Coordinate Measuring Machine
Filter
Showing 31–60 of 75 results
| Brand | Hexagon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RA8-6 |
| Price Range | USD 42,000 – 70,000 |
| Configuration | Articulated Arm CMM |
| Operation Mode | Motorized/Automatic |
| Portability | Portable |
| Measurement Principle | Contact-Based Tactile Probing |
| Measurement Volume | 1.49 m – 4.73 m (spherical envelope) |
| Volumetric Accuracy | ±0.04 mm (as per ISO 10360-12) |
| Maximum Point Capture Rate | 45,000 pts/sec |
| Operating Temperature Range | Up to +45 °C |
| IP Rating | IP54 |
| Compliance | ISO 10360-12 certified |
| Integrated Options | Optional WiFi module, rechargeable battery pack, SFx Asset Management compatibility |
| Probe Interface | Quick-swap tactile probe mount with hot-swap capability and zero recalibration requirement |
| Brand | Hexagon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | RA8-7 |
| Pricing | Available Upon Request |
| Configuration | Articulated Arm CMM |
| Operation Mode | Motor-Assisted / Semi-Automatic |
| Form Factor | Portable |
| Measurement Volume | Not Specified |
| Volumetric Accuracy | Not Specified |
| Standard Ambient Temperature | Not Specified |
| Brand | Hexagon |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Apollo |
| Price Range | USD 270,000 – 540,000 (est.) |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical CMM |
| Measurement Volume | 2000 mm × 3300 mm × 1000 mm to 2500 mm × 5000 mm × 2000 mm |
| Volumetric Accuracy | (4.0 + 4.0L/1000) µm (L in mm) |
| Standard Accuracy Level | E₀ starting from 4 µm |
| Brand | Hexagon |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | Croma Classic |
| Pricing | Available Upon Request |
| Brand | Hexagon |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | CROMA PLUS |
| Pricing | Upon Request |
| Brand | Hexagon Metrology |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | Croma Plus Series |
| Pricing | Available Upon Request |
| Brand | Hexagon |
|---|---|
| Origin | Italy |
| Model | DELTA SLANT |
| Configuration | Gantry (Vertical) |
| Operation | Automatic |
| Structural Type | Bridge-style gantry |
| Measurement Volume | ≥2500 × 3300 × 2000 mm |
| Volumetric Accuracy | Starting from 3.5 μm |
| Core Technology | Dual-encoder Y-axis bridge, SiC Z-axis (Performance variant), Certified high-resolution optical encoder system, 26-parameter geometric error compensation |
| Environmental Tolerance | Shop-floor capable (16–26 °C) with optional Shop Floor Kit |
| Compliance | ISO 10360-2, ISO 15530-3, VDI/VDE 2617, ASME B89.4.1 |
| Brand | Hexagon |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Bridge-Type CMM |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical |
| Measurement Method | Hybrid Contact & Non-Contact |
| Measurement Volume Range | 500 × 700 × 500 mm to 1200 × 3000 × 1000 mm |
| Volumetric Accuracy | Starting from 2.2 µm |
| Standard Environmental Temperature | 20 °C |
| Application Sectors | Medical Devices, Mechanical Equipment, Automotive Manufacturing, Aerospace, Electronics |
| Brand | Hexagon Metrology |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GLOBAL PLUS |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Orientation | Horizontal |
| Measurement Method | Hybrid Contact & Non-Contact (Trigger/Scanning Probes + Line Laser / Confocal White Light Sensors) |
| Measurement Volume Range | 600 × 800 × 600 mm to 1000 × 2100 × 800 mm |
| Volumetric Accuracy | Starting from 1.7 μm |
| Compliance | DIN 876 (granite table flatness), PTB-certified low-expansion linear encoders |
| Supported Industries | Automotive, Aerospace, Precision Machining, Electronics, Mold & Die Manufacturing |
| Brand | Hexagon Metrology |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GLORY |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Horizontal |
| Measurement Method | Hybrid Contact & Non-Contact |
| Measurement Volume Range | 400 × 500 × 400 mm to 1500 × 3000 × 1200 mm |
| Volumetric Accuracy | Starting from 1.6 µm |
| Maximum Traverse Speed | 520 mm/s |
| Standard Operating Temperature | 18–22 °C |
| Minimum Air Supply Pressure | 0.6 MPa |
| Application Sectors | Mechanical Manufacturing, Automotive, Aerospace, Electronics, Mold & Die Production |
| Brand | Hexagon Metrology |
|---|---|
| Origin | Shandong, China |
| Model | TORO HP |
| Configuration | Cantilever |
| Operation Mode | Automatic |
| Machine Type | Vertical |
| Measurement Method | Contact & Non-Contact Hybrid |
| Measurement Volume Range | 4000 × 1600 × 2100 mm to 7000 × 1600 × 3000 mm |
| Volumetric Accuracy | Starting from 16 µm |
| Standard Operating Temperature | 16–24 °C |
| Primary Application | Automotive Body-in-White (BIW) and Sheet Metal Assembly Inspection |
| Brand | Hexagon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | X-METRO |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automated |
| Orientation | Vertical |
| Measurement Method | Hybrid Contact & Non-Contact |
| Measuring Volume Range | 600 × 800 × 600 mm to 1000 × 2010 × 900 mm |
| Volumetric Accuracy | Starting from 1.9 µm |
| Maximum Probe Speed | 520 mm/s |
| Standard Operating Temperature | 18–22 °C |
| Minimum Air Supply Pressure | 0.6 MPa |
| Application Sectors | Mechanical Manufacturing, Automotive, Aerospace, Electronics, Mold & Die Making |
| Software Platform | PC-DMIS PREMIUM |
| Brand | Hexagon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RA8-Compact |
| Price Range | USD 28,000 – 57,000 |
| Category | Articulated Arm CMM |
| Operation Mode | Manual |
| Form Factor | Portable |
| Max Operating Temperature | 45 °C |
| IP Rating | IP54 |
| Compliance | ISO 10360-2, ISO 10360-12 |
| Encoder Type | Integrated Absolute Encoders |
| Power Supply | Rechargeable Battery |
| Communication | Wi-Fi & Bluetooth |
| Arm Construction | Carbon Fiber |
| Base | Integrated Quick-Deploy Base |
| Optional Functionality | Contact Probe + Entry-Level Laser Scanner |
| Brand | Hexagon |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | XPERT |
| Configuration | Bridge-Type |
| Operation Mode | Automatic |
| Instrument Orientation | Vertical |
| Measurement Method | Contact & Non-Contact Hybrid |
| Measurement Volume | 600 × 500 × 500 mm to 600 × 800 × 600 mm |
| Volumetric Accuracy | Starting from 0.5 µm |
| Standard Ambient Temperature | 19–21 °C |
| Minimum Air Supply Pressure | 0.6 MPa |
| Application Sectors | Mechanical Manufacturing, Automotive, Aerospace, Mold & Die, Electronics, Medical Devices |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Manufacturer | KEYENCE Corporation |
| Product Type | Imported Composite CMM |
| Model | WM-3500 |
| Operation Mode | Manual |
| Form Factor | Portable |
| Measurement Volume | 15 m (diameter) |
| Accuracy | ±(28 + 5L/1000) µm (where L = measured length in mm) |
| Standard Operating Temperature | 10–35 °C |
| Compliance | Designed for ISO 10360-2 and VDI/VDE 2617-1 compliant verification |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | WM-P3000 |
| Configuration | Articulated Arm CMM |
| Operation Mode | Manual |
| Form Factor | Portable |
| Measurement Volume (X×Y×Z) | 3050 × 1800 × 274 mm (10 m effective working envelope) |
| Accuracy | ±0.028 mm (ISO 10360-2 compliant) |
| Standard Operating Temperature Range | 10–35 °C |
| Compliance | ISO 10360, JIS B 7440, VDI/VDE 2617 Part 2 |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | WM-S3000 |
| Configuration | Hybrid CMM |
| Operation Mode | Manual |
| Instrument Type | Portable |
| Measurement Range | 10 m (spherical envelope) |
| Measurement Accuracy | ±0.028 mm (ISO 10360-2 compliant) |
| Standard Operating Temperature | 10–35 °C |
| Brand | LEI-TECH |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | LK-SZB564 |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Tactile Probing |
| Measurement Volume (X×Y×Z) | 500 mm × 600 mm × 400 mm |
| Volumetric Accuracy | E ≤ (2.8 + L/300) µm |
| Probe System | YF1 + RA20 + RA13 (TELES), with Standard Force Module and M2 Interface |
| Probe Tip Mass | 22 g |
| Length Measurement System | Reflective Metallic Tape Encoder Scale |
| Maximum Permissible Temperature Deviation | ±1 °C (Standard Environment: 18–22 °C) |
| Relative Humidity Range | 40–70 % RH |
| Power Supply | 220 V ±10 %, 50–60 Hz |
| Minimum Air Supply Pressure | ≥0.55 MPa |
| Maximum Workpiece Load | 100 kg |
| Structural Material | Granite (All Three Axes) |
| Y-Axis Guideway | P-Class Precision Linear Rail |
| Drive System | High-Performance DC Servo Motor with Timing Belt Transmission |
| Control Architecture | Dual-Computer Embedded CMM Controller |
| Software Platform | MSU3D PRO v5.x (Proprietary 3D Metrology Suite) |
| Brand | Leitz |
|---|---|
| Origin | Germany |
| Configuration | Bridge-Type |
| Operation Mode | Automatic |
| Orientation | Vertical |
| Measurement Method | Combined Contact and Non-Contact |
| Software Platform | QUINDOS & PC-DMIS |
| Structural Design | Floor-Standing, No Foundation Required |
| Environmental Tolerance | Ambient Workshop Installation (No Air-Conditioned Room Required) |
| Integration Capability | CAQ Network Compatible |
| Probe System | Leitz LSP Series (Max. Probe Length: 800 mm, Max. Probe Mass: 1000 g) |
| Dynamic Performance | Up to 660 mm/s Scanning Speed, Up to 3250 mm/s² Acceleration |
| Repeatability | Sub-micron Level Across Full Volume |
| Compliance Context | Designed for ISO 10360-2, ISO 15530-3, VDI/VDE 2617, and GLP/GMP-aligned QA workflows |
| Brand | Leitz |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | PMM-G |
| Configuration | Bridge-Type |
| Operation Mode | Fully Automatic |
| Instrument Orientation | Vertical |
| Measurement Principle | Contact-Based Metrology with Multi-Sensor Integration |
| Maximum Travel Range | 7000 × 4000 × 3000 mm |
| Standard Temperature Range | 18–22 °C |
| Z-Axis Material | Ceramic |
| Guideway Material | Granite |
| Bearing System | Air Bearings with Electronic Gap Monitoring |
| Positioning Resolution | 0.005 µm |
| Vibration Isolation | Active Damping System |
| Thermal Compensation | Integrated Environmental Sensor Network |
| Safety Systems | Dual Laser Scanners + Collision Avoidance Logic |
| Compliance Framework | ISO 10360-2, ISO 15530-3, VDI/VDE 2617, ASTM E1352, GLP/GMP-Ready Data Audit Trail |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | MC003-ML Series |
| Pricing | Available Upon Request |
| Measurement Range (X×Y×Z) | 1000×2000×1000 mm to 1500×3500×1200 mm |
| MPE (E₀) | 3.0 + L/250 µm to 4.2 + L/200 µm |
| Probe Error (PFTU) | 3.8–5.0 µm |
| Structural Design | Single-Side High-Frame Moving Bridge |
| Guide Material | Granite (all three axes) |
| Bearing Type | Self-Cleaning Preloaded Air Bearings |
| Drive System | Imported DC Servo Motors & Friction Rod Transmission |
| Z-Axis Counterbalance | Pneumatic Cylinder Balancing |
| Control System | German SB High-Integration CNC Controller |
| Software | AC-DMIS Metrology Suite (Proprietary, ISO 10360-2 Compliant) |
| Brand | PMT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | GAMMA 6-Axis |
| Configuration | Articulated Arm CMM |
| Operation Mode | Manual |
| Portability | Portable |
| Measurement Principle | Contact-Based Tactile Metrology |
| Measurement Volume | 1.5–4.5 m (customizable) |
| Accuracy | ±0.012 mm (ISO 10360-2 compliant at 20 °C) |
| Standard Operating Temperature | 5–45 °C |
| Relative Humidity | 0–95 % RH (non-condensing) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Battery Life | ≥16 h (single battery, tactile probing), ≥32 h (dual battery) |
| Weight | 8.8–10.6 kg |
| Material | Aerospace-Grade Carbon Fiber Structural Members |
| Balance System | Patented External Decoupling Internal Counterbalance Mechanism |
| Environmental Compensation | Real-time thermal drift compensation (±3 °C / 5 min) |
| Connectivity | Dual-mode — USB 3.2 Gen 1 (high-reliability wired data transfer) and Custom 5 GHz Wi-Fi Module (low-latency wireless telemetry) |
| Software Interface | Standardized SDK & API for third-party metrology software integration (e.g., PolyWorks, Geomagic Control, PC-DMIS) |
| Compliance | Designed to support ISO 9001, AS9100, and GLP/GMP-aligned audit trails when paired with validated software environments |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | PH10 |
| Interface Compatibility | AutoJoint (PH10M/MQ) or M8 threaded (PH10T) |
| Maximum Probe Extension | 300 mm |
| Compatible with | ACR3 automatic probe changer, SP25M 3-axis scanning probe (2000 points/sec, 100 mm/s scan speed), TP20/TP200 touch-trigger probes |
| Regulatory Compliance | Designed for integration into ISO/IEC 17025-accredited CMM environments |
| Software Integration | Native support for PC-DMIS, QUINDOS, and MODUS metrology software suites |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | PH20 |
| Type | Motorized 5-Axis Touch-Trigger Probe Head |
| Power Requirement | None (Passive, No Air Supply Required) |
| Compatibility | Retrofitable to Existing CMMs with TP20-style Interface |
| Calibration Method | Inferred Calibration (Single-Point Vector Determination) |
| Mounting Options | Direct Spindle Mount or Via Adaptor Kits (e.g., ISO 40/50, HSK, CAT) |
| Software Integration | Native Support in MODUS, PC-DMIS, QUINDOS, and OpenDMIS |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PH20 |
| Pricing | Available Upon Request |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | REVO™ |
| Pricing | Upon Request |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | RTP20 |
| Probe Type | Integrated TP20 Touch Trigger Probe |
| Indexing Increment | 15° |
| Compatibility | Fully Supported by Standard CMM Controllers (e.g., Renishaw UCC Series) |
| Module Exchange | Compatible with MCR20 Automatic Module Changer Rack |
| Actuation Method | CMM-Motion-Driven Mechanical Engagement (No Internal Motor or Encoder) |
| Classification | Precision Geometric Measurement Instrument — Coordinate Measuring Machine (CMM) Peripheral |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | SP25M |
| Probe Type | Dual-mode (scanning + touch-trigger) |
| Sensor Integration | Integrated capacitive scanning sensor + mechanical trigger sensor |
| Compatible Shank Lengths | 20 mm to 400 mm |
| CMM Interface | Standard M3, M4, or HSK shank options (per OEM integration) |
| Operating Principle | Capacitive displacement sensing (scanning mode) |
| Brand | Renishaw |
|---|---|
| Origin | United Kingdom |
| Model | TP200 |
| Probe Type | Modular Trigger (Kinematic) Probe for CMMs |
| Sensor Technology | Micro-strain Gauge |
| Repeatability | < 0.5 µm (3σ, under controlled conditions) |
| Overtravel Force Options | Standard Force (SF) or Low Force (LF) |
| Interface | PI 200 (Proprietary Renishaw CMM Interface) |
| Toolchanging Compatibility | SCR200 Automatic Probe Change Rack |
| Electronics | ASIC-based Signal Conditioning and Debounce Circuitry |
| Operating Life | > 10⁶ triggers (typical, per module) |