max Power | 9000 W |
| Ramp Time to Max Temp | 95 min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 250 × 280 × 340 mm |
| Exhaust Treatment | Thermal & Catalytic Afterburning up to 850°C |
| Air Preheating | Yes (via bottom heating plate) |
| Safety Compliance | EN 60519-2 Class 2 Overtemperature Protection |
| Insulation Material | Non-carcinogenic Ceramic Fiber (TRGS 905 Class 1/2) |
| Construction | Double-walled Stainless Steel Casing with Textured Finish |
| Door Mechanism | Spring-assisted Mechanical Lock |
| Data Logging | NTLog Basic (USB flash drive) |
| Optional Software | VCD Process Control & Documentation Suite |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 5/13 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1300 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 2.4 kW |
| Heating Time to Max Temp | 45 min |
| Heating Method | Resistance Wire (NiCr Alloy) |
| Internal Dimensions (W×D×H) | 130 × 170 × 200 mm |
| External Dimensions (W×D×H) | 549 × 450 × 580 mm |
| Weight | 42 kg |
| Electrical Supply | Single-phase, 230 V, 50/60 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11 |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100°C |
| Temperature Uniformity | ±3°C |
| Max. Power | 3.0 kW |
| Heating Time to 1100°C | 75 min |
| Heating Method | Dual-Side Ceramic Heating Panels |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| External Dimensions (W×D×H) | 415 × 455 × 515 mm |
| Weight | 35 kg |
| Electrical Supply | Single-phase 230 V, 50/60 Hz |
| Insulation | High-Density Ceramic Fiber |
| Door Configuration | Front-Opening (L-series) |
| Air Inlet | Adjustable on Door |
| Rear Exhaust Port | Yes |
| Overtemperature Protection | Independent Limit Controller per EN 60519-2 Class 2 |
| Optional Accessories | USB Data Logger (NTLog), VCD Process Control Software, Gas Purge Interface, Catalytic Exhaust System |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11/SKM |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 3.0 kW |
| Heating Time to Max Temp | 90 min |
| Heating Method | Resistance Wire (Embedded in Ceramic Chamber) |
| Internal Dimensions | 230 × 240 × 170 mm (W × D × H) |
| Chamber Volume | 9 L |
| External Dimensions | 490 × 505 × 580 mm (W × D × H) |
| Weight | 90 kg |
| Electrical Supply | 1-phase, 230 V, 50 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11/SW, L 9/12/SW, LT 9/11/SW, LT 9/12/SW |
| Type | Box-type muffle furnace with integrated thermogravimetric measurement |
| Max. temperature | 1100 °C or 1200 °C |
| Internal dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber volume | 9 L |
| External dimensions (W×D×H) | 480 × 550 × 800 mm (L-series) or 480 × 550 × (800+290) mm (LT-series) |
| Power supply | 3.0 kW, single-phase |
| Weight | 55 kg (L), 75–90 kg (LT) |
| Heat-up time to max. temperature | 75–90 min |
| Weighing system options | EW-1500 (d = 0.01 g, max = 1500 g incl. lever), EW-3000 (d = 0.01 g, max = 3000 g), EW-6000 (d = 0.10 g, max = 6000 g) |
| Lever weight | 850 g |
| Minimum load | 0.5 g (EW-1500/EW-3000), 5.0 g (EW-6000) |
| Repeatability | ±0.01 g (EW-1500/EW-3000), ±0.10 g (EW-6000) |
| Brand | Nabertherm |
|---|---|
| Model | L3–L40 |
| Max. Temperature | 1100 °C / 1200 °C |
| Effective Chamber Volume | 3–40 L |
| Voltage | 230 V, 1/N |
| Power Rating | 1.2–6.0 kW |
| Weight | 20–95 kg |
| Construction | Dual-layer stainless steel housing |
| Insulation | Vacuum-formed ceramic fiber modules (standard) |
| Heating Elements | Embedded resistive wire in ceramic heating plates |
| Controller | Standard B170 digital PID (ramp-soak programming) |
| Air Management | Adjustable inlet on door |
| Safety | Low external surface temperature |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L, LT 9/11/SKM |
| Max. Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber Volume | 9 L |
| External Dimensions (W×D×H) | 490 × 505 × 580 mm |
| Electrical Connection | 1-phase, 230 V, 50 Hz |
| Power Rating | 3.4 kW |
| Net Weight | 90 kg |
| Heating Element | Embedded Ceramic-Sheathed Resistance Wire |
| Chamber Material | Corrosion-Resistant Ceramic Fiber Liner with Smooth, Non-Shedding Surface |
| Door Options | Front-Opening (L) or Top-Opening (LT) |
| Air Inlet | Adjustable on Door |
| Exhaust Port | Rear Wall-Mounted |
| Safety | Dual Overtemperature Protection per EN 60519-2 (Class 2 Thermal Protection), Cut-off Setpoint Configurable |
| Optional Accessories | Catalytic Exhaust System, Forced-Air Exhaust Fan, Gas Inlet Fitting for Inert/Reducing Atmospheres |
| Origin | Germany |
|---|---|
| Type | Box-type Muffle Furnace |
| Max. Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Heating Method | Embedded Resistance Wire in Ceramic Heating Panels |
| Internal Volume | 1–40 L |
| Power Rating | 1.2–6 kW |
| Ramp Time to Max Temp | ≤30 min |
| Construction | Double-walled Stainless Steel (V2A) Housing with Vacuum-Insulated Fiber Modules |
| Door Options | Flip-up or Lift-up Configuration |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Software Control | Compatible with Controltherm MV Process Management Suite |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100 °C or 1200 °C |
| Temperature Accuracy | ±1 °C |
| Max. Power | 6 kW |
| Heating Rate to Max. Temperature | ≤40 min |
| Heating Method | Dual-Side Ceramic Heating Plates (Triple-Side for L24/11–LT40/12 models) |
| Internal Volume | 1–40 L |
| Compliance | EN 60519-2, IEC 61000-6-3, CE Marked |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L15/11/B410 |
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.5 kW |
| Heating Time to Max. Temp. | 90 min |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 9 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wire) |
| Construction | Double-Walled Stainless Steel Housing (Brushed Finish), Ceramic Fiber Insulation, Safety-Grade Refractory Liner |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L15/11/C450 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Max Power | 3.5 kW |
| Heating Time to Max Temp | 90 min |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels) |
| Internal Dimensions (W×D×H) | 230 × 340 × 170 mm |
| Chamber Volume | 9 L |
| External Dimensions (W×D×H) | 415 × 555 × 515 mm |
| Weight | 40 kg |
| Phase | Single-Phase |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L3 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 1.2 kW |
| Heating Time to 1100 °C | 60 min |
| Internal Dimensions (W×D×H) | 160 × 140 × 100 mm |
| Chamber Volume | 3 L |
| External Dimensions (W×D×H) | 385 × 330 × 405 mm |
| Weight | 20 kg |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wires) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Controller | B410 Programmable 4-Stage Digital Controller with USB Data Logging (NTLog Basic Software) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L3/11/B170 |
| Temperature Range | Up to 1100 °C |
| Chamber Dimensions (W×D×H) | 160 × 140 × 100 mm |
| Chamber Volume | 3 L |
| External Dimensions (W×D×H) | 380 × 370 × 420 mm |
| Weight | 20 kg |
| Heating Rate | ≤60 min to 1100 °C |
| Heating Configuration | Dual-side heating |
| Thermocouple Type | NiCr–Ni (Type K) |
| Display | Blue LCD digital display |
| Power Supply | AC 220 V, 60 Hz, 1.2 kW |
| Enclosure | Double-layer stainless steel housing with embossed finish |
| Insulation | Vacuum-formed high-purity ceramic fiber board (asbestos-free) |
| Heating Element | Embedded in refractory plates |
| Door | Front-opening, fully articulating for use as sample handling platform |
| Safety Features | Automatic power cutoff upon door opening |
| Air Management | Adjustable internal air inlet + rear exhaust port |
| Optional Accessories | Exhaust fan or catalytic converter |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Power Rating | 2.4 kW |
| Heating Time to Max Temp | 60 min |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Plates with Embedded Resistance Wire) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Weight | 30 kg |
| Electrical Supply | Single-Phase |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/11/B180 |
| Max Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| External Dimensions (W×D×H) | 440 × 470 × 520 mm |
| Power Supply | 2.4 kW, Single-phase |
| Weight | 35 kg |
| Heating Time to Max Temp | ~60 min |
| Controller Type | B180 Programmable Digital Controller with Color Graphic Display |
| Programmable Steps | 2 per program (1 program memory) |
| Heating Method | Dual-sided ceramic heating plates with embedded resistance wire |
| Insulation | Vacuum-reinforced fiber modules |
| Construction | Double-walled stainless steel housing (brushed finish) |
| Door Options | Optional tilting door (standard for L5/11 series) or lifting door (LT variant) |
| Safety | EN 60519-2 Class 2 overtemperature protection limiter |
| Gas Inlet | Rear-mounted protective gas interface |
| Ventilation | Adjustable air inlet on door, exhaust outlet on rear wall |
| Optional Accessories | Exhaust chimney with fan or catalytic converter, kWh meter, programmable socket |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/11/P330 |
| Max Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| External Dimensions (W×D×H) | 440 × 470 × 520 mm |
| Power Supply | 1-phase, 2.4 kW |
| Weight | 35 kg |
| Heating Time to Max Temp | ≤60 min |
| Controller | P330 Programmable Touchscreen Controller (9 programs, 40 segments, graphical color display, 1 °C/1 min resolution, skip function, manual MV control, self-optimizing PID, clock, kWh meter, runtime counter, programmable socket, gas inlet port, exhaust port, adjustable air inlet) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/12/B180 |
| Max Operating Temperature | 1200 °C |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| External Dimensions (W×D×H) | 440 × 470 × 520 mm |
| Power Supply | 2.4 kW, Single-phase |
| Net Weight | 35 kg |
| Heating Time to Max Temp | ~75 min |
| Controller Type | B180 Programmable Digital Controller with Color Graphic Display |
| Door Configuration | Optional Tilting Door (Standard for L5/12) |
| Compliance | EN 60519-2 Class 2 Thermal Protection |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/12/P330 |
| Max Temperature | 1200 °C |
| Internal Dimensions (W×D×H) | 200 × 170 × 130 mm |
| Chamber Volume | 5 L |
| External Dimensions (W×D×H) | 440 × 470 × 520 mm |
| Power Supply | 1-phase, 2.4 kW |
| Net Weight | 35 kg |
| Heating Time to Max Temp | ~75 min |
| Controller | P330 Programmable Digital Controller (9 programs, 40 segments, color graphic display, 1 °C/1 min resolution, skip function, manual MV override, kWh counter, real-time clock, self-optimizing PID) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L5/13-LT 15/13 |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 2.4 kW |
| Heating Time to Max Temp | 45 min |
| Heating Method | Dual-Side Radiant Heating |
| Internal Dimensions (W×D×H) | 260 × 340 × 170 mm |
| External Dimensions (W×D×H) | 530 × 625 × 630 mm |
| Net Weight | 70 kg |
| Voltage Supply | Single-Phase 230 V |
| Safety Class | Thermal Protection Level 2 per EN 60519-2 |
| Gas Inlet Port | Rear Wall Mounted |
| Exhaust Port | Rear Wall Mounted |
| Optional Door Configuration | Top-Hinged (LT) or Front-Hinged (L) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L9 11 B410 |
| Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Rated Power | 3.0 kW |
| Heating Time to 1100 °C | 75 min |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber Volume | 9 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Panels with Embedded Resistance Wire) |
| Insulation | High-Density Ceramic Fiber |
| Housing | Double-Walled Stainless Steel (Brushed Finish) |
| Weight | 35 kg |
| Power Supply | Single-Phase |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L9 11 C450 |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±3 °C |
| Power Rating | 3.0 kW |
| Heating Time to Max Temp | 75 min |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber Volume | 9 L |
| Heating Method | Electric (Dual-Sided Ceramic Heating Plates with Embedded Resistance Wires) |
| Insulation | High-Density Ceramic Fiber |
| Outer Casing | Dual-Layer Brushed Stainless Steel |
| Weight | 35 kg |
| Electrical Supply | Single-Phase |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | LE 14/11/R7 |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2.9 kW |
| Heating Time to Max Temperature | 40 min |
| Heating Method | Resistance Wire (Encapsulated in Quartz Tubes) |
| Internal Dimensions | 220 × 300 × 220 mm (W × D × H) |
| External Dimensions | 440 × 535 × 540 mm (W × D × H) |
| Net Weight | 40 kg |
| Electrical Supply | Single-phase, 230 V, 50/60 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | LE1/11–LE14/11 |
| Max Temperature | 1100 °C |
| Operating Temperature | 1050 °C |
| Heating Configuration | Dual-sided, heating elements embedded in quartz tubes |
| Insulation | Multi-layer ceramic fiber board |
| Enclosure | Double-walled brushed stainless steel |
| Door Type | Front-opening |
| Exhaust Port | Rear wall-mounted |
| Overtemperature Protection | EN 60519-2 compliant, Class 2 thermal protection with adjustable cutoff temperature |
| Gas Inlet | Rear-mounted manual gas connection |
| Control System | Controltherm MV software-enabled process control and data logging |
| Power Supply | Single-phase |
| Weight | 10–40 kg (model-dependent) |
| Dimensions & Volume | Model-specific (e.g., LE1/11: 90×115×110 mm internal, 1290×280×430 mm external, 1.5 L volume, 1.5 kW) |