Environmental Test Chamber
Filter
Showing 2551–2580 of 3663 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70°C to +150°C (Model-Dependent) |
| Humidity Range | 20–98% RH (Optional: 5–98% RH) |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±2°C |
| Humidity Fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Up to 4.0°C/min (heating), ~1.0°C/min (cooling) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Port | One 50 mm diameter test port (left side) |
| Construction | Interior & exterior chambers fabricated from SUS#304 stainless steel |
| Refrigeration System | Hermetically sealed, low-noise dual-stage compressor with eco-friendly refrigerants (R404A/R23) |
| Control System | Full-color touchscreen controller with English/Chinese language toggle |
| Safety Features | Real-time fault detection, automatic power cutoff, over-temperature/over-humidity protection, door interlock |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C (selectable models) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Internal Volume | 80–1000 L (6 models) |
| Construction | SUS#304 Stainless Steel |
| Refrigeration System | Hermetic Dual-Stage Compressor with R404A/R23 Eco-Friendly Refrigerants |
| Controller | Touchscreen LCD with English/Chinese Interface |
| Standards Compliance | IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Cyclic Humidity), -2-78 (Steady-State Humidity), GB/T 2423.1–2423.4, GJB 150.3–150.4 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Rapid TC Range | −45 °C to +85 °C or −20 °C to +85 °C |
| Ramp Rates | 5–25 °C/min (configurable) |
| Temp. Uniformity | ±2 °C |
| Humidity Uniformity | ±3.0% RH (≥75% RH) |
| Temp. Stability | ±0.5 °C |
| Humidity Stability | ±2.5% RH |
| Interior Material | SUS#304 Stainless Steel |
| Refrigeration | Hermetic Dual-Stage Compressor System with R404A/R23 Eco-Friendly Refrigerants |
| Controller | LCD Touchscreen with English/Chinese UI |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Brand | Other Brands |
|---|---|
| Model Range | OK-TH-80 / OK-TH-150 / OK-TH-225 / OK-TH-408 / OK-TH-800 / OK-TH-1000 |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | -70 °C to +150 °C (configurable in four standard spans) |
| Humidity Range | 20–98 %RH (optional: 5–98 %RH or 10–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Stability | ±2 °C |
| Humidity Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Refrigeration System | Hermetic dual-stage compressor with eco-friendly R404A/R23 refrigerant blend |
| Controller | LCD touch-screen interface with bilingual (English/Chinese) operation |
| Construction Material | SUS#304 stainless steel interior and exterior |
| Standard Accessories | One Φ50 mm cable port, two adjustable SUS#304 shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Compliance | MIL-STD-810G (via GJB150.3/4), IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Damp Heat, cyclic), -2-78 (Damp Heat, steady-state), GB/T 2423.1–2423.4 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | -70 °C to +150 °C (configurable models) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film |
| Port | One Ø50 mm test port (left side) |
| Construction | Interior & exterior SUS#304 stainless steel |
| Refrigeration | Hermetic low-noise dual-stage compressor system with R404A/R23 eco-friendly refrigerants |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C (configurable models) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Refrigeration System | Hermetic dual-stage compressor with eco-friendly R404A/R23 refrigerant blend |
| Control Interface | Touchscreen LCD controller with bilingual (English/Chinese) UI |
| Construction Material | SUS#304 stainless steel interior and exterior |
| Standard Accessories | One Ø50 mm cable port, two adjustable stainless steel shelves, four casters with leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Compliance | MIL-STD-810G (via GJB150.3/4), IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Damp Heat, Cyclic), -2-78 (Damp Heat, Steady-State), GB/T 2423.1–2423.4 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C (configurable models) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Access Port | Ø50 mm test port (left side) |
| Refrigeration System | Hermetic low-noise dual-stage compressor (R404A/R23) |
| Controller | Color TFT touchscreen, bilingual (English/Chinese) |
| Compliance | MIL-STD-810G (GJB150.3/4), IEC 60068-2-1 (Cold), -2 (Dry Heat), -30 (Damp Heat Cycling), -78 (Steady-State Damp Heat), GB/T 2423.1–4 |
| Brand | Other Brands |
|---|---|
| Model | OK-TS–100 / OK-TS–250 / OK-TS–500 / OK-TS–1000 |
| Temperature Range | –70 °C to +150 °C (selectable) |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Ramp Rate | ≥2–3 °C/min (heat-up), ≤1 °C/min (cool-down) |
| Interior Material | Stainless Steel (AISI 304) |
| Exterior Material | Powder-Coated Baosteel Cold-Rolled Steel |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Heating System | Nickel-Chromium Alloy Heaters |
| Cooling System | Finned Multi-Stage Evaporator with Single- or Dual-Stage (Cascade) Refrigeration |
| Compressor | Hermetic Tecumseh/Tecumseh-derived “Tecumseh” (France-sourced) |
| Air Circulation | Single-Circuit, Extended-Shaft Low-Noise Stainless Steel Centrifugal Blower |
| Sealing | High-Performance Silicone Rubber Gasket |
| Viewing Window | Double-Layer Tempered Glass with Interior LED Illumination |
| Control System | Imported High-Precision Digital Display Controller with PID Algorithm and Imported Actuators |
| Compliance | Designed per IEC 60068-2-14, ASTM D5229/D5229M, MIL-STD-810H Method 503.7 |
| Key | Temperature Range: 105–132 °C (control point) |
|---|---|
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Control Point | 100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kgf/cm²) |
| Ramp Time (Ambient to 132 °C) | ≤35 min |
| Pressure Ramp Time (Ambient to 0.196 MPa) | ≤40 min |
| Auto-refill Function | Yes |
| Safety Interlocks | Door latch, overpressure relief, dual overtemperature cutoff, steam quality management via condensate purge |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Temperature Range | +100 °C to +132 °C (saturated steam) |
| Humidity | 100% RH (steam-saturated) |
| Operating Pressure | 1.5–3.2 kgf/cm² |
| Max Internal Pressure Rating | 4.0 kgf/cm² |
| Pressure Ramp Time (to 1.04 kgf/cm²) | ~45 min |
| Time Setting Range | 000–999 h |
| Temp. Uniformity | ±0.5 °C |
| Temp. Resolution | 0.1 °C |
| Pressure Uniformity | ±0.2 kgf/cm² |
| Programmable Steps | 100 segments per program × 10 programs |
| Cycle Repetition | up to 999 loops |
| Power Supply Interface | One 50 mm test port (left side) with plug |
| Construction | Interior & exterior SUS#304 stainless steel |
| Insulation | High-density fire-retardant PU foam |
| Anti-sweat System | K-type thermocouple heat tracing + film-type heating wires |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +110°C to +132°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Stability | ±0.5°C |
| Humidity Range | 100% RH (Saturated Steam) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range (Gauge) | 0–2 kg/cm² (Optional: 0–4 kg/cm²) |
| Absolute Pressure Range | 1.0–3.0 kg/cm² |
| Maximum Safety Pressure Capacity | 4 kg/cm² (1 atm + 3 kg/cm²) |
| Ramp Time (Ambient to 132°C, unloaded) | ~30 min |
| Pressurization Time (0 → 2 kg/cm²) | ~30 min |
| Test Duration Setting | 0–999 hours |
| Circulation Method | Natural Convection of Saturated Steam |
| Compliance | GB/T 10586–1989, GB/T 2423.3–2016 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9A–2009, GB/T 2423.34–2012 (IEC 60068-2-52), MIL-STD-883C Method 1004.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,050 (approx. ¥29,000) |
| Temperature Range | 110°C / 132°C (saturated steam) |
| Humidity | 100% RH (saturated) |
| Pressure Range | 0.5–2.0 kg/cm² (max safety capacity: 3.5 kg/cm²) |
| Time Setting Range | 0–999 h |
| Temperature Uniformity | ±2.0°C |
| Heating Time | ≤35 min (RT to 132°C at control point) |
| Pressurization Time | ≤40 min (0 → 2.0 kg/cm² at control point) |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Control System | Microprocessor-based PID + SSR with independent saturated steam temperature/time/pressure display |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C |
| Humidity Range | 100 % RH (Saturated Steam) |
| Pressure Range | 0–4 kg/cm² above atmospheric pressure |
| Chamber Dimensions (Internal) | Φ25×40 cm (PCT-25) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range (Hot Zone) | +80°C to +200°C |
| Temperature Range (Cold Zone) | −10°C to −70°C |
| Operational Test Range | −40°C to +150°C |
| Temperature Control Accuracy | ±2°C |
| Temperature Resolution | 0.01°C |
| Hot Zone Ramp Rate | ≤40 min (from 25°C to 150°C) |
| Cold Zone Ramp Rate | ≤100 min (from 25°C to −70°C) |
| Test Zone Temperature Recovery Time | 3–5 min |
| Internal Dimensions (W×H×D) | 600 × 500 × 500 mm |
| External Dimensions (W×H×D) | 1500 × 2100 × 2250 mm |
| Construction | Dual-chamber (hot/cold) + test chamber |
| Inner/Outer Material | SUS#304 stainless steel (mirror-finished) |
| Insulation | High-density glass wool + rigid polyurethane (PU) foam |
| Condensation Prevention | K-type thermocouple-based anti-sweat system |
| Seals | High-tensile elastomeric packing rated for −200°C to +400°C |
| Actuation | Pneumatic hot/cold zone isolation valves |
| Accessories | Two adjustable stainless-steel test trays |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | −70 °C to +170 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Recovery Time | ≤5 min |
| High-Temp Soak | ≥30 min at +150 °C |
| Low-Temp Soak | ≥30 min at −40 °C |
| Specimen Transfer Method | Pneumatic |
| Max Specimen Weight | 3 kg |
| Heating Rate | +25 °C → +170 °C in 30 min |
| Cooling Rate | +25 °C → −55 °C in 65 min |
| Noise Level | ≤65 dB(A) |
| Power Supply | AC 380 V ±10%, 50/60 Hz with protective earth |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Rapid Thermal Transition Range | −45 °C to +85 °C |
| Max. Linear Ramp Rate | 15 °C/min |
| Humidity Range (Optional) | 20–98% RH (extendable to 5–98% RH on request) |
| Temp. Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Uniformity | ±2.0 °C / ±3.0% RH |
| Sample Load Capacity | ≥30 kg |
| Construction | Exterior – Powder-coated carbon steel |
| Cooling Method | Air-cooled or water-cooled |
| Viewing Window | 350 × 250 mm electrically heated, anti-fog, low-emissivity coated |
| Cable Port | Sliding conduit with sealing gasket |
| Illumination | Moisture-resistant LED chamber lighting |
| Sample Shelf Drive | Pneumatic dual-acting cylinder with German indirect-type position sensor |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | -40 to 100 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±1 °C |
| Humidity Uniformity | ±5% RH |
| Ramp Rate | ~4.0 °C/min (heating), ~1.0 °C/min (cooling) |
| Construction Material | SUS304 Stainless Steel (matte finish, interior and exterior) |
| Cooling System | Air-cooled, single-stage compressor (down to -20 °C) |
| Door Configuration | Dual front-and-rear access doors |
| Shelf System | LCD-adjustable-angle fixtures |
| Load Validation Medium | Aluminum plates (not plastic) |
| Safety Protections | Fuseless circuit breaker, compressor overload protection, refrigerant high/low pressure switches, over-temperature cut-off, fuse, fault alert system |
| Insulation Material | High-density ethyl chloroformate-based polyurethane foam (heat-resistant) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20°C to +150°C / -40°C to +150°C / -50°C to +150°C / -60°C to +150°C / -70°C to +150°C / -85°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Stability | ±0.5°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Deviation | ≤±2.0°C |
| Heating Rate (non-linear, unloaded) | -20°C to +150°C in <45 min |
| Cooling Rate (non-linear, unloaded) | +20°C to -20°C in <45 min |
| Humidity Fluctuation | ±1% RH |
| Humidity Uniformity | ±3.0% RH |
| Inner Chamber Material | Mirror-finish SUS304 stainless steel |
| Outer Chamber Material | SUS304 stainless steel or rust-inhibited cold-rolled steel with powder-coated white finish |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range (Hot Zone) | +80°C to +200°C |
| Temperature Range (Cold Zone) | −10°C to −70°C |
| Operational Test Range | −40°C to +150°C |
| Temperature Control Accuracy | ±2°C |
| Temperature Resolution | 0.01°C |
| Hot Zone Ramp Rate (RT to +150°C) | ≤40 min |
| Cold Zone Ramp Rate (RT to −70°C) | ≤100 min |
| Test Zone Temperature Recovery Time | 3–5 min |
| Internal Dimensions (W×H×D) | 600 × 500 × 500 mm |
| External Dimensions (W×H×D) | 1500 × 2100 × 2250 mm |
| Construction Material | SUS#304 Stainless Steel (Interior & Exterior) |
| Insulation | High-Density Glass Wool + Rigid Polyurethane (PU) Foam |
| Anti-Sweat System | K-Type Thermocouple-Based Thermal Compensation |
| Actuation Method | Pneumatic Dual-Zone Door Switching |
| Accessories | High-Tensile Packing (−200°C to +400°C), Dual Adjustable Test Shelves |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (approx.) |
| Thickness Range | 0.03–99 µm |
| Potential Difference Range | −100 to +400 mV |
| Thickness Accuracy | ±10% |
| Potential Difference Accuracy | ±5% |
| Reproducibility | <5% RSD |
| Display | 4-digit LED, two decimal places |
| Temperature Control (Chamber) | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Saturated Air Chamber Temp | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Heating Tank Safety Limit | 0–120 °C |
| Saturated Air Tank Safety Limit | 0–120 °C |
| Timer Range | 9.9 s–9990 h |
| Elapsed Time Meter | 0–9999.9 h |
| Air Pressure Regulator | Precision filter included |
| Pressure Gauge | 0–2.5 kg/cm², accuracy 0.01 kg/cm² |
| Toggle Switch | Illuminated, rated for ≥20,000 actuations |
| Key | Temperature Range: –40 °C to +150 °C (optional down to –120 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (customizable to 220 V) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with electrostatic powder coating |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (approx.) |
| Temperature Range | −40°C to +150°C (standard) |
| Humidity Range | 20%–98% RH |
| Control Accuracy | ±0.5°C / ±2.5% RH |
| Uniformity | ±1.0°C / ±3.0% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2021, MIL-STD-2164A |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 5170.2–2017, GB/T 11158–2012, GB/T 10592–2023 |
| Control System | 7" or 10" Touchscreen PID Controller with Ethernet/RS-232/RS-485 Interface |
| Refrigeration | Dual-stage cascade refrigeration system with hermetic Tecumseh (France) compressors |
| Interior Material | Electropolished 304 stainless steel, full TIG-welded seams |
| Exterior Material | Powder-coated or polyurethane-coated structural steel |
| Vibration Integration | Standard mounting interface for electrodynamic or servo-hydraulic shakers |
| Data Logging | Onboard SD/USB storage, email/SMS alarm notifications, audit-trail-capable event logging |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | Ambient +20°C to 500°C |
| Heating Method | PID-controlled SSR-driven Far-Infrared Ni-Cr Alloy Heater (2 kW × 1) |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Cabinet Material | 1.2 mm Cold-Rolled A3 Steel with Powder-Coated Finish |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Wool |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Resistant Turbine Fan |
| Over-Temperature Protection | Dual-Stage Thermal Cut-Off System |
| Compliance | Designed per IEC 60068-2-2, ASTM D3418, and ISO 17025-relevant environmental test infrastructure requirements |
| Brand | Ouke |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Imported Components |
| Price | USD 2,650 (FOB Guangdong) |
| Internal Dimensions (W×H×D, mm) | 500×600×500 to 1000×1000×1000 |
| External Dimensions (W×H×D, mm) | 1750×2250×2350 to 2350×2800×3000 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (Optional) | 20–98% RH |
| Rapid Thermal Transition Range | −45 °C to +85 °C |
| Rapid Thermal Transition Accuracy | ±3.0 °C |
| Ramp Rates | 5–30 °C/min (Linear or Nonlinear Mode, Selectable) |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Control Stability | ±0.5 °C |
| Humidity Control Stability | ±2.5% RH |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Chamber Material | Cold-Rolled Steel with Powder Coating or Stainless Steel |
| Insulation | High-Density Polyurethane Foam (CFC-Free) |
| Refrigeration System | Water-Cooled |
| Compressor | Tecumseh (France) or Bitzer (Germany) |
| Power Supply | AC 380 V, 3-Phase 5-Wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Brand | Ouke |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 105–132 °C (control point) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kg/cm², control point) |
| Heating Time | 35 min (ambient to 132 °C) |
| Pressurization Time | 40 min (ambient to 2 kg/cm²) |
| Capacity | Standard chamber configuration for automotive subassemblies and electronic packages |
| Safety Features | Dual interlocked circular door, automatic pressure relief, vacuum pre-conditioning, real-time LED timer with start-trigger logic, fault-indicating safety LIMIT system |
| Compliance | Designed per IEC 60068-2-66, JESD22-A102D, MIL-STD-202G Method 108, and aligned with JEDEC A110B for HAST/PCT testing protocols |
| Brand | Ouke |
|---|---|
| Model Series | KS-TH-100 / KS-TH-225 / KS-TH-500 / KS-TH-800 / KS-TH-010 |
| Internal Dimensions (D×W×H, mm) | 450×450×500 |
| External Dimensions (D×W×H, mm) | 1100×750×1000 |
| Construction | Exterior – Cold-rolled carbon steel with phosphating + electrostatic powder coating OR SUS304 stainless steel brushed finish |
| Temperature Range | +10°C to +150°C |
| Humidity Range | 85–98% RH |
| Temp. Uniformity/Fluctuation | ±2°C / ±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 1–3°C/min |
| Controller | Microprocessor-based integrated temperature & humidity controller |
| Set/Display Resolution | 0.1°C / 1% RH |
| Sensor | PT100 platinum resistance thermometer & capacitive RH sensor |
| Heating System | Independent nickel-chromium alloy heater |
| Humidification | External isolated stainless steel shallow-surface evaporative humidifier |
| Dehumidification | Evaporator coil dew-point contact method |
| Water Supply | Auto-controlled with condensate recovery |
| Air Circulation | High-efficiency low-noise AC motor + multi-blade centrifugal impeller |
| Safety Protections | Over-temperature, over-current, leakage, short-circuit, dry-run, motor overheat, water shortage |
| Power Supply | AC 380V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Ambient Operating Conditions | 5–30°C, ≤85% RH |
| Energy-Saving Technology | PWM-controlled refrigerant flow regulation (cold/hot bypass + main circuit) enabling compressor-only low-temp stabilization — ~40% energy reduction vs. conventional PID-heating compensation methods |
| Compliance Context | Designed for test execution per IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-30 (Damp Heat, Cycling), MIL-STD-810H Method 502.6 & 507.6, and supports GLP/GMP-aligned validation protocols including IQ/OQ documentation traceability |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-4000 |
| Power Supply | 220 V AC ±10% |
| Max Operating Pressure | 2.5 MPa |
| Burst Pressure | 2.7–3.3 MPa |
| Temperature Control Range | Ambient to 200 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Dimensions (W×D×H) | 560 × 420 × 670 mm |
| Bomb Volume | 4000 cm³ |
| Heating Power | 2.4 kW |
| Temperature Display | Digital, Intelligent PID Control |
| Bomb Construction | Inner chamber — AISI 304 stainless steel |
| Safety Features | Adjustable over-temperature alarm (0–200 °C), pressure relief valve, dual interlock lid mechanism |