Environmental Test Chamber
Filter
Showing 1531–1560 of 2010 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C (saturated steam) |
| Humidity Range | 100 % RH |
| Pressure Range | 0.2–2.4 kgf/cm² |
| Internal Chamber Dimensions | Ø300 × 450 mm |
| External Dimensions | 660 × 1050 × 1250 mm |
| Chamber Material | SUS316 stainless steel |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Test Duration | 0–999 h adjustable |
| Heating Time | ≤45 min (RT to 132 °C) |
| Pressurization Time | ≤40 min (0 to 2.0 kgf/cm²) |
| Safety Features | Dual-stage overpressure protection, automatic pressure relief, dry-out cycle, filtered air purge (<1 µm), triple-level thermal cutoffs, water level monitoring |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Temperature Range | 105–135 °C (up to 143 °C optional) |
| Humidity Range | 70–100 % RH |
| Pressure Range | 0.0–2.0 kg/cm² (gauge), relative to ambient atmospheric pressure |
| Internal Dimensions (Φ×H, mm) | Φ250×300 / Φ300×450 / Φ450×500 / Φ650×600 |
| External Dimensions (W×H×D, mm) | 500×500×700 / 580×850×650 / 800×750×900 / 950×900×1100 |
| Safety Systems | Low-water cutoff, overpressure relief, interlocked door safety switch, automatic venting |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Standard Accessories | Two stainless-steel adjustable shelves |
| Compliance | Designed per JEDEC JESD22-A108, JESD22-A110, and IEC 60068-2-66 test methodologies |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 0–132 °C |
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ±0.5 °C (unloaded) |
| Humidity Uniformity | ±3% RH |
| Temp. Ramp Rate | 0.7–1.0 °C/min (unloaded) |
| Temp. Cycling Range | 20–80 °C |
| Test Duration Setting | 0–9999 h |
| Power Supply | AC 380 V |
| Refrigeration System | Hermetic Tecumseh (France) Compressor |
| Insulation | High-Density Ultra-Fine Glass Wool |
| Sealing | Dual-Silicone Gasket Design |
| Interior Material | SUS304 Mirror-Finish Stainless Steel |
| Exterior Finish | A3 Steel with Electrostatic Powder Coating |
| Air Circulation | Dual-Blower Forced Convection System |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Internal Dimensions | Φ25 × 40 cm |
| External Dimensions | W56 × H100 × D65 cm |
| Temperature Range | +100 °C to +132 °C |
| Humidity Range | 100% RH |
| Control System | Microprocessor-based PID controller with LED display and membrane keypad |
| Heating System | Stainless steel finned heaters (SUS#304) |
| Humidification Method | Electric surface evaporation |
| Water Requirement | RO purified water or distilled water |
| Supply Voltage | 1Φ 220 V, 8 A, 50 Hz ±10% |
| Safety Protections | Dual overheat protection, pressure relief valve, door interlock, dry-run protection for heater/humidifier, low-water cutoff, overcurrent/overload protection, thermal cut-off switch, fuseless overload protector |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Range | +100 °C to +132 °C |
|---|---|
| Temperature Uniformity | ±1.5 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Pressure Range (gauge) | 0–4 kg/cm² |
| Internal Chamber Pressure | 0–2.8 kg/cm² |
| Operating Pressure Band | 1.0–3.0 kg/cm² |
| Safety Pressure Capacity | 4 kg/cm² (1 atm + 3 kg/cm²) |
| Steam Circulation | Natural convection |
| Timer Range | 0–999 h |
| Pressurization Time (0 → 2.00 kg/cm²) | ~45 min |
| Heating Time (100 °C → 132 °C, no-load) | ~10 min |
| Temperature Ramp Rate | Air temperature average, not sample temperature |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | 100–132 °C |
| Humidity Range | 100 % RH |
| Temperature Uniformity | ±0.5 °C (unloaded) |
| Humidity Uniformity | ±3 % RH |
| Heating/Cooling Rate | 0.7–1.0 °C/min (unloaded) |
| Temperature Cycling Range | 20–80 °C |
| Timer Range | 0–9999 h |
| Power Supply | AC 380 V |
| Insulation | High-Density Fine-Glass Wool |
| Sealing | Dual-Silicone Gasket System |
| Refrigeration | Hermetic Tecumseh or Copeland Compressor (Equivalent to “Tecumseh”-class Performance) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel |
| Exterior Finish | Powder-Coated A3 Steel |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Internal Chamber Diameter × Depth | ∅30 cm × D (model-specific) |
| Temperature Range | 100–132 °C |
| Humidity Range | 75–100 % RH |
| Pressure Range | 0.0–2.0 kg/cm² (gauge), absolute pressure = 1.0 kg/cm² + gauge pressure |
| Max Safety Pressure Capacity | 4.0 kg/cm² |
| Temperature Uniformity | ±1.5 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressurization Time (0 → 2.0 kg/cm²) | ≈30 min |
| Internal Material | SUS316 stainless steel |
| External Material | SECC cold-rolled steel with electrostatic powder coating |
| Key | Test Volume: 90 × 90 × 90 cm (W×D×H) |
|---|---|
| Net Weight | 320 kg |
| External Dimensions | 900 × 700 × 1600 mm (W×D×H) |
| Internal Chamber | Cylindrical, Ø400 mm × L600 mm (HAST-45 type) |
| Inner Liner Material | SUS316 stainless steel (3 mm thick) |
| Insulation | Rockwool + rigid polyurethane foam |
| Heating Element | Titanium steam generator tube |
| Temperature Range | 20°C ±15°C |
| Humidity Range | 75–100% RH |
| Dust Concentration Options | 100 mg/m³, 3000 mg/m³, 5000 mg/m³, 60000 mg/m³ |
| Dust Velocity | 5 m/s (for selected concentrations) |
| Cycle Timing | 0–999 sec / 0–99 hr (dual-range programmable) |
| Control System | Color touchscreen PLC with PT-100 sensors, P.I.D. saturation control, analog pressure gauge, manual fill valve with auto-refill capability |
| Compliance | GB/T 10586–1989, GB 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,950 (FOB) |
| Internal Chamber Dimensions | Ø300 × 450 mm (D × H) |
| External Dimensions | 660 × 950 × 600 mm (W × H × D) |
| Internal Material | SUS304 Stainless Steel |
| External Finish | Powder-Coated Paint |
| Temperature Range | 100–132 °C (adjustable) |
| Humidity Range | 75–100 % RH (saturated steam) |
| Pressure Range | 0.0–3.00 kg/cm² (gauge) |
| Max Safety Capacity | 3.00 kg/cm² (1 atm + 2 kg/cm²) |
| Timer Range | 0–1000 h |
| Temperature Uniformity | ±2.0 °C at 100 °C |
| Heating Rate | RT to 121 °C in ≤35 min |
| Pressurization Rate | 0.0 to 1.00 kg/cm² in ≤35 min |
| Circulation Method | Natural convection of saturated steam |
| Temperature Sensor | PT-100 RTD (Platinum Resistance Thermometer) |
| Heating Element | Insulated, high-voltage-rated tubular heater |
| Controller | Microprocessor-based LED display with PID + SSR control |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressure Display Accuracy | ±0.15 kg/cm² |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Internal Chamber Dimensions | Ø300 × 450 mm (D × H) |
| External Dimensions | 660 × 950 × 600 mm (W × H × D) |
| Internal Material | SUS304 Stainless Steel |
| External Finish | Powder-Coated Steel |
| Temperature Range | 100–132 °C (adjustable) |
| Humidity | 100 % RH (saturated steam) |
| Pressure Range | 0.0–3.0 kg/cm² (gauge) |
| Max Safety Rating | 3.0 kg/cm² (g) |
| Time Setting Range | 0–1000 h |
| Temperature Uniformity | ±2.0 °C at 100 °C |
| Heating Rate | RT to 121 °C in ≤35 min |
| Pressurization Rate | 0.0 to 1.0 kg/cm² in ≤35 min |
| Circulation Method | Natural convection of saturated steam |
| Temperature Sensor | PT-100 RTD (Class A) |
| Heating Element | Insulated high-voltage resistance heater |
| Control System | Microprocessor-based PID controller with LED display for temperature/time |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressure Accuracy | ±0.15 kg/cm² |
| Power Supply | AC 220 V, 50/60 Hz, 1-phase, 4 kW |
| Electrical Wiring | 4 mm² copper conductor recommended |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +10 °C to 132 °C (optional custom up to 147 °C) |
| Internal Chamber Dimensions (Ø × H, cm) | 25×30, 35×40, 45×50, 65×60 |
| Chamber Material | AISI 316 Stainless Steel |
| External Enclosure | Powder-Coated or Stainless Steel |
| Pressure Range | 0.2–3.0 kg/cm² (≈20–294 kPa gauge) |
| Pressurization Time | ~45 min to 2.0 kg/cm² |
| Humidification Method | Electric Heating Tube |
| Water Replenishment | Stainless Steel Float Valve System |
| Vacuum Preconditioning | Integrated Vacuum Pump with Filtration |
| Power Supply | 220–240 V AC, 50/60 Hz, Single Phase |
| Safety Features | Dual-Limit Overpressure Relief (Auto + Manual), Interlocked Circular Door, LED Digital Timer, Real-Time Pressure/Temperature Monitoring, Fault Indicator Lights, Auto-Shutdown on Anomaly |
| Temperature Range | +100 °C to +132 °C (saturated steam temperature) |
|---|---|
| Humidity | 100% RH (saturated steam) |
| Operating Pressure | 1.5–3.2 kg/cm² (absolute pressure) |
| Time Setting Range | 000–999 hours |
| Pressure Ramp Time | ~45 minutes to reach 1.04 kg/cm² from ambient |
| Temperature Uniformity | ±0.5 °C |
| Temperature Display Resolution | 0.1 °C |
| Pressure Stability | ±0.2 kg/cm² |
| Controller | Microprocessor-based PID with PT-100 platinum RTD sensor |
| Safety Features | Interlocked door switch, mechanical safety valve, ABS thermal-insulated door cover, integrated silicone gasket |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (FOB) |
| Inner Chamber Dimensions (cm) | Φ25×35 |
| Temperature Range | 100–132 °C (143 °C optional) |
| Humidity | 100 % RH (saturated steam) |
| Pressure Range | 0.0–4.0 kg/cm² absolute (max safety capacity: 4.0 kg/cm² abs = 1 atm + 3.0 kg/cm² gauge) |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.5 °C |
| Chamber Material | SUS316 stainless steel |
| Exterior Material | Powder-coated steel |
| Heating System | Electric immersion heater with thermal cutoff |
| Safety Protections | Dual-stage overtemperature, dual-stage overpressure, emergency mechanical pressure relief, door pressure interlock, water-level alarm & auto-shutdown, heater dry-run protection, humidifier overcurrent protection, manual & automatic pressure release |
| Power Supply | AC 220 V / 50–60 Hz / single-phase OR AC 380 V / 50–60 Hz / three-phase |
| Key | Brand: OEKO Instruments |
|---|---|
| Chamber Dimensions (ID × H) | Φ25×40 cm / Φ30×50 cm / Φ40×60 cm / Φ50×70 cm |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH saturated steam |
| Pressure Range | Ambient + 0–4 kgf/cm² (≈0–392 kPa gauge) |
| Safety Certification | Dual-stage pressure relief, dual overheat protection, water-level sensor auto-refill, 140 °C tank-rated pressure vessel (2.65 MPa hydrostatic test compliance) |
| Max Continuous Operation | 400 hours |
| Steam Generation | Independent steam generator chamber |
| Air Purge | Pre-test and in-process cold-air purge cycle |
| Compliance | Designed for IPC-TM-650 2.6.25, JIS C 5023-4, MIL-STD-202 Method 108, and ISO 16750-4 environmental stress screening protocols |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH saturated steam |
| Pressure Range | 0–4 kgf/cm² (gauge) above atmospheric pressure |
| Internal Dimensions (PCT-25) | Φ25 cm × 40 cm |
| Internal Dimensions (PCT-30) | Φ30 cm × 50 cm |
| Internal Dimensions (PCT-40) | Φ40 cm × 60 cm |
| Internal Dimensions (PCT-50) | Φ50 cm × 70 cm |
| Sealing System | Patented dual-contact gasket design |
| Safety Systems | Dual-circuit high-temp solenoid valve, overpressure/overtemperature cut-off, mechanical anti-opening door lock, manual & automatic pressure release |
| Brand | OEM / Generic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–4 kgf/cm² above atmospheric pressure (0–392 kPa gauge) |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100% RH saturated steam |
| Internal Chamber Dimensions (D×H, cm) | Φ25×40 |
| Temperature Control Accuracy | ±0.1 °C (PID-controlled digital controller) |
| Safety Features | Dual overheat protection, mechanical safety valve, interlocked door switch, auto-water replenishment, condensate purge system, ABS insulated door cover, integrated silicone door gasket |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Pricing | USD 3,950–6,800 (FOB) |
| Internal Dimensions (W×H×D) | Ø250×300 mm / Ø350×400 mm / Ø450×500 mm / Ø650×600 mm |
| Chamber Material | ASTM A240 Type 316 Stainless Steel |
| External Casing | Powder-coated or 304 stainless steel |
| Temperature Range | +10°C to 132°C (optional 147°C custom calibration) |
| Pressure Range | 0–2.5 kg/cm² gauge (0–35.5 psi), max absolute pressure 3.5 kg/cm² |
| Heating Method | Immersed electric heating elements |
| Humidification | Direct steam generation via electric heater |
| Water Replenishment | Stainless steel float valve system |
| Cycle Control | LED digital timer with temperature-triggered start (ASTM E2035-compliant timing logic) |
| Safety Interlocks | Dual mechanical pressure lock, overpressure relief valve (ASME BPVC Section VIII compliant), door-seal integrity verification prior to pressurization |
| Power Supply | 220–240 VAC, 50/60 Hz, single-phase |
| Thermal Stability | ±0.5°C at setpoint (121°C) |
| Circulation | Natural convection steam atmosphere |
| Key | Temperature Range: −40 °C to +150 °C (optional down to −70 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temp. Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller |
| Internal Construction | SUS304 stainless steel |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (220 V optional) |
| Compliance | GB10589, GB10592, GB11158, GB/T5170.2, GB/T5170.5, GB2423.1/2/22, GB2424.1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Range | 100–147 °C (steam temperature) |
| Humidity | 100% saturated steam |
| Humidity Control Stability | ±3% RH |
| Operating Pressure | 1.2–2.89 kg/cm² (absolute, incl. 1 atm) |
| Test Duration | 0–999 h |
| Pressure Ramp Time | 0–1.04 kg/cm² in ~45 min |
| Temperature Uniformity | ±0.5 °C |
| Temperature Display Resolution | 0.1 °C |
| Pressure Uniformity | ±0.1 kg/cm² |
| Humidity Uniformity | ±3% RH |
| Internal Chamber Design Pressure Rating | 4 kg/cm² |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Temperature Range (Loaded) | -40 °C to +85 °C |
| Temperature Range (Unloaded) | -70 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 20–98% RH |
| Humidity Stability | ±2.5% RH |
| Humidity Uniformity | ±4.0% RH |
| Compliance Standards | IEC 61215, IEC 61646, IEC 62108, IEC 61730, UL 1703, IEEE 1513, GB/T 5170.2, GB/T 5170.5 |
| Key | Temperature Range: −40 °C to +150 °C (optional −120 °C to +150 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temp. Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller |
| Internal Construction | SUS304 stainless steel |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (custom 220 V available) |
| Key | Temperature Range: +100°C to +147°C (saturated steam temperature) |
|---|---|
| Humidity Range | 75–100% RH (saturated steam, up to 75% RH at 47°C) |
| Humidity Stability | ±3% RH |
| Operating Pressure | 1.2–2.89 kgf/cm² (inclusive of 1 atm ambient) |
| Time Setting Range | 0–999 hours |
| Pressurization Time | ~45 min to reach 1.04 kgf/cm² from ambient |
| Temperature Uniformity | ±0.5°C |
| Temperature Display Resolution | 0.1°C |
| Pressure Uniformity | ±0.1 kgf/cm² |
| Humidity Uniformity | ±3% RH |
| Internal Chamber Design Pressure Rating | 4.0 kgf/cm² |
| Vacuum Pre-Purge Function | Integrated |
| Safety Interlock | Dual-redundant pressure/temperature-sensing door lock |
| Water Autonomy | Up to 48 h continuous operation per fill (optional fully automated water replenishment system) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Key | Temperature Range: +110 °C to +132 °C |
|---|---|
| Temp. Uniformity | ±1.5 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Pressure Range | 0–2 kg/cm² (configurable up to 4 kg/cm²) |
| Max. Safety Pressure | 4 kg/cm² |
| Vacuum Preconditioning | Integrated particulate-filtered air intake (<1 µm) |
| Test Duration | 0–999 h |
| Steam Circulation | Natural convection |
| Water Consumption | Low—supports continuous operation up to 200 h per fill |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB/T 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Key | Chamber Dimensions (W×D×H): 800×800×800 mm or 1000×1000×1000 mm |
|---|---|
| Rated Voltage | 220 V ±10%, 50 Hz |
| Sample Rack Height Adjustment Range | 0–750 mm |
| Timer Range | 0–99 h 59 min |
| Timer Accuracy | ±1 min |
| Cycle Control (Load/Blow) | 0–99 h 59 min / 1 s–9999 min |
| Dust Concentration | 2–4 kg/m³ (dry talcum powder) |
| Powder Specification | Passes 75 µm square mesh sieve (wire diameter 50 µm) |
| Internal Construction | SUS201 stainless steel chamber |
| External Casing | A3 steel with electrostatic powder coating |
| Ambient Operating Conditions | 15–35 °C, 45–75 %RH (uncontrolled |
| Control System | PLC-based HMI touchscreen controller with PT100 temperature sensors |
| Safety Protections | Overtemperature cutoff, phase-loss detection, earth-leakage circuit breaker, reinforced tempered glass viewport (800×800 mm or 1000×1000 mm) |
| Airflow Design | Non-laminar, vertically oriented recirculating duct system |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range Options | -20°C to +150°C, -40°C to +150°C, -60°C to +150°C, -70°C to +150°C |
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ±2.0°C (ambient, unloaded) |
| Temp. Stability | ±0.5°C (ambient, unloaded) |
| Temp. Deviation | ±3.0°C (ambient, unloaded) |
| Heating Rate | 1.0–3.0°C/min (unloaded) |
| Cooling Rate | 0.7–1.0°C/min (unloaded) |
| Pressure Range | Ambient to 0.5 kPa |
| Pressure Accuracy | ±1.8 kPa (ambient–40 kPa), ±4.5% (40–4 kPa), ±0.1 kPa (4–0.5 kPa) |
| Depressurization Time | ≤45 min (ambient → 0.5 kPa) |
| Compliance Standards | GB10586-2006, GB10589-2006, GB10592-2006, GB11158-2006, GB/T2423.1–2423.3, GB/T5170.2–5170.5 |
| Key | Capacity Range: 80–1000 L |
|---|---|
| Temperature Range | −70 °C to +150 °C (configurable models) |
| Humidity Range | 5–98 %RH (standard: 20–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigeration | Hermetic dual-stage compressor with R404A/R23 eco-refrigerant |
| Controller | Touchscreen LCD with bilingual (EN/CN) interface |
| Construction | SUS304 stainless steel interior & exterior |
| Compliance | MIL-STD-810G, IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Damp Heat Cycle), GB/T 2423.1–2423.4, GJB 150.3–150.4 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 13,500 (approx.) |