Environmental Test Chamber
Filter
Showing 121–150 of 2009 results
| Brand | ASLI |
|---|---|
| Model | OK-HAST-25 / OK-HAST-30 / OK-HAST-40 / OK-HAST-50 |
| Internal Chamber Dimensions | Φ25×40 cm / Φ30×50 cm / Φ40×60 cm / Φ50×70 cm |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH saturated steam |
| Pressure Range | Ambient + 0–4 kg/cm² (≈0–392 kPa gauge) |
| Max Continuous Operation | 400 hours |
| Chamber Design Pressure Rating | 2.65 kg/cm² at 140 °C |
| Hydrostatic Test Pressure | 6 kg/cm² |
| Safety Protection | Dual-stage pressure relief (electronic controller + mechanical safety valve) |
| Steam Generation | Independent steam generator chamber |
| Air Purge | Pre-test and in-test cold-air purge function |
| Water Level Monitoring | Immersion-type level sensor with auto-shutdown |
| Door Mechanism | Ergonomic lever-lock system |
| Valve System | High-temperature solenoid valves (dual-circuit configuration) |
| Brand | ASLI |
|---|---|
| Model | OK-ZTH-408 |
| Temperature Range | -55°C to +150°C |
| Temperature Ramp Rate | 15°C/min |
| Vibration Frequency Range | 1–5000 Hz (with PC-controlled option) |
| Vibration Mode | Vertical, Horizontal, or Combined (Vertical + Horizontal) |
| Max. Load Capacity | 50 kg |
| Effective Table Size | 1.0 m × 1.0 m |
| Peak-to-Peak Amplitude | 25.4 mm |
| Speed Display Resolution | 0.1 RPM |
| Drive Motor Power | 1 HP |
| Power Supply | 220 V, 50 Hz |
| Weight | ~300 kg |
| Compliance | GB/T 2423, IEC 60068-2-6 (FC), JJG 189–1997, GB/T 13309–1991, EN, ANSI, UL, ASTM, ISTA Transport Standards |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Material | Imported PVC or FRP (Fiberglass-Reinforced Plastic) |
| Saturated Air Tank | SUS316L Stainless Steel, 1.2 mm Thickness |
| Viewing Window | 8–10 mm Acrylic (PMMA), Impact-Resistant |
| Test Temperature Range | 35°C ±1°C (NSS), 50°C ±1°C (ACSS) |
| Saturated Tank Temp | 47°C ±1°C (NSS), 63°C ±1°C (ACSS) |
| Temperature Uniformity | ≤±2°C |
| Temperature Stability | ≤±0.5°C |
| Spray Rate | 1–2 mL/80 cm²/h (avg. over 16 h) |
| Air Pressure Supply | 1 kg/cm² (two-stage regulation) |
| Control System | Dual PID Digital Controllers (Test Chamber & Saturated Tank), 0.1 s–99.99 h Timer, 0–9999 h Accumulated Time Meter |
| Safety Features | Overload Protection, Over-Temperature Cut-off, Auto-Termination on Time Expiry |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Lamp Life | ~1,600 h at standard irradiance |
| Spectral Range | 300–1200 nm |
| Rated Power | 1.8–6 kW |
| Irradiance Control | 550 W/m² (300–800 nm) ±10% |
| Cooling | Forced-air |
| Filter System | Long-life optical filters for solar-spectrum fidelity |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | BCX |
| Temperature Range | Exposure Zone up to 55 °C (131 °F), High-Temp Option up to 71 °C (160 °F) |
| Chamber Construction | Fiberglass-Reinforced Polymer (FRP) with Gel-Coated Exposure Zone |
| Solution Reservoir Capacity | 35 US gal (132 L) |
| Spray System | Full-Fog Dispersion Tower or Full-Fog Dispersion II System |
| Humidification | Heated Air-Pressurized Fog Tower with Automatic Fill |
| Heating | Titanium Rod Heaters in Exposure Zone |
| Drainage | Front & Rear Wet-Bottom Drain Assemblies |
| Optional Features | Pneumatic Lid Assist (BCX9000/BCX11000), Transparent Polypropylene Lid (BCX9000), Ridge-Style Condensate-Resistant Lid Design |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SF Series |
| Chamber Capacity | 420–3680 L |
| Internal Dimensions (W×D×H) | 0.76×0.56×0.99 m to 3.05×1.22×0.99 m |
| External Dimensions (W×D×H) | 1.07×0.97×1.52 m to 3.81×1.52×1.60 m |
| Temperature Range | Ambient to 55 °C (standard operation) |
| Humidity Control | Non-condensing RH 10–98% |
| Salt Spray Deposition Rate | Compliant with ASTM B117 (typically 1.0–2.0 mL/80 cm²/h) |
| Compliance | ASTM B117, ASTM D1735, ISO 9227, ASTM G85 Annexes 4 & 5, ISO 6988, GM 4429P, GM 4465P, CASS, SWAAT, ASTM D2247, FLTM BQ4-2, Corrodcote™ |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | CCX |
| Temperature Range | Up to 71°C (standard), optional up to 90°C |
| Chamber Capacities | 565 L (CCX2000) to 3115 L (CCX11000) |
| Compliance | SAE J2334, Ford BI-123-01, Ford APGE, GM9540P, GMW14872, ASTM B117, ISO 9227, DIN 50021 |
| Control System | PLC-based with programmable multi-step cycling |
| Humidity Generation | Heated foam tower with pressure-regulated air bleed |
| Exposure Zone Construction | Fiberglass-reinforced polymer (FRP) with gel-coated interior |
| Solution Reservoir | 227 L (60 gal) standard |
| Heating | Titanium rod heaters in exposure zone |
| Lid Design | Ridge-roof configuration to prevent condensate drip |
| Sealing | Dual magnetic gasket on transparent lid |
| Optional Features | SO₂ injection, Prohesion™ mode, non-condensing humidity control |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | Ci3000+ |
| Lamp Power | 4500 W water-cooled xenon arc |
| Total Exposure Area | 2,188 cm² (339 in²) |
| Control Panel | 12-inch TFT full-color touchscreen |
| Predefined test methods | 14 (Weather-Ometer), 6 (Fade-Ometer) |
| Custom program slots | 12 |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SF Walk-In Series |
| Internal Dimensions (L×W×H) | 1.83×1.83×2.13 m (SF7000) / 2.44×1.83×2.13 m (SF9500) / 3.05×1.83×2.13 m (SF12000) |
| External Dimensions (L×W×H) | 2.13×2.13×2.74 m (SF7000) / 2.74×2.13×2.74 m (SF9500) / 3.35×2.13×2.74 m (SF12000) |
| Test Volume | 7,136–11,893 L |
| Temperature Range | Ambient to 49 °C (120 °F) |
| Construction | PVC-lined interior with sloped fiberglass or low-carbon steel chamber walls |
| Standard Features | Tempered Plexiglas® observation window, internal safety interlock door, elevated floor with rubber/plastic matting, external-mounted controls and lighting, digital temperature controller with display |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST CPS |
| Xenon Lamp Power | 1500 W |
| Irradiance Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | 35–100 °C (without SunCool) |
| Exposure Area | 560 cm² |
| Dimensions (W×D×H) | 90 × 35 × 35 cm |
| Cooling | Air-cooled lamp |
| Control System | Microprocessor-based with programmable keypad and monochrome display |
| Compliance | ISO 4892-1, CIE Publication No. 85 |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST CPS+ |
| Chamber Dimensions | 90 × 35 × 35 cm |
| Exposure Area | 560 cm² (28 × 20 cm) |
| Lamp | Air-Cooled 1500 W Xenon Arc Lamp |
| Irradiance Control Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | 35–100 °C (without SunCool) |
| Predefined Test Methods | 2 |
| User-Defined Test Programs | 6 |
| Display | Monochrome LCD with Keypad Interface |
| Language Support | English, German, Italian, French, Spanish, Polish, Russian, Chinese |
| Compliance | ISO 4892-1, ASTM G155, IEC 60068-2-9, JIS D 0205, SAE J2527 |
| Optional Accessories | Window Glass Filter, Daylight ID65 Filter, Cool White Fluorescent Filter, SunCool Active Cooling System, SunFlood Immersion System (40 L, temp-controlled), SunTray Sample Exchange Unit (8 × PMMA trays), Water-Cooled Sample Stage, ICH-D10/20/30 Powder Holders, SunCal BB/WB/Lux BST Calibration Sensors |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST CPS+ |
| Xenon Lamp Power | 1500 W |
| Irradiance Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | 35–100 °C (without SunCool) |
| Exposure Area | 560 cm² |
| Dimensions (W×D×H) | 90 × 35 × 35 cm |
| Cooling | Air-cooled lamp |
| Control Interface | Microprocessor-based with programmable keypad and monochrome display |
| Compliance | ISO 4892-1, CIE Publication No. 85 |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XLS+ |
| Chamber Dimensions | 90 × 54 × 62 cm |
| Exposure Area | 1170 cm² (39 × 30 cm) |
| Lamp | 1 × Air-Cooled 1700 W Xenon Arc Lamp |
| Irradiance Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) | 45–100 °C |
| Control Interface | Touchscreen (13 languages), Ethernet, RS232, Internal Memory |
| Compliance | ISO 4892-1, CIE Publication No. 85 |
| Programmable Tests | 10 profiles, up to 12 stages each |
| Optional Accessories | SunSpray (spray), SunFlood (immersion), SunCool (cooling) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XLS+ |
| Xenon Lamp Power | 1700 W |
| Irradiance Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | 45–100 °C |
| Exposure Area | 1170 cm² |
| Dimensions (W×D×H) | 90 × 54 × 62 cm |
| Compliance | ISO 4892-1, CIE 85 |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ FD |
| Dimensions | 90 × 91 × 172 cm |
| Exposure Area | 3000 cm² (740 × 368 mm) |
| Lamp Configuration | 3 × air-cooled 1700 W xenon arc lamps |
| Irradiance Control Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) / Black Panel Temperature (BPT) Range | 25–100 °C (with SunCool cooling system) |
| Chamber Temperature (CHT) Range | 15–70 °C |
| Humidity Control | ultrasonic humidification system (operational without SunCool) |
| Spray System | integrated 60 L tank, 25–70 °C spray cycles |
| Sample Plane Tilt | 5° |
| Irradiance & Temperature Tolerance | user-definable per parameter |
| Pre-programmed Tests | 10 free multi-stage test programs (up to 12 stages each) |
| Compliance | ISO 4892-1, CIE 85, ASTM G155, IEC 60068-2-9 |
| Interface | 7-inch color touchscreen (13 languages), Ethernet, RS232, memory card slot |
| Optional Software | XenoTouch (Remote Control, Email Alert, Online Monitoring) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ FD |
| Xenon Lamp Power | 1700 W |
| Irradiance Range | 30–65 W/m² (300–400 nm) |
| Exposure Area | 3000 cm² |
| Dimensions (W×D×H) | 90 × 91 × 172 cm |
| Black Standard Temperature (BST) Control Range | 25–100 °C |
| Chamber Temperature (CHT) Range | 15–70 °C (with SunCool cooling system enabled/disabled) |
| Humidity Control | Ultrasonic humidification system (optional with SunCool deactivation) |
| Spray System | Integrated 60 L tank, 25–70 °C operation |
| Sample Plane Tilt | 5° |
| Irradiance & Temperature Tolerance | User-definable setpoint tolerances for all critical parameters |
| Compliance | ISO 4892-1, CIE 85:2015 |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ ST |
| Lamp Type | Air-Cooled Xenon Arc (3 × 1700 W) |
| Exposure Area | 740 mm × 368 mm (2925 cm²) |
| Irradiance Control Range | 30–80 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Range | Up to 100 °C |
| Chamber Temperature (CHT) Range | Up to 70 °C |
| Humidity Control | Ultrasonic Humidification System (60 L Integrated Tank) |
| Sample Spray System | Front & Rear Nozzles |
| Tilted Test Plane | 5° for Drainage |
| Filter Options | Extended UV Cut-off at 280 nm, IR-Reflective Quartz Filter, Optional Daylight & Window Glass Filters |
| Compliance | SAE J2412, SAE J2527, ISO 4892-2, ASTM G155 |
| Interface | 7″ Touchscreen (13 Languages), Ethernet, RS-232, SD Card Slot |
| Software Compatibility | XenoTouch (Remote Control, Email Alert, Real-Time Monitoring) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | SUNTEST XXL+ |
| Chamber Dimensions (W×D×H) | 90 × 91 × 172 cm |
| Exposure Area | 79 × 39 cm (3000 cm²) |
| Lamp Configuration | 3 × air-cooled 1700 W xenon arc lamps |
| Irradiance Control Range | 30–65 W/m² (300–400 nm) |
| Black Standard Temperature (BST) Control Range | up to 100 °C (light phase) |
| Chamber Temperature (CHT) Control Range | up to 70 °C (light phase) |
| Humidity Control | ultrasonic humidification system |
| Water Spray System | 60 L integrated tank |
| Sample Plane Tilt | 5° |
| Test Termination Modes | radiant exposure (J/m²), light exposure time, or total runtime |
| Compliance | ISO 4892-1, CIE 85, ASTM G155, IEC 60068-2-9, ICH Q1B, Q5C |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | UVCTest |
| Chamber Type | UV-C Environmental Aging Test System |
| Light Source | UVC Germicidal Lamps (254 nm) |
| Temperature Range | Ambient to 80 °C |
| Humidity Control | Optional Integrated RH Module (10–95% RH, ±3% RH) |
| Sample Capacity | Standard 300 mm × 300 mm × 150 mm Exposure Zone |
| Compliance | ASTM G154, ISO 4892-3, IEC 60068-2-5 (UVC-modified), ATLAS Internal UV-C Irradiance Calibration Protocol |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | UVTest |
| Test Duration | 1–9999 h |
| Irradiance Range | Typical 0.89 W/m² (UVA), 0.71 W/m² (UVB) |
| Lamp Power | 40 W per tube |
| Humidity Control | High-humidity mode |
| Illuminated Chamber Temperature Range | 35–80 °C |
| Black Panel Temperature (BPT) Range | UV Phase 35–80 °C |
| Spectral Peak Wavelengths | 351 nm, 340 nm, 313 nm (irradiance-controlled) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | UVTest |
| Radiation Uniformity | ±4% |
| Irradiance Range | 0.35–1.55 W/m² (UVA), 0.35–1.00 W/m² (UVB) |
| Black Panel Temperature Range (UV Phase) | 35–80°C (95–176°F) |
| (Condensation Phase) | 35–60°C (95–140°F) |
| Sample Capacity | Up to 48 specimens on 24 dual-position sample racks |
| Approx. Weight | 140 kg (310 lbs) |
| Power Supply | 120 V (±10%), 1-phase, 2-wire (1/N/PE), 50/60 Hz, 12 A |
| Spray Water Pressure | 25–40 psi (1.7–2.7 bar) |
| Condensate Water Pressure | 2–60 psi (0.1–4.1 bar) |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | Xenotest 220 / Xenotest 220+ |
| Lamp | One 2200 W air-cooled xenon arc lamp |
| Exposure Area | 2310 cm² |
| Irradiance Control Range | 300–400 nm |
| Black Standard Temperature Control | Up to 100 °C (dual-control mode) |
| Chamber Temperature Control | Up to 65 °C (single-mode) or synchronized with black standard (dual-mode) |
| Relative Humidity Range (Illuminated Phase) | 20–85 % RH |
| Humidity System | Ultrasonic humidification with 60 L integrated reservoir and auto-refill |
| Sample Capacity | 38 standard textile specimens (19 dual-position sample holders) |
| Compliance | ISO 105-B02, AATCC TM16-2004 Option 3, Marks & Spencer C9/C9A |
| User Interface | Monochrome keypad panel (Xenotest 220) or color touchscreen with multilingual UI (Xenotest 220+) |
| Data Storage | Internal flash memory |
| Brand | ATLAS |
|---|---|
| Origin | USA |
| Model | Xenotest Alpha+ |
| Lamp Configuration | 1 × 2200 W air-cooled xenon arc lamp |
| Exposure Area | 1320 cm² |
| Maximum Irradiance | 180 W/m² (3× solar intensity, 300–400 nm) |
| Temperature Control | Chamber temperature only (up to 70 °C) or dual control (chamber + black standard thermometer, up to 130 °C) |
| Humidity Range | 10–95% RH |
| Humidity System | Ultrasonic humidification |
| Water Spray System | Integrated with 60 L reservoir |
| Sample Rotation | Motorized carousel accommodating 11 sample holders |
| Irradiance & BST Monitoring | XENOSENSIV sensor at sample plane (300–400 nm) |
| User Interface | Color touchscreen with multilingual support |
| Data Output | RS-232, Ethernet, SD card |
| Compliance | ASTM G155, ISO 4892-2, ISO 11341, SAE J2527, AATCC TM16, GB/T 16422.2, and other major weathering standards |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | CLIMATIC RH SERIES |
| Price | Upon Request |
| Chamber Volume | 100–1000 L |
| Temperature Range (dry) | 0–95°C |
| Temperature Uniformity (dry) | ±1°C |
| Temperature Uniformity (humid) | ±2°C |
| Relative Humidity Range | 10–98% RH |
| RH Stability | ±3% RH |
| Refrigerant | R134a (CFC-free) |
| Construction | Stainless Steel Interior |
| Cooling System | Air-Cooled Condenser |
| Humidity Generation | Continuous Water Feed |
| Dehumidification | Dedicated Evaporator |
| Control System | Dual-Channel Microprocessor |
| Viewing Window | Integrated Tempered Glass |
| Key | Temperature Range: −40 °C to +150 °C (optional down to −120 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 Color LCD Touchscreen Controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G |
| Inner Chamber Material | SUS304 Stainless Steel |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (Reference Only — Final Quotation Subject to Technical Specification Review and Configuration) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 36,500 (FOB Shanghai |
| Brand | OEM / Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Power Rating | 2.5 kW |
| Internal Chamber Dimensions | 100 × 100 × 100 cm |
| Spray Ring Radius | 400 mm / 500 mm (configurable) |
| Water Pipe Diameter | φ18 mm |
| Nozzle Diameter | φ0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillation Angle Range | ±45°, ±60°, ±90°, ±180° (adjustable) |
| Turntable Speed | 1 rpm (standard), optionally continuously variable |
| Control System | Programmable PLC-based controller with integrated time sequencing and frequency-controlled oscillation drive |
| Water Pressure Regulation | Precision flow meter + booster pump |
| Viewing Window | Large-area tempered safety glass |
| Water Supply | Integrated reservoir tank + pressurized delivery system |
| Safety Protection | Leakage current protection, short-circuit cutoff, motor overheat monitoring |
| Compliance | GB/T 10485–2007, GB/T 4208–2008, GB/T 4942.2–1993 |
| Sample Compatibility | Enclosures up to 100 cm diagonal footprint |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (Reference Only |
| Chamber Volume | 500 L |
| Operating Temperature Range | RT+10°C to 50°C |
| Dust Concentration | 2 kg/m³ (Dry Talcum Powder) |
| Dust Particle Size Distribution | 1–10 µm (≥50% ≤5 µm) |
| Sieve Mesh | 50 µm Wire Diameter, 75 µm Pitch |
| Power Supply | 220 V / 50 Hz |
| Construction | External A3 Steel (1.2 mm, Powder-Coated), Internal SUS304 Stainless Steel |
| Rotating Test Platform | PVC Hardboard Surface |
| Wetted Components | Stainless Steel or Copper-Alloy |
| Compliance | GB 4208, GB/T 2423.37–1989, IEC 60529 (IP Code), ISO 20653 (Road Vehicles – Degrees of Protection) |
| Brand | OEM / Custom-Branded |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB) |