Environmental Test Chamber
Filter
Showing 1621–1650 of 3663 results
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SP-120U |
| Internal Volume | 120 L |
| Internal Dimensions (W×H×D) | 500 × 600 × 400 mm |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 10 %RH to 98 %RH (with optional dehumidification module) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5 %RH |
| Heating Rate | −70 °C → +150 °C in ≤60 min (~3 °C/min) |
| Cooling Rate | +20 °C → −70 °C in ≤90 min (~1.2 °C/min) |
| Control System | ETAC820 Touchscreen PLC-Based Controller (50 programs, 2500 segments) |
| Refrigerant | R507 (HFC-based, ozone-safe) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Compressor | Imported Sealed Rotary Compressor (EU/US Origin) |
| Humidification | Stainless Steel UL-Type Steam Generator |
| Data Interface | LAN (SCADA/IPC-compatible), USB 2.0 Port |
| Safety Protections | Dry-run protection for humidifier, independent overtemperature cutoff, water shortage detection, compressor overcurrent/overpressure protection, earth leakage circuit breaker, thermal fuse |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SP-408 |
| Internal Volume | 408 L |
| Internal Dimensions (H×W×D) | 850×600×800 mm |
| External Dimensions (H×W×D) | 1100×1780×1250 mm |
| Temperature Range | −40 °C to +150 °C |
| Humidity Range | 20 %RH to 98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±1.0 %RH |
| Heating Rate | −70 °C to +150 °C in <90 min |
| Cooling Rate | +20 °C to −40 °C in <60 min |
| Control Method | BTHC (Balanced Temperature and Humidity Control) |
| Sensor Type | PT100 Dry/Wet Bulb Sensors |
| Heating System | Nickel-Chromium Alloy Wire Heaters |
| Humidification System | Shallow-Tank Electric Heater Type |
| Refrigeration System | Hermetic Twin-Screw Compressor (Tecumseh, Eco-Friendly Refrigerant R404A/R23) |
| Controller | TEMI Touchscreen HMI (Korea) |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Inner Chamber Material | Mirror-Finished Stainless Steel (SUS304) |
| Outer Chamber Material | Powder-Coated Steel or Stainless Steel |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure, Dry-Burn Prevention, Over-Temperature Alarm, Low-Water Level Alert, Circuit Isolation for Humidification Lines |
| Power Supply | 3φ5W 380 VAC ±10 % or 2φ3W 220 VAC ±10 % |
| Standard Accessories | Fluorescent Illuminated Viewing Window, φ50 mm Cable Port (Left Side), Two Adjustable Sample Racks, Castor Wheels, Integrated Water Reservoir (Rear-Mounted) |
| Optional | RS-485 Interface, Data Logger, Inner Glass Door with Glove Ports |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | SST-90 |
| Internal Chamber Dimensions | 600 × 450 × 400 mm (L×W×H) |
| Chamber Volume | 108 L |
| Salt Solution Tank Capacity | 15 L |
| Test Temperature | NSS/ACSS: 35 ±1 °C |
| CASS | 50 ±1 °C |
| Pressure Tank Temperature | NSS/ACSS: 47 ±1 °C |
| CASS | 63 ±1 °C |
| Salt Solution Temperature | 35 ±1 °C |
| Salt Concentration | 5% NaCl (w/v) or 5% NaCl + 0.26 g CuCl₂·2H₂O per liter |
| Compressed Air Pressure | 1.00 ±0.01 kgf/cm² |
| Fog Output Rate | 1.0–2.0 mL / 80 cm² / h |
| 雾喷雾 Mode | Continuous |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Heating Element | Corrosion-Resistant Titanium Tube |
| Control System | Digital PID Temperature Controller with ±0.3 °C Accuracy |
| Timer Range | 0.01 s to 999 h, Programmable Segment Timing & Countdown Mode |
| Safety Features | Dual Over-Temperature Protection, Auto-Cut-Off, Water-Level Monitoring with Visual/Audio Alert |
| Chamber Material | Reinforced PVC Board with Acid-Alkali Resistance & Thermal Stability |
| Nozzle | Precision Borosilicate Glass Nozzle (Rated >100,000 h Service Life) |
| Humidification | Henry’s Law-Based Saturated Air Humidification in Pressure Tank |
| Sealing | Water-Seal Fog Containment Trough with Auto-Replenishment |
| Exhaust Interface | Ø50 mm Outlet for External Ventilation Ducting |
| Chamber Door | Pneumatic Cylinder-Assisted Lift Mechanism |
| Optional De-Misting System | Integrated Post-Test Fog Extraction Module (Requires External Duct Connection) |
| Brand | LabCompanion |
|---|---|
| Model | STS-A / STS-B / STS-C / STS-D |
| Temperature Range Options | −60 °C to +150 °C |
| Shock Configuration | Dual-Zone (Low/High) or Triple-Zone (Low/Ambient/High) |
| Temperature Recovery Time | ≤ 5 min |
| Control System | Microprocessor-Based Programmable Controller with LCD Display |
| Internal Dimensions (W×D×H, cm) | STS-A: 40×35×30 |
| STS-B | 50×40×40 |
| STS-C | 60×50×50 |
| STS-D | 70×60×60 |
| External Dimensions (W×D×H, cm) | STS-A: 135×150×180 |
| STS-B | 155×152×190 |
| STS-C | 168×162×200 |
| STS-D | 178×172×210 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | T-150-5 |
| Price Range | USD 14,000 – 28,000 (FOB) |
| Temperature Range | -70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 5.0 °C/min |
| Cooling Rate | 5.0 °C/min |
| Internal Chamber Dimensions | 500 mm × 600 mm × 500 mm (W×H×D) |
| Brand | LabCompanion |
|---|---|
| Model | T-150 / T-225 / T-408 / T-800 / T-1000 |
| Temperature Range | -70 °C to +150 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ≤ ±1.5 °C (standard models), ≤ ±2 °C (T-800/T-1000) |
| Temperature Accuracy | ±0.1 °C to ±0.3 °C |
| Heating Rate (20 °C → +150 °C, no-load, nonlinear) | ~3.0 °C/min (T-150–T-408), ~2.5 °C/min (T-800/T-1000) |
| Cooling Rate (20 °C → -70 °C, no-load, nonlinear) | ~1.2 °C/min (T-150–T-408), ~1.0 °C/min (T-800/T-1000) |
| Internal Volume | 150 L, 225 L, 408 L, 800 L, 1000 L (customizable) |
| Refrigerant | R404A (ozone-friendly, non-CFC) |
| Control System | 7-inch color touchscreen interface with AI-enhanced thermal field compensation algorithm |
| Programmability | Up to 100 user-defined test profiles |
| Data Traceability | Network-enabled data logging, exportable CSV/Excel reports, audit-ready for GLP/GMP environments |
| Compliance | Fully aligned with GB/T 2423.1, GB/T 2423.2, IEC 60068-2-1, IEC 60068-2-2, ISO 16750-4, and GJB 150A-2009 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | T-150, T-225, T-408, T-800, T-1000 |
| Temperature Range | -70 °C to +150 °C |
| Cooling Method | Dual-Stage Cascade Refrigeration System (R404A refrigerant) |
| Temperature Uniformity | ≤ ±1.5 °C (≤ ±2.0 °C for T-800/T-1000) |
| Temperature Stability | ±0.1 °C to ±0.3 °C |
| Heating Rate (20 °C → +150 °C, no-load, nonlinear) | ~3.0 °C/min (T-150–T-408) |
| Cooling Rate (20 °C → -70 °C, no-load, nonlinear) | ~1.2 °C/min (T-150–T-408) |
| Internal Chamber Volume | 150 L, 225 L, 408 L, 800 L, or 1000 L (customizable dimensions available) |
| Brand | LabCompanion |
|---|---|
| Model | T-Series |
| Temperature Range | –70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Programmable Profiles | 4 curves, up to 1000 segments |
| PID Tuning | 6 independent sets |
| Communication Interfaces | RS-232, RS-485 |
| Cooling Options | Air-cooled or water-cooled |
| Refrigeration System | Tecumseh (France) hermetic or Copeland (Germany) semi-hermetic compressors |
| Interior Material | SUS304 stainless steel |
| Insulation | Polyurethane foam or fiberglass |
| Standard Ports | One φ50 mm test port with cover, two adjustable shelves, four shelf supports, fluorescent interior lighting |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | T-Series Rapid Temperature Change |
| Temperature Range | -70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 5.0 °C/min |
| Cooling Rate | 5.0 °C/min |
| Internal Chamber Dimensions | 800 × 850 × 600 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | T/C Series |
| Price Range | USD 7,000 – 14,000 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-based cooling |
| Explosion-Proof Option | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 5.0 °C/min (typical, non-linear, no-load) |
| Cooling Rate | 5.0 °C/min (typical, non-linear, no-load) |
| Internal Chamber Dimensions | 800 × 850 × 600 mm (W × H × D) |
| Brand | LabCompanion (Hongzhan Technology) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TC |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | Up to 5 °C/min (typical) |
| Cooling Rate | Up to 5 °C/min (typical) |
| Internal Chamber Dimensions | 800 × 950 × 800 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC Series |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Range | -70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ≤2 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rate (Heating/Cooling) | 1–25 °C/min (Linear or Non-Linear) |
| Internal Chamber Dimensions | 1000 × 1000 × 1000 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-1000-20 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rates | 5–25 °C/min (linear or non-linear) |
| Optional LN₂-assisted cooling | up to 30 °C/min |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| Compliance | GB/T 5170.2–2008 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-1000-15 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate Options | 5–25 °C/min (linear or non-linear) |
| Cooling Rate Options | 5–25 °C/min (linear or non-linear) |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| Compliance | GB/T 5170.2–2008 (temperature performance testing) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-1000-5 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rates | 5–25 °C/min (linear or non-linear) |
| Optional LN₂-assisted cooling | up to 30 °C/min |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| Compliance | GB/T 5170.2–2008 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | TC-1000-12 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate Options | 5–25 °C/min (linear or non-linear) |
| Cooling Rate Options | 5–25 °C/min (linear or non-linear) |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| Compliance | GB/T 5170.2–2008 (Temperature Testing Methods for Environmental Testing Equipment) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-1000-7 |
| Temperature Range | -70 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Ramp Rates | 5–25 °C/min (linear or non-linear) |
| Optional LN₂-assisted cooling | up to 30 °C/min |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| Compliance | GB/T 5170.2-2008 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-1000-10 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Humidity Range (optional) | 20–98% RH |
| Humidity Deviation | ±3.0% RH (<75% RH) |
| Heating Rate Options | 5, 10, 15, 20, or 25 °C/min (linear or non-linear profile) |
| Cooling Rate Options | 5, 10, 15, 20, or 25 °C/min (linear or non-linear profile) |
| Optional LN₂-assisted cooling | up to 30 °C/min |
| Internal Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| Compliance | GB/T 5170.2–2008 (temperature performance), GB/T 5170.5–2008 (humidity performance) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TC-1000-70-10 |
| Instrument Type | Upright Vertical Chamber |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±1 % |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3 %RH |
| Humidity Stability | ±1 %RH |
| Heating Rate | 1–25 °C/min (linear or non-linear ramping) |
| Interior Dimensions | Customizable |
| Brand | LabCompanion |
|---|---|
| Manufacturer | Hongzhan Technology (Guangdong, China) |
| Model | TC-1000R |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration | Dual-stage mechanical compression |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rate (Heating/Cooling) | 5.0 °C/min |
| Internal Chamber Dimensions | 1000 × 1000 × 1000 mm (W × H × D) |
| Controller | C100 Intelligent Touchscreen (10.4″ color LCD) |
| Compliance | GB/T 10592–2008, GB/T 2423.22–2008, GJB 150.3A–2009, GJB 150.4A–2009, IEC 60068-2-14 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Model | TC-150 |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Mechanical Compression Refrigeration |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ≤2.0 °C |
| Heating Rate | 1–25 °C/min (Linear or Non-Linear) |
| Cooling Rate | 1–25 °C/min (Linear or Non-Linear) |
| Internal Chamber Dimensions | 1000 mm × 1000 mm × 1000 mm |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TC-150-5 |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate | 5.0 °C/min |
| Cooling Rate | 5.0 °C/min |
| Internal Chamber Dimensions | 500 × 600 × 500 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-180-5 |
| Temperature Range | -70°C to +150°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Ramp Rates | 5–25°C/min (linear or non-linear profile) |
| Internal Dimensions (W×H×D) | 600 × 600 × 500 mm |
| Compliance | GB/T 5170.2-2008 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-180-11 |
| Temperature Range | -70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate Options | 5–25 °C/min (linear or non-linear) |
| Cooling Rate Options | 5–25 °C/min (linear or non-linear) |
| Internal Dimensions (W×H×D) | 600 × 600 × 500 mm |
| Compliance | GB/T 5170.2–2008 (Temperature Testing Methods for Environmental Testing Equipment) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-180-12 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate Options | 5–25 °C/min (linear or non-linear) |
| Cooling Rate Options | 5–25 °C/min (linear or non-linear) |
| Internal Dimensions (W×H×D) | 600 × 600 × 500 mm |
| Compliance | GB/T 5170.2–2008 (Temperature Testing Methods for Environmental Testing Equipment) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-180-6 |
| Temperature Range | -70 °C to +150 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rates | 5–25 °C/min (linear or non-linear profiles) |
| Internal Dimensions (W×H×D) | 600 × 600 × 500 mm |
| Compliance | GB/T 5170.2–2008 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-180-10 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate Options | 5–25 °C/min (linear or non-linear) |
| Cooling Rate Options | 5–25 °C/min (linear or non-linear) |
| Humidity Range (if equipped) | 20–98% RH |
| Humidity Deviation | ±3.0% RH (<75% RH), ±5.0% RH (≥75% RH) |
| Internal Dimensions (W×H×D) | 600 × 600 × 500 mm |
| Compliance | GB/T 5170.2–2008 (temperature performance), GB/T 5170.5–2008 (humidity performance) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TC-180-4 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rates | 5–25 °C/min (linear or non-linear) |
| Cooling Rates | 5–25 °C/min (linear or non-linear) |
| Internal Dimensions (W×H×D) | 600 × 600 × 500 mm |
| Compliance | GB/T 5170.2–2008, GB/T 5170.5–2016 (for thermal performance verification) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TC-180-2 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ≤2.0 °C |
| Heating Rate | 1–25 °C/min (linear or non-linear) |
| Cooling Rate | 1–25 °C/min (linear or non-linear) |
| Working Chamber Dimensions | 500 × 600 × 600 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Model | TC-180-8 |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Ramp Rate (Heating/Cooling) | 1–25 °C/min (linear or non-linear profile) |
| Internal Chamber Dimensions | 600 × 750 × 500 mm (W × H × D) |