Constant Temp/Heating/Drying Equipment
Filter
Showing 2101–2130 of 3291 results
| Brand | MICHEM |
|---|---|
| Model | TS Series |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Time to Max Temp | ≤30 min |
| Heating Method | Electric (HRE Alloy Elements) |
| Internal Chamber Dimensions | 200 × 300 × 150 mm |
| Chamber Volume | 9 L |
| Touchscreen | 5″ TFT LCD (800 × 480), with USB & Ethernet interfaces |
| Data Storage | 150 MB |
| PID Control | AI-PID with auto-tuning |
| Programmable Steps | 30 segments |
| Safety | Automatic power cutoff upon door opening |
| Insulation | Polycrystalline alumina fiber (vacuum-pressed, low thermal conductivity) |
| Weight | 85 kg |
| Brand | MILESTONE |
|---|---|
| Origin | Italy |
| Model | PYRO SA |
| Instrument Type | Crucible Furnace |
| Max Temperature | 1200 °C |
| Temperature Control | PID-based dual-stage thermocouple system with DKD-traceable calibration |
| Max Power | 1200 W |
| Time to Max Temperature | ≤20 min |
| Heating Elements | Resistance wire, SiC rods, MoSi₂ rods |
| Internal Chamber Dimensions | 480 mm (W) × 550 mm (D) × 560 mm (H) |
| Acid Management System | Quartz-lined chamber, quartz condenser, PTFE/PFA acid traps, NaOH neutralization stage, corrosion-resistant PTFE vacuum pump (20 mbar, 40 L/min) |
| Airflow Design | Perforated honeycomb alumina ceramic wall for continuous oxidative airflow over crucibles |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | 101-1A |
| Instrument Type | General-Purpose Forced-Air Oven |
| Temperature Range | 10–250 °C |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±1 °C |
| Temperature Resolution | ±1 °C |
| Control Range | 50–300 °C |
| External Dimensions | 760 × 530 × 670 mm |
| Interior Chamber Dimensions | 450 × 450 × 350 mm |
| Chamber Material | Galvanized Steel with Heat-Resistant Coating |
| Heating Method | Forced-Air Circulation |
| Operating Ambient Temperature | 0–55 °C |
| Power Supply | 220 V, 50 Hz |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | DMF300 |
| Temperature Range | Ambient to 1000 °C |
| Temperature Accuracy | ±1 °C |
| Temperature Resolution | 1 °C |
| Max. Power | 3.5 kW |
| Supply Voltage | 220 V ±10%, 50/60 Hz |
| Dimensions (W×D×H) | 550×550×550 mm |
| Net Weight | 30 kg |
| Safety Protections | Thermocouple fault detection (open/short/reversed), over-temperature cutoff, automatic heating circuit disconnection |
| Compliance | GB/T 212–2008 |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | JXL-620 |
| Type | Box-type Muffle Furnace |
| Max Temperature | 1000 °C |
| Temperature Control Accuracy | ±5 °C |
| Max Power | 3.5 kW |
| Heating Rate to Max Temp | ≤20 min |
| Heating Method | Resistance Wire (Ni-Cr Alloy) |
| Internal Chamber Dimensions | 300 × 200 × 120 mm |
| Thermal Sensor | K-type Thermocouple (NiCr-NiSi) |
| Control System | Microprocessor-based with 20-Stage Programmable Ramp/Soak Profile |
| Display | Chinese LCD with Touch Keypad |
| Insulation Material | Polycrystalline Ceramic Fiber |
| Voltage | 220 V ±10% |
| Net Weight | 55 kg |
| External Dimensions | 680 × 600 × 670 mm (L×W×H) |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | KH-3 |
| Temperature Control Range | 100–1000 °C |
| Temperature Measurement Accuracy | Class 0.2 |
| Temperature Control Stability | ±10 °C |
| Furnace Length | 700 mm |
| Isothermal Zone Length | ≥200 mm |
| Conveyor Speed | 15–70 mm/min |
| Isothermal Uniformity at 815 °C | ±10 °C over ≥150 mm |
| Heating Time (RT → 815 °C) | ≤45 min |
| Rated Power | 3 kW |
| Supply Voltage | 220 V ± 22 V, 50 Hz ± 1 Hz |
| Dimensions (L×W×H) | 1200 × 420 × 505 mm |
| Net Weight | 70 kg |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Model | SRJX-4-13 |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1350 °C |
| Operating Temperature | ≤1300 °C |
| Control Accuracy | ±5 °C |
| Max Power | 5 kW |
| Heating Rate | 1300 °C in ≤120 min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 250 × 150 × 100 mm |
| External Dimensions | 630 × 530 × 510 mm |
| Net Weight | 130 kg |
| Input Voltage | AC 220 V, 50 Hz |
| Thermocouple Compatibility | Type S (Pt–Rh/Pt, 0–1600 °C) |
| Controller | SWK-S Digital PID Temperature Controller with 0–220 V Phase-Angle Controlled Output |
| Load Capacity | 5 kW |
| Display Accuracy | Class 0.5 |
| Brand | MingShen Science |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | XL-1 |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1000 °C |
| Temperature Control Accuracy | ±5 °C |
| Rated Power | 4 kW |
| Heating Time to Max Temp | 90 min |
| Heating Element | Nickel-Chromium Resistance Wire |
| Internal Chamber Dimensions | 325 × 200 × 125 mm (L × W × H) |
| Control Method | Analog On/Off or PID Controller (External) |
| Insulation Material | Lightweight Refractory Insulating Brick |
| Chimney Port | Adjustable Rear-Mounted Flue |
| Viewing Port | Centered on Door |
| Door Mechanism | Counterweighted Hinged Lid |
| Thermal Sensor Interface | Standard Thermocouple Insertion Port (Type K recommended) |
| Origin | Henan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | M1210 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1200°C |
| Control Accuracy | ±1°C |
| Rated Power | 1 kW (Typical Operating Power ≤ 800 W) |
| Heating Rate (to Max Temp) | 10°C/min (Standard), up to 30°C/min (Max) |
| Heating Zone | Single-Zone |
| Internal Chamber Dimensions | 100 mm × 100 mm × 100 mm |
| Chamber Volume | 1 L |
| Heating Element | Mo-doped Fe-Cr-Al Alloy (OCr27Al7Mo2), Triple-Sided Integrated Casting |
| Insulation Material | High-Purity Alumina Fiber |
| Thermocouple Type | K-Type |
| Control System | Intelligent PID with 30-Step Programmable Ramp-Soak Profile |
| Display | High-Brightness LED Digital Interface |
| Door Configuration | Side-Opening |
| Surface Temperature (at 1200°C) | <50°C |
| External Dimensions | 250 mm × 280 mm × 380 mm |
| Input Voltage/Frequency | 220 V AC, 50 Hz |
| Safety Features | Over-Temperature Alarm, Current Overload Protection, Thermocouple Break Detection |
| Warranty | 12-Month Limited Warranty, Lifetime Technical Support |
| Brand | MITR |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | Plastic Floating Rack |
| Price Range | USD 0.15–7.50 |
| Brand | MKN |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | KDM-A (Quadruple) |
| Pricing | Available Upon Request |
| Power Supply | 220 V, 50 Hz |
| Temperature Range | Ambient to 300 °C |
| Control Accuracy | ±1 °C |
| Vessel Capacity Options | 250 mL × 4 |
| Heating Power | 200 W × 4 |
| Display | LED Digital |
| Insulation Material | High-Efficiency Thermal Insulation Matrix |
| Brand | Makewave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MKP-T2HA |
| Microwave Power | 0–1600 W, 2450 MHz, continuously adjustable |
| Cavity Material | Vacuum-sealed, one-piece welded stainless steel, ultimate vacuum: –0.099 MPa |
| Plasma Reactor | Horizontal quartz tube, plasma generation zone: 40 × 400 mm |
| Observation Port | Single integrated viewport for real-time plasma monitoring |
| Gas System | Dual-channel sealed gas mixing inlet (left side), right-side exhaust, fully vacuum-compatible |
| Temperature Range | Up to 1700 °C, infrared pyrometric control |
| Control System | PLC-based intelligent control with color TFT touchscreen HMI |
| Data Management | Multi-step recipe storage, time–temperature profile logging, real-time curve display, USB data export |
| Dimensions (W×D×H) | 1500 × 800 × 800 mm, benchtop configuration |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments |
| Brand | Makewave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic Equipment |
| Model | MKP-T4UA |
| Pricing | Upon Request |
| Microwave Power | 0–3200 W, 2450 MHz, Continuously Adjustable |
| Cavity Material | Seamless Stainless Steel Welded Construction, Vacuum-Sealed, Ultimate Vacuum: −0.099 MPa |
| Plasma Reactor | Horizontal Quartz Tube, Plasma Generation Zone: Φ300 × 400 mm |
| Temperature Range | Up to 1700 °C |
| Temperature Measurement | Infrared Pyrometry |
| Control System | PLC-Based Intelligent Control with Color Touchscreen HMI |
| Atmosphere Control | 4 Gas Inlets + 2 Mist Injection Ports |
| Motion System | Integrated Rotational Motor for Sample Holder |
| Viewing Port | Single Optical Window with Dual-Mode LED Monitoring (Pre-ignition Observation & Real-Time Plasma Emission Visualization) |
| Safety Feature | Microwave Leakage Monitoring Port |
| Dimensions (W×D×H) | 1200 × 1000 × 1900 mm |
| Installation | Floor-Standing Configuration |
| Data Management | Multi-Program Storage, Multi-Stage Thermal Profiles, Real-Time Time–Temperature Curve Display, USB Data Export |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Capacity Options | 55 L, 111 L, 222 L |
| Temperature Range | Ambient +5 °C to 125 °C |
| Controller | Microprocessor-based PID with LED Display |
| Timer | 0–99:59 h |
| Optional Accessories | PT-100 Mobile Probe, Door Lock, HEPA-grade Air Filter, Side Port for Cabling |
| Communication Interface | RS232 Serial Port |
| Interior Coating | Epolon® Anti-Corrosive Polymer Coating (Applied to Chamber Walls & Shelves) |
| Interior Material | Full Stainless Steel (AISI 304) |
| Compliance | Designed for ISO/IEC 17025-compliant laboratories |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Oven Type | High-Temperature Laboratory Drying Oven |
| Volume Range | 22 L – 707 L |
| Temperature Range | 10 °C to 300 °C |
| Temperature Uniformity | ±0.5 °C (Venticell, at 160 °C, per DIN 12880) |
| Temperature Stability | ±0.3 °C (Ecocell, typical at setpoint) |
| Interior Material | AISI 304 Stainless Steel |
| Heating Method | Electric Resistance Heating |
| Air Circulation | Natural Convection (Ecocell) or Adjustable Forced-Air (Venticell) |
| Safety Class | Protection Class III (IEC 61010-1) |
| Interface | RS232 (standard), optional RS485/Ethernet |
| Certifications | CE, TÜV GS, ISO 9001, ISO 14001, compliant with IEC 61010-1, EN 61326-1, FDA 21 CFR Part 11 (with optional audit trail software) |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Capacity Range | 55 L to 707 L |
| Instrument Type | High-Temperature Dry Heat Oven |
| Temperature Range | Ambient +10 °C to 250 °C |
| Safety Interlocks | Door-open & exhaust-airflow failure detection with automatic cycle abort and audible/visual alarm |
| Optional Accessories | Ergonomic touchscreen control panel, stainless-steel wire shelves, left-hinged door configuration, mechanical door lock, removable PT-100 probe (Class A), HEPA-filtered air intake, thermal printer interface, side-wall process ports |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Capacity Options | 22 L, 55 L, 111 L |
| Instrument Type | Vacuum Oven |
| Temperature Range | +5 °C to 300 °C |
| Vacuum Performance | Down to 2 mbar (with optional chemical-resistant diaphragm pump + soundproof enclosure) |
| Control System | Microprocessor-based PID fuzzy logic controller with LED display |
| Safety Class | EU Class 3.1a per EN 61010-1 (TENTIFLEX safety valve) |
| Compliance | Designed in accordance with DIN 40050 IP20 |
| Interface | RS232 port for PC connectivity, data logging, and printer output |
| Optional Accessories | Stainless steel or aluminum trays, digital vacuum gauge & control module, movable PT-100 probe, soundproof enclosure, thermal printer, programmable comfort panel with microSD card slot for unlimited program storage |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | Venticell 22, 55, 111, 222, 404, 707L |
| Temperature Range | 10 °C to 300 °C |
| Temperature Uniformity | Standard (per IEC 60068-3-5) |
| Chamber Material | AISI 304 Stainless Steel |
| Heating Method | Electric Resistance Heating |
| Compliance | CE, TÜV, ISO 9001, IEC 61010-1, BS EN 61010-1 |
| Regulatory Alignment | USP <1211>, EP 2.6.12, FDA 21 CFR Part 11 (software-enabled variants), cGMP Annex 15, ICH Q5C |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 601956 / 597569 |
| Pricing | Upon Request |
| Display | 3.5-digit, 12.7 mm (601956) / 18 mm (597569) high LED |
| Input Socket | Miniature T-type quick-disconnect (copper-constantan) |
| Power Supply | 4 × C-cell batteries (included) |
| Battery Life | 1200–2000 hours |
| Accuracy | ±0.1 °C ±1 digit |
| Resolution | 0.1 °C / 0.1 °F |
| Temp Range (601956) | 25–45 °C only |
| Temp Range (597569) | −10 to +60 °C (14–140 °F) |
| Output | Analog voltage output (connector not included) |
| Compliance | NIST-traceable calibration |
| Brand | MTI Corporation (formerly Hefei Kejing) |
|---|---|
| Origin | Anhui, China |
| Model | MSK-HRP-01 |
| Maximum Operating Temperature | 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Power | 550 W AC |
| Ramp Rate to Max Temperature | 1.3 °C/min |
| Internal Roller Width | 100 mm |
| Roller Diameter | Φ96 mm |
| Adjustable Gap Resolution | 0.01 mm |
| Roller Surface Hardness | >900 HV |
| Roller Runout | ≤0.004 mm |
| Surface Roughness | Ra ≤0.4 µm |
| Max Feed Thickness | 2 mm |
| Max Feed Width | 90 mm |
| Linear Roller Speed | 5–35 mm/s (digital display & stepless speed control) |
| Motor | DC 90 V, 40 W |
| Input Voltage | AC 220 V |
| Warranty | 12 months |
| Origin | Sichuan, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | Multi-purpose Drying Oven |
| Pricing | Available Upon Request |
| Origin | China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | DGT2006(B), DGT202(B), DGT302(B) |
| External Dimensions (D×W×H) | 107×130×128 cm / 144×207×190 cm / 148×211×194 cm |
| Chamber Dimensions (D×W×H) | 80×80×100 cm / 110×150×160 cm |
| Chamber Volume | 640 L / 2640 L |
| Temperature Range | Ambient +20 °C to 200 °C |
| Temperature Uniformity | ±2.5% of setpoint |
| Temperature Fluctuation | ±0.5 °C |
| Heating Power | 5.5 kW / 17.5 kW |
| Construction | Stainless Steel Interior (B-series), Epoxy-Coated Mild Steel Exterior |
| Control System | PID Digital Temperature Controller with LED Display |
| Air Circulation | Forced Convection via Rear-Mounted Horizontal Fan |
| Safety Features | Independent Over-Temperature Cut-Off, Short-Circuit Protection, Pressure-Relief Safety Door |
| Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 631000166 |
| Category | Muffle Furnace Accessory |
| Application | Catalytic Exhaust Afterburning |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Product Type | Imported Accessory |
| Compatible Models | L, LT, LE, LV, LVT Series |
| Part Numbers | 691601099 (LE 2), 691600510 (L3/LT3/LV3/LVT3), 691600511 (LE4/LE6/L5/LT5/LV5/LVT5), 691600512 (L9/LT9/LV9/LVT9) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | R Series |
| Max Operating Temperature | 1200 °C or 1300 °C |
| Tube ID | 50–120 mm |
| Heating Zone Length | 250–1000 mm |
| External Dimensions (W×D×H) | up to 1300 mm × 1170 mm × 460 mm |
| Power Supply | 1-phase (1.6–2.3 kW) or 3-phase (6.5–11.5 kW) |
| Weight | 22–89 kg |
| Control System | HiProSystem (3-zone for models ≥750 mm heating length, 1300 °C), integrated S-type thermocouple, overtemperature protection per EN 60519-2 Class 2 |
| Atmosphere Options | inert gas, vacuum-compatible configurations available |
| Software Integration | Controltherm MV for process monitoring, logging, and compliance-ready data management |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Product Type | Replacement Hearth & Collection Tray Set |
| Compatible Models | L, LT, LE, LV, LVT Series Muffle Furnaces |
| Part Numbers | 691601097, 691600507, 691600508, 691600509, 691601098, 691600506, 691600874, 691600875 |
| Material | High-Purity Alumina-Based Ceramic (Al₂O₃ ≥ 92%) |
| Thermal Stability | Up to 1300 °C Continuous |
| Surface Texture | Precision-Engineered Corrugated Profile |
| Thickness | 12 mm ±0.3 mm |
| Dimensional Tolerance | ±0.5 mm per 100 mm |
| Compliance | ISO 9001 Certified Manufacturing |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 631000141 |
| Compatibility | Designed for Nabertherm muffle furnaces with P330 controller interface |
| Function | Active exhaust ventilation system for controlled off-gas removal |
| Construction | High-temperature resistant stainless steel housing with IP54-rated fan assembly |
| Operating Temperature Range | Up to 1200 °C (chimney body) |
| Electrical Supply | 230 V AC, 50/60 Hz, 0.18 A |
| Fan Speed Control | Analog 0–10 V signal from P330 controller |
| Airflow Capacity | 120 m³/h at 150 Pa static pressure |
| Noise Level | ≤58 dB(A) at 1 m distance |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 491041101 |
| Max Operating Temperature | 900 °C |
| Material | High-performance aluminosilicate fiber composite with reinforced stitching and ergonomic leather palm overlay |
| Compliance | EN 407:2020 (Type A1, A2, A3, A4, A5, B1, C1, E1, F1) |
| Intended Use | Manual handling of hot crucibles, trays, and furnace inserts in laboratory and industrial muffle furnace environments |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 493000004 |
| Max Operating Temperature | 650 °C |
| Compliance | EN 407:2020 (Type A1, A2, A3, A4, A5, B1, C1, E1, F1) |
| Material | Aluminized Fiberglass with Insulating Liner |
| Length | 350 mm |
| Certification | CE Marked, EU Declaration of Conformity Available |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model Range | HFL16/16 – HFL160/17 |
| Max Temperature | 1600 °C or 1700 °C |
| Chamber Volume | 16–160 L |
| Heating Element | Molybdenum Disilicide (MoSi₂) |
| Insulation | Lightweight Refractory Brick with Rear Thermal Barrier |
| Thermocouple Type | Type B |
| Overtemperature Protection | Integrated Limit Controller |
| Exhaust Port | 30 mm Ø at Top Lid |
| Power Supply | 3-phase, 12–21 kW |
| Weight | 500–1190 kg |
| Compliance | CE, EN 61000-6-3, EN 61000-6-4, IEC 61000-4-2 |