Environmental Test Chamber
Filter
Showing 211–240 of 3643 results
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW Series Cyclic Corrosion Test Chamber |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | Single-phase or three-phase 380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, clean air |
| Humidity Range | 15% to 98% RH (controlled) |
| Temperature Control | Integrated refrigeration compressor system (continuous or standby operation) |
| Optional Features | Deionizer & sediment filter (recommended for water with >50 mg/L TDS), low-water-level alarm, external salt fog collection vessel, condensate-controlled fog generation, variable ventilation, ergonomic control panel, GRP composite enclosure with chemical/thermal resistance, pneumatic lid support, modular sample mounting fixtures |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001–CW1020 Series |
| Internal Volume | 100 L to 2000 L |
| External Dimensions (L×W×H) | 1000×600×645 mm to 2750×1220×1630 mm |
| Internal Dimensions (L×W×H¹×H²) | 600×450×375×565 mm to 2000×1000×850×1175 mm |
| Power Supply | 13–32 A, Single- or Three-Phase 230/380 V, 50/60 Hz |
| Compressed Air Requirement | Oil-free, dry, filtered |
| Pressure | 2–4 bar (30–60 psi) for spray generation |
| Temperature Range | 30–80 °C (chamber), ±1 °C accuracy |
| Saturated Air Tower | 65 °C ±1 °C, NiCr heating element with overheat protection and auto-refill humidifier |
| Salt Solution Reservoir | 114 L mobile external tank, integrated filtration, ~14 days continuous operation |
| Control System | Microprocessor-based, 7 programmable test methods, cycle timer with remaining count, spray/dry/purge sequencing |
| Optional | Low-level alarm, ergonomic control panel, GRP corrosion-resistant chamber body, insulated apex lid with gas spring support |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2241, DIN 50021 requirements |
| Brand | C&W |
|---|---|
| Origin | Netherlands |
| Model | CW1001 |
| Spray Method | Direct Air-Atomized Nozzle |
| Fog Output Rate | 1–2 mL/h |
| Nozzle Operating Pressure | 8.44 kg/cm² (≈120 psi) |
| Fog Collection Rate | 1–2 mL per 80 cm² per hour |
| Temperature Range | Ambient to 55 °C |
| Compliance | ASTM B117, ISO 9227, EN ISO 7253, DIN 50021, JIS Z 2371, SAE J2334, Ford CETP, GMW 14872, VW PV1210, BMW GS 90031, Renault D17 2025, etc. |
| Key | Temperature Range: −40 °C to +150 °C (optional −120 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 Color LCD Touchscreen Controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | +5°C to 55°C |
| Humidity Range | 85–95% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Modes | Continuous or Cyclic |
| Test Timing Range | 1–999 (s/min/h) adjustable |
| Chamber Volume Options | 60 L / 90 L / 120 L |
| Heating Power | 1.3–1.8 kW |
| Saturation Tank Temperature | Up to 63°C |
| Compliance Standards | ASTM B117, ISO 9227, GB/T 2423.17, GB/T 2423.18, GB/T 2423.26 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 28,000 (FOB) |
| Acceleration Range | 30–400,000 m/s² |
| Number of Test Stations | 4–64 |
| Max. Specimen Height | 200–300 mm |
| Specimen Mounting Radius | 200–1000 mm |
| Test Axes | X, Y, Z (sequential or independent orientation) |
| Startup Time | ≤3–5 min |
| Continuous Operation Duration | 30–60 min |
| Power Supply | AC 380 V, 1.5–6.5 kVA |
| Dimensions (L×W×H) | 924×910×1242 mm to 1953×470×993 mm |
| Weight | 1000–2300 kg |
| Slip Ring Configuration | 15-channel, 500 V / 5 A |
| Compliance | MIL-STD-202F, MIL-STD-810F, MIL-STD-883C, GJB 150, GJB 360, GB/T 2423, IEC 60068-2-27 |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | GDW Series |
| Temperature Range | −40 °C to +150 °C |
| Temperature Resolution | 0.1 °C |
| Humidity Range | 30–98 % RH |
| Temperature Control Accuracy | ±1 °C (typical measured deviation < 0.5 °C) |
| Temperature Uniformity | ≤2 °C (measured < 1 °C across working chamber) |
| Circulation Fan | 180 W, single-phase AC 220 V axial-flow |
| Interior Lighting | AC 12 V, 50 W |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | GZRM-XII45 |
| Pricing | Available Upon Request |
| Lamp Power Options | 1800 W, 2500 W, 4500 W, 7500 W |
| Spectral Filtering Configurations | Borosilicate/Borosilicate, Borosilicate/Soda-Lime, Quartz/Borosilicate, Quartz/Quartz, Lithium-Quartz/Quartz, Quartz/Long-Pass (Ford FLTM B0-116-01), etc. |
| Irradiance Control Range | 0.21–2.05 W/m² @ 340 nm |
| Typical Test Standards Compliance | ISO 105-B02/B06, AATCC TM16, ASTM G155, SAE J2412/J2527, VDA 75202, Ford FLTM B0-116-01, GB/T 16422.2, IEC 60068-2-9 |
| Brand | Charm Sciences |
|---|---|
| Origin | USA |
| Model | ROSA Portable Mycotoxin Detection Kit |
| Certification | USDA-GIPSA & FGIS Approved |
| Detection Targets | Aflatoxin, Deoxynivalenol (DON), Zearalenone (ZEN), T-2/HT-2 Toxins, Ochratoxin A (OTA), Fumonisins |
| Sample-to-Result Time | ≤5 min |
| Format | Lateral Flow Immunoassay (LFIA) |
| Regulatory Alignment | Compliant with AOAC Official Methods, ISO 17025–accredited workflows, USP <1033>, FDA 21 CFR Part 11 (when paired with ROSA Connect software) |
| Consumables Included | Pre-calibrated test cassettes, extraction buffers, centrifuge tubes, pipette tips, portable vortex mixer, digital balance (0.01 g resolution), mini-centrifuge (up to 10,000 rpm), sample grinders, and field-grade PPE kit |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Chamber Dimensions | Ø400 mm × L600 mm (Cylindrical) |
| External Dimensions | 900 × 700 × 1600 mm (W×D×H) |
| Inner Chamber Material | 3 mm SUS316 Stainless Steel |
| Outer Casing | Optional SUS304 Stainless Steel or Powder-Coated Steel |
| Insulation | Mineral Wool + Rigid Polyurethane Foam (≥80 mm thickness) |
| Steam Generator | Titanium Heating Element |
| Control System | Delta DOP-107SV Color Touchscreen PLC with PT100 Sensors |
| Humidity & Saturation Temperature Control | Microprocessor-Based PID Algorithm |
| Pressure Indication | Analog Bourdon-Tube Pressure Gauge (0–3.0 bar) |
| Water Supply | Manual Inlet Valve with Auto-Replenishment Function (Continuous Operation Enabled) |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB/T 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | CORROSIONBOX |
| Chamber Capacity | 450 L / 1000 L |
| Internal Dimensions (W×D×H) | 800×700×800 mm / 1100×800×1100 mm |
| External Dimensions (W×D×H) | 1320×720×1450 mm / 1640×820×1750 mm |
| Weight | 260 kg / 465 kg |
| Salt Solution Reservoir Capacity | 110 L / 260 L |
| Construction Material | 10 mm thick polypropylene (PP) |
| Chamber Insulation | Double-wall insulated |
| Temperature Range (Salt Fog Mode) | 35°C ± 2°C (standard) |
| Temperature Range (Condensation Mode) | 40°C ± 1°C |
| 雾化方� | �: Compressed air-driven saturated mist generation via central nozzle and diffusion tower |
| Heating System | Immersed heating elements with PID-controlled uniformity |
| Drainage | Integrated floor-level sump with gravity drainage |
| Compliance | Designed to meet ASTM B117, ISO 9227, JIS Z2201, DIN 50021 requirements |
| Brand | COFOMEGRA |
|---|---|
| Origin | Italy |
| Model | SOLARBOX Xe/R.H. |
| Chamber Volume | 40 L (SOLARBOX 1500e) / 75 L (SOLARBOX 3000e) |
| Temperature Range | 35–100 °C |
| Humidity Control | Optional Relative Humidity Monitoring |
| Irradiance Control | Continuous, Closed-Loop via Integrated Radiometer |
| UV Cut-off Filters | 280 nm, 300 nm, 310 nm, and IR-reducing filter |
| Sample Capacity | ≥120 pcs (15 × 30 mm) for 1500e |
| Programmable Cycles | Up to 15 multi-step programs |
| Interface | RS232-C for data logging and remote control |
| Compliance | ASTM G155, ISO 4892-2, ISO 11341, SAE J2527, DIN 75220, UNI EN 13523-13 |
| Temperature Range | -20 °C to +130 °C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Humidity Fluctuation | ±2% RH |
| Heating Rate | -20 °C to +120 °C ≤ 60 min |
| Cooling Rate | Ambient to -20 °C ≤ 45 min (unloaded) |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Test Duration Setting | 0–999 h |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1 (Cold), IEC 60068-2-3 (Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat) |
| Key | Temperature Range: −60 °C to +150 °C |
|---|---|
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Time Setting Range | 0–9999 h |
| Refrigeration System | Two-stage cascade mechanical compression |
| Refrigerant | HFC-R404A / HFC-R23 |
| Cooling Method | Water-cooled |
| Control Interface | Color touchscreen + PLC (OYO or TIME) |
| Construction | A3 steel exterior with powder coating |
| Viewing Window | Multi-layer tempered glass with conductive film |
| Cable Port | Ø50 mm (left side) |
| Humidification | Built-in water tank with booster pump |
| Air Circulation | Forced convection via extended-shaft stainless steel centrifugal blower (bottom inlet / top outlet) |
| Sealing | Dual-layer high-tensile high-temp silicone gasket |
| Vibration Integration | Optional electrodynamic or servo-hydraulic shaker system (user-specified) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 30–98 %RH |
| Temp. Uniformity | ≤ ±2.0 °C |
| Temp. Stability | ≤ ±0.5 °C |
| Humidity Stability | +2 / −3 %RH |
| Cooling Rate (no load) | 0.7–1.0 °C/min |
| Heating Rate (no load) | 1.0–3.0 °C/min |
| Refrigeration | Twin-stage cascade system with Tecumseh (France) hermetic piston compressors |
| Refrigerants | R404A / R23 / R14 (ODP-zero, GWP-optimized blend) |
| Expansion Control | Danfoss (Denmark) thermostatic expansion valves + capillary tubes |
| Solenoid Valves | SMC (Italy) |
| Evaporator & Condenser | Stainless-steel finned-tube assemblies, domestically fabricated per ASME BPVC Section VIII compliance |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Casing | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | High-Temperature Silicone Gasket |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Controller | Korean-Made 7" Touchscreen HMI with PID Auto-Tuning, 0.1°C/0.1%RH Resolution |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Water Tank Steam Generator |
| Refrigeration | Hermetic Compressor(s), Single-Stage or Cascade Cryogenic Circuit |
| Air Circulation | Custom Aluminum Impeller with AC Inverter Motor |
| Observation Window | Reinforced Double-Layer Low-E Glass with LED Illumination |
| Safety System | Redundant Over-Temp/Over-Humidity/Vibration-Interlock Protection |
| Vibration Interface | Motorized Vertical Lift Platform for Precise Alignment with External Shaker Table |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance | GB/T 2423, GJB 150, IEC 60068 |
| Control Interface | 7″ TFT LCD Touchscreen with RS232/RS485 |
| Refrigeration System | Hermetic Scroll Compressor + Dual-Circuit Cascade Cooling |
| Humidity Range | 20–98% RH (non-condensing) |
| Temperature Range | −70°C to +180°C |
| Vibration Integration | Compatible with Electrodynamic Shakers (5–2000 Hz, 100 kN max force) |
| Chamber Volume Options | 150 L to 1000 L |
| Programmable Profiles | Up to 99 segments, 999 cycles per profile |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Max. Load Capacity | 100 kg |
| Table Size | 500 × 500 mm |
| Stroke Amplitude | 0–5 mm |
| Peak Acceleration | 20 g |
| Frequency Range | 1–400 Hz |
| Sweep Range | 1–400 Hz |
| Waveforms | Sine, Half-Sine |
| Power Supply | 220 V ±10%, 5 A |
| Rated Power | 2.2 kW |
| Control Resolution | 0.01 Hz |
| Time Setting Range | Up to 1 year (1-second increment) |
| Chamber Internal Dimensions (V) | 500 × 500 × 160 mm |
| Compliance | Designed per IEC 60068-2-6, IEC 60068-2-64, MIL-STD-810H, GB/T 2423.10, GB/T 2423.3, GB/T 2423.4 |
| Key | Temperature Range: -20°C to +130°C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Stability | ±0.5°C (unloaded) |
| Humidity Stability | ±2% RH |
| Temperature Deviation | ≤±2°C |
| Humidity Deviation | ≤±2°C |
| Heating Rate | -20°C to +120°C ≤60 min |
| Cooling Rate | Ambient to -20°C ≤45 min (unloaded) |
| Time Setting Range | 0–999 h |
| Vibration Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Dynamic Load Capacity | 120 kg |
| Moving Mass | 2.7 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Excitation Force | 300 kN (300 kgf) |
| Noise Level | Low |
| Power Efficiency | 60% reduction vs. conventional designs |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 5%–98% RH |
| Temperature Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| RH Uniformity | ±3.0% RH |
| Temp. Resolution | 0.1°C |
| RH Resolution | 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction | Interior & Exterior SUS#304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam (CFC-Free) |
| Refrigeration | Air-Cooled, Single-Stage Compressor (to –20°C), Two-Stage Compressor (to –70°C) |
| Safety Protections | Fuseless Circuit Breaker, Compressor Overload Protection, Refrigerant HP/LP Cut-off, Over-Temp/Over-Humidity Interlock |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Internal Liner | SUS304 Stainless Steel |
| External Casing | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | High-Performance Silicone Gasket |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Controller | Korean-Made 7" Touchscreen HMI with PID Auto-Tuning, 0.1°C/0.1%RH Accuracy |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Water Pan Steam Generator |
| Refrigeration | Hermetic Compressor, Single-Stage or Cascade Cryogenic Circuit |
| Water Purification System | Integrated Deionized Water Filter |
| Auto-Fill Function | Power-On Water Intake |
| Air Circulation | Custom Aluminum Impeller with AC Motor |
| Observation Window | Reinforced Double-Layer Tempered Glass with LED Illumination |
| Vibration Interface | Motorized Vertical Height Adjustment Mechanism (±150 mm Range) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.4–2023, GB/T 2423.22–2023 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 50 Hz, 1–600 Hz, 1–3000 Hz, 1–5000 Hz |
| Max. Acceleration | <20 g |
| Vibration Amplitude Range | 0–5 mm |
| Payload Capacity | 100 kg |
| Temperature Control Accuracy | ±0.1 °C |
| Temp. Resolution | 0.1 °C |
| Control System | PID + SSR with Auto-Tuning |
| Vibration Waveform | Sine (Half/Full Cycle) |
| Vibration Axes | Vertical (Z) + Horizontal (X/Y) |
| Test Duration Range | 1–65,000 s |
| Cycle Count Range | 1–65,000 cycles |
| Frequency Display Resolution | 0.01 Hz |
| Frequency Precision | 0.1 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Chamber Dimensions (mm) | Vertical Unit 500 × 500 × 150 |
| Key | Temperature Range: −70 °C to +150 °C |
|---|---|
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ≤ ±2.0 °C |
| Temp. Stability | ≤ ±0.5 °C |
| Humidity Stability | +2/−3% RH |
| Cooling Rate (unloaded) | 0.7–1.0 °C/min |
| Heating Rate (unloaded) | 1.0–3.0 °C/min |
| Vibration Type | Electromagnetic Shaker |
| Frequency Range | 2–500 Hz |
| Displacement Amplitude | 0–5 mm |
| Acceleration Range | 0–20 g |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GB/T 2423.10, GB/T 2423.48, GB/T 2423.49, GB 10586, GB 10589, GB 10592, GB 11158, GB/T 5170.2, GB/T 5170.5 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Internal Volume | Customizable per user requirement |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ 2 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Range | 20 %RH to 98 %RH (at +20 °C to +80 °C) |
| Humidity Deviation | ≤ ±3 %RH (≤75 %RH), ≤ ±5 %RH (>75 %RH) |
| Rapid Temperature Range | −55 °C to +85 °C |
| Ramp Rate | 5 °C/min or 10 °C/min (average or linear mode) |
| Refrigeration System | Semi-hermetic Copeland (Germany) compressors |
| Refrigeration Method | Dual-stage mechanical cascade |
| Refrigerants | HFC-R404A / HFC-R23 |
| Condenser | Stainless steel brazed plate heat exchanger |
| Cooler | Finned-tube air cooler |
| Cooling Method | Water-cooled |
| Air Circulation | Wide-band forced convection, bottom-in top-out, extended-shaft stainless steel centrifugal blower |
| Humidification | Integrated water tank with booster pump |
| Control System | Bilingual (English/Chinese) color touchscreen + PLC controller (OYO Japan or TIME Korea) |
| Vibration Subsystem | Optional electrodynamic or servo-hydraulic shaker (user-specified model & capacity) |
| Chamber Construction | Interior – mirror-finish SUS304 stainless steel |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | USD 12,500 (FOB) |
| Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic (Programmable) |
| Operating Temperature Range | +5°C to 60°C |
| Chamber Construction | Dual-layer UV-stabilized gray PVC with circumferential band-reinforced welded joints |
| Heating System | Independent Ni-Cr alloy heaters with PT100Ω RTD sensing |
| Control System | LED-display PID temperature controller with real-time logging capability |
| Spray System | Tower-type atomizer with non-crystallizing nozzles |
| Accessories | Standard漏斗 (funnel) & calibrated measuring cylinder, inline water filtration for brine supply, pre-heated brine delivery ensuring thermal equilibrium with chamber ambient |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | RT to +80°C / 0°C to +80°C / −10°C to +80°C |
| Humidity Range | 20–98% RH |
| Temp. Control Accuracy | ±0.5°C |
| RH Control Accuracy | ±2.0% RH |
| Temp. Uniformity | ±2.0°C |
| RH Uniformity | ±3.0% RH |
| Salt Spray Temp. (NSS/ACSS) | 35±1°C |
| CASS Test Temp. | 50±1°C |
| Pressure Tank Temp. (NSS/ACSS) | 47±1°C |
| CASS Pressure Tank Temp. | 63±1°C |
| Salt Solution | 5% NaCl or 5% NaCl + 0.26 g/L CuCl₂·2H₂O |
| Compressed Air Pressure | 1.00±0.01 kgf/cm² |
| Fog Deposition Rate | 1.0–2.0 mL/80 cm²/h (avg. over ≥16 h) |
| Refrigeration System | Hermetic dual-stage compressor with R404A/R23 eco-refrigerants |
| Controller | 7″ color TFT touchscreen, bilingual (EN/CN), RS232 interface |
| Program Capacity | 140 patterns × 1400 steps, max. 99 repeats per segment, full-cycle repeat up to 999× |
| Power Supply | 220V±5% / 50±0.5 Hz or 380V±5% / 50±0.5 Hz AC |