Environmental Test Chamber
Filter
Showing 3361–3390 of 3643 results
| Brand | GBPI |
|---|---|
| Model | BJ-BDG859 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Price | USD 17,800 (FOB Guangdong) |
| Brand | OEM / Custom-Branded |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (Reference Only |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,150 (FOB) |
| Internal Chamber Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Range | ≥95% RH |
| Temperature Control Accuracy | ≤±0.5 °C |
| Temperature Uniformity | ≤±2 °C or ≤±3% |
| UV Lamp Type | Fluorescent UV Tubes (UVA-340 or UVB-313 equivalent) |
| UV Wavelength Range | 280–400 nm |
| Lamp Lifetime | Approx. 2,000 hours |
| Exposure Time Setting | 0–999 h (adjustable) |
| Construction Material | Interior & Exterior – SUS#304 Stainless Steel |
| Heating System | U-shaped Titanium Alloy Heaters |
| Safety Features | Interlocked UV cutoff on door opening, Overtemperature Protection, Low-Water Level Cutoff |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz |
| Key Features | UV Lamp Wavelength Range: 280–400 nm |
|---|---|
| Internal Chamber Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Temperature Control Accuracy | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±2 °C or ≤ ±3% |
| Humidity During Condensation Cycle | ≥95% RH |
| UV Exposure Time Programmable | 0–999 h |
| Lamp Type | Fluorescent UV Tubes (Avg. Service Life: ~2000 h) |
| Construction Material | SUS#304 Stainless Steel (Interior & Exterior) |
| Heating System | U-shaped Titanium Alloy Fast-Response Heaters |
| Safety Protections | Interlocked UV Shut-off on Door Opening, Over-Temperature Protection, Low-Water Level Cut-off |
| Power Supply | AC 220 ±5 V, 50 ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,150 (FOB) |
| Model | OK-UV-290 |
| Interior Dimensions (W×H×D) | 114 × 40 × 40 cm |
| Exterior Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Range | ≥95% RH |
| Temperature Control Accuracy | ≤±0.5 °C |
| Temperature Uniformity | ≤±2 °C or ≤±3% |
| UV Lamp Type | Fluorescent UV Tubes (UVA-340 or UVB-313 equivalent) |
| UV Wavelength Range | 280–400 nm |
| Lamp Lifetime | Approx. 2,000 hours |
| Exposure Time Range | 0–999 hours (adjustable) |
| Chamber Material | SUS#304 Stainless Steel (inner & outer) |
| Heating System | U-shaped Titanium Alloy Heaters |
| Safety Features | Interlocked UV cutoff on door opening, Overtemperature Protection, Low-water Level Cut-off |
| Power Supply | AC 220 V ±5%, 50 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,150 (FOB) |
| Internal Chamber Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Range | ≥95% RH |
| Temperature Control Accuracy | ≤±0.5 °C |
| Temperature Uniformity | ≤±2 °C or ≤±3% |
| UV Lamp Type | Fluorescent UV Lamps (UVA-340 or UVB-313 equivalent) |
| UV Wavelength Range | 280–400 nm |
| Lamp Lifetime | ~2,000 hours |
| Exposure Time Range | 0–999 hours (adjustable) |
| Construction Material | SUS#304 Stainless Steel (inner & outer chamber) |
| Heating System | U-shaped Titanium Alloy High-Speed Heating Elements |
| Safety Features | Interlocked UV lamp cutoff upon door opening, Over-temperature Protection, Low-water Level Cut-off |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz |
| Brand | OK Instruments |
|---|---|
| Model | OK-UV-290 |
| Chamber Type | Fluorescent UV Accelerated Weathering Tester |
| Internal Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Range | ≥95% RH |
| Temperature Control Accuracy | ≤±0.5 °C |
| Temperature Uniformity | ≤±2 °C or ≤±3% |
| UV Source | Fluorescent UV lamps (UVA-340 or UVB-313 equivalent, spectral range 280–400 nm) |
| Lamp Lifetime | Approx. 2000 hours |
| Exposure Time Setting | 0–999 hours (digital timer) |
| Construction Material | Interior and exterior chamber walls — SUS#304 stainless steel |
| Heating System | U-shaped titanium alloy high-speed heating elements |
| Safety Protections | UV lamp interlock (auto-shutoff upon door opening), over-temperature protection, low-water-level cutoff |
| Power Supply | AC 220 V ±5%, 50 Hz |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,150 (FOB) |
| Internal Chamber Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Control | ≥95% RH during condensation cycle |
| Temp. Control Accuracy | ±0.5 °C |
| Temp. Uniformity | ±2 °C (horizontal) / ±3% (vertical) |
| UV Source | Fluorescent UVA-340 or UVB-313 lamps (typical lifespan: 2,000 h) |
| Spectral Range | 280–400 nm |
| Exposure Time Setting | 0–999 h (programmable) |
| Construction | Interior & Exterior – SUS 304 stainless steel |
| Heating System | U-shaped titanium alloy heating elements |
| Condensation Mechanism | Water-cooled cold surface condensation using tap water |
| Safety Features | Interlocked UV lamp cutoff upon door opening, over-temperature protection, low-water-level shutdown |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,150 (FOB) |
| Chamber Internal Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Range | ≥95% RH |
| Temp. Control Accuracy | ≤±0.5 °C |
| Temp. Uniformity | ≤±2 °C or ≤±3% |
| UV Source | Fluorescent UV Lamps (UVA-340 or UVB-313 equivalent) |
| Spectral Range | 280–400 nm |
| Lamp Lifetime | ~2000 h |
| Exposure Time Setting | 0–999 h |
| Construction Material | SUS 304 Stainless Steel (Interior & Exterior) |
| Heating System | U-shaped Titanium Alloy Heaters |
| Safety Features | Interlocked Door Cut-off, Over-Temperature Protection, Low-Water Level Shutdown |
| Power Supply | AC 220 V ±5%, 50 Hz |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Chamber Internal Dimensions (W×H×D) | 114 × 40 × 40 cm |
| External Dimensions (W×H×D) | 135 × 140 × 65 cm |
| Temperature Range | Ambient to 70 °C |
| Humidity Range | ≥95% RH |
| Temperature Control Accuracy | ≤±0.5 °C |
| Temperature Uniformity | ≤±2 °C (or ≤±3% of setpoint) |
| UV Source | Fluorescent UVA-340 or UVB-313 lamps (typical lifespan: ~1500 h) |
| UV Spectral Range | 280–400 nm |
| Exposure Time Setting | 0–999 h (digital timer with auto-stop) |
| Construction Material | Interior & Exterior – SUS304 stainless steel |
| Heating System | U-shaped titanium alloy high-speed heating elements |
| Safety Protections | Interlocked door cut-off for UV lamp power, overtemperature protection, low-water-level cutoff, thermal overload relay |
| Power Supply | AC 220 ±5 V, 50 ±0.5 Hz |
| [Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OK-UV-290.0 |
| Humidity Range | ≥95% RH (in-chamber actual value) |
| Lamp Power | 40 W per tube |
| Irradiance Range | 0.72 W/m² |
| Exposure Time Setting | 1–9999 h |
| Illuminated Temperature Range | RT to 70 °C |
| UV Wavelength Range | 280–400 nm |
| Chamber Internal Dimensions (L×W×H) | 1170 × 400 × 400 mm] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (Reference Only) |
| Light Source | Fluorescent UV-A (340 nm) and UV-B (313 nm) Lamps |
| Temperature Range | 40–70 °C (Controllable) |
| Humidity Control | Condensation Cycle (50–95% RH) |
| Irradiance Control | Yes (via calibrated sensor) |
| Spray Function | Integrated Water Spray System |
| Compliance | ASTM G154, ISO 4892-3, JIS D0205, GB/T 14522 |
| Chamber Volume | Standard 400 L (Customizable) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (Reference Only) |
| UV Lamp Type | UVA-340 / UVB-313 Fluorescent Lamps |
| Temperature Range | 30–70 °C (Controlled) |
| Humidity Control | Condensation Cycle (Humidification via Water Reservoir) |
| Irradiance Control | Yes (Calibrated Sensor) |
| Sample Exposure Area | Standard 450 mm × 1200 mm |
| Spray Function | Integrated Frontal Water Spray Nozzles |
| Compliance | ASTM G154, ISO 4892-3, JIS D0205, GB/T 14522 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,650 (Reference Only) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,650 (Reference Only) |
| Brand | Jianhu |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | JH-P |
| Pricing | Available Upon Request |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT to 85 °C (Operating Range: 50 ±10 °C) |
| Humidity Range | 40–70 % RH (Illuminated), 50–90 % RH (Dark Cycle) |
| Temp. Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.0 % RH |
| Temp. Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 % RH |
| Ramp-up Time (RT → 85 °C) | ≤25 min |
| Light Source | 2.5 kW Air-Cooled Metal Halide Lamp (1 unit) |
| Spectral Range | 295–450 nm |
| Irradiance | 200 ±8 W/m² (measured at sample plane) |
| Irradiance Uniformity | ≥90 % |
| Sample Tray Dimensions | 500 × 400 mm |
| Illumination Geometry | Top-mounted lamp with reflective direct irradiation |
| UV Sensor | Calibrated UV spectral irradiance transducer (developed by No. 622 Research Institute) |
| Temperature Range | RT +10°C to 300°C (customizable up to 500°C) |
|---|---|
| Internal Chamber Dimensions | 450 × 400 × 400 mm (W×H×D) |
| External Dimensions | 650 × 900 × 600 mm (W×H×D) |
| Temperature Uniformity | ±1.5°C |
| Control Accuracy | ±0.5°C |
| Heating System | Dual independent 2 kW far-infrared Ni-Cr alloy heaters |
| Sensor | PT100 platinum resistance thermometer |
| Controller | Microprocessor-based digital touch controller with timer (0–999 min) |
| Air Circulation | Forced convection via bottom-mounted blower with left-side air outlet |
| Standard Shelving | 3 stainless steel wire shelves (SUS304) |
| Power Supply | AC220V ±5%, 50 Hz, 2000 W |
| Compliance | GB/T 2423.2 (High-Temperature Test Method B) |
| Safety Features | Leakage current protection, over-temperature alarm & cut-off, thermal fuse backup |
| Brand | OK |
|---|---|
| Model Series | OK-TH-80 to OK-TH-1000 |
| Chamber Type | Vertical Benchtop-to-Floor-Standing Environmental Test Chamber |
| Temperature Range | -70 °C to +150 °C (configurable variants: A/B/C/D) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH or 10–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Port | One Ø50 mm test port (left side) |
| Controller | Color touchscreen LCD with bilingual (EN/CN) interface |
| Refrigeration | Hermetic low-noise dual-stage compressor system |
| Refrigerants | R404A / R23 (environmentally compliant) |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Safety | Real-time fault detection, auto power cutoff, over-temp/over-humidity protection, door seal integrity monitoring |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | −70 °C to +150 °C (configurable models A–D) |
| Humidity Range | 5–98 %RH (standard 20–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Refrigeration System | Hermetic dual-stage compressor with R404A/R23 eco-refrigerants |
| Controller | LCD touch-screen interface with bilingual (English/Chinese) OS |
| Construction Material | SUS#304 stainless steel interior and exterior |
| Standard Accessories | One φ50 mm cable port, two adjustable SUS#304 shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cord |
| Compliance | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-30 (Cyclic Humidity), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 0°C to 80°C (Optional Low-Temp Models: –20°C, –40°C, –60°C) |
| Humidity Range | 20–98% RH (Customizable: 5–98% RH, 10–98% RH) |
| Control System | Microprocessor-Based PID + SSR + Timer |
| Air Circulation | Forced Convection with Extended-Shaft Centrifugal Blower (Motor External-Mounted) |
| Heating | Nickel-Chromium Alloy Resistive Heaters (Spiral Design, High Surface Area) |
| Cooling | High-Efficiency Finned-Tube Air Heat Exchanger |
| Humidification | Stainless Steel Steam Generator with Integrated Pure Water System |
| Dehumidification | Surface Cooling via Refrigerated Coil |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure Protection, Condenser Fan Overheat, Oil Pressure Monitoring, Phase Sequence & Phase Loss Detection, Earth Leakage Protection, Dry-Run Prevention for Heating/Humidification, Overload & Short-Circuit Protection, Independent Over-Temperature Cut-Off, Sample Power Output: Relay-Controlled AC220V / ≤2A (Fail-Safe Open on Fault) |
| Data Interface | USB Storage Export (Historical Curves & Raw Data), RS-232C Bidirectional Communication, Ethernet-Based Remote Monitoring & Control (Intranet-Compatible) |
| Compliance | Designed per ISO 17025-relevant environmental test infrastructure requirements |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | RT+5°C to +60°C |
| Temperature Uniformity | ≤ ±2°C (empty & loaded, within 300 mm from walls/floor) |
| Temperature Setting Resolution | 1°C |
| Ramp Rate | ≤30 min (from ambient to 60°C) |
| Power Supply | 380 V / 3-Phase / 50 Hz |
| Control Mode | Fully Automatic Fixed-Value Operation |
| Compliance | GB 10589, GB 11158, GB 10586 |
| Key | Temperature Range: -60°C to +80°C |
|---|---|
| Humidity Range | 20–98% RH (optional 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| Temp. Deviation | ±3°C (configurable) |
| Power Supply | AC 380 V, 50 Hz |
| Noise Level | ≤75 dB(A) |
| Construction | Double-skin color-coated steel insulated panels (EPS/polyurethane/rock wool, thickness 50–100 mm) |
| Structural Frame | Galvanized steel framework with aluminum or stainless-steel edging |
| Fire Rating | GB 8624–2012 Class B2 |
| Control System | Microprocessor-based PID + SSR + Timer, PLC-driven, touch-screen HMI |
| Compliance | Designed per ISO 16750-4, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, and ASTM D4332 |
| Key | Brand: OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Compliance | GB/T 2423.1–2, IEC 60068-2-1, IEC 60068-2-2, ISO 16750-4 |
| Interior Dimensions | Customizable (Typical Range: W2000 × D2000 × H2200 mm) |
| Construction | Sandwich Panel with Polyurethane Foam Insulation (≥100 mm thick) |
| Inner Wall Material | SUS304 Stainless Steel |
| Outer Cladding | Pre-painted Galvanized Steel or Color-Coated Steel |
| Floor Load Capacity | 500 kg/m² (uniformly distributed) |
| Door | Single Swing, W800 × H1800 mm, Triple-Layer Vacuum Insulated Window (450 × 340 × 40 mm) |
| Air Circulation | Top-Mounted Forced Convection System with SIROCCO Fans & Extended-Shaft AC Motors (1.5 HP, 380 V/3-phase) |
| Controller | TEMI 880 Touchscreen PID Controller (5.7″ or 10.4″ LCD, 320×240 resolution, bilingual UI, 100 programs × 1000 segments, segment duration up to 99h59m, loop count up to 999, multi-zone PID tuning) |
| Refrigeration | Dual-Stage Cascade System (Low-stage: R404A |
| High-stage | R23) |
| Compressor | Bitzer or Tecumseh Hermetic/Semi-Hermetic Units |
| Key Components | Danfoss TXV & Pressure Switches, Castel Solenoid Valves, Alco Oil Separators, Parker Filters |
| Safety Protections | Ground Fault Detection, Phase Failure & Undervoltage Protection, Chamber Overtemperature Cut-off, Compressor High/Low Pressure Shutdown, Oil Pressure Monitoring, Heater Overload & Short-Circuit Protection, Leak Current Protection, Water Level Sensing (for Humidity Models) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | 0°C to 150°C |
| Humidity Range | 20–98% RH (at 25–80°C) |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Fluctuation | ±0.5°C (unloaded) |
| Heating Rate | 1.0–3.0°C/min |
| Cooling Rate | 0.7–1.0°C/min |
| Humidity Deviation | +2 / −3% RH |
| Timer Range | 1–9999 hours |
| Chamber Models | OK-STH-100 (45×45×50 cm), OK-STH-225 (50×60×75 cm), OK-STH-500 (80×70×90 cm), OK-STH-800 (80×100×100 cm), OK-STH-1000 (100×100×100 cm) |
| Key | Temperature Range: -60°C to 100°C (selectable variants: -35°C/–20°C to 100°C) |
|---|---|
| Humidity Range | 15–95% RH |
| Temperature Stability | ±0.5°C |
| Humidity Stability | ±2% RH |
| Temperature Uniformity | ±2°C |
| Humidity Uniformity | ±3% RH |
| Temperature/Humidity Deviation | ≤±2°C / ≤±3% RH |
| Refrigerant | HFC-404A & HFC-23 (zero ozone depletion potential) |
| Construction | Modular PU-insulated panels |
| Inner Chamber | SUS304 stainless steel |
| Outer Shell | Color-coated steel |
| Heating | Stainless finned-tube electric heaters |
| Humidification | Stainless-steel sheathed steam generator |
| Airflow Design | Ceiling-mounted low-velocity discharge for high uniformity and minimal sample disturbance |
| Safety | Overload protection, compressor overheat/overcurrent/overpressure protection, dry-run and low-water alarms, power failure memory |
| Controller | Large LED-based multi-function programmable controller |
| Standard Port | One φ50 mm test port |
| Lighting | Explosion-proof interior lamp |
| Power Supply | AC 3-phase 5-wire 380 V / 50 Hz |
| Compliance | GB/T 5170.2–1996, GB/T 10592–1993, GB/T 2423.2–2008 (IEC 60068-2-2), GJB 150.3–2009, GJB 150.4–2009, GJB 360B–2009 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.7–1.0 °C/min |
| Control Accuracy | ±0.1 °C (PID, 0.1-class) |
| Display | Korean-made TFT Touchscreen LCD |
| Interface | RS485/RS232, Ethernet (optional) |
| Programming Capacity | Up to 1000 segments, 999 cycles |
| Compliance | Designed per IEC 60068-2, ISO 16750-4, ASTM D4332, MIL-STD-810H (environmental conditioning) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −70 °C to +120 °C |
| Humidity Range | 10–98% RH |
| Control System | PLC-based with LCD touch interface (English/Chinese) |
| Sensor | Platinum RTD (PT-100, Class A) |
| Interface | RS-232C / RS-485 |
| Construction | Sandwich-panel design with pre-painted outer skin, SUS304 stainless steel inner chamber, and high-efficiency glass fiber insulation |
| Door Options | Hinged, sliding, swing, or motorized |
| Compliance | Designed to support ASTM D4332, ISO 6270, IEC 60068-2 series, and GLP/GMP-aligned validation protocols |