Environmental Test Chamber
Filter
Showing 61–90 of 2009 results
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-HX-B2 |
| Pricing | Available Upon Request |
| Internal Volume Options | 80 L, 150 L, 408 L, 800 L, 1000 L (custom volumes up to 100 m³ walk-in) |
| Temperature Range | –150 °C to +200 °C |
| Humidity Range | 10–98 % RH (standard: 20–98 % RH) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±2.5 % RH |
| Humidity Stability | ±3 % RH |
| Heating Rate | ≥3 °C/min (up to 5 °C/min typical) |
| Cooling Rate | ≥1 °C/min (up to 5 °C/min typical) |
| Control System | Balanced Temperature & Humidity Control (BTHC) with PID-driven SSR regulation |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Chamber Material | SUS#304 brushed or powder-coated stainless steel |
| Insulation | Rigid polyurethane foam + glass wool |
| Refrigeration | Hermetic French Tecumseh compressors, eco-friendly refrigerant |
| Controller | TEMI touchscreen HMI (South Korea), integrated with Italian/Danish/Japanese components |
| Safety Protections | Compressor overheat/overcurrent/overpressure, dry-run prevention for heaters/humidifiers, chamber over-temperature, low-water alarm |
| Power Supply | 3-phase 5-wire 380 VAC ±10% or 2-phase 3-wire 220 VAC ±10% |
| Brand | APKJ |
|---|---|
| Model | AP-HX-D1 |
| Type | Mobile Environmental Test Chamber |
| Application | Temperature Cycling, Thermal Shock, Constant/Alternating Humidity Testing |
| Construction | Stainless Steel Interior (SUS304), Cold-Rolled Steel Exterior with Electrostatic Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | Imported Silicone Gasket |
| Control System | Korean-Made Touchscreen PID Controller (0.1°C/0.1%RH Resolution), BTHC Balanced Heating/Cooling/Humidifying/Dehumidifying |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Tank Steam Generator |
| Refrigeration | Original Imported Hermetic Compressor, Single-Stage or Cascade Low-Temperature System |
| Air Circulation | Custom Aluminum Impeller Driven by HVAC-Grade Motor |
| Safety Protections | Independent Over-Temperature Cut-off, Compressor Overheat/Overcurrent/Overload Protection, Fan Overheat Protection, Low-Water Alarm, Real-Time Deviation Alarms (High/Low/Out-of-Spec Temp & RH) |
| Data Interface | RS-485, USB Storage Port, Optional Printer Connectivity |
| Compliance | GB 10589, GB 10592, GB 10586, GB 11158, GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–89, GB 2423.2–89, GB 2423.3–91, GB 2423.4–91, GB 2423.22–87 |
| Certifications | Designed for GLP/GMP-aligned validation workflows |
| Brand | APKJ |
|---|---|
| Model | AP-HX1000 |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Temperature Range | 0°C to 150°C |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Fluctuation | ±0.5°C (unloaded) |
| Humidity Range | 20–98% RH |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Cooling Rate | 0.7–1.0°C/min |
| Programmable Capacity | 100 programs × 1000 segments × 999 cycles |
| Time Setting Range | 1–9999 hours |
| Refrigeration System | Dual-stage cascade refrigeration |
| Compressor | Hermetic French Tecumseh |
| Refrigerants | R404A / R23 (eco-friendly) |
| Internal Construction | Spiral copper refrigerant tubing, imported filter-driers, sight glasses, service valves, oil separators, solenoid valves, and liquid receivers |
| Leak Testing | 48-hour pressurized air leak test on entire refrigerant circuit |
| Heating/Cooling Systems | Fully independent |
| Power Consumption | 3.8 kW |
| Internal Chamber Dimensions (D×W×H) | 500×600×500 mm |
| External Dimensions (D×W×H) | 1150×900×1650 mm |
| Controller | Optional 7-inch programmable touchscreen interface with bilingual (EN/CN) UI, real-time curve display, screen lock function, and audit-ready parameter logging |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-KF-3.5m |
| Cooling Method | Water-Cooled |
| Temperature Range | RT+10°C to 80°C |
| Humidity Range | 65–98% RH |
| Irradiance (290–800 nm) | 550 W/m² |
| Xenon Lamp Power | 4.5 kW |
| Lamp Lifetime | ≥2000 h |
| Inner Chamber Dimensions (W×H×D) | 950×950×850 mm |
| Sample Exposure Area | 6500 cm² |
| Sample Mounting | Rotating Drum (≤3 rpm ±1 rpm) |
| Distance from Lamp to Sample | 375 mm |
| Black Panel Temperature Control | 65°C ±3°C or 100°C ±3°C (selectable) |
| Spray Cycle | 18 min spray / 102 min dry (adjustable) |
| Dark Cycle | Configurable with elevated humidity and condensation simulation |
| Compliance | ASTM C1442, ASTM D4459, AATCC TM16, ISO 4892-2, GB/T 16422.3 |
| Safety Protections | Door Interlock, Overtemperature, Overcurrent, Leakage Current, Phase Sequence Monitoring |
| Interior Material | Mirror-Finish SUS304 Stainless Steel |
| Exterior Material | Cold-Rolled Steel with Powder Coating or Optional Stainless Steel |
| Filtration System | Imported American Optical Filters (Inner & Outer) |
| Control Interface | Touchscreen HMI with Data Logging Capability |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | AP-KF-4.5m |
| Pricing | Upon Request |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | APKJ |
| Model | AP-LY |
| Compliance | IPX4, GB/T 2423.38–1990, GB 4706.32–2004, IEC 60529 |
| Internal Chamber Dimensions | 800 × 800 × 800 mm (D×W×H) |
| Turntable Speed | 1–10 rpm (adjustable) |
| Spray Arm Oscillation Angles | 45°, 90°, 180°, 350° (programmable) |
| Nozzle Diameter | φ0.4 mm |
| Nozzle Spacing | 50 mm |
| Flow Rate per Nozzle | 0.07 L/min ±5% |
| Water Pressure | 400 kPa (static), 80–100 kPa (dynamic spray pressure) |
| Oscillation Frequency | 25 cycles/min |
| Test Duration Range | 1–999,999 min |
| Sample-to-Nozzle Distance | 200 mm |
| Chamber Material | Interior – SUS304 stainless steel |
| Viewing Window | Tempered safety glass |
| Control System | Custom-developed touchscreen HMI (Xinjie brand) |
| Power Supply | 220 VAC, 50 Hz |
| Safety Protections | Overload & short-circuit protection, grounding protection, low-water level alarm with audible alert |
| Brand | APKJ |
|---|---|
| Model | AP-SC |
| Type | Environmental Test Chamber for Ingress Protection (IP) Rating Validation |
| Compliance | IP56, GB/T 4208–2017 (IEC 60529), GB/T 2423.37–2012, MIL-STD-810F Method 510.5 |
| Chamber Volume Options | 500 L (800×800×800 mm), 1000 L (1000×1000×1000 mm) |
| Dust Circulation | Vertical downward non-laminar flow with vibratory dust collection funnel and recirculating centrifugal blower |
| Dust Medium | Silica sand or talcum powder (75 µm sieve aperture, 50 µm wire diameter) |
| Dust Density | 2–4 kg/m³ |
| Airflow Velocity | ≤2 m/s |
| Pneumatic Pressure Range | 0.5–1.0 MPa |
| Vacuum Pump Option | 0–30 kPa (optional) |
| Sample Height Adjustment | 0–750 mm |
| Timing Range | 0–99 h 59 min (programmable cycle & blow-dust duration) |
| Timing Accuracy | ±1 min |
| Temperature Control | Ambient to +50°C (optional heating module) |
| Viewing Window | Large-area tempered glass with anti-dust sealing |
| Structural Integrity | High-precision sheet metal fabrication, fully sealed chamber body, zero external dust leakage |
| Control System | Imported LCD touch-panel programmable controller with real-time parameter display and data logging capability |
| Brand | APKJ |
|---|---|
| Model | AP-UV-3 |
| Chamber Internal Dimensions | 1170 × 500 × 450 mm (W×H×D) |
| External Dimensions | 1480 × 1300 × 550 mm (W×H×D) |
| Temperature Range | RT+20°C to 70°C |
| Humidity Range | ≥90% RH |
| Temperature Uniformity | ±1°C |
| Temperature Stability | ±0.5°C |
| UV Irradiance Range | Adjustable up to 1.0 W/m² |
| UV Spectrum Options | UVA-340 (315–400 nm) or UVB-313 (280–315 nm), 8 lamps total (4 per side) |
| Lamp Life | ≥1600 h |
| Black Panel Temperature Range | 50–70°C |
| Sample Holder Capacity | 24 standard frames (75 × 290 mm) |
| Sample-to-Lamp Distance | 50 ± 3 mm |
| Lamp Center Spacing | 70 mm |
| Water Tray Depth | 25 mm (auto-controlled) |
| Effective UV Exposure Area | 900 × 210 mm |
| Test Duration | 0–999 h (programmable) |
| Control System | TEMI880 color touchscreen controller (Korean) or RKC intelligent controller |
| Cooling/Condensation Mode | Automatic condensation cycle |
| Spray Function | Integrated automated water spray system |
| Construction Material | Interior & exterior SUS304 stainless steel |
| Compliance Standards | ASTM D822, D750, D1419, D2263, G23 |
| Optional Accessories | UV radiometer (UVA/UVB), RS232 bidirectional communication interface |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-XD-01 |
| Internal Chamber Dimensions (D×W×H) | 500×760×500 mm |
| External Dimensions (D×W×H) | 1350×1350×1700 mm |
| Sample Tray Size | 450×720 mm |
| Temperature Range | RT+10°C to 70°C (adjustable) |
| Humidity Range | 65–98% RH (adjustable) |
| Black Panel Temperature Range | 63–100°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Stability | ±0.5°C |
| Light Source | 4 × imported air-cooled xenon arc lamps (3 operational + 1 spare) |
| Lamp Power | 1.8 kW per lamp |
| Total Heating Power | 2 kW |
| Humidification Power | 0.75 kW |
| Irradiance Spectrum | 290–800 nm |
| Max Irradiance | ≤300 W/m² |
| Sample-to-Lamp Distance | 230–280 mm |
| Filter System | Triple-layer quartz glass filter |
| Rainfall Duration | 0–999 min (continuous) |
| Rainfall Cycle | 0–240 min (intermittent) |
| Water Spray Cycle Options | 18 min ON / 102 min OFF or 12 min ON / 48 min OFF |
| Nozzle Orifice Diameter | Ø0.8 mm |
| Light Exposure Time Control | 1–999 h or min (continuously adjustable) |
| Compliance | GB/T 2423.24–1995, ISO 4892-2 Method A |
| Power Supply | AC 380 V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Ambient Operating Conditions | 5–30°C, ≤85% RH, flat & ventilated floor, no strong vibration/EMI, ≥500 Ω·m purified water required for humidification and spray systems |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AP-XD-100A |
| Working Chamber Dimensions | 450 × 1170 × 500 mm |
| Overall Dimensions | 500 × 1280 × 1450 mm |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | 0–98% RH |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Control Method | PID Auto-Tuning |
| Lamp Center-to-Center Distance | 70 mm |
| Sample-to-Lamp Distance | 50 mm |
| Standard Specimen Size | 75 × 150 mm or 75 × 300 mm |
| Water Tray Depth | 25 mm (Auto-Controlled) |
| Effective Irradiated Area | 900 × 210 mm |
| UV-A Wavelength Range | 315–400 nm |
| UV-B Wavelength Range | 280–315 nm |
| Exposure Time Range | 0–999 h (Adjustable |
| Black Panel Temperature Range | 40–65°C |
| Power Supply | 3-Phase AC 380 V / 50 Hz, 5 kW |
| Weight | Approx. 110 kg |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-XD-80A |
| Xenon Lamp Power | 1500 W |
| Irradiance Range | ≤1120 W/m² |
| Light Exposure Cycle | 1–999 h (adjustable) |
| Humidity Range | 20–98% RH |
| Internal Chamber Volume | 80 L |
| Chamber Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Overall Dimensions (W×H×D) | 920 × 1670 × 950 mm |
| Weight | ~200 kg |
| Spectral Band Options | 340 nm (standard), 420 nm / 290–400 nm / 290–800 nm (optional, subject to filter configuration) |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-YW-02 |
| Price Range | USD 7,000–14,000 (FOB) |
| Spray Mode | Continuous Spray Only |
| Spray Rate | 1–2 mL/80 cm²·h |
| Nozzle Pressure | 0.7–1.0 kg/cm² |
| Fog Removal Method | Air-Compression Exhaust |
| Salt Fog Deposition Rate | 1–2 mL/80 cm²·h |
| Temperature Range | −20°C to +70°C |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-ZD |
| Pricing | Upon Request |
| Load Capacity | 100 kg |
| Frequency Range | 100–300 rpm |
| Amplitude | 25.4 mm |
| Vibration Mode | Orbital (Reciprocating) Motion |
| Simulated Vehicle Speed | 25–40 km/h |
| Test Table Dimensions | 1300 × 1200 mm |
| Overall Dimensions (L×W×H) | 1355 × 1270 × 670 mm |
| Power Consumption | 1 HP (746 W) |
| Net Weight | 125 kg |
| Operating Environment | 5–40 °C, ≤85% RH |
| Speed Control | DC Motor Speed Regulation or AC Variable-Frequency Drive |
| Power Supply | 220 V, 50 Hz |
| Brand | APKJ |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | APHX |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 100°C (standard) |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Stability | ±0.2°C |
| Humidity Stability | ±2.5% RH |
| Heating Rate | ~3°C/min (RT to +150°C in ~40 min) |
| Cooling Rate | ~1°C/min (RT to −70°C in ~100 min) |
| Internal Volume Options | 80 L to 1000 L |
| Construction | Interior – SUS304 stainless steel |
| Control System | Imported microprocessor-based temperature & humidity controller with direct %RH display, PT100 platinum resistance sensors, ±0.1°C/±0.1% RH setpoint & indication accuracy |
| Safety Features | Independent over-temperature cutoff, dry-run protection, water shortage detection, liquid level monitoring, compressor overpressure/overheat/overcurrent protection, emergency stop, no-fuse breakers |
| Power Supply | 1φ3w AC220V ±10%, 50/60 Hz or 3φ5w AC380/415V ±10%, 50/60 Hz |
| Standard Accessories | Φ50 mm cable port with cover, 2 adjustable stainless steel shelves, 5 pieces of humidity wick cloth, interior LED lighting, full operation manual |
| Brand | Apkji (APKJ) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | 100AP-HX |
| Price Range | USD 1,400 – 7,000 |
| Instrument Type | Benchtop |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5°C |
| Humidity Deviation | ±2% RH |
| Heating Rate | 3.0°C/min |
| Brand | Apkji (APKJ) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | 150AP-HX |
| Pricing | Available Upon Request |
| Temperature Range | RT+10°C to 100°C |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±2°C |
| Temp. Stability | ±0.5°C |
| Humidity Accuracy | ±2% RH |
| Heating Rate | ~20 min (RT → 100°C) |
| Control Resolution | ±0.1°C / ±0.1% RH |
| Compliant Standards | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993 |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-CJ-150C |
| High-Temperature Range | +60 °C to +180 °C |
| Low-Temperature Range | −20 °C to −75 °C |
| Thermal Shock Range | −65 °C to +150 °C |
| Temperature Stability | ±2.0 °C |
| Heating Rate | ≤5 °C/min |
| Cooling Rate | ≤5 °C/min |
| Internal Dimensions (W×H×D) | 500×600×500 mm |
| External Dimensions (W×H×D) | 1020×1470×1080 mm |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| High-Temp Preheat Range | RT to +180 °C |
| Low-Temp Precool Range | RT to −75 °C |
| Temperature Recovery Time | ≤5 min |
| Transfer Time Between Zones | ≤10 s |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | 3AP-UV |
| Pricing | Upon Request |
| UV Lamps | 8 × 40W imported UVA-340 or UVB-313 fluorescent tubes (4 operational + 4 spares) |
| Irradiance Control | Adjustable |
| UV Temperature Range | 50–75 °C |
| Condensation Temperature Range | 40–60 °C |
| Test Capacity | 48 specimens |
| Water Supply | Deionized or distilled water, 18 L/day |
| Dimensions (W×H×D) | 137 × 135 × 53 cm |
| Weight | 136 kg |
| Power Supply | 1φ3W AC220V ±10%, 50/60 Hz, max. 2.2 kW |
| Standards Compliance | ASTM G154, ASTM D4587, ASTM D4799, ISO 4892, SAE J2020, GB/T 16422.3 |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Ap-CJ-150L |
| Temperature Range Options | A-Type (−20 °C to +100 °C / +150 °C), B-Type (−40 °C to +100 °C / +150 °C), C-Type (−70 °C to +100 °C / +150 °C) |
| Temperature Uniformity | ≤ ±0.5 °C |
| Temperature Stability | ≤ 2 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Internal Dimensions (W×D×H) | 700 × 600 × 600 mm |
| External Dimensions (W×D×H) | 1900 × 2000 × 1640 mm |
| Control System | Fuji Electric Intelligent LCD Temperature & Humidity Controller (AP-CJ-250 variant referenced) |
| Refrigeration | Twin-stage cascade refrigeration system with French Tecumseh hermetic compressors and multi-plate evaporators |
| Heating | Nickel-chromium alloy electric heaters |
| Air Circulation | Low-noise, high-efficiency centrifugal blower with stainless-steel impeller and adjustable multi-wing airflow ducting |
| Insulation | High-density polyurethane foam + ultra-fine glass fiber composite |
| Sensor | PT100 platinum resistance thermometer |
| Compliance | GB/T 2423.1–2008, GB/T 2423.2–2008, GB/T 2423.22–2012, GJB 150.5–1986, GJB 360.7–1987, GJB 367.2–1987, QC/T 17–1992, EIA-364-32, IEC 60068-2-14 |
| Safety Protections | Over-temperature/over-cooling cut-off, compressor high-pressure protection, leakage current interrupter, fast-acting fuse, grounding fault detection, audible alarm |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | AP-CJ-2D |
| Price | Upon Request |
| High-Temp Zone | 80–200 °C |
| Low-Temp Zone | −10 to −70 °C |
| Test Zone Range | −10 to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Heating Rate | ≤5 °C/min (avg.) |
| Cooling Rate | ≤5 °C/min (avg.) |
| Pre-cooling Limit | ≤−70 °C |
| Thermal Shock Range | +150 °C to −60 °C |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Sample Tray Size | 150×150 mm |
| Temperature Recovery Time | ≤5 min |
| Basket Transfer Time | ≤10 s |
| Shock Mechanism | Vertical basket transfer or flip-door type |
| Power Supply | 380 V ±10%, 50 Hz |
| Refrigeration System | Twin-stage cascade refrigeration with imported Tecumseh (France) hermetic compressors |
| Controller | 7.5″ TFT LCD touch screen, wide-view angle, adjustable backlight, Chinese UI |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-DG-80A |
| Chamber Type | Upright |
| Temperature Range | -40°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤ ±0.5°C |
| Humidity Deviation | ≤ ±2.0% RH (at >75% RH) |
| Heating Rate | 1.0–3.0°C/min |
| Refrigeration System | Hermetic Rotary Compressor |
| Control Interface | 5.7-inch TFT Color LCD Touchscreen (Q8-902) |
| Programming Capacity | 269 programmable profiles, up to 50 steps per profile, 3200 cycles per step |
| Data Logging | Battery-backed RAM, 90-day storage (1-min sampling interval) |
| Compliance | Designed for ASTM D4332, ISO 4892-2, IEC 60068-2-1/2/14/30, GB/T 2423.1–2423.4 |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Model | AP-DL |
| Compliance | ISO 2248, JIS Z0202-87, GB/T 4857.5-92, GB/T 2423.8 |
| Drop Height Range | 300–1500 mm (AP-DL-150A) / 300–1800 mm (AP-DL-180A) |
| Height Display | Digital encoder-based readout with ±10 mm accuracy |
| Max Specimen Weight | 60 kg |
| Max Specimen Dimensions | 200 × 800 × 1000 mm |
| Impact Plate Size | 1600 × 1100 × 20 mm |
| Overall Dimensions | 1600 × 1100 × 2230 mm (AP-DL-150A) / 1600 × 1100 × 2530 mm (AP-DL-180A) |
| Control Box Dimensions | 350 × 350 × 1100 mm |
| Drive Motor Power | 1.1 kW |
| Net Weight | 600 kg |
| Power Supply | 3-phase 5-wire AC 380 V ±10% |
| Drop Orientation | Face, Edge, Corner |
| Angular Accuracy | ≤5° deviation between impact surface and base plate plane |
| Structural Design | Single-arm, dual-column frame with electro-hydraulic actuation |
| Key Mechanisms | Motorized height adjustment, electric reset, programmable release, hydraulic damping system |
| Height Repeatability | ≤2% or ±10 mm of set value |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-GD |
| Pricing | Upon Request |
| Max Operating Temperature | 150–200 °C |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-GD- |
| Pricing | Available Upon Request |
| Temperature Range Options | A: 0°C to 150°C |
| B | −20°C to 150°C |
| C | −40°C to 150°C |
| D | −60°C to 150°C |
| E | −70°C to 150°C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Internal Dimensions (W×D×H, cm) | AP-HX-80 (40×50×40) |
| External Dimensions (W×D×H, cm) | AP-HX-80 (95×165×95) |
| Control Modes | Programmable & Constant-Temperature/Humidity |
| Refrigeration | Variable-Speed Compressor (0–100% Capacity Modulation) |
| Compliance | GB/T 10589–2008, GB/T 10592–2008, GB/T 2423.1–2022 (Cold Test), GB/T 2423.2–2022 (Dry Heat Test), GJB 150.3A–2009, GJB 150.4A–2009, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810H |
| Brand | Apkji |
|---|---|
| Model | AP-GD-100D |
| Internal Volume | 100 L |
| Temperature Range | −70 °C to +150 °C |
| Temperature Control Accuracy | ±0.2 °C |
| Temperature Uniformity | ±2 °C |
| Heating Rate | ~3 °C/min (RT to +150 °C in ~40 min) |
| Cooling Rate | ~1 °C/min (RT to −70 °C in ~100 min) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Refrigeration System | Cascade Refrigeration (R404A / R23) |
| Compressor | Tecumseh (France) Hermetic or Bitzer (Germany) Semi-Hermetic |
| Power Supply | 1φ3w AC220V ±10% 50/60 Hz or 3φ5w AC380/415V ±10% 50/60 Hz |
| Compliance | GB/T 10589, GB/T 10592, GB/T 2423.1, GB/T 2423.4, MIL-STD-810D Method 502.2 & 507.2 |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-GD-11 |
| Pricing | Upon Request |
| Temperature Range (Standard) | −40 °C to +150 °C |
| Temperature Range (Optional) | −120 °C to +150 °C |
| Humidity Range (Standard) | 30–98 % RH |
| Humidity Range (Optional) | 5–98 % RH |
| Temperature Resolution | 0.01 °C |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Resolution | 0.1 % RH |
| Humidity Deviation | ≤ ±2.5 % RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 Color LCD Touchscreen Controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (Custom 220 V Available) |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | SUS304 Stainless Steel or Powder-Coated A3 Steel |
| Refrigeration Compressor | Tecumseh (France) “Tecumseh” Series |
| Refrigerant | R23 / R404A / R507 (Environmentally Compliant) |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | AP-GD-50 |
| Pricing | Upon Request |
| Internal Chamber Dimensions (H×W×D) | 50×40×40 cm |
| Temperature Range Options | 0–150°C / –20–150°C / –40–150°C / –70–150°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Resolution | ±0.1°C |
| Sensor | PT100 Platinum Resistance Thermometer |
| Heating System | Nickel-Chromium Alloy Electric Heaters |
| Refrigeration System | Original Tecumseh (France) Hermetic Compressor |
| Cooling Medium | R404A/R23 or R507/R508B Dual-Stage Eco-Friendly Refrigerant |
| Air Circulation | Long-Shaft Motor with Stainless Steel Multi-Blade Impeller |
| Compliance Standards | GB/T 10589–1989, GB/T 10592–1989, GB/T 2423.1–1989, GB/T 2423.4–1993, MIL-STD-810D Method 502.2 & 507.2 |
| Key | Brand: Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AP-GD-7 |
| Pricing | Upon Request |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AP-GD-80-1 |
| Price | USD 3,200 (FOB Guangdong) |
| Temperature Deviation | ±2°C |
| Heating Rate | ≤60 min (from 25°C to +150°C) |
| Cooling Rate | ≤60 min (from 25°C to −40°C) |
| Brand | Apkji |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | AP-GD-800B |
| Temperature Deviation | ±2°C |
| Heating Time (from 25°C to 150°C) | ≤60 min |
| Cooling Time (from 25°C to −40°C) | ≤45 min |
| Temperature Range | −40°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤±2°C |
| Temperature Fluctuation | ≤±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Heating Method | Nickel-Chromium Alloy Electric Heater |
| Humidification Method | Steam Boiler System |
| Dehumidification Method | Surface Condensation via Evaporator Coil |
| Control System | TEMI300/TEMI880 or OYO Touchscreen Controller with PID Auto-Tuning, RS-232/RS-485 Interface, PT100 Sensor |
| Compliance | GB/T 2423.1–2001, GB/T 2423.3–1993 |