Environmental Test Chamber
Filter
Showing 1441–1470 of 3663 results
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HST-225 |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 3.0–3.5 °C/min |
| Cooling Rate | 1.2 °C/min |
| Internal Chamber Dimensions (W×H×D) | 600 mm × 750 mm × 500 mm |
| Brand | LabCompanion |
|---|---|
| Model | HZ-80-E |
| Temperature Range | 0–100°C |
| Humidity Range | 30–95% RH |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| Temperature Resolution | 0.1°C |
| Humidity Resolution | 0.1% RH |
| Temp. Control Accuracy | ±0.3°C |
| RH Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±1°C |
| RH Uniformity | ±3% RH |
| Heating Method | Nickel-Chromium Wire Heater |
| Humidification | Shallow-Tank Electric Heater |
| Cooling System | Hermetic Compressor (Tecumseh) |
| Controller | TEMI Touchscreen HMI |
| Power Supply | 3φ5W 380VAC±10% or 2φ3W 220VAC±10% |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HZ-80-E |
| Temperature Range | 0–100°C |
| Optional Low-Temp Variant (RZ-80-E) | −20–100°C |
| Humidity Range | 30–95% RH |
| Internal Dimensions (W×H×D) | 40 × 50 × 40 cm |
| External Dimensions (W×H×D) | 100 × 80 × 65 cm |
| Temp. Resolution | 0.1°C |
| RH Resolution | 0.1% RH |
| Temp. Control Accuracy | ±0.3°C |
| RH Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±1.0°C |
| RH Uniformity | ±3.0% RH |
| Heating Rate | ~30 min to 100°C |
| Cooling Rate | ~40 min to 0°C / ~80 min to −20°C |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Sensor Type | PT100 Dry/Wet Bulb |
| Refrigeration System | Hermetic Compressor (Tecumseh/Tecumseh-equivalent, eco-friendly refrigerant) |
| Controller | TEMI Touchscreen HMI (Korea) |
| Power Supply | 3φ5W 380VAC ±10% or 2φ3W 220VAC ±10% |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Inner Chamber Material | Mirror-Finish Stainless Steel (SUS304) |
| Outer Chamber Material | Powder-Coated Steel or Stainless Steel |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure, Dry Heater Protection, Chamber Overtemperature, Low-Water Alarm |
| Standard Accessories | Observation Window with Interior Lighting, One φ50 mm Cable Port (Left Side), Two Adjustable Sample Racks, Castor Wheels, Built-in Humidification Tank |
| Optional Accessories | RS-485/RS-232 Communication Interface, Data Logger, Inner Glass Door with Glove Port |
| Brand | LabCompanion |
|---|---|
| Model | LC |
| Origin | Guangdong, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Temperature Range Options | −70 °C to 150 °C (customizable) |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Ramp Rate | 0.7–1.0 °C/min (average) |
| Time Setting Range | 0–9999 hours |
| Power Supply | AC 380 V |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–2001, GB/T 10592–1989, GJB 150.3–1986, GJB 150.4–1986 |
| Refrigeration System | Twin-circuit or single-circuit low-temperature refrigeration with imported components (Danfoss/Embraco compressors optional |
| standard | original French Tecumseh/Tecumseh-derived units) |
| Interior Material | SUS304 stainless steel mirror finish |
| Exterior Material | A3 steel with electrostatic powder coating |
| Viewing Window | Heated, double-layer tempered glass with interior LED lighting |
| Test Port | Φ50 mm |
| Controller | Fuji Electric programmable PID microcomputer controller (18-segment program, repeatable cycles) |
| Display Resolution & Accuracy | ±0.1 °C |
| Safety Protections | Over-temperature, phase loss/reverse-phase, overload, refrigerant high-pressure, timed operation, leakage current, fault-triggered shutdown |
| Brand | LabCompanion |
|---|---|
| Model | LC-1000S |
| Temperature Range | -70°C to +150°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Accuracy | ±0.3°C |
| Internal Dimensions (W×D×H) | 1000×1000×1000 mm |
| External Dimensions (W×D×H) | 1500×1850×1520 mm |
| Construction | Interior – SUS304 stainless steel mirror finish |
| Insulation | Rigid polyurethane foam (glass wool used at +150°C) |
| Refrigeration System | Hermetic compressor-based cascade cooling |
| Control System | Korean-made PID controller with LCD interface, English-language UI, LAN port (optional), data logging & curve display |
| Compliance | GB/T 10592–2008, GB/T 2423.22–2012 |
| Power Supply | AC 380 V, 50 Hz |
| Weight | 600 kg |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | LC-120 |
| Temperature Range | -20°C to +150°C / -40°C to +150°C / -70°C to +150°C |
| Temp. Fluctuation | ±0.5°C |
| Temp. Uniformity | ≤2.0°C |
| Temp. Deviation | ±2.0°C |
| Heat-up Time (20°C → 150°C) | ~60 min |
| Pull-down Time (20°C → -20°C) | ~60 min |
| (20°C → -40°C) | ~60 min |
| (20°C → -70°C) | ~9 min |
| Control Interface | 5.7" Color LCD Touchscreen |
| Control Algorithm | PID |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Compliance | GB11158, GB10589, GB10592-89, GB/T2423.1–2001, GB/T2423.2–2001, GB/T2423.22–2001, GJB150.3, GJB150.4 |
| Safety Protections | Overtemperature, Compressor Overpressure/Overload, Fan Overload, Phase Failure/Reverse Phase, Leakage Current, Short Circuit |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | LC-150 |
| Pricing | Upon Request |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate (0 °C → +150 °C) | ≤30 min |
| Cooling Rate (+20 °C → −70 °C) | ≤85 min |
| Internal Dimensions (W×D×H) | 500 × 500 × 600 mm |
| Internal Volume | 150 L |
| Refrigeration System | Dual-stage mechanical compression with R507/R23 eco-friendly refrigerants |
| Control System | Touchscreen LCD PID controller with programmable cycling (up to 140 programs, 1400 segments) |
| Safety Protections | Independent over-temperature cutoff, compressor overload/overcurrent protection, high-pressure refrigerant switch, earth leakage circuit breaker |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | LC-80 |
| Pricing | Available Upon Request |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ≤ ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Heating Rate (0 °C → +150 °C) | ≤30 min |
| Cooling Rate (+20 °C → −70 °C) | ≤85 min |
| Internal Dimensions (W×D×H) | 400 mm × 400 mm × 500 mm |
| Internal Volume | 80 L |
| Refrigeration System | Dual-stage mechanical compression with R507/R23 eco-friendly refrigerants |
| Control System | Touchscreen LCD PID controller with programmable cycling (up to 140 programs, 1400 segments) |
| Safety Protections | Independent overtemperature cut-off, compressor overload/overcurrent protection, high-pressure refrigerant switch, earth leakage circuit breaker |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LC-80 |
| Internal Chamber Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Temperature Range | −40 °C to +100 °C (optional up to +150 °C) |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ±0.5 °C (high-temp zone), ±1 °C (low-temp zone) |
| Heating Rate | ≥2–3 °C/min |
| Cooling Rate | ≤1 °C/min |
| Ambient Operating Conditions | 15–35 °C, ≤85% RH |
| Power Supply | AC 220 V ±10%, 50 Hz or AC 380 V ±10%, 50 Hz |
| Insulation Material | High-density ultra-fine thermal insulation cotton |
| Air Circulation | Stainless steel impeller, single-cycle forced convection with low-noise centrifugal blower |
| Safety Protections | Leakage current cutoff, compressor high-pressure & overheat protection, motor overcurrent & overload fusing, fan overheat monitoring, audible alarm system |
| Standard Features | Heated double-glazed observation window with conductive film, Φ50 mm cable port, moisture-resistant LED interior lighting, adjustable stainless steel sample shelves |
| Brand | LabCompanion |
|---|---|
| Model | LC-800S |
| Temperature Range | -70°C to +150°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Accuracy | ±0.3°C |
| Heating Rate (−70°C → +150°C) | ~60 min |
| Cooling Rate (+20°C → −70°C) | ~90 min |
| Internal Dimensions | 1000 × 1000 × 800 mm (W×D×H) |
| Construction | SUS304 Stainless Steel Interior |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface |
| Power Supply | AC380V, 50 Hz |
| Compliance | GB/T 10592–2008, GB/T 2423.22–2012 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | LCD-Specific |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | LE Series |
| Instrument Type | Vertical Chamber |
| Cooling Method | Air-Cooled |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 20–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ≤ ±2.5 % RH |
| Heating Rate | 3.0–3.5 °C/min |
| Internal Chamber Dimensions (W×D×H) | 800 × 850 × 600 mm |
| Refrigerants | R404A / R23 |
| Refrigeration System | Single-Stage or Dual-Stage Cascade Mechanical Compression |
| Brand | LabCompanion |
|---|---|
| Model | LH Series |
| Type | High-Temperature Aging Test Chamber |
| Standards Compliance | ASTM D2436, ASTM E145, JIS K630, JIS K7212, CNS 3556, JTTC SPEC-151 |
| Internal Dimensions (L×W×H) | LH-72: 40×40×45 cm |
| LH-150 | 50×50×55 cm |
| Temperature Range | Ambient to 200°C (optional to 300°C) |
| Heating Power | LH-72: 1.8 kW |
| LH-150 | 3.2 kW |
| Rotational Speed | 8–10 rpm |
| Motor Rating | LH-72: 1/4 HP |
| LH-150 | 1/2 HP |
| Air Circulation | Forced convection with axial fan and baffle-guided hot-air flow |
| Weight | LH-72: 80 kg |
| LH-150 | 120 kg |
| External Dimensions (L×W×H) | LH-72: 84×54×100 cm |
| LH-150 | 95×65×113 cm |
| Construction | Double-wall insulated chamber with stainless steel interior (SUS304), aluminized steel exterior, silicone door gasket, over-temperature protection, PID temperature controller with digital display |
| Brand | LabCompanion |
|---|---|
| Model | LP |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Capable) |
| Type | Benchtop-to-Floor-Standing Programmable Climatic Chamber |
| Temperature Range | -70°C to +150°C (selectable sub-ranges: 0–150°C, -20–150°C, -40–150°C, -60–150°C, -70–150°C) |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±0.2°C |
| Temperature Deviation | ±2.0°C |
| Humidity Fluctuation | ±2.0% RH |
| Humidity Deviation | ±2.0% RH |
| Heating Rate (no load, ambient to target) | 4–7°C/min |
| Cooling Rate (no load, ambient to target) | 0.7–1.0°C/min |
| Chamber Internal Dimensions | 1000 × 1000 × 1000 mm (W×D×H) |
| Insulation | High-density ultra-fine glass fiber (≥150 mm thickness, multi-layered) |
| Humidification System | External boiler-type steam generator with energy recovery design (≈70% power reduction vs. conventional resistive humidifiers) |
| Control System | Japanese-made digital touch-panel PID microprocessor controller with SSR solid-state relays |
| Safety Protections | Leakage current protection, over-temperature cut-off, door-open alarm, low-water-level detection, real-time fault diagnostics |
| Compliance | Designed per IEC 60068-2 series environmental testing standards |
| Brand | LabCompanion |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | LP |
| Capacity Options (L) | 80, 120, 150, 225, 408, 800, 1000 |
| Temperature Ranges | H (0 to +150°C), R (−20 to +150°C), L (−40 to +150°C), U (−60 to +150°C), S (−70 to +150°C) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±1.0% RH |
| Heating Rate | −20→+150°C ≤60 min |
| Cooling Rate | +20→−70°C ≤80 min |
| Control System | Q8 Touchscreen Controller |
| Refrigeration | Hermetic Twin-Screw Compressor (Tecumseh/Tecumseh-compatible or equivalent, R404A/R507 alternative refrigerant) |
| Construction | Interior – Mirror-Finish SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, IEC 60068-2-1/-2/-14, MIL-STD-810D, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LP-120 |
| Price | Upon Request |
| Temperature Range | 0°C to 100°C |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | +2 / –3% RH |
| Heating Rate (0°C → 100°C) | ~35 min |
| Cooling Rate (100°C → 0°C) | ~40 min |
| Control Accuracy | ±0.1°C (temp), ±1% RH (humidity) |
| Sensor Type | PT100 Platinum Resistance Thermometer |
| Power Supply | AC 380V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Compliance Standards | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LP-150U |
| Temperature Range | −20 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH (≥75 %RH) |
| Internal Dimensions (W×H×D) | 500×600×500 mm |
| Cooling Method | Air-Cooled |
| Refrigeration Unit | Imported Hermetic Compressor (Tecumseh or Embraco) |
| Controller | Q8-901 Bilingual (English/Chinese) Programmable Touchscreen HMI |
| Compliance | GB/T 10586, GB/T 2423.1–4, IEC 60068-2-1/2/3, MIL-STD-810F, JIS C60068-2, JESD22-A101-B/A103-C/A119 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LP120 |
| Temperature Range | −70 °C to 150 °C (selectable setpoints: 0 °C / −20 °C / −40 °C / −70 °C up to 100 °C or 150 °C) |
| Humidity Range | 20–98 % RH |
| Refrigeration Method | Compressor-based cooling |
| Explosion-Proof | Standard (non-explosion-proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Humidity Stability | ±1.0 % RH |
| Humidity Uniformity | ±3.0 % RH |
| Heating Rate | −70 °C → 100 °C in ≈45 min (YTH-X configuration) |
| Cooling Rate | 20 °C → −70 °C in ≈70 min (YTH-X configuration) |
| Internal Chamber Dimensions (W×D×H) | 60 × 50 × 40 cm |
| Control System | Mitsubishi PLC with 120 mm × 90 mm color touchscreen interface |
| Programming Capacity | 4 programs, up to 100 segments total |
| Control Resolution | 0.1 °C / 0.1 % RH |
| Compliance | EN 60204-1, ISO 9001, CNS, JIS, ASTM, DIN, BS, EIA, HKQ (Hong Kong Quality Assurance Scheme) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LRH-50CL |
| Temperature Range | −40 °C to +65 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C (High Temp), ±1.0 °C (Low Temp) |
| Temperature Uniformity | ±0.1 °C |
| Temperature Deviation | ±2.0 °C |
| Internal Chamber Dimensions (W×D×H) | 400 mm × 300 mm × 420 mm |
| Refrigerant | R134a |
| Test Port | Ø25 mm (Left Side Wall) |
| Standard Controller | Digital Microprocessor-Based Temperature Controller |
| Optional Features | RS485 Interface, Thermal Printer Support, Multi-Stage Programmable Logic Control (7 Programs × 9 Steps Each, 1–9999 min/step) |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Internal Dimensions (W×D×H) | 40×40×50 cm |
| External Dimensions (W×D×H) | 107×72×135 cm |
| Temperature Range | 0 to +150°C |
| Humidity Range | 10–98% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±2% RH |
| Temperature Uniformity | ±0.1°C |
| Humidity Uniformity | ±4% RH |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | High-density PU foam + silicone rubber gasket |
| Heating System | Stainless steel sheathed high-speed heating elements |
| Humidification System | Steam generation type |
| Refrigeration System | Imported high-efficiency compressor |
| Control System | Digital SSR + PID controller with LCD interface |
| Standard Features | Vacuum-sealed double-glazed observation window, adjustable stainless steel shelves, interior LED lighting, castor wheels |
| Safety Protections | Over-temperature cutoff, over-current protection, compressor overload protection, low-water-level alarm |
| Power Supply | AC 1/3-phase, 220/380 V, 50/60 Hz |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Temperature Range | -70 °C to 150 °C |
| Humidity Range | 10–98 %RH |
| Temperature Control Accuracy | ±0.3 °C |
| Humidity Control Accuracy | ±2 %RH |
| Temperature Uniformity | ±0.1 °C |
| Humidity Uniformity | ±4 %RH |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam + Silicone Sponge Seals |
| Heating System | Stainless Steel Sheathed Immersion Heaters |
| Humidification | Steam Generator Type |
| Refrigeration System | Imported High-Efficiency Compressor |
| Control System | Digital SSR + PID Controller with LCD Interface |
| Power Supply | AC 1/3 Phase, 220/380 V, 50/60 Hz |
| Safety Protections | Over-Temperature, Over-Current, Compressor Overload, Low-Water Level |
| Optional Accessories | Vacuum-Glass Viewing Window, Programmable Shelf Racks, LED Interior Lighting, Casters |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 10–98% RH |
| Control Accuracy | ±0.3°C / ±2% RH |
| Uniformity | ±0.1°C / ±4% RH |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam + Silicone Foam Gasket |
| Heating System | Stainless Steel Sheathed Immersion Heater |
| Humidification | Steam Generator Type |
| Refrigeration System | Imported High-Efficiency Compressor |
| Control System | Digital SSR + PID Controller with LCD Interface |
| Safety Protections | Over-Temperature, Over-Current, Compressor Overload, Low-Water Level |
| Power Supply | AC 1/3 Phase, 220/380 V, 50/60 Hz |
| Standard Internal Dimensions (W×D×H) | 100 × 80 × 100 cm |
| Compliance | Designed for ASTM D4329, ISO 4892-2, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, and GLP-aligned test documentation workflows |
| Brand | LabCompanion |
|---|---|
| Model | LT-150 |
| Temperature Range | –40 °C to +150 °C |
| Humidity Range | 10–98 %RH |
| Control Accuracy | ±0.3 °C / ±2 %RH |
| Uniformity | ±0.1 °C / ±4 %RH |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | High-Density PU Foam + Silicone Sponge Gasket |
| Heating System | Stainless Steel Sheathed Immersion Heater |
| Humidification | Steam Generator (PID-Controlled) |
| Refrigeration | Imported High-Efficiency Compressor |
| Controller | Programmable Digital PID with LCD Interface |
| Power Supply | AC 3-Phase 380 V, 50/60 Hz |
| Compliance | Designed per IEC 60068-2 series, ASTM D4332, ISO 16750-4, and JEDEC JESD22-A101 for LED reliability validation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | LT-150 |
| Temperature Range | –40°C to +150°C |
| Humidity Range | 10–98% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±2% RH |
| Temperature Uniformity | ±0.1°C |
| Humidity Uniformity | ±4% RH |
| Interior Dimensions (W×D×H) | 50×60×75 cm |
| Exterior Dimensions (W×D×H) | 117×92×160 cm |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | High-Density Polyurethane Foam + Silicone Foam Seals |
| Heating System | Stainless Steel Sheathed Immersion Heaters |
| Humidification | Steam Generator with RO-Purified Water Supply |
| Refrigeration System | Imported High-Efficiency Compressor |
| Control System | Digital PID Controller with SSR Output |
| Standard Features | Vacuum Double-Glass Viewing Window, Adjustable Shelving, Interior LED Lighting, Casters, Linear Analog Outputs (0–10 V / 4–20 mA) for External Data Logging |
| Safety Protections | Over-Temperature, Over-Current, Compressor Overload, Low-Water-Level, Phase Failure Detection |
| Power Supply | 3-Phase AC 380 V / 50 Hz (Customizable for 60 Hz or Single-Phase) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-150-3P |
| Pricing | Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-252-3PA |
| Temperature Range (High Zone) | +60 °C to +200 °C |
| Temperature Range (Low Zone) | −65 °C to −10 °C |
| Internal Chamber Dimensions | 80 × 80 × 75 cm |
| Temperature Resolution | ±0.1 °C |
| Control System | PID with ETAC830 Touchscreen Controller (10.4″ TFT, Multi-language UI) |
| Program Storage | 1000 programs / 2500 segments |
| Cycle Repetition | Up to 999 cycles |
| Recovery Time (−65 °C → +150 °C) | ≈5 min |
| Cooling Method | Dual-stage mechanical refrigeration (no LN₂ or CO₂ required) |
| Compliance | Designed for ISO 16750-4, JEDEC JESD22-A104, MIL-STD-810H thermal shock protocols |
| Power Supply | AC 3φ 380–415 V ±10%, 50/60 Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-80-2P (Two-Chamber, Specimen-Transfer Design) |
| Temperature Range | −40 °C to +100 °C (optional +150 °C) |
| Low-Temp Chamber | −70 °C to −10 °C |
| High-Temp Chamber | +60 °C to +200 °C |
| Specimen Weight Capacity | 2.5 kg |
| Transfer Time | ≤10 s |
| Temp. Rise Time (−40 °C → +100 °C) | 40 min |
| Temp. Fall Time (+100 °C → −40 °C) | 70 min |
| Chamber Dimensions (L×W×H, mm) | Low-Temp: 400×500×400 |
| High-Temp | 400×400×400 |
| Test Zone | 200×130×200 |
| Control System | Microprocessor-based PID + SSR |
| Refrigerant | Eco-friendly HFC blend |
| Internal Material | SUS304 stainless steel |
| External Finish | Zinc-coated steel with high-grade resin enamel coating |
| Safety Protections | Overheat protection, compressor overload protection, control system overload protection, high/low pressure cut-off switches |
| Optional Interfaces | RS-232 serial communication port |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LTS-80-2P (Two-Chamber Moving Specimen Type) |
| Temperature Range | −40 °C to +100 °C (optional +150 °C) |
| Low-Temp Chamber | −70 °C to −10 °C |
| High-Temp Chamber | +60 °C to +200 °C |
| Specimen Weight Capacity | 2.5 kg |
| Specimen Transfer Time | ≤10 s |
| Temp. Rise Time (−40 °C → +100 °C) | 40 min |
| Temp. Fall Time (+100 °C → −40 °C) | 70 min |
| Test Chamber Dimensions (W×H×D) | 200×130×200 mm |
| Low-Temp Chamber Dimensions | 400×500×400 mm |
| High-Temp Chamber Dimensions | 400×400×400 mm |
| Control System | Microprocessor-based PID + SSR |
| Refrigerant | HFC-series eco-friendly refrigerant |
| Internal Material | SUS304 stainless steel |
| External Material | Galvanized steel with high-grade resin enamel coating |
| Safety Protections | Overheat protection, compressor overload protection, control system overload protection, high/low pressure cut-off switches |
| Optional Interfaces | RS-232 serial communication port |
| Brand | LabCompanion |
|---|---|
| Model | LTS-80-3PA |
| Chamber Type | Three-Zone Static Specimen Configuration |
| Temperature Range (High Zone) | 80–150 °C |
| Temperature Range (Low Zone) | 0 to –65 °C |
| Preconditioning Range | 80–200 °C / 0 to –70 °C |
| Soak Time (High/Low) | 25 min (adjustable) |
| Transfer Time (Recovery) | ≤5 min (configurable) |
| Temperature Stability | ±2 °C |
| Internal Dimensions (W×D×H) | 600×450×400 mm |
| Max. Specimen Weight | 10 kg |
| Power Supply | AC 3-phase, 220/380 V, 50/60 Hz |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong Hongzhan Instrument Co., Ltd.) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | LTS-80-3PA |
| Pricing | Available Upon Request |
| Internal Chamber Dimensions (W×D×H) | 350×400×350 mm |
| External Dimensions (W×D×H) | 1520×1550×1950 mm |
| Max. Test Specimen Weight | 2 kg |
| High-Temperature Zone Range | +80 °C to +150 °C |
| Low-Temperature Zone Range | 0 °C to −65 °C |
| Preconditioning Temperature Range | +80 °C to +200 °C / 0 °C to −70 °C |
| Preconditioning Ramp-Up Time | ~25 min |
| Preconditioning Ramp-Down Time | ~70 min |
| Dwell Time per Temperature Zone | 25 min (adjustable) |
| Transfer Time (Cold ↔ Hot) | ≤5 min (adjustable) |
| Temperature Uniformity | ±2 °C |
| Power Supply | AC 3-phase, 220/380 V, 50/60 Hz |